People think that their images are corrupted when in fact there are just some
leaked clusters. Differentiating several error cases should make the messages
more comprehensible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes exit(1) from error(), and properly releases
resources such as a block driver and an allocated memory.
For testing the Sheepdog block driver with qemu-iotests, it is
necessary to call bdrv_delete() before the program exits. Because the
driver releases the lock of VM images in the close handler.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch enables protocol drivers to use their create options which
are not supported by the format. For example, protcol drivers can use
a backing_file option with raw format.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img rebase must always give clusters in the COW file priority over those
in the backing file. As it failed to use number of non-allocated clusters but
assumed the maximum, it was possible that allocated clusters were taken from
the backing file instead, leading to a corrupted output image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a 'resize' command to grow/shrink disk images. This
allows changing the size of disk images without copying to a new image
file. Currently only raw files support resize.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes the problem that qemu-img's use of no_zero_init only considered the
no_zero_init flag of the format driver, but not of the underlying protocols.
Between the raw/file split and this fix, converting to host devices is broken.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be BDRV_O_FLAGS instead of BRDV_O_FLAGS.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several commands have code to create a BlockDriverState and open a file.
The bdrv_new_open() function can be used to perform these steps. This
patch converts the qemu-img commands to actually use bdrv_new_open().
Replaced the bdrv_new_open() 'readonly' argument with bdrv_open()-style
flags to support generic flags like BDRV_O_NO_BACKING.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we changed all create calls to return errno, just print it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow the user to specify the format of the image to rebase.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When qemu-img can't open the new backing file for a rebase, it prints an error
message which contains the file name of the old backing file. This is wrong,
obviously.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a possible read beyond the end of the temporary buffers used for
comparing data in the old and the new backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The default stack size of PE is 1MB on win32 and IO_BUF_SIZE in
img_convert() & img_rebase() is 2MB, so qemu-img will crash when doing
"convert" & "rebase" on win32.
Although we can improve the stack size of PE to resolve it, I think we
should avoid using the huge stack variables.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 03cbdac7 "Disable fall-back to read-only when cannot open drive's
file for read-write" result in read-only image can't be used as backed
image in qemu-img.
Cc: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Other choices include using "(printf)", but this one is not bad in
terms of readability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Found some places that seems needs this explicitly, now that
read-write is not the default.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a rebase subcommand to qemu-img which allows to change the backing
file of an image.
In default mode, both the current and the new backing file need to exist, and
after the rebase, the COW image is guaranteed to have the same guest visible
content as before. To achieve this, old and new backing file are compared and,
if necessary, data is copied from the old backing file into the COW image.
With -u an unsafe mode is enabled that doesn't require the backing files to
exist. It merely changes the backing file reference in the COW image. This is
useful for renaming or moving the backing file. The user is responsible to make
sure that the new backing file has no changes compared to the old one, or
corruption may occur.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If an image references a backing file that doesn't exist, qemu-img info fails
to open this image. Exactly in this case the info would be valuable, though:
the user might want to find out which file is missing.
This patch introduces a BDRV_O_NO_BACKING flag to ignore the backing file when
opening the image. qemu-img info is the first user and provides info now even
if the backing file is invalid.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Valid description taken from qemu-img.texi, although it would be better
to have this information recorded in only one place.
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I haven't heard yet of anyone using qemu-img to copy an image to a real floppy,
but it's a valid use case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The old options are still supported for compatibility, but they are
inconsistent (for example create -b vs. convert -B for backing files) and
incomplete (-F only exists for create) which tends to confuse people. Remove
all references to the old options from the documentation to guide users to the
more consistent -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A size of 0 should be valid and cannot be treated as "missing value". Use -1
for this purpose instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch increases the maximum qcow2 cluster size to 2 MB. Starting with 128k
clusters, L2 tables span 2 GB or more of virtual disk space, causing 32 bit
truncation and wraparound of signed integers. Therefore some variables need to
use a larger data type.
While being at reviewing data types, change some integers that are used for
array indices to unsigned. In some places they were checked against some upper
limit but not for negative values. This could avoid potential segfaults with
corrupted qcow2 images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make 'qemu-img convert' copies unallocated parts of the source image
when -B option was not specified.
Signed-off-by: Akkarit Sangpetch <asangpet@andrew.cmu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use hxtool to generate the 'command syntax' section of qemu-img's help
message, and the corresponding section of the texinfo documentation.
This has the side-effect of adding 'check' to this list of commands in
the texinfo documentation.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Update the documentation to reflect the introduction of format specific options
with -o. Don't advertise -e or -6 any more, they exist only for compatibility
reasons and can be replaced by the corresponding -o options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a small help text to each of the options in the block drivers
which can be displayed by using qemu-img create -f fmt -o ?
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is part two of the qemu-img conversion. This really works the same as the
previous conversion of qemu-img create: It introduces a new -o option for the
generic approach and adds the old-style options to this option set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch changes qemu-img to actually use the new bdrv_create interface. It
translates the old-style qemu-img options which have been bdrv_create2
parameters or flags so far to option structures. As the generic approach, it
introduces an -o option which accepts any parameter the driver knows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.
bdrv_create2() contains an emulation of the old interface to simplify the
transition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>
From: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can provide check functions, expose them through
qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
The algorithm from the VHD specification for CHS calculation silently limits
images to 127 GB which may confuse a user who requested a larger image. Better
output an error message and abort.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7109 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows the use a host_device as the destination for "qemu-img
convert".
I added a ->bdrv_create function host_device. It merely verifies that
the device exists and is large enough.
A check is needed in the qemu-img convert loop to ensure that we write
out all 0 sectors to the host_device. Otherwise they end up with stale
garbage where all zero sectors were expected.
I also made the check against bdrv_is_allocated enabled for everything
_except_ host devices, since there is no point in making the block
backend write a bunch of zeros just so that we can memcmp them
immediately afterwards. Host devices can't benefit from this because
there is no way to differentiate between a sector being unallocated
because it was never written, or because it was written with all zeros
and then made a trip through qemu-img convert.
Finally, there is an unrelated fix for a typo in the error message
printed if the destination device does not support ->bdrv_create.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6978 c046a42c-6fe2-441c-8c8c-71466251a162
If the user specifies the backing file format,
then when opening the backing file, there is no need
to probe the (backing file) image to figure out its format.
This follows my previous patches implementing bdrv_create2
which keeps (for qcow2 only) the backing file format
as a qcow2-extension
Suggested by Daniel P. Berrange.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6910 c046a42c-6fe2-441c-8c8c-71466251a162
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6812 c046a42c-6fe2-441c-8c8c-71466251a162
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so
let's do it in OS_CFLAGS.
Then, we can pepper in windows.h includes where using #includes that require it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
