As an alternative to commit 818f86b (exec: limit system memory
size, 2013-11-04) let's just make all address spaces 64-bit wide.
This eliminates problems with phys_page_find ignoring bits above
TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
consequently messing up the computations.
In Luiz's reported crash, at startup gdb attempts to read from address
0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets
is the newly introduced master abort region, which is as big as the PCI
address space (see pci_bus_init). Due to a typo that's only 2^63-1,
not 2^64. But we get it anyway because phys_page_find ignores the upper
bits of the physical address. In address_space_translate_internal then
diff = int128_sub(section->mr->size, int128_make64(addr));
*plen = int128_get64(int128_min(diff, int128_make64(*plen)));
diff becomes negative, and int128_get64 booms.
The size of the PCI address space region should be fixed anyway.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment, memory radix tree is already variable width, but it can
only skip the low bits of address.
This is efficient if we have huge memory regions but inefficient if we
are only using a tiny portion of the address space.
After we have built up the map, detect
configurations where a single L2 entry is valid.
We then speed up the lookup by skipping one or more levels.
In case any levels were skipped, we might end up in a valid section
instead of erroring out. We handle this by checking that
the address is in range of the resulting section.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend skip to 6 bit. As page entry doesn't fit in 16 bit
any longer anyway, extend it to 32 bit.
This doubles node map memory requirements, but follow-up
patches will save this memory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.
We want to make exec.c's radix trees 64-bit wide. As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols. Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...
This patch has no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSf4ZyAAoJECgfDbjSjVRp9DIIAK7yEMa9ie5n3sInKH+xHT3R
Sf4uErqx55WfT/54dnLJPrs7DTfXblW+Qjnq/7RuaoJ32Dfshgxz64mPF+Lm2s3+
ghjdQrKo2YkdSbbxy+AnBNO4eHMSeUs/rM2yIfi7FZU0nwC7wNe1QpAN3UjM4yAF
5vE18xZE0Rxz/prXgofLtPHa1czvGPFk1qbS7Vag6HCSkfEI4N1Jxf9otDRV6KZP
9hX0kTvZyOKdbhccN05G4VCWwx5YUrpBsNSoph4Jx1aokEBoucr4sgE1FPDp0H9H
bJqDaAM2G5HNrDtIiDov5WOzRNT/ly011Q4mcaQh3va0pqUXttKCHgE1KRgn76I=
=iMNW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, virtio bug fixes
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 10 Nov 2013 05:13:22 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Revert "exec: limit system memory size"
Revert "hw/pci: partially handle pci master abort"
loader: drop return value for rom_add_blob_fixed
acpi-build: disable with -no-acpi
virtio-net: only delete bh that existed
Fix pc migration from qemu <= 1.5
Message-id: 1384159176-31662-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts commit 818f86b883.
This was a work-around for bugs elsewhere in the system,
exposed by commit a53ae8e934:
"hw/pci: partially handle pci master abort"
since that's reverted now, the work-around is not required for 1.7
anymore.
The proper fix is supporting full 64 bit addresses in the radix tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
This fixes qemu abort with the following message:
include/qemu/int128.h:22: int128_get64: Assertion `!a.hi' failed.
which happens due to attempt to invalidate breakpoint by virtual address
for which get_phys_page_debug couldn't find mapping.
For more details see
http://lists.nongnu.org/archive/html/qemu-devel/2013-09/msg04582.html
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The page table logic in exec.c assumes
that memory addresses are at most TARGET_PHYS_ADDR_SPACE_BITS.
But pci addresses are full 64 bit so if we try to render them ignoring
the extra bits, we get strange effects with sections overlapping each
other.
To fix, simply limit the system memory size to
1 << TARGET_PHYS_ADDR_SPACE_BITS,
pci addresses will be rendered within that.
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes a regression introduced by commit e3127ae0c, which kept the
allocation size of the bounce buffer limited to one page in order to
avoid unbounded allocations (as explained in the commit message of
6d16c2f88), but broke the reporting of the shortened bounce buffer to
the caller. The caller therefore assumes that the full requested size
was provided and causes memory corruption when writing beyond the end of
the actually allocated buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is not needed since the RAM list is not modified anymore by
qemu_get_ram_ptr. Replace it with qemu_get_ram_block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
phys_mem_alloc and its assigned values qemu_anon_ram_alloc and
legacy_s390_alloc must have identical argument lists.
legacy_s390_alloc uses the size parameter to call mmap, so size_t is
good enough for all of them.
This patch fixes compiler errors on i686 Linux hosts:
CC alpha-softmmu/exec.o
exec.c:752:51: error:
initialization from incompatible pointer type [-Werror]
exec.c: In function 'qemu_ram_alloc_from_ptr':
exec.c:1139:32: error:
comparison of distinct pointer types lacks a cast [-Werror]
exec.c: In function 'qemu_ram_remap':
exec.c:1283:21: error:
comparison of distinct pointer types lacks a cast [-Werror]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1380481005-32399-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hQfy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
# gpg: Signature made Wed 09 Oct 2013 03:40:51 AM PDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (2) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpu: Drop cpu_model_str from CPU_COMMON
cpu: Move cpu_copy() into linux-user
cputlb: Remove dead function tlb_update_dirty()
cpu-exec: Also reload CPUClass *cc after longjmp return in cpu_exec()
target-i386: Set model=6 on qemu64 & qemu32 CPU models
It is only used there and is deemed very fragile if not incorrect in its
current memcpy() form. Moving it into linux-user will allow to move
parts into target_cpu.h headers and only copy what the ABI mandates.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Touched some error after enabling DEBUG_SUBPAGE.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
Commit 3435f39513 reduced the ifdeffery with
this result for MinGW:
exec.c: In function ‘qemu_ram_free’:
exec.c:1239:17: warning:
implicit declaration of function ‘munmap’ [-Wimplicit-function-declaration]
exec.c:1239:17: warning:
nested extern declaration of ‘munmap’ [-Wnested-externs]
exec.c:1239: undefined reference to `munmap'
Add some ifdeffery again to fix this.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
MADV_DONTFORK prevents fork to fail with -ENOMEM if the default
overcommit heuristics decides there's too much anonymous virtual
memory allocated. If the KVM secondary MMU is synchronized with MMU
notifiers or not, doesn't make a difference in that regard.
Secondly it's always more efficient to avoid copying the guest
physical address space in the fork child (so we avoid to mark all the
guest memory readonly in the parent and so we skip the establishment
and teardown of lots of pagetables in the child).
In the common case we can ignore the error if MADV_DONTFORK is not
available. Leave a second invocation that errors out in the KVM path
if MMU notifiers are missing and KVM is enabled, to abort in such
case.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
We abort() on memory allocation failure. abort() is appropriate for
programming errors. Maybe most memory allocation failures are
programming errors, maybe not. But guest memory allocation failure
isn't, and aborting when the user asks for more memory than we can
provide is not nice. exit(1) instead, and do it in just one place, so
the error message is consistent.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Another issue missed in commit fdec991 is -mem-path: it needs to be
rejected only for old S390 KVM, not for any S390. Not that I
personally care, but the ifdeffery in qemu_ram_alloc_from_ptr() annoys
me.
Note that this doesn't actually make -mem-path work, as the kernel
doesn't (yet?) support large pages in the host for KVM guests. Clean
it up anyway.
Thanks to Christian Borntraeger for pointing out the S390 kernel
limitations.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Old S390 KVM wants guest RAM mapped in a peculiar way. Commit 6b02494
implemented that.
When qemu_ram_remap() got added in commit cd19cfa, its code carefully
mimicked the allocation code: peculiar way if defined(TARGET_S390X) &&
defined(CONFIG_KVM), else normal way.
For new S390 KVM, we actually want the normal way. Commit fdec991
changed qemu_ram_alloc_from_ptr() accordingly, but forgot to update
qemu_ram_remap(). If qemu_ram_alloc_from_ptr() maps RAM the normal
way, but qemu_ram_remap() remaps it the peculiar way, remapping
changes protection and flags, which it shouldn't.
Fortunately, this can't happen, as we never remap on S390.
Replace the incorrect code with an assertion.
Thanks to Christian Borntraeger for help with assessing the bug's
(non-)impact.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Make it a generic hook rather than a KVM hook. Less code and
ifdeffery.
Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Instead of spreading its ifdeffery everywhere, confine it to
qemu_ram_alloc_from_ptr(). Everywhere else, simply test block->fd,
which is non-negative exactly when block uses -mem-path.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
With -mem-path, qemu_ram_alloc_from_ptr() first tries to allocate
accordingly, but when it fails, it falls back to normal allocation.
The fall back allocation code used to be effectively identical to the
"-mem-path not given" code, until it started to diverge in commit
432d268. I believe the code still works, but clean it up anyway: drop
the special fall back allocation code, and fall back to the ordinary
"-mem-path not given" code instead.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Issues:
* We try to obey -mem-path even though it can't work with Xen.
* To implement -machine mem-merge, we call
memory_try_enable_merging(new_block->host, size). But with Xen,
new_block->host remains null. Oops.
Fix by separating Xen allocation from normal allocation.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1375276272-15988-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Accesses to unassigned io ports shall return -1 on read and be ignored
on write. Ensure these properties via dedicated ops, decoupling us from
the memory core's handling of unassigned accesses.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If offset_within_address_space falls in a page, then we register a
subpage. So check offset_within_address_space rather than
offset_within_region.
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem is introduced by commit 2332616 (exec: Support 64-bit
operations in address_space_rw, 2013-07-08). Before that commit,
memory_access_size would only return 1/2/4.
Since alignment is already handled above, reduce l to the largest
power of two that is smaller than l.
Cc: qemu-stable@nongnu.org
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Tested-by: Oleksii Shevchuk <alxchk@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 1a1562f5ea prepared a VMSTATE_CPU()
macro for device-style VMStateDescription registration, but missed to
adapt cpu_exec_init(), so that the "cpu_common" VMStateDescription was
still registered for AlphaCPU (fe31e73742)
and OpenRISCCPU (da69721460). Fix this.
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.
It also simplifies the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a new thread gets created, we need to reset non arch specific state to
get the new CPU into clean state.
However this reset should happen before the arch specific CPU contents get
copied over. Otherwise we end up having clean reset state in our newly created
thread.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
access_size_min can be 1 because erroneous accesses must not crash
QEMU, they should trigger exceptions in the guest or just return
garbage (depending on the CPU). I am not sure I understand the
comment: placing a 4-byte field at the last byte of a region
makes no sense (unless impl.unaligned is true), and that is
why memory.c:access_with_adjusted_size does not bother with
minimums larger than the remaining length.
access_size_max can be mr->ops->valid.max_access_size because memory.c
can and will still break accesses bigger than
mr->ops->impl.max_access_size.
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e3127ae0 introduced a problem where we're passing a
hwaddr* to qemu_ram_ptr_length() but it wants a ram_addr_t*;
this will cause problems on 32 bit hosts and in any case
provokes a clang warning on MacOSX:
CC arm-softmmu/exec.o
exec.c:2164:46: warning: incompatible pointer types passing 'hwaddr *'
(aka 'unsigned long long *') to parameter of type 'ram_addr_t *'
(aka 'unsigned long *')
[-Wincompatible-pointer-types]
return qemu_ram_ptr_length(raddr + base, plen);
^~~~
exec.c:1392:63: note: passing argument to parameter 'size' here
static void *qemu_ram_ptr_length(ram_addr_t addr, ram_addr_t *size)
^
Since this function is only used in one place, change its
prototype to pass a hwaddr* rather than a ram_addr_t*,
rather than contorting the calling code to get the type right.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Honor the implementation maximum access size, and at least check
the minimum access size.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It seems to be unused since several years (commit
be995c2764 in 2006).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1373044036-14443-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cur_map is not used anymore; instead, each AddressSpaceDispatch
has its own nodes/sections pair. The priorities of the
MemoryListeners, and in the future RCU, guarantee that the
nodes/sections are not freed while they are still in use.
(In fact, next_map itself is not needed except to free the data on the
next update).
To avoid incorrect use, replace cur_map with a temporary copy that
is only valid while the topology is being updated. If you use it,
the name prev_map makes it clear that you're doing something weird.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, AddressSpaceDispatch holds a constistent tuple of
(phys_map, nodes, sections). This will be important when updates
of the topology will run concurrently with reads.
cur_map is not used anymore except for freeing it at the end of the
topology update.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This same treatment previously done to phys_node_map and phys_sections
is now applied to the dispatch field of AddressSpace. Topology updates
use as->next_dispatch while accesses use as->dispatch.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help having two copies of AddressSpaceDispatch during the
recreation of the radix tree (one being built, and one that is complete
and will be protected by RCU). We do not want to have to unregister and
re-register the listener.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, phys_node_map and phys_sections are shared by all
of the AddressSpaceDispatch. When updating mem topology, all
AddressSpaceDispatch will rebuild dispatch tables sequentially
on them. In order to prepare for RCU access, leave the old
memory map alive while the next one is being accessed.
When rebuilding, the new dispatch tables will build and lookup
next_map; after all dispatch tables are rebuilt, we can switch
to next_* and free the previous table.
Based on a patch from Liu Ping Fan.
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sections like phys_section_unassigned always have fixed address
in phys_sections. Declared as macro, so we can use them
when having more than one phys_sections array.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The iothread mutex might be released between map and unmap, so the
mapped region might disappear.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
First of all, rename "todo" to "done".
Second, clearly separate the case of done == 0 with the case of done != 0.
This will help handling reference counting in the next patch.
Third, this test:
if (memory_region_get_ram_addr(mr) + xlat != raddr + todo) {
does not guarantee that the memory region is the same across two iterations
of the while loop. For example, you could have two blocks:
A) size 640 K, mapped at physical address 0, ram_addr_t 0
B) size 64 K, mapped at physical address 0xa0000, ram_addr_t 0xa0000
then mapping 1 M starting at physical address zero will erroneously treat
B as the continuation of block A. qemu_ram_ptr_length ensures that no
invalid memory is accessed, but it is still a pointless complication of
the algorithm. The patch makes the logic clearer with an explicit test
that the memory region is the same.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch it would not be used elsewhere anyway. Also,
the _nofail and the standard versions of this function return different
things, which is confusing. Removing the function from the public headers
limits the confusion.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not bother visiting the radix tree when an address space is destroyed.
After the previous patch, this has become a pointless exercise. When
called from address_space_destroy_dispatch, all you're doing is zeroing
out a structure that will be freed as soon as you come back. When called
from mem_begin, when phys_page_set_level will call phys_map_node_alloc the
radix tree's array will be zeroed too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
phys_sections_clear is invoked after the dispatch tree has been
destroyed. This leaves a window where phys_sections_nb > 0 but the
subpages are not valid anymore, which is a recipe for use-after-free
bugs.
Move the destruction of subpages in phys_sections_clear. We will
still destroy the subpages when an address space is cleaned up,
because address_space_destroy will clear as->root and commit the
change before it calls address_space_destroy_dispatch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current ioport dispatcher is a complex beast, mostly due to the
need to deal with old portio interface users. But we can overcome it
without converting all portio users by embedding the required base
address of a MemoryRegionPortio access into that data structure. That
removes the need to have the additional MemoryRegionIORange structure
in the loop on every access.
To handle old portio memory ops, we simply install dispatching handlers
for portio memory regions when registering them with the memory core.
This removes the need for the old_portio field.
We can drop the additional aliasing of ioport regions and also the
special address space listener. cpu_in and cpu_out now simply call
address_space_read/write. And we can concentrate portio handling in a
single source file.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used to embed common CPU state into CPU subclasses.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is used during RDMA initialization in order to
transmit a description of all the RAM blocks to the
peer for later dynamic chunk registration purposes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory region type that translates addresses it is given,
then forwards them to a target address space. This is similar to
an alias, except that the mapping is more flexible than a linear
translation and trucation, and also less efficient since the
translation happens at runtime.
The implementation uses an AddressSpace mapping the target region to
avoid hierarchical dispatch all the way to the resolved region; only
iommu regions are looked up dynamically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[Modified to put translation in address_space_translate; assume
IOMMUs are not reachable from TCG. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding support for 2^64-byte sections, we will have to change
the structure of mem_add to avoid failures in int128_get64.
Reorganize the code now before introducing Int128.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only address_space_translate_for_iotlb needs to return the section.
Every caller of address_space_translate now uses only section->mr,
return it directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow to add support for unaligned memory regions: the subpage
container region can activate unaligned support unconditionally because
the read/write handler will now ensure that accesses are split as
required by calling address_space_rw. We can furthermore drop the
special handling of RAM subpages, address_space_rw takes care of this
already.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except for the case of setting the IOTLB entry in TCG mode, we can avoid
the subpage dispatching handlers and do the resolution directly on
address_space_lookup_region. An IOTLB entry describes a full page, not
only the region that the first access to a sub-divided page may return.
This patch therefore introduces a special translation function,
address_space_translate_for_iotlb, that avoids the subpage resolutions.
In contrast, callers of the existing address_space_translate service
will now always receive the terminal memory region section. This will be
important for breaking the BQL and for enabling unaligned memory region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed for some corner cases with para-virtual I/O ports.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces a wrapper for phys_page_find (before we complicate
address_space_translate with IOMMU translation). This function will
also encapsulate locking and reference counting when we introduce
BQL-free dispatching.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory API allows a MemoryRegion's size to be 2^64, as a special
case (otherwise the size always fits in a 64 bit integer). This meant
that attempts to access address zero in a 2^64 sized region would
assert in address_space_translate():
#3 0x00007ffff3e4d192 in __GI___assert_fail#(assertion=0x555555a43f32
"!a.hi", file=0x555555a43ef0 "include/qemu/int128.h", line=18,
function=0x555555a4439f "int128_get64") at assert.c:103
#4 0x0000555555877642 in int128_get64 (a=...)
at include/qemu/int128.h:18
#5 0x00005555558782f2 in address_space_translate (as=0x55555668d140,
/addr=0, xlat=0x7fffafac9918, plen=0x7fffafac9920, is_write=false)
at exec.c:221
Fix this by doing the 'min' operation in 128 bit arithmetic
rather than 64 bit arithmetic (we know the result of the 'min'
definitely fits in 64 bits because one of the inputs did).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory API is able to split it in two 4-byte accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old-style IOMMU lets you check whether an access is valid in a
given DMAContext. There is no equivalent for AddressSpace in the
memory API, implement it with a lookup of the dispatch tree.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used by address_space_access_valid too.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the previous patches, this is a common test for all read/write
functions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to use the special phys_section_rom section.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using phys_page_find to translate an AddressSpace to a MemoryRegionSection
is unwieldy. It requires to pass the page index rather than the address,
and later memory_region_section_addr has to be called. Replace
memory_region_section_addr with a function that does all of it: call
phys_page_find, compute the offset within the region, and check how
big the current mapping is. This way, a large flat region can be written
with a single lookup rather than a page at a time.
address_space_translate will also provide a single point where IOMMU
forwarding is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This provides the basics for detecting accesses to unassigned memory
as soon as they happen, and also for a simple implementation of
address_space_access_valid.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will soon reach this case when doing (unaligned) accesses that
span partly past the end of memory. We do not want to crash in
that case.
unassigned_mem_ops and rom_mem_ops are now the same.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to avoid a recompile before accessing unassigned
memory. In the end it will be treated as MMIO anyway.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used, the IOTLB always goes through io_mem_notdirty.
In fact in softmmu_template.h, if it were, QEMU would crash just
below the tests, as soon as io_mem_read/write dispatches to
error_mem_read/write.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The radix tree is statically sized to fit TARGET_PHYS_ADDR_SPACE_BITS.
If a larger memory region is registered, it will overflow.
Fix by limiting any section in the radix tree to the supported size.
This problem was not observed earlier since artificial regions (containers
and aliases) are eliminated by the memory core, leaving only device regions
which have reasonable sizes. An IOMMU however cannot be eliminated by the
memory core, and may have an artificial size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Fail the build if TARGET_PHYS_ADDR_SPACE_BITS is too large - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While sized to 15 bits in PhysPageEntry, the ptr field is ORed into the
iotlb entries together with a page-aligned pointer. The ptr field must
not overflow into this page-aligned value, assert that it is smaller than
the page size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See how we call memory_region_section_addr two lines below to
convert a physical address to a base address in the region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Wrapper to avoid open-coded loops and to make CPUState iteration
independent of CPUArchState.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
find_ram_offset() does not handle size=0 gracefully. It hands out the
same RAMBlock offset multiple times, leading to obscure failures later
on.
Add an assert to warn early if something is incorrectly allocating a
zero size RAMBlock.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Andreas Färber (16) and Igor Mammedov (1)
# Via Andreas Färber
* afaerber/qom-cpu:
target-lm32: Update VMStateDescription to LM32CPU
target-arm: Override do_interrupt for ARMv7-M profile
cpu: Replace do_interrupt() by CPUClass::do_interrupt method
cpu: Pass CPUState to cpu_interrupt()
exec: Pass CPUState to cpu_reset_interrupt()
cpu: Move halted and interrupt_request fields to CPUState
target-cris/helper.c: Update Coding Style
target-i386: Update VMStateDescription to X86CPU
cpu: Introduce cpu_class_set_vmsd()
cpu: Register VMStateDescription through CPUState
stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
vmstate: Make vmstate_register() static inline
target-sh4: Move PVR/PRR/CVR into SuperHCPUClass
target-sh4: Introduce SuperHCPU subclasses
cpus: Replace open-coded CPU loop in qmp_memsave() with qemu_get_cpu()
monitor: Use qemu_get_cpu() in monitor_set_cpu()
cpu: Fix qemu_get_cpu() to return NULL if CPU not found
Adds ramblocks' names to their backing files when using -mem-path. Eases
introspection and debugging.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Message-id: 1362423265-15855-1-git-send-email-peter@gridcentric.ca
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instance_id instead of -1.
Therefore add a CPU-specific CPUClass::vmsd field.
Unlike the legacy CPUArchState registration, rather register CPUState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 55e5c2850 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by returning CPU only if env is not NULL, otherwise CPU is
not found and function should return NULL.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix some of the nasty TCG race conditions and crashes by implementing
cpu_exit() as setting a flag which is checked at the start of each TB.
This avoids crashes if a thread or signal handler calls cpu_exit()
while the execution thread is itself modifying the TB graph (which
may happen in system emulation mode as well as in linux-user mode
with a multithreaded guest binary).
This fixes the crashes seen in LP:668799; however there are another
class of crashes described in LP:1098729 which stem from the fact
that in linux-user with a multithreaded guest all threads will
use and modify the same global TCG date structures (including the
generated code buffer) without any kind of locking. This means that
multithreaded guest binaries are still in the "unsupported"
category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move the declaration to qemu/cpu.h and add documentation.
The implementation still depends on CPUArchState for CPU iteration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add the new mutex that protects shared state between ram_save_live
and the iothread. If the iothread mutex has to be taken together
with the ramlist mutex, the iothread shall always be _outside_.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Umesh Deshpande <udeshpan@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This will be used to detect if last_block might have become invalid
across different calls to ram_save_live.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Umesh Deshpande <udeshpan@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Most of the time, only 2 items will be active (from/to for a string operation,
or code/data). But TCG guests likely won't have gigabytes of memory, so
this actually goes down to 1 item.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After allocating 32MB or more contiguous memory, huge pages
would seem to be ideal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Define a new global dma_context_memory which is a DMAContext corresponding
to the global address_space_memory AddressSpace. This can be used by
sysbus peripherals like sysbus-ohci which need to do DMA.
In particular, use it in the sysbus-ohci device, which fixes a
segfault when attempting to use that device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
pc: Drop redundant test for ROM memory region
exec: make some functions static
target-ppc: make some functions static
ppc: add missing static
vnc: add missing static
vl.c: add missing static
target-sparc: make do_unaligned_access static
m68k: Return semihosting errno values correctly
cadence_uart: More debug information
Conflicts:
target-m68k/m68k-semi.c
Add GETPC_EXT which is used by MMU helpers to selectively calculate the code
address of accessing guest memory when called from a qemu_ld/st optimized code
or a C function. Currently, it supports only i386 and x86-64 hosts.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* quintela/migration-next-20121017: (41 commits)
cpus: create qemu_in_vcpu_thread()
savevm: make qemu_file_put_notify() return errors
savevm: un-export qemu_file_set_error()
block-migration: handle errors with the return codes correctly
block-migration: Switch meaning of return value
block-migration: make flush_blks() return errors
buffered_file: buffered_put_buffer() don't need to set last_error
savevm: Only qemu_fflush() can generate errors
savevm: make qemu_fill_buffer() be consistent
savevm: unexport qemu_ftell()
savevm: unfold qemu_fclose_internal()
savevm: make qemu_fflush() return an error code
savevm: Remove qemu_fseek()
virtio-net: use qemu_get_buffer() in a temp buffer
savevm: unexport qemu_fflush
migration: make migrate_fd_wait_for_unfreeze() return errors
buffered_file: make buffered_flush return the error code
buffered_file: callers of buffered_flush() already check for errors
buffered_file: We can access directly to bandwidth_limit
buffered_file: unfold migrate_fd_close
...
* qemu-kvm/memory/dma: (23 commits)
pci: honor PCI_COMMAND_MASTER
pci: give each device its own address space
memory: add address_space_destroy()
dma: make dma access its own address space
memory: per-AddressSpace dispatch
s390: avoid reaching into memory core internals
memory: use AddressSpace for MemoryListener filtering
memory: move tcg flush into a tcg memory listener
memory: move address_space_memory and address_space_io out of memory core
memory: manage coalesced mmio via a MemoryListener
xen: drop no-op MemoryListener callbacks
kvm: drop no-op MemoryListener callbacks
xen_pt: drop no-op MemoryListener callbacks
vfio: drop no-op MemoryListener callbacks
memory: drop no-op MemoryListener callbacks
memory: provide defaults for MemoryListener operations
memory: maintain a list of address spaces
memory: export AddressSpace
memory: prepare AddressSpace for exporting
xen_pt: use separate MemoryListeners for memory and I/O
...
Currently we use a global radix tree to dispatch memory access. This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).
A side effect is that address_space_io also gains a dispatch table. When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary. Prepare for that by
moving the flush into a tcg-specific listener.
Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: Avi Kivity <avi@redhat.com>
With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.
The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
It is used nowhere else, and the corresponding MAX_CODE_GEN_BUFFER_SIZE
also lives there.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We had a hack for arm and sparc, allocating code_gen_prologue to a
special section. Which, honestly does no good under certain cases.
We've already got limits on code_gen_buffer_size to ensure that all
TBs can use direct branches between themselves; reuse this limit to
ensure the prologue is also reachable.
As a bonus, we get to avoid marking a page of the main executable's
data segment as executable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The hard-coded addresses inside alloc_code_gen_buffer only make sense
if we're building an executable that will actually run at the address
we've put into the linker scripts.
When we're building with -fpie, the executable will run at some
random location chosen by the kernel. We get better placement for
the code_gen_buffer if we allow the kernel to place the memory,
as it will tend to to place it near the executable, based on the
PROT_EXEC bit.
Since code_gen_prologue is always inside the executable, this effect
is easily seen at the end of most TB, with the exit_tb opcode, and
with any calls to helper functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For ARM we cap the buffer size to 16MB. Do not allocate 32MB in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It now consists of:
A macro definition of MAX_CODE_GEN_BUFFER_SIZE with host-specific values,
A function size_code_gen_buffer that applies most of the reasoning for
choosing a buffer size,
Three variations of a function alloc_code_gen_buffer that contain all
of the logic for allocating executable memory via a given allocation
mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
exec-obsolete.h used to hold pre-memory-API functions that were used from
device code prior to the transition to the memory API. Now that the
transition is complete, the name no longer describes the file. The
functions still need to be merged better into the memory core, but there's
no danger of anyone using them.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add some calls to xen_modified_memory to notify Xen about dirtybits
during migration.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Avi Kivity <avi@redhat.com>
This new helper/hook is used in the next patch to add an extra call in a single
place.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Avi Kivity <avi@redhat.com>
Current code doesn't actually work in 32-bit mode at all. Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS
Signed-off-by: Richard Henderson <rth@twiddle.net>
The address we pick in sparc64.ld is also 0x60000000, so doing a fixed map
on top of that is guaranteed to blow up. Choosing 0x40000000 is exactly
right for the max of code_gen_buffer_size set below.
No need to ever use MAP_FIXED. While getting our desired address helps
optimize the generated code, we won't fail if we don't get it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
cpu_physical_memory_write_rom(), despite the name, can also be used to
write images into RAM - and will often be used that way if the machine
uses load_image_targphys() into RAM addresses.
However, cpu_physical_memory_write_rom(), unlike cpu_physical_memory_rw()
doesn't invalidate any cached TBs which might be affected by the region
written.
This was breaking reset (under full emu) on the pseries machine - we loaded
our firmware image into RAM, and while executing it rewrite the code at
the entry point (correctly causing a TB invalidate/refresh). When we
reset the firmware image was reloaded, but the TB from the rewrite was
still active and caused us to get an illegal instruction trap.
This patch fixes the bug by duplicating the tb invalidate code from
cpu_physical_memory_rw() in cpu_physical_memory_write_rom().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It allows to disable memory merge support (KSM on Linux), which is
enabled by default otherwise.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new '[,dump-guest-core=on|off]' option to the '-machine' option. When
'dump-guest-core=off' is specified, guest memory is omitted from the core dump.
The default behavior continues to be to include guest memory when a core dump is
triggered. In my testing, this brought the core dump size down from 384MB to 6MB
on a 2GB guest.
Is anything additional required to preserve this setting for migration or
savevm? I don't believe so.
Changelog:
v3:
Eliminate globals as per Anthony's suggestion
set no dump from qemu_ram_remap() as well
v2:
move the option from -m to -machine, rename option dump -> dump-guest-core
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For each newly created RAM block, dirty bitmap is reallocated with g_realloc, which doesn't
make any promises on initial content of new extra data in returned buffer. In theory,
we initialize this new data with cpu_physical_memory_set_dirty_range() call. The
problem is, cpu_physical_memory_set_dirty_range() has a side effect of incrementing
ram_list.dirty_pages variable, but only for pages which are not already dirty. And
page "cleanliness" is determined using the same not yet uninitialized dirty bitmap
we've just reallocated. This results in inconsistency between real dirty page number
and value in ram_list.dirty_pages variable, which in turn could (and will) result
in errors during VM migration.
Zero initialize new dirty bitmap bytes to fix this problem.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove an out of date comment: this comment used to be attached to
cpu_register_physical_memory_log(), before commit 0f0cb164 accidentally
inserted a couple of other functions between the comment and its function.
It is in any case obsolete since (a) the function arguments it refers
to have been replaced with a single MemoryRegionSection* argument and
(b) the inability to handle regions whose offset_within_address_space
and offset_within_region aren't equally aligned was fixed as part of
the rewrite of this code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Registering a multi-page memory region that is non-page-aligned results
in a subpage from the start to the page boundary, some number of full
pages, and possibly another subpage from the last page boundary to the
end. The full pages will have a value for offset_within_region that is
not a multiple of TARGET_PAGE_SIZE. Accesses through softmmu are unable
to handle this and will segfault.
Handling full pages through subpages is not optimal, but only
non-page-aligned mappings take the penalty.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
subpage_register() expects "end" to be the last byte in the mapping.
Registering a non-page-aligned memory region that extends up to or
beyond a page boundary causes subpage_register() to silently fail
through the (end >= PAGE_SIZE) check.
This bug does not cause noticeable problems for mappings that do not
extend to a page boundary, though they do register an extra byte.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* qemu-kvm/uq/master:
virtio: move common irqfd handling out of virtio-pci
virtio: move common ioeventfd handling out of virtio-pci
event_notifier: add event_notifier_set_handler
memory: pass EventNotifier, not eventfd
ivshmem: wrap ivshmem_del_eventfd loops with transaction
ivshmem: use EventNotifier and memory API
event_notifier: add event_notifier_init_fd
event_notifier: remove event_notifier_test
event_notifier: add event_notifier_set
apic: Defer interrupt updates to VCPU thread
apic: Reevaluate pending interrupts on LVT_LINT0 changes
apic: Resolve potential endless loop around apic_update_irq
kvm: expose tsc deadline timer feature to guest
kvm_pv_eoi: add flag support
kvm: Don't abort on kvm_irqchip_add_msi_route()
Under Win32, EventNotifiers will not have event_notifier_get_fd, so we
cannot call it in common code such as hw/virtio-pci.c. Pass a pointer to
the notifier, and only retrieve the file descriptor in kvm-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
By default qemu will use MAP_PRIVATE for guest pages. This will write
protect pages and thus break on s390 systems that dont support this feature.
Therefore qemu has a hack to always use MAP_SHARED for s390. But MAP_SHARED
has other problems (no dirty pages tracking, a lot more swap overhead etc.)
Newer systems allow the distinction via KVM_CAP_S390_COW. With this feature
qemu can use the standard qemu alloc if available, otherwise it will use
the old s390 hack.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Refactor the code that is only needed for tcg to an static function.
Call that only when tcg is enabled. We can't refactor to a dummy
function in the kvm case, as qemu can be compiled at the same time
with tcg and kvm.
Signed-off-by: Juan Quintela <quintela@redhat.com>
This makes it easier to remove it from BusInfo.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
tb_invalidate_phys_addr has to be called with the exact physical address of
the breakpoint we add/remove, not just the page's base address.
Otherwise we easily fail to flush the right TB.
This breakage was introduced by the commit f3705d5329 "memory: make
phys_page_find() return an unadjusted".
This appeared to work for some guest architectures because their
cpu_get_phys_page_debug implementation returns full translated physical
address, not just the base of the TARGET_PAGE_SIZE-sized page.
Reported-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
They could suggest that all TBs of the page containing the range would
be invalidated.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This API will be used in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
If we execute linux-user code that does the following:
* A = mmap()
* execute code in A
* munmap(A)
* B = mmap(), but mmap returns the same address as A
* execute code in B
we end up executing a stale cached tb that contains translated code
from A, while we want new code from B.
This patch adds a TB flush for mmap'ed regions, before we return them,
avoiding the whole issue. It also adds a flush for munmap, so that we
don't execute stale TBs instead of getting a segfault.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fold is_ram_rom and is_ram_rom_romd() into callers.
Change is_romd() and section_addr() to take MemoryRegion
instead of MemoryRegionSection for consistency and
use memory_region_ prefix.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make s_cputlb_empty_entry 'const'.
Rename tlb_flush_jmp_cache() to tb_flush_jmp_cache().
Refactor code to add cpu_tlb_reset_dirty_all(),
memory_region_section_get_iotlb() and
memory_region_is_unassigned().
Remove unused cpu_tlb_update_dirty().
Fix coding style in areas to be moved.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Replace all type casts to 'long' or 'unsigned long' by 'intptr_t' or 'uintptr_t'.
For type casts which are only used to extract the lower bits of an address
or to modify those bits, signedness does not matter. There I always use 'uintptr_t'.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
