The Quad Management Engine (QME) manages power related settings for its
quad. The xscom region is separate from the quad xscoms, therefore a new
region is added. The xscoms in a QME select a given core by selecting
the forth nibble.
Implement dummy reads for the stop state history (SSH) and special
wakeup (SPWU) registers. This quietens some sxcom errors when skiboot
boots on p10.
Power9 does not have a QME.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20230707071213.9924-1-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The P10 core xscom memory regions overlap because the size is wrong.
The P10 core+L2 xscom region size is allocated as 0x1000 (with some
unused ranges). "EC" is used as a closer match, as "EX" includes L3
which has a disjoint xscom range that would require a different
region if it were implemented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230706053923.115003-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add the function name so there's an indication as to where the message
is coming from. Change all prints to use the offset instead of the
address.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230706024528.40065-1-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename TYPE_PPC440_PCIX_HOST_BRIDGE to better match its string value,
move it to common header and use it also in sam460ex to replace hard
coded type name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <1a1c3fe4b120f345d1005ad7ceca4500783691f7.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a QOM type name define for ppc4xx-host-bridge in the common header
and replace direct use of the string name with the constant.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <f6e2956b3a09ee481b970ef7873b374c846ba0a8.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the TYPE_PPC4xx_PCI_HOST_BRIDGE define and its string value to
match each other and other similar types and to avoid confusion with
"ppc4xx-host-bridge" type defined in same file.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <c59c28ef440633dbd1de0bda0a93b7862ef91104.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reduce the iomem region to 64K and use it for the PCI io space and map
it directly from the board without an intermediate alias that is not
really needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <f4ad9af42197a92dd1d0b56c21316dbdad240ee4.1688641673.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The iomem memory region is better used for the PCI IO space but
currently used for registers. Stop using it for that to allow this to
be cleaned up in the next patch.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <3def68f200edd4540393d6b3b03baabe15d649f2.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some places already use get_system_memory() directly so replace the
remaining uses and drop the local variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <d134d64f13258d1f157b445fedb1e86cf3abb606.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After previous changes we can now remove the legacy init function and
move the device creation to board code.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <29aafeea9f1c871c739600a7b093c5456e8a1dc8.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of guessing controller number from dcrn_base add a property so
the device does not need knowledge about where it is used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <fdb84344025e00fadf74d0be95665fcb0ac1e039.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add separate memory regions for the mem and io spaces of the PCIe bus
to avoid different buses using the same system io region.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <b631c3a61729eee2166d899b8888164ebeb71574.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename local variable storing state struct in dcr_read_pcie() for
brevity and consistency with other functions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <7b6f0033ada74075fc094b1397deb406e1a05741.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QOM prefers to call the parent field parent_obj, change
PPC460EXPCIEState ro match that convention.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <6995f28215d2a489a661b7d91a1783048829d467.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is shorter and more readable to wrap the complex call to
ppc_dcr_register() in a macro than to repeat it several times.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <4dec5ef8115791dc67253afdff9a703eb816a2a8.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PCIe controller model uses PPC DCRs but cannot be modeled with
TYPE_PPC4xx_DCR_DEVICE as it derives from TYPE_PCIE_HOST_BRIDGE. Add a
cpu link property to it similar to other DCR devices to allow
registering DCRs from the device model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <a79796654deaa81a6a1c71efc874e4d88c4cafd4.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change parameter of ppc460ex_pcie_init() from env to cpu to allow
further refactoring.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <1695d7cc1a9f1070ab498c078916e2389d6e9469.1688586835.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Set the TIR default value with the SMT thread index, and place some
standard limits on SMT configurations. Now powernv is able to boot
skiboot and Linux with a SMT topology, including booting a KVM guest.
There are several SPRs and other features (e.g., broadcast msgsnd)
that are not implemented, but not used by OPAL or Linux and can be
added incrementally.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This also changes type of sz local variable to ssize_t because it is
used to store return value of load_elf() and load_image_targphys() that
return ssize_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20230704181920.27B58746335@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Firmware now warns if booting in LPAR per core mode (PPC bit 62). So
this warning doesn't trigger, report the core thread state is 0.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-6-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Like the quad xscoms, add a core model for P10 to allow future
differentiation from P9.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-5-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a PnvQuad class for the P10 powernv machine. No xscoms are
implemented yet, but this allows them to be added.
The size is reduced to avoid the quad region from overlapping with the
core region.
address-space: xscom-0
0000000000000000-00000003ffffffff (prio 0, i/o): xscom-0
0000000100000000-00000001000fffff (prio 0, i/o): xscom-quad.0
0000000100108000-0000000100907fff (prio 0, i/o): xscom-core.3
0000000100110000-000000010090ffff (prio 0, i/o): xscom-core.2
0000000100120000-000000010091ffff (prio 0, i/o): xscom-core.1
0000000100140000-000000010093ffff (prio 0, i/o): xscom-core.0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-4-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make the existing pnv_quad_xscom_read/write be P9 specific, in
preparation for a different P10 callback.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-3-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the functions to include P9 in the name in preparation for adding
P10 versions.
Correct the unimp read message while we're changing the function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-2-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On the powernv9 and powernv10 machines, the PSIHB interrupts are
currently initialized with a PQ state of 0b01, i.e. interrupts are
disabled. However real hardware initializes them to 0b00 for the
PSIHB. This patch updates it, in case an hypervisor is in the mood of
checking it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230703081215.55252-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The clock update logic reads the clock twice to compute the new clock
value, with a value derived from the later time subtracted from a value
derived from the earlier time. The delta causes time to be lost.
This can ultimately result in time becoming unsynchronized between CPUs
and that can cause OS lockups, timeouts, watchdogs, etc. This can be
seen running a KVM guest (that causes lots of TB updates) on a powernv
SMP machine.
Fix this by reading the clock once.
Cc: qemu-stable@nongnu.org
Fixes: dbdd25065e ("Implement time-base start/stop helpers.")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230629020713.327745-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HDEC interrupts are edge-triggered on HDECR underflow (notably different
from DEC which is level-triggered).
HDEC interrupts already clear the irq on delivery so that does not need
to be changed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625122045.15544-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
skiboot only uses mmio to access the PSI registers (once the BAR is
set) but we don't have any reason to block the accesses through
xscom. This patch enables xscom access to the PSI registers. It
converts the xscom addresses to mmio addresses, which requires a bit
of care for the PSIHB, then reuse the existing mmio ops.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230630102609.193214-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The 'kvm_sw_tlb' and 'tlb_dirty' fields introduced in commit
93dd5e852c ("kvm: ppc: booke206: use MMU API") are specific
to KVM and shouldn't be accessed when it is not available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230624192645.13680-1-philmd@linaro.org>
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Arguably this is just shuffling around register accesses, but one nice
thing it does is allow the exit to save away the L2 state then switch
the environment to the L1 before copying L2 data back to the L1, which
logically flows more naturally and simplifies the error paths.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.
Have helper functions to save and load this host state.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix missing env->ca restore when going from L2 back to the host.
Fixes: 120f738a46 ("spapr: implement nested-hv capability for the virtual hypervisor")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'bamboo' machine was used as a KVM platform in the early days (~2008).
It clearly doesn't support it anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'prep' machine never supported KVM. This piece of code was
probably inherited from another model.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerMacs have an OHCI controller soldered on the motherboard,
so this should always be enabled for the "mac99" machine.
This fixes the problem that QEMU aborts when the user tries to run
the "mac99" machine with a build that has been compiled with the
"--without-default-devices" configure switch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230530102041.55527-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The decrementer store function has logic that short-cuts the timer if a
very small value is stored (0, 1, or 2) and raises an interrupt
directly. There are two problem with this on BookE.
First is that BookE says a decrementer interrupt should not be raised
on a store of 0, only of a decrement from 1. Second is that raising
the irq directly will bypass the auto-reload logic in the booke decr
timer function, breaking autoreload when 1 or 2 is stored.
Fix this by removing that small-value special case. It makes this
tricky logic even more difficult to reason about, and it hardly matters
for performance.
Cc: sdicaro@DDCI.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530131214.373524-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is possible to store a very large value to the decrementer that it
does not raise the decrementer exception so the timer is scheduled, but
the next time value wraps and is treated as in the past.
This can occur if (u64)-1 is stored on a zero-triggered exception, or
(u64)-1 is stored twice on an underflow-triggered exception, for
example.
If such a value is set in DECAR, it gets stored to the decrementer by
the timer function, which then immediately causes another timer, which
hangs QEMU.
Clamp the decrementer to the implemented width, and use that as the
value for the timer calculation, effectively preventing this overflow.
Reported-by: sdicaro@DDCI.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530131214.373524-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Previously 7400 was selected as a safe choice as that is used by other
machines so it's better tested but AmigaOS does not know this CPU and
disables some features when running on it. The real hardware has
7447/7457 G4 CPU so change the default to match that now that it was
confirmed to work better with AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230528152937.B8DAD74633D@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWER9 DD2.1 and earlier had significant limitations when running KVM,
including lack of "mixed mode" MMU support (ability to run HPT and RPT
mode on threads of the same core), and a translation prefetch issue
which is worked around by disabling "AIL" mode for the guest.
These processors are not widely available, and it's difficult to deal
with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU
and make it the default POWER9 CPU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515160201.394587-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As lpc-hc is designed for re-entrant calls from xscom, mark it
re-entrancy safe.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
[clg: mark opb_master_regs as re-entrancy safe also ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230526073850.2772197-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit cef2e7148e ("hw/isa/i82378: Remove intermediate IRQ forwarder")
passes s->cpu_intr to i8259_init() in i82378_realize() directly. However, s-
>cpu_intr isn't initialized yet since that happens after the south bridge's
pci_realize_and_unref() in board code. Fix this by initializing s->cpu_intr
before realizing the south bridge.
Fixes: cef2e7148e ("hw/isa/i82378: Remove intermediate IRQ forwarder")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230304114043.121024-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The behaviour of the Address Translation Mode on Interrupt resource is
not consistently supported by all CPU versions or all KVM versions: KVM
HV does not support mode 2, and does not support mode 3 on POWER7 or
early POWER9 processesors. KVM PR only supports mode 0. TCG supports all
modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode.
This leads to inconsistencies in guest behaviour and could cause problems
migrating guests.
This was not noticable for Linux guests for a long time because the
kernel only uses modes 0 and 3, and it used to consider AIL-3 to be
advisory in that it would always keep the AIL-0 vectors around, so it
did not matter whether or not interrupts were delivered according to
the AIL mode. Recent Linux guests depend on AIL mode 3 working as
specified in order to support the SCV facility interrupt. If AIL-3 can
not be provided, then H_SET_MODE must return an error to Linux so it can
disable the SCV facility (failure to do so can lead to userspace being
able to crash the guest kernel).
Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0
is implied as the baseline, and AIL-2 is no longer supported by spapr.
AIL-2 is not known to be used by any software, but support in TCG could
be restored with an ail-mode-2 capability quite easily if a regression
is reported.
Modify the H_SET_MODE Address Translation Mode on Interrupt resource
handler to check capabilities and correctly return error if not
supported.
KVM has a cap to advertise support for AIL-3.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515160216.394612-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230512124033.502654-6-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When building QEMU with "--without-default-devices", the pseries
machine fails to start even when running with the --nodefaults option:
$ ./qemu-system-ppc64 --nodefaults -M pseries
Type 'spapr-nvdimm' is missing its parent 'nvdimm'
Aborted (core dumped)
Looks like NVDIMM is a hard requirement for this machine nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230504180521.220404-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bits in cr reg are grouped into eight 4-bit fields represented
by env->crf[8] and the related calculations should be abstracted to
keep the calling routines simpler to read. This is a step towards
cleaning up the related/calling code for better readability.
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503093619.2530487-2-harshpb@linux.ibm.com>
[danielhb: add 'const' modifier to fix linux-user build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ideally, qtest.c should be independent from target specific code, so
we only have to compile it once for all targets. Thus start improving
the situation by moving the pseries related code to hw/ppc/spapr_rtas.c
instead and allow target code to register a callback handler for such
target specific commands.
Message-Id: <20230411183418.1640500-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the PegasosII schematics the PCI interrupt lines are
connected to both the gpp pins of the Mv64361 north bridge and the
PINT pins of the VT8231 south bridge so guests can get interrupts from
either of these. So far we only had the MV64361 connections which
worked for on board devices but for additional PCI devices (such as
network or sound card added with -device) guest OSes expect interrupt
from the ISA IRQ 9 where the firmware routes these PCI interrupts in
VT8231 ISA bridge. After the previous patches we can now model this
and also remove the board specific connection from mv64361. Also
configure routing of these lines when using Virtual Open Firmware to
match board firmware for guests that expect this.
This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
When instantiating a user-created PHB on P9/P10, we don't really have
a reason any more to go through an indirection in pnv_chip_add_phb()
in pnv.c, we can go straight to the right function in
pnv_phb4_pec.c. That way, default PHBs and user-created PHBs are all
handled in the same file. This patch also renames pnv_phb4_get_pec()
to pnv_pec_add_phb() to better reflect that it "hooks" a PHB to a PEC.
For P8, the PHBs are parented to the chip directly, so it makes sense
to keep calling pnv_chip_add_phb() in pnv.c, to also be consistent
with where default PHBs are handled. The only change here is that,
since that function is now only used for P8, we can refine the return
type.
So overall, the PnvPHB front-end now has a pnv_phb_user_get_parent()
function which handles the parenting of the user-created PHBs by
calling the right function in the right file based on the processor
version. It's also easily extensible if we ever need to support a
different parent object.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-5-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function pnv_phb4_get_pec() exposes some internals of the PEC and
PHB logic, yet it was in the higher level hw/ppc/pnv.c file for
historical reasons: P8 implements the PHBs from pnv.c directly, but on
P9/P10, it's done through the CEC model, which has its own file. So
move pnv_phb4_get_pec() to hw/pci-host/pnv_phb4_pec.c, where it fits
naturally.
While at it, replace the PnvPHB4 parameter by the PnvPHB front-end,
since it has all the information needed and simplify it a bit.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-4-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an array on the PEC object to keep track of the PHBs which are
instantiated. The array can be sparsely populated when using
user-created PHBs. It will be useful for the next patch to only export
instantiated PHBs in the device tree.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
MAL properties are declared as uint8_t:
static Property ppc4xx_mal_properties[] = {
DEFINE_PROP_UINT8("txc-num", Ppc4xxMalState, txcnum, 0),
DEFINE_PROP_UINT8("rxc-num", Ppc4xxMalState, rxcnum, 0),
DEFINE_PROP_END_OF_LIST(),
};
Correct the API use by setting the property using
qdev_prop_set_uint8(). No behavioral change.
Fixes: da116a8aab ("ppc/ppc405: QOM'ify MAL")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203145536.17585-7-philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() helpers only work with
TYPE_MC146818_RTC devices. 'memory' in their name refer to
the CMOS region. Rename them as mc146818rtc_get_cmos_data()
and mc146818rtc_set_cmos_data() to be explicit about what
they are doing.
Mechanical change doing:
$ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \
$(git grep -wl rtc_set_memory)
$ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \
$(git grep -wl rtc_get_memory)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-4-philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() methods can not take any
TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one.
Simplify the API by passing a MC146818RtcState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-3-philmd@linaro.org>
isa_bus_irqs() register an array of input IRQs on
the ISA bus. Rename it as isa_bus_register_input_irqs().
Mechanical change using:
$ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \
$(git grep -wl isa_bus_irqs)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-10-philmd@linaro.org>
hw.h only contains the protoype of one function nowadays, hw_error(),
so all files that do not use this function anymore also do not need
to include this header anymore.
Message-Id: <20230216142915.304481-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
Add a way to set a backing store for the mac_nvram. Use -drive
file=nvram.img,format=raw,if=mtd to specify backing file where
nvram.img must be MACIO_NVRAM_SIZE which is 8192 bytes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <1aadee8f0ca0f56cf1b7c45c3944676a07d91de9.1675297286.git.balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
We already have machine in a local variable so no need to use
qdev_get_machine(), also remove now unneeded line break.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <719299533b89aa4516966065eae05c75744f50d3.1672868854.git.balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203194312.33834745712@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Makes the unimplemented region move together with the CCSR address space
if moved by a bootloader. Moving the CCSR address space isn't
implemented yet but this patch is a preparation for it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230125130024.158721-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The "platform" node is available through data->node, so use that instead
of making assumptions about the parent device.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230125130024.158721-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a follow-up on commit 47a0b1dff7 'hw/ppc/mpc8544ds: Add
platform bus': Both mpc85xx boards now have a platform bus
unconditionally.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230125130024.158721-3-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This enables support for the 'dumpdtb' QMP/HMP command for all
e500 machines.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230125130024.158721-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Slightly improve readability of creating the south btidge by cnamging
type of a local variable to avoid some casts within function arguments
which makes some lines shorter and easier to read.
Also remove an unneded line break.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230117214545.5E191746369@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The next commit needs to include hw/ppc/pnv.h from
hw/pci-host/pnv_phb.h. Avoid an inclusion loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-4-armbru@redhat.com>
PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip are defined
in pnv.h. Many users of the header don't actually need them. One
instance is this inclusion loop: hw/ppc/pnv_homer.h includes
hw/ppc/pnv.h for typedef PnvChip, and vice versa for struct PnvHomer.
Similar structs live in their own headers: PnvHomerClass and PnvHomer
in pnv_homer.h, PnvLpcClass and PnvLpcController in pci_lpc.h,
PnvPsiClass, PnvPsi, Pnv8Psi, Pnv9Psi, Pnv10Psi in pnv_psi.h, ...
Move PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip to new
pnv_chip.h, and adjust include directives. This breaks the inclusion
loop mentioned above.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-2-armbru@redhat.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY6M//RYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkaNABAKfQ/zpg2ugr/SmC7Ee9tnFNxDrq
JsNw+roXpUZvnkUZAQCMRm4BxfaXhXikRaSL2ZfGRtybKXki5o3Ez+rLxISiAg==
=gRo7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-12-21:
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
# gpg: Signature made Wed 21 Dec 2022 17:18:53 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu:
target/ppc: Check DEXCR on hash{st, chk} instructions
target/ppc: Implement the DEXCR and HDEXCR
hw/ppc/e500: Move comment to more appropriate place
hw/ppc/e500: Resolve variable shadowing
hw/ppc/e500: Prefer local variable over qdev_get_machine()
hw/ppc/virtex_ml507: Prefer local over global variable
target/ppc/mmu_common: Fix table layout of "info tlb" HMP command
target/ppc/mmu_common: Log which effective address had no TLB entry found
hw/ppc/spapr: Reduce "vof.h" inclusion
hw/ppc/vof: Do not include the full "cpu.h"
target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h"
hw/ppc/e500: Add Freescale eSDHC to e500plat
hw/sd/sdhci: Support big endian SD host controller interfaces
MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TLB entries are set up in mmubooke_create_initial_mapping(), not in
booke206_page_size_to_tlb().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221216145709.271940-7-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assign to the outer variable instead which even saves some code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221216145709.271940-6-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-5-shentey@gmail.com>
[danielhb: remove linebreak in object_property_add_child()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216145709.271940-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently objects including "hw/ppc/spapr.h" are forced to be
target specific due to the inclusion of "vof.h" in "spapr.h".
"spapr.h" only uses a Vof pointer, so doesn't require the structure
declaration. The only place where Vof structure is accessed is in
spapr.c, so include "vof.h" there, and forward declare the structure
in "spapr.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-4-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Adds missing functionality to e500plat machine which increases the
chance of given "real" firmware images to access SD cards.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221018210146.193159-8-shentey@gmail.com>
[PMD: Simplify using create_unimplemented_device("esdhc")]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221101222934.52444-4-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
and use cast to TYPE_PCI_BRIDGE instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221129101341.185621-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc]
Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x]
Reviewed-by: Greg Kurz <groug@kaod.org> [ppc]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-2-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/qdev.json and
qapi/qom.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-21-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This might allow the compiler to check values.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f9da172e486c1f57f8542c7c3cb0223cffa89b1f.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The NVRAM_SIZE constant was defined but not used. Rename it to
MACIO_NVRAM_SIZE to match the device model and use it where appropriate.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <5b53c70438dfb46837af8a094e753706b06c4ec6.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The PROM_FILENAME and KERNEL_* defines are used by mac_oldworld and
mac_newworld but they don't have to be identical so these could be
moved to the individual boards.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <5fa693334adf166d23931c81d81ada4e3441ed7d.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the parts specific to and only used by macio out from the shared
mac.h into macio.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <ac570ce9dcbae169310503689053807b8b4b86bc.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the parts specific to and only used by mac99 out from the shared
mac.h into mac_newworld.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f3c6862de5b51ef49ae0714cf7ee21828d0502cf.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
By storing the device pointers in a variable with the right type the
number of QOM casts can be reduced which also makes the code more
readable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f701e5ae03c806969561a7fd7523ef407db6dc89.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Map regions in ascending order and reorganise code a bit to avoid some
casts and move Uninorth parts together.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <a6263b23757dd4a1e1b17a9aa9fb87115f3a1e71.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Several variables are set in if-else branches where the else branch
can be removed by setting a default value at the variable declaration
which leads to simlpler code that is easier to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <8dac3515b29976a61dacda07752175d7531dca3c.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The tbfreq variable is only set once in an if-else which can be done
at the variable declaration saving some lines of code and making it
simpler.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <15668da8eb8bad4561428a5f25b02f91e16d9c1b.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Drop some more local variables additionally to commit b8df32555c to
match clean ups done to mac_newwold in previous patch.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1b9a448431d9b1198432151af0511316cfc20d21.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Values not used frequently enough may not worth putting in a local
variable, especially with names almost as long as the original value
because that does not improve readability, to the contrary it makes it
harder to see what value is used. Drop a few such variables. This is
the same clean up that was done for mac_oldworld in commit b8df32555c.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <a3ee09dea27af9685fd2ccd2f7ab40a813d6812f.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Convert nanoMIPS disassembler from C++ to C (Milica Lazarevic)
- Consolidate VT82xx/PIIX south bridges (Bernhard Beschow)
- Remove unused MAX_IDE_BUS definition (Zoltan Balaton)
- Fix branch displacement for BEQZC/BNEZC (David Daney)
- Don't set link_up for Boston's xilinx-pcie (Jiaxun Yang)
- Use bootloader API to set BAR registers in Malta (Jiaxun Yang)
-----BEGIN PGP SIGNATURE-----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=EqI/
-----END PGP SIGNATURE-----
Merge tag 'mips-20221030' of https://github.com/philmd/qemu into staging
MIPS patches queue
- Convert nanoMIPS disassembler from C++ to C (Milica Lazarevic)
- Consolidate VT82xx/PIIX south bridges (Bernhard Beschow)
- Remove unused MAX_IDE_BUS definition (Zoltan Balaton)
- Fix branch displacement for BEQZC/BNEZC (David Daney)
- Don't set link_up for Boston's xilinx-pcie (Jiaxun Yang)
- Use bootloader API to set BAR registers in Malta (Jiaxun Yang)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmNfpO8ACgkQ4+MsLN6t
# wN76og/+LMuTYYRkhETZyw3v5sTAexU0kmXyf/xMZ8PLi37Al2ia3qxo70qTh34m
# P2bbpCC46xzLCVY4s/84pb1lgpANNJNMIHwUni9HL4cTPPR7muKqpUOTEVh6Ghcq
# Zb2+e7yTKpIgvwDcIQEzU74gDyCcJoAo4LcLRVtuXer6olQsYsmlUqr3gg+Oy5kI
# zuJxOxZRoAP4H/ausGPg8oves28S3fVsw9J1x5p7vlzGt1Kx/i1XilSuGXI3H/79
# 0tgofUYkyFQRjxPLlE9OeYVwAo8gLFWwnkw/AOjHSOgGUsj/7yJXORm0ng/vQOqS
# j5036BHxmhYyEVL8aJAc7fvb4/m6walsXJItThqJ/JXphdAXi17fCCn0Wf9jqGrr
# io4Gm5qZI1bO/1orTaQywZTCjSi3pcuM0NxLZ/Qf7CVoXvNcddpDrSlyD3ILz9cq
# XqyaKQJ3kLvWTpJ6kZknl3s4kGnnMZw+2lZlusrSjrI4QnXmgoGLiSTRPxny1qQ0
# NaqAnys0Skn0fJ002na3lJgo4mzxzN+zEzMHsbB+RZv9JB2lIwQBm+zXDFHhb9Zv
# H0UFowi5lhJUjIZ5+bl4wtT2XoM4HM1YxU66a0t4SktMnKvBPCVBLUSj74Qdl1K8
# 7e2SvWB2ovNgscwek/srk1TT+yf7a6CmAraATSm0Fm/kxT5xa/Y=
# =EqI/
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 06:35:27 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20221030' of https://github.com/philmd/qemu: (55 commits)
hw/mips/malta: Use bootloader helper to set BAR registers
hw/mips: Use bl_gen_kernel_jump to generate bootloaders
hw/mips/bootloader: Allow bl_gen_jump_kernel to optionally set register
hw/mips/boston: Don't set link_up for xilinx-pcie
hw/isa/piix4: Move pci_ide_create_devs() call to board code
hw/isa/piix4: Add missing initialization
hw/isa/Kconfig: Fix dependencies of piix4 southbridge
hw/mips/malta: Reuse dev variable
hw/isa/piix3: Remove unused include
hw/ide/piix: Introduce TYPE_ macros for PIIX IDE controllers
hw/isa/piix4: Rename wrongly named method
hw/isa/piix3: Prefer pci_address_space() over get_system_memory()
hw/isa/piix3: Modernize reset handling
hw/isa/piix3: Add size constraints to rcr_ops
hw/isa/piix3: Remove extra ';' outside of functions
hw/i386/pc: Create DMA controllers in south bridges
disas/mips: Fix branch displacement for BEQZC and BNEZC
disas/nanomips: Rename nanomips.cpp to nanomips.c
disas/nanomips: Remove argument passing by ref
disas/nanomips: Replace Cpp enums for C enums
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Several machines have an unused MAX_IDE_BUS define. Remove it from
these machines that don't need it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220917115136.A32EF746E06@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to good QOM practice, an object should only deal with objects
of its own sub tree. Having devices create an alias on the machine
object doesn't respect this good practice. To resolve this, create the
alias in the machine's code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-14-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The AC97 function's wakeup status is wired to the PM function and both
the AC97 and MC97 interrupt routing is determined by the ISA function.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-11-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The PM controller has activity bits which monitor activity of other
built-in devices in the host device.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The USB functions can be enabled/disabled through the ISA function. Also
its interrupt routing can be influenced there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The IDE function is closely tied to the ISA function (e.g. the IDE
interrupt routing happens there), so it makes sense that the IDE
function is instantiated within the south bridge itself.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Establishes consistency with other (VIA) devices.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220901114127.53914-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This queue has the second part of the ppc4xx_sdram cleanups, doorbell
instructions for POWER8, new pflash handling for the e500 machine and a
Radix MMU regression fix.
It also has a lot of performance optimizations in the PowerPC emulation
done by the researchers of the Eldorado institute. Between using gvec
for VMX/VSX instructions, a full rework of the interrupt model and PMU
optimizations, they managed to drastically speed up the emulation of
powernv8/9/10 machines. Here's an example with avocado tests:
- with master:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (38.89 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (43.89 s)
- with this queue applied:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (21.23 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (22.58 s)
Other ppc machines, like pseries, also had a noticeable performance
boost.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY10J/gAKCRA82cqW3gMx
ZAbjAPwKNbE1wE2POJbMALBQAM5MewwLMV/UKGjE6jA7HAbb/AEA9e3o11FoUmSJ
rZkmTvMzBQZ81mMGRlS0cnqbrr4ADgc=
=gnKY
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221029' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-10-29:
This queue has the second part of the ppc4xx_sdram cleanups, doorbell
instructions for POWER8, new pflash handling for the e500 machine and a
Radix MMU regression fix.
It also has a lot of performance optimizations in the PowerPC emulation
done by the researchers of the Eldorado institute. Between using gvec
for VMX/VSX instructions, a full rework of the interrupt model and PMU
optimizations, they managed to drastically speed up the emulation of
powernv8/9/10 machines. Here's an example with avocado tests:
- with master:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (38.89 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (43.89 s)
- with this queue applied:
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8:
PASS (21.23 s)
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv9:
PASS (22.58 s)
Other ppc machines, like pseries, also had a noticeable performance
boost.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY10J/gAKCRA82cqW3gMx
# ZAbjAPwKNbE1wE2POJbMALBQAM5MewwLMV/UKGjE6jA7HAbb/AEA9e3o11FoUmSJ
# rZkmTvMzBQZ81mMGRlS0cnqbrr4ADgc=
# =gnKY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Oct 2022 07:09:50 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221029' of https://gitlab.com/danielhb/qemu: (63 commits)
target/ppc: Fix regression in Radix MMU
hw/ppc/e500: Implement pflash handling
hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*
hw/sd/sdhci-internal: Unexport ESDHC defines
hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two
docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s)
target/ppc: Increment PMC5 with inline insns
target/ppc: Add new PMC HFLAGS
ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks()
ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling
ppc4xx_sdram: Generalise bank setup
ppc4xx_sdram: Rename local state variable for brevity
ppc4xx_sdram: Use hwaddr for memory bank size
ppc4xx_sdram: Move ppc4xx_sdram_banks() to ppc4xx_sdram.c
ppc4xx_devs.c: Move DDR SDRAM controller model to ppc4xx_sdram.c
ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c
target/ppc: move the p*_interrupt_powersave methods to excp_helper.c
target/ppc: unify cpu->has_work based on cs->interrupt_request
target/ppc: introduce ppc_maybe_interrupt
target/ppc: remove ppc_store_lpcr from CONFIG_USER_ONLY builds
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allows e500 boards to have their root file system reside on flash using
only builtin devices located in the eLBC memory region.
Note that the flash memory area is only created when a -pflash argument is
given, and that the size is determined by the given file. The idea is to
put users into control.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221018210146.193159-6-shentey@gmail.com>
[danielhb: use memory_region_size() in mmio_size]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Do not exit from ppc4xx_sdram_banks() but report error via an errp
parameter instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <04bb3445439c2f37b99e74b3fdf4e62c2e6f7e04.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the generic bank handling introduced in previous patch in the DDR
SDRAM controller too. This also fixes previously broken region unmap
due to sdram_ddr_unmap_bcr() ignoring container region so it crashed
with an assert when the guest tried to disable the controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <fc7c50e365d0027a659111e9cd67f9b93113a163.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently only base and size are set on initial bank creation and bcr
value is computed on mapping the region. Set bcr at init so the bcr
encoding method becomes local to the controller model and mapping and
unmapping can operate on the bank so it can be shared between
different controller models. This patch converts the DDR2 controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <51b957b4b2d714a1072aa2589b979e08411640df.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the sdram local state variable to s in dcr read/write functions
and reset methods for better readability and to match realize methods.
Other places not converted will be changed or removed in subsequent
patches.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8e7539cb1fccd7556b68351c4dcf62534c3a69cf.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This resolves the target_ulong dependency that's clearly wrong and was
also noted in a fixme comment.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <92fdc5f9cc76bf45831428b3ec8d9fc6241b7190.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is only used by the ppc4xx memory controller models so
it can be made static.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <b1504a82157a586aa284e8ee3b427b9a07b24169.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In order to move PPC4xx SDRAM controller models together move out the
DDR2 controller model from ppc440_uc.c into a new ppc4xx_sdram.c file.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <2f2900f93e997480e54b7bf9c32bb482a0fb1022.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This new method will check if any pending interrupt was unmasked and
then call cpu_interrupt/cpu_reset_interrupt accordingly. Code that
raises/lowers or masks/unmasks interrupts should call this method to
keep CPU_INTERRUPT_HARD coherent with env->pending_interrupts.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221021142156.4134411-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This enum defines the bit positions in env->pending_interrupts for each
interrupt. However, except for the comparison in kvmppc_set_interrupt,
the values are always used as (1 << PPC_INTERRUPT_*). Define them
directly like that to save some clutter. No functional change intended.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221011204829.1641124-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pSeries machine never bothered with the common machine->fdt
attribute. We do all the FDT related work using spapr->fdt_blob.
We're going to introduce a QMP/HMP command to dump the FDT, which will
rely on setting machine->fdt properly to work across all machine
archs/types.
Let's set machine->fdt in two places where we manipulate the FDT:
spapr_machine_reset() and CAS. There are other places where the FDT is
manipulated in the pSeries machines, most notably the hotplug/unplug
path. For now we'll acknowledge that we won't have the most accurate
representation of the FDT, depending on the current machine state, when
using this QMP/HMP fdt command. Making the internal FDT representation
always match the actual FDT representation that the guest is using is a
problem for another day.
spapr->fdt_blob is left untouched for now. To replace it with
machine->fdt, since we're migrating spapr->fdt_blob, we would need to
migrate machine->fdt as well. This is something that we would like to to
do keep our code simpler but it's also a work we'll leave for later.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-14-danielhb413@gmail.com>
This will enable support for the 'dumpdtb' QMP/HMP command for
all powernv machines.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-13-danielhb413@gmail.com>
We'll introduce a QMP/HMP command that requires machine->fdt to be set
properly.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: qemu-ppc@nongnu.org
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-12-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the
virtex_ml507 machine.
Setting machine->fdt requires a MachineState pointer to be used inside
xilinx_load_device_tree(). Let's change the function to receive this
pointer from the caller. kernel_cmdline' can be retrieved directly from
the 'machine' pointer. 'ramsize' wasn't being used so can be removed.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-11-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sam460ex
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
sam460ex_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-10-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the bamboo
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
bamboo_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-9-danielhb413@gmail.com>
In spapr_phb_children_reset() we call device_legacy_reset() to reset any
QOM children of the SPAPR PCI host bridge device. This will not reset
any qbus such a child might own. Switch to device_cold_reset(), which will
reset both the device and its buses. (If the child has no qbuses then
there will be no change in behaviour.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221014142841.2092784-1-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that the MPC8544DS board also has a platform bus, the if statement
is always true.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-8-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Models the real device more closely.
Address and size values are taken from mpc8544.dts from the linux-5.17.7
tree. The IRQ range is taken from e500plat.c.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-7-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-6-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PlatformBusDevice has an mmio attribute which gets aliased to
SysBusDevice::mmio[0]. So PlatformbusDevice::mmio can be used directly,
avoiding the sysbus API.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Having a dedicated config switch makes dependency handling cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-3-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Gives users more fine-grained control over what should be compiled into
QEMU.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are used by both the SDRAM controller model and system DCRs. In
preparation to move SDRAM controller in its own file move these macros
to the ppc4xx.h header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <74d9bf4891e2ccceb52bb6ca6b54fd3f37a9fb04.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc440_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr2. This is mostly
modelling the DDR2 SDRAM controller found in the 460EX (used on the
sam460ex board). Newer SoCs (regardless of their PPC core, e.g. 405EX)
may have this controller but we only emulate enough of it for the
sam460ex u-boot firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3e82ae575c7c41e464a0082d55ecb4ebcc4d4329.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the check for valid memory sizes from board to sdram controller
init. This adds the missing valid memory sizes of 16 and 8 MiB to the
DoC and the board now only checks for additional restrictions imposed
by its firmware then sdram init checks for valid sizes for SoC.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <41da3797392acaacc7963b79512c8af8005fa4b0.1664021647.git.balaton@eik.bme.hu>
[danielhb: avoid 4*GiB size due to 32 bit build problems]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename functions to avoid name clashes when moving the DDR2 controller
model currently called ppc440_sdram to ppc4xx_devs. This also more
clearly shows which function belongs to which model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <9c09d10fbf36940ebbe30d7038d69cf3f2e58371.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename local sdram variable in ppc440_sdram_init to s for readability.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <7351b80fa321c32a6229e685dfdc940232f8b788.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To allow removing the do_init hack we need to improve the DDR2 SDRAM
controller model to handle the enable/disable bit that it ignored so
far.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <f8900aadb1a4426a6444741e6876c898b3b77f7b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Constants that are written zero padded for no good reason are hard to
read, it's easier to see what is meant if it's just 0 or 1 instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <93974622c3d398c7d3a3488b678b74c3807849de.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc4xx_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly
modelling the DDR SDRAM controller found in the 440EP (used on the
bamboo board) but also backward compatible with the older DDR
controllers on some 405 SoCs so we also use it for those now. This
likely does not cause problems for guests we run as the new features
are just not accessed but to model 405 SoC accurately some features
may have to be disabled or the model split between 440 and older.
Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an
updated DDR2 SDRAM controller implemented by the ppc440_sdram model
(only partially, enough for the 460EX on the sam460ex) that is not yet
QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2
when QOM'ified later.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of checking if memory size is valid in board code move this
check to ppc4xx_sdram_init() as this is a restriction imposed by the
SDRAM controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <39e5129dd095b285676a6267c5753786da1bc30d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change ppc4xx_sdram_banks() to take one Ppc4xxSdramBank array instead
of the separate arrays and adjust ppc4xx_sdram_init() and
ppc440_sdram_init() accordingly as well as machines using these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <e3a1fea51f29779fd6a61be90a29c684f3299544.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The do_init parameter of ppc4xx_sdram_init() is used to map memory
regions that is normally done by the firmware by programming the SDRAM
controller. Do this from board code emulating what firmware would do
when booting a kernel directly from -kernel without a firmware so we
can get rid of this do_init hack.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of storing sdram bank parameters in unrelated arrays put them
in a struct so it's clear they belong to the same bank and simplify
the state struct using this bank type.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5eb82d0424c584b2b9e6f7bc51560f8189ed21bb.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In ppc4xx_sdram_init() the struct is allocated with g_new0() so no
need to clear its elements. In the bamboo machine init memset can be
replaced with array initialiser which is shorter.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <529adc7705fb3e3e777439895bdaa136bacb9403.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
=qT+H
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-09-20:
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
hw/ppc/spapr: Fix code style problems reported by checkpatch
hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
target/ppc: Clear fpstatus flags on helpers missing it
target/ppc: Zero second doubleword of VSR registers for FPR insns
target/ppc: Set OV32 when OV is set
target/ppc: Zero second doubleword for VSX madd instructions
target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
target/ppc: Zero second doubleword in DFP instructions
target/ppc: Remove unused xer_* macros
target/ppc: Remove extra space from s128 field in ppc_vsr_t
target/ppc: Merge fsqrt and fsqrts helpers
target/ppc: Move fsqrts to decodetree
target/ppc: Move fsqrt to decodetree
target/ppc: Implement hashstp and hashchkp
target/ppc: Implement hashst and hashchk
target/ppc: Add HASHKEYR and HASHPKEYR SPRs
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.
Fixes: c5f54f3e31 ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132f ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Overwriting "path" in the second call to g_strdup_printf() causes a memory leak,
even if the variable itself is g_autofree.
Reported by Coverity as CID 1460454.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
=0uL/
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-08-31:
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
# ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
# YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
# =0uL/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Aug 2022 16:09:58 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu: (60 commits)
ppc4xx: Fix code style problems reported by checkpatch
ppc/ppc4xx: Fix sdram trace events
hw/ppc/Kconfig: Move imply before select
hw/ppc/sam460ex: Remove PPC405 dependency from sam460ex
ppc405: Move machine specific code to ppc405_boards.c
ppc/ppc405: QOM'ify FPGA
ppc/ppc405: Use an explicit I2C object
hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
ppc/ppc405: Use an embedded PPCUIC model in SoC state
ppc4xx: Rename ppc405-ebc to ppc4xx-ebc
ppc4xx: Move EBC model to ppc4xx_devs.c
ppc4xx: Rename ppc405-plb to ppc4xx-plb
ppc4xx: Move PLB model to ppc4xx_devs.c
ppc/ppc405: QOM'ify MAL
ppc/ppc405: QOM'ify PLB
ppc/ppc405: QOM'ify POB
ppc/ppc405: QOM'ify OPBA
ppc/ppc405: QOM'ify EBC
ppc/ppc405: QOM'ify DMA
ppc/ppc405: QOM'ify GPIO
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In pegasos2 section move imply before select to match other sections.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <4d46dde64c2e5df6db3f92426fb3ae885939c2b0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that shared PPC4xx devices are separated from PPC405 ones we can
drop this depencency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <cf6c1d280f830beeea41128595c8c026d5126d2b.1660762465.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are only used by the board code so move out from the shared SoC
model and put it in the boards file.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <2b23bcaaf191f96b217cbd06a6038694024862c3.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Having an explicit I2C model object will help if one day we want to
add I2C devices on the bus from the machine init routine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Symplify sysbus device casts for readibility]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <68eb8b5ac408ca8cc981ebf53a3e154c0d34c7f6.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make ppc-uic a subclass of ppc4xx-dcr-device which will handle the cpu
link and make it uniform with the other PPC4xx devices.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <eb548130cf60aea8a6ea4dba4dee1686b3cabc3d.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <63d9b14c8ff5f73e35bffca1036394b5235735ee.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The EBC is shared between 405 and 440 so move it to shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <10eae70509ca4bd74858fc2c0a0f0e4eb9330199.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b13ebfd12a71a28035bed5a915cbeee81cf21d1.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PLB is shared between 405 and 440 so move it to the shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2498384bf3e18959ee8cb984d72fb66b8a6ecadc.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Memory Access Layer (MAL) controller is currently modeled as a DCR
device with 4 IRQs. Also drop the ppc4xx_mal_init() helper and adapt
the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <d54a243dff94d95ba30dbcc09c27700a90ade932.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PLB is currently modeled as a simple DCR device. Also drop the
ppc4xx_plb_init() helper and adapt the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c4256d1bffca86fe1d696aa9c56732e5f563e114.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POB is currently modeled as a simple DCR device.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2bb1a89182523059ecb0e8d20c22a293534dec17.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The OPB arbitrer is currently modeled as a simple SysBus device with a
unique memory region.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <38476bc43d2332db2f09dbede9eff5234d6ce217.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
EBC is currently modeled as a DCR device. Also drop the ppc405_ebc_init()
helper and adapt the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <51a0769ab605c5158f4f2f1c896725d5fe7a073b.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The DMA controller is currently modeled as a DCR device with a couple
of IRQs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <4738b3c7cf18c328f05aaaddc555a46219431335.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The GPIO controller is currently modeled as a simple SysBus device
with a unique memory region.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Simplify sysbus device casts for readability]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e95d7849f3768e1f9a2846c4b282392750678b3e.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The OCM controller is currently modeled as a simple DCR device with
a couple of memory regions.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <ecb93d2d5993bb7a970365744c7d342d4abcb017.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The GPT controller is currently modeled as a SysBus device with a
unique memory region, a couple of IRQs and a timer.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8950ab26e78173f94ba65bc61bcfd0631de1fe61.1660746880.git.balaton@eik.bme.hu>
[danielhb: check if timer != NULL in ppc405_gpt_finalize()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The CPC controller is currently modeled as a DCR device.
Now that all clock settings are handled at the CPC level, change the
SoC "sys-clk" property to be an alias on the same property in the CPC
model.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <23393cb91a2c6c560a4461b3e9d1baa48ae28f74.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Device Control Registers (DCR) of on-SoC devices are accessed by
software through the use of the mtdcr and mfdcr instructions. These
are converted in transactions on a side band bus, the DCR bus, which
connects the on-SoC devices to the CPU.
Ideally, we should model these accesses with a DCR namespace and DCR
memory regions but today the DCR handlers are installed in a DCR table
under the CPU. Instead, introduce a little device model wrapper to hold
a CPU link and handle registration of DCR handlers.
The DCR device inherits from SysBus because most of these devices also
have MMIO regions and/or IRQs. Being a SysBusDevice makes things easier
to install the device model in the overall SoC.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Explicit opaque parameter for dcr callbacks]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9b21bdf55e0a728f093bad299e030d98f302ded0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Drop the use of ppc4xx_init() and duplicate a bit of code related to
clocks in the SoC realize routine. We will clean that up in the
following patches.
ppc_dcr_init() simply allocates default DCR handlers for the CPU. Maybe
this could be done in model initializer of the CPU families needing it.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-8-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This moves all the code previously done in the ppc405ep_init() routine
under ppc405_soc_realize(). We can also adjust the number of banks now
that we have control on ppc4xx_sdram_init().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-7-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is an initial model to start QOMification of the PPC405 board.
QOM'ified devices will be reintroduced one by one. Start with the
memory regions, which name prefix is changed to "ppc405".
Also, initialize only one RAM bank. The second bank is a dummy one
(zero size) which is here to match the hard coded number of banks in
ppc405ep_init().
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-6-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It doesn't belong to the generic machine nor the SoC. Fix a typo in
the name while we are at it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-5-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We will use this machine as a base to define the ref405ep and possibly
the PPC405 hotfoot board as found in the Linux kernel.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220809153904.485018-3-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It has been deprecated since 7.0.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220809153904.485018-2-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Given that powernv9 and powernv10 uses the same pnv-phb backend, the
logic to allow user created pnv-phbs for powernv10 is already in place.
Let's flip the switch.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-11-danielhb413@gmail.com>
