There is no $SOCKDIR, only $SOCK_DIR.
Fixes: f3923a72f1
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Doing this allows running this test with e.g. -o compat=0.10 or
-o compat=refcount_bits=1.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 051 should be skipped if nbd is not available, and 267 should
be skipped if copy-on-read is not enabled.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were only doing this if docker was enabled which isn't quite right.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211170520.7747-17-alex.bennee@linaro.org>
We are using tap-driver.pl, do not require anymore gtester to be installed
to run the testsuite in docker-based tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1576632611-55032-1-git-send-email-pbonzini@redhat.com>
One test ensures that the logfile handle is still valid even if
the logfile is changed during logging.
The other test validates that the logfile handle remains valid under
the logfile lock even if the logfile is closed.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-7-robert.foley@linaro.org>
test-util-filemonitor fails in restricted non-x86 Travis containers
since they apparently blacklisted some required system calls there.
Let's simply skip the test if we detect such an environment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191204154618.23560-6-thuth@redhat.com>
In certain environments like restricted containers, we can not create
huge test images. To be able to use "make check" in such container
environments, too, let's skip the hd-geo-test instead of failing when
the test images could not be created.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191204154618.23560-5-thuth@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-4-thuth@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
There are currently two bugs in s390x_code[]: First, the initial jump
uses the wrong offset, so it was jumping to 0x10014 instead of 0x10010.
Second, LHI only loads the lower 32-bit of the register.
Everything worked fine as long as the s390-ccw bios code was jumping
here with r3 containing zeroes in the uppermost 48 bit - which just
happened to be the case so far by accident. But we can not rely on this
fact, and indeed one of the recent suggested patches to jump2ipl.c cause
the newer GCCs to put different values into r3. In that case the code
from s390x_code[] crashes very ungracefully.
Thus let's make sure to jump to the right instruction, and use LGHI
instead of LHI to make sure that we always zero out the upper bits
of the register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191217150642.27946-1-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
test_keyval_visit_size() should test for trailing crap after size with
and without suffix. It does test the latter: "sz2=16Gi" has size
"16G" followed by crap "i". It fails to test the former "sz1=16E" is
a syntactically valid size that overflows uint64_t. Replace by
"sz1=0Z".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191125133846.27790-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Automatically complete jobs that have a 'ready' state and need an
explicit job-complete. Without this, run_job() would hang for such
jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
run_job() accepts a wait parameter for a timeout, but it doesn't
actually use it. The only thing that is missing is passing it to
events_wait(), so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a function that runs qemu-io and logs the output with the
appropriate filters applied.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The error message for a negative speed uses QERR_INVALID_PARAMETER,
which implies that the 'speed' option doesn't even exist:
{"error": {"class": "GenericError", "desc": "Invalid parameter 'speed'"}}
Make it use QERR_INVALID_PARAMETER_VALUE instead:
{"error": {"class": "GenericError", "desc": "Parameter 'speed' expects a non-negative value"}}
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If both the create options (qemu-img create -o ...) and the size
parameter were given, the size parameter was silently ignored. Instead,
make specifying two sizes an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Only apply --image-opts to the topmost image when listing an entire
backing chain. It is incorrect to treat backing filenames as image
options. Assuming we have the backing chain t.IMGFMT.base <-
t.IMGFMT.mid <- t.IMGFMT, qemu-img info fails as follows:
$ qemu-img info --backing-chain --image-opts \
driver=qcow2,file.driver=file,file.filename=t.IMGFMT
qemu-img: Could not open 'TEST_DIR/t.IMGFMT.mid': Cannot find device=TEST_DIR/t.IMGFMT.mid nor node_name=TEST_DIR/t.IMGFMT.mid
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191204093625.14836-19-armbru@redhat.com>
Local Error * variables are conventionally named @err or @local_err,
and Error ** parameters @errp. Naming local variables like parameters
is confusing. Clean that up.
Naming parameters like local variables is also confusing. Left for
another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204093625.14836-17-armbru@redhat.com>
Declaring a local Error *err without initializer looks suspicious.
Fuse the declaration with the initialization to avoid that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
These machines can't be used reliably for migration anymore, quoting
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg04516.html :
"
due to the introduction of the memory API, the firmware is not
migrated correctly from source to destination. On QEMU <1.3 the
0xf0000-0xfffff area is basically a copy of the higher
0xffff0000-0xffffffff area, while on more recent versions it is
initialized with zeroes and the firmware copies from 0xffff0000 to
0xf0000. When you migrate from old to new QEMU, after reboot there's
nothing at 0xf0000 and bugs ensue.
"
The pc-0.x machines have been marked as deprecated since QEMU v4.0, so
it is time to remove them now.
And while we're at it, mark the remaining pc-1.x machine types
as deprecated now, too, so that we finally only have "pc-i440fx"
and "pc-q35" machine types left (apart from the non-versioned
"isapc" and "microvm") once we remove them in a couple of releases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The block tests, as well as ahci-test needs qemu-img. Do not run
them if it wasn't built.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has two bools and two strings, it is very difficult to remember
which does what. And it makes very difficult to add new parameters as
we need to modify all the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
This explains better what they do and avoid confussino with
command_src/target.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
We are repeating almost everything for each machine while creating the
command line for migration. And once for source and another for
destination. We start putting there opts_src and opts_dst.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
-----BEGIN PGP SIGNATURE-----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=4LJa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue 2019-12-17
# gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
python/qemu: Remove unneeded imports in __init__
python/qemu: accel: Add tcg_available() method
python/qemu: accel: Strengthen kvm_available() checks
python/qemu: accel: Add list_accel() method
python/qemu: Move kvm_available() to its own module
Acceptance tests: use relative location for tests
Acceptance tests: use avocado tags for machine type
Acceptance tests: introduce utility method for tags unique vals
Acceptance test x86_cpu_model_versions: use default vm
tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine
python/qemu: Add set_qmp_monitor() to QEMUMachine
analyze-migration.py: replace numpy with python 3.2
analyze-migration.py: fix find() type error
Revert "Acceptance test: cancel test if m68k kernel packages goes missing"
tests/boot_linux_console: Fetch assets from Debian snapshot archives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_test_rand_int provides a reproducible random integer number, using a
different number seed every time but allowing reproduction using the
--seed command line option. It is thus better suited to tests than
g_random_int or random.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check-report.html and check-report.xml targets were replaced
with check-report.tap in commit 9df43317b8 but the check-help
text was not updated so it still lists check-report.html.
Fixes: 9df43317b8
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191211204427.4681-2-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On ppc64, migration-test only works with kvm_hv, and we already
have a check to verify the module is loaded.
kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists,
but on some systems (like build systems) /dev/kvm can be missing
(by administrators choice).
And as kvm_hv exists test-migration is started but QEMU falls back to
TCG because it cannot be used:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
Back to tcg accelerator
And as the test is done with TCG, it fails.
As for s390x, we must check for the existence and the access rights
of /dev/kvm.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120170955.242900-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
./configure --enable-sdl --audio-drv-list=sdl --enable-modules
Will generate two identical test names: /$arch/module/load/sdl
Which generates an error like:
(tests/modules-test:23814): GLib-ERROR **: 18:23:06.359: duplicate test case path: /aarch64//module/load/sdl
Add the subsystem prefix in the name as well, so instead we get:
/$arch/module/load/audio-sdl
/$arch/module/load/ui-sdl
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <d64c9aa098cc6e5c0b638438c4959eddfa7e24e2.1573679311.git.crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the bluetooth code has been removed, we don't need to test
with this library anymore.
Message-Id: <20191120091014.16883-5-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
An Avocado Test ID[1] is composed by a number of components, but it
starts with the Test Name, usually a file system location that was
given to the loader.
Because the source directory is being given as a prefix to the
"tests/acceptance" directory containing the acceptance tests, the test
names will needlessly include the directory the user is using to host
the QEMU sources (and/or build tree).
Let's remove the source dir (or a build dir) from the path given to
the test loader. This should give more constant names, and when using
result servers and databases, it should give the same test names
across executions from different people or from different directories.
[1] - https://avocado-framework.readthedocs.io/en/69.0/ReferenceGuide.html#test-id
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-5-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently a test can describe the target architecture binary that it
should primarily be run with, be setting a single tag value.
The same approach is expected to be done with other QEMU aspects to be
tested, for instance, the machine type and accelerator, so let's
generalize the logic into a utility method.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-3-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The default vm provided by the test, available as self.vm, serves the
same purpose of the one obtained by self.get_vm(), but saves a line
and matches the style of other tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
On linux_initrd and empty_cpu_model tests the same effect of
calling QEMU through run() to inspect the terminated process is
achieved with a sequence of set_qmp_monitor() / launch() / wait()
commands on an QEMUMachine object. This patch changes those
tests to use QEMUMachine instead, so they follow the same pattern
to launch QEMU found on other acceptance tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191211185536.16962-3-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Now than we use the stable snapshot archive, we can remove this check.
This reverts commit d2499aca4b.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-3-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The kernel packaged was fetched from an unstable repository.
Use the stable snapshot archive instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-2-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
hw/mips/mips_malta.c
hw/mips/gt64xxx_pci.c
tests/acceptance/linux_ssh_mips_malta.py
All these mips malta machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-3-git-send-email-Filip.Bozuta@rt-rk.com>
After the introduction of generic PCIe root port and PCIe-PCI bridge,
we will also have SHPC controller on ARM, so just enable SHPC native
hot plug.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last argument of AML bit and/or statement is the target variable,
so we don't need to use a NULL target and then an additional store
operation; using just aml_and() or aml_or() statement is enough.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libcap was dropped from virtio-9p (commit 7e46261368), so remove it from
the dockerfiles as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
[groug, mention SHA1 that dropped libcap]
Signed-off-by: Greg Kurz <groug@kaod.org>
Add optional pre-shutdown: shutdown/launch vm before migration. This
leads to storing persistent bitmap to the storage, which breaks
migration with dirty-bitmaps capability enabled and shared storage
until fixed by previous commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191125125229.13531-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current image is broken while running qtests but the bug go away
when built with a newer Ubuntu i386 image. I was unable to replicate
the crash on Debian Buster for i386 either so I'm concluding it is a
distro problem. Let's paper over that crack by updating our 32 bir
test image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The iotests in particular don't like the output being spammed with
warnings about locales.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To be able to run the docker tests centos has here we have to install
python3 as well as the basic tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 29cb418749 ("spapr: Set VSMT to smp_threads by default")
has introduced a new default value for VSMT that is not supported
by old kernels (before 4.13 kernel) and this breaks "make check"
on these kernels.
To fix that, explicitly set in the involved tests the value that was
used as the default value before the change.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120142539.236279-1-lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl3VG9cACgkQ+9DbCVqe
KkQvaAgAgfum+j9VZrgAakBKzmBuWV5IH5vJ+w9rzCP9/Y8XtQ7wd1le4jY0XtEb
6azCR0Fk4QivuXaH+YA3M6iV3Om5m5Tl6dIYsDt0Qk6jCkZE/Kfi/7jEQaPnVH0V
FQzSvXOtbMipBNBYp/WzMqNAdbIB3hI/oBXcxFqNiKrTsLylywSKCJCbHrJDNtCh
q0hHvqPVrCTXCSav16NqbxqibRn+gSkYFeAAE2LjaX9yVpa2bGMmjvQEJCeEBMxQ
76KzcLyKHhvl9NJWjd7UYaVLyXgGnOLtp3KjFaSM4+BU8CS/nY6h7Oiymyf8vShV
Bmx/Ju/m0J/H8RHfRdZcE0YGYuEmKA==
=EMcr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1' into staging
A few test and doc fixes:
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
# gpg: Signature made Wed 20 Nov 2019 10:56:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1:
tests/tcg: modify multiarch tests to work with clang
.travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETS
docs/devel: update tcg-plugins.rst with API versioning details
docs/devel: rename plugins.rst to tcg-plugins.rst
tests/vm: make --interactive (and therefore DEBUG=1) unconditional
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the concept of only dropping to ssh if a test fails is nice it
is more useful for this to be unconditional. You usually just want to
get the build up and running and then noodle around debugging or
attempting to replicate.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
If IASL wasn't able to parse expected file, test will just
print warning
"Warning! iasl couldn't parse the expected aml\n"
and remove temporary table dumped from guest.
Typically expected tables are always valid, with an exception
when patchset introduces new tables.
Make sure dumped tables are retained even if expected files
are not valid, so one could have a chance to manualy check new
tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1574240560-12538-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's an old compatibility shim that just delegates to scsi-cd or scsi-hd.
Just like ide-drive, we don't need this.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run the core of the test twice, once without iothreads, and again
with, for more coverage of both setups.
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191114213415.23499-5-eblake@redhat.com>
We generally include relevant HMP input in .out files, by virtue of
the fact that HMP echoes its input. But QMP does not, so we have to
explicitly inject it in the output stream (appropriately filtered to
keep the tests passing), in order to make it easier to read .out files
to see what behavior is being tested (especially true where the output
file is a sequence of {'return': {}}).
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-4-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Up to now, all it took to cause a lot of iotest failures was to have a
background process such as 'nbdkit -p 10810 null' running, because we
hard-coded the TCP port. Switching to a Unix socket eliminates this
contention. We still have TCP coverage in test 233, and that test is
more careful to not pick a hard-coded port.
Add a comment explaining where the format layer applies when using
NBD as protocol (until NBD gains support for a resize extension, we
only pipe raw bytes over the wire).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-3-eblake@redhat.com>
[eblake: Tweak socket name per Max Reitz' review]
This test has been broken since 3.0. It used TEST_IMG to influence
the name of a file created during _make_test_img, but commit 655ae6bb
changed things so that the wrong file name is being created, which
then caused _launch_qemu to fail. In the meantime, the set of events
issued for the actions of the test has increased.
Why haven't we noticed the failure? Because the test rarely gets run:
'./check -qcow2 173' is insufficient (that defaults to using file protocol)
'./check -nfs 173' is insufficient (that defaults to using raw format)
so the test is only run with:
./check -qcow2 -nfs 173
Note that we already have a number of other problems with -nfs:
./check -nfs (fails 18/30)
./check -qcow2 -nfs (fails 45/76 after this patch, if exports does
not permit 'insecure')
and it's not on my priority list to fix those. Rather, I found this
because of my next patch's work on tests using _send_qemu_cmd.
Fixes: 655ae6b
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191114213415.23499-2-eblake@redhat.com>
The test for an NBD client. The NBD server is disconnected after the
client write request. The NBD client should reconnect and complete
the write operation.
Suggested-by: Denis V. Lunev <den@openvz.org>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <1573529976-815699-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Test that doing a second blockdev-snapshot doesn't make the first
overlay's backing file go away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The variable for error messages to be displayed is $results, not
$reason. Fix 'check' to print the "no qualified output" error message
again instead of having a failure without any message telling the user
why it failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
From the two values compared, make it obvious which is found at path, and
which is expected.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a very simple versioning API which allows the plugin
infrastructure to check the API a plugin was built against. We also
expose a min/cur API version to the plugin via the info block in case
it wants to avoid using old deprecated APIs in the future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
The NetBSD project uses SHA512 for its checksums so lets support that
in the download helper.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This test has been unstable on NetBSD for awhile. It seems the
mechanism used to listen to a random port is a Linux-ism (although a
received wisdom Linux-ism rather than a well documented one). As
working around would add more hard to test complexity to the test I've
gone for the easier option of making it CONFIG_LINUX only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Kamil Rytarowski <kamil@netbsd.org>
Use new helper to read all pending console output,
not just a single char. Unblocks installer boot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-4-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Helper function to read all console output.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191031085306.28888-3-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ehabkost: rebased to latest qemu.git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191031085306.28888-2-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We're seeing occasional asserts in 'wait_for_migraiton_fail', that
I can't reliably reproduce, and where the cores don't have any useful
state. Print the 'status' out, so we can see which unexpected state
we're ending up in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191108104307.125020-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test what qemu-img check says about an image after one has written
compressed data to an offset above 4 GB.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191028161841.1198-3-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
but they are a step in the good direction.
Fix Netlink support.
Trivial fix for alpha
PULL v2: fix checkpatch warnings
-----BEGIN PGP SIGNATURE-----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=btyq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.2-pull-request' into staging
sparc/sparc64 fixes: this doesn't fix debian chroot for me
but they are a step in the good direction.
Fix Netlink support.
Trivial fix for alpha
PULL v2: fix checkpatch warnings
# gpg: Signature made Wed 06 Nov 2019 13:04:36 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-4.2-pull-request:
linux-user/alpha: Set r20 secondary return value
linux-user/sparc: Fix cpu_clone_regs_*
linux-user: Introduce cpu_clone_regs_parent
linux-user: Rename cpu_clone_regs to cpu_clone_regs_child
linux-user/sparc64: Fix target_signal_frame
linux-user/sparc: Fix WREG usage in setup_frame
linux-user/sparc: Use WREG_SP constant in sparc/signal.c
linux-user/sparc: Begin using WREG constants in sparc/signal.c
linux-user/sparc: Use WREG constants in sparc/target_cpu.h
target/sparc: Define an enumeration for accessing env->regwptr
tests/tcg/multiarch/linux-test: Fix error check for shmat
scripts/qemu-binfmt-conf: Update for sparc64
linux-user: Support for NETLINK socket options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's get the image fuzzer Python 3 changes merged in QEMU 4.2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl3BmJQACgkQnKSrs4Gr
c8i3JwgAkTUM4b9O1irKMTHaeO3kmKmU4g920fRTXXjJXhA6i7IYDz6iYEQoNJoR
RsyaFRKfBqdmzRmk5qmehBax1XIcI4IZVWeiyk2SqjuM3T8d/VOln/iHLyzIz48j
zLP2AoEPiiWu+DODqz1SqOwYaUdw7bdEky/Nh0WbCRZdhS31m8D/svCIxtzoLhXk
OcWcTdeqXMG+EFSYvk3LFHJajbTOV4SMK6p+jXmdwVmV3rT7sIB4cS3s8oXC3zpM
bM3/Br/mRLJjnbF2FgQLCWwdV8NpvX7jk1ryoiySi5itPQil0PurAHwauPksUveo
Kf3LlcuaSRwKT8eG5745hyC2qBzEAg==
=7PkU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
Let's get the image fuzzer Python 3 changes merged in QEMU 4.2.
# gpg: Signature made Tue 05 Nov 2019 15:43:16 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
image-fuzzer: Use OSerror.strerror instead of tuple subscript
image-fuzzer: Use errors parameter of subprocess.Popen()
image-fuzzer: Run using python3
image-fuzzer: Encode file name and file format to bytes
image-fuzzer: Use bytes constant for field values
image-fuzzer: Return bytes objects on string fuzzing functions
image-fuzzer: Use %r for all fiels at Field.__repr__()
image-fuzzer: Use io.StringIO
image-fuzzer: Explicitly use integer division operator
image-fuzzer: Write bytes instead of string to image file
image-fuzzer: Open image files in binary mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEicHnj2Ae6GyGdJXLoqP9bt6twN4FAl2/Us4ACgkQoqP9bt6t
wN7dLhAAxlnmK9M7DeraiyCCVwgIzYL4sFssIAcIt5wbDg8p6od+hgeKcRwPKJbP
mg2a2Ehc1hoIJD3xUUVwJIkV12CONPnx+H3LEkJXY+w3ZqwbkNNJHy+5FBuC+h8P
1lTZDK6ulXkNR7OfeKys8Mzf6Ukf0TJsEuXHZWxC/e3I3rpf0+/FqP5QwHbi18Q2
4rCSy/59eaBiMBphlZHBncVOo1Kv1hKqpqSc9ddGj3uwyDpcjUThz4NEDhdXFE+r
0tKTPbv0f+z8CG9jAOgbmbFNFxwFb7D4uouwflFtNXleb5cdVGxQsAsJmYDvTmjP
3Qnvqiuw1BYRGpG1+54l0F82AThV1jlmlWVt/34PfwmGJRgMoTtDUJmW+SfjC3YT
MB+r78v4a6lavAxj780YIWVQzdvO4pG6fKKRbtMXNw4hyVxSWCBv1xC9ioKe1Xn1
LNI+rAY7ohYt/dN1aNipdFwk33NYHOOGDP2eU9GGL76tMrY5jK8i5KSqo1SNvxak
zpAJggMZXaG4BtGj7qCmMngQeC2yJwK1lou4P/S5A5OYDlHWjeszKBHa+hzQa/XH
3U8hEgRMjyeMzyyvh1OLDjWnxAMMeoPqb/hajmuZ1qM0oeBcKXbYtijNdAWIOK2q
AJeTeHWJ9WTkFvThwSSVDu6I6Snfhecvk96tKft0pr0rXYM6bsg=
=0aXg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-next-pull-request' into staging
Fix the fw_cfg reboot-timeout=-1 special value, add a test for it.
# gpg: Signature made Sun 03 Nov 2019 22:21:02 GMT
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/fw_cfg-next-pull-request:
tests/fw_cfg: Test 'reboot-timeout=-1' special value
fw_cfg: Allow reboot-timeout=-1 again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OSError can't be used like a tuple on Python 3, so change the
code to use `e.sterror` instead of `e[1]`.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191021214117.18091-1-ehabkost@redhat.com
Message-Id: <20191021214117.18091-1-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually encoding stderr and stdout output, use
`errors` parameter of subprocess.Popen(). This will make
process.communicate() return unicode strings instead of bytes
objects.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-11-ehabkost@redhat.com
Message-Id: <20191016192430.25098-11-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
image-fuzzer is now supposed to be ready to run using Python 3.
Remove the __future__ imports and change the interpreter line to
"#!/usr/bin/env python3".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191016192430.25098-10-ehabkost@redhat.com
Message-Id: <20191016192430.25098-10-ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
