In the past, we prioritized IOMMU migration so that we have such a
priority order:
IOMMU > PCI Devices
When migrating a guest with both vIOMMU and a pcie-root-port, we'll
always migrate vIOMMU first, since pci buses will be seen to have the
same priority of general PCI devices.
That's problematic.
The thing is that PCI bus number information is stored in the root port,
and that is needed by vIOMMU during post_load(), e.g., to figure out
context entry for a device. If we don't have correct bus numbers for
devices, we won't be able to recover device state of the DMAR memory
regions, and things will be messed up.
So let's boost the PCIe root ports to be even with higher priority:
PCIe Root Port > IOMMU > PCI Devices
A smoke test shows that this patch fixes bug 1538953.
Also, apply this rule to all the PCI bus/bridge devices: ioh3420,
xio3130_downstream, xio3130_upstream, pcie_pci_bridge, pci-pci bridge,
i82801b11.
I noted that we set pcie_pci_bridge_dev_vmstate twice. Clean that up
together.
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Laurent Vivier <lvivier@redhat.com>
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1538953
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the same time, move VMSTATE_UINT32_SUB_ARRAY
beside the other UINT32 definitions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-8-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
current_migration has .instance_finalize callback, but it is not
called, because nobody unrefs current_migration. Fix that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now postcopy-able states are recognized by not NULL
save_live_complete_postcopy handler. But when we have several different
postcopy-able states, it is not convenient. Ram postcopy may be
disabled, while some other postcopy enabled, in this case Ram state
should behave as it is not postcopy-able.
This patch add separate has_postcopy handler to specify behaviour of
savevm state.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to do things at load time and at cleanup time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: 3df663e ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now we have some globals that can be configured for migration. Dump them
in HMP info migration for better debugging.
(we can also use this to monitor whether COMPAT fields are applied
correctly on compatible machines)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One less global variable, and it does only matter with migration.
We keep the old "--only-migratable" option, but also now we support:
-global migration.only-migratable=true
Currently still keep the old interface.
Hmm, now vl.c has no way to access migrate_get_current(). Export a
function for it to setup only_migratable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the old man "MigrationState" join the object family. Direct benefit
is that we can start to use all the property features derived from
current QDev, like: HW_COMPAT_* bits, command line setup for migration
parameters (so will never need to set them up each time using HMP/QMP,
this is really, really attractive for test writters), etc.
I see no reason to disallow this happen yet. So let's start from this
one, to see whether it would be anything good.
Now we init the MigrationState struct statically in main() to make sure
it's initialized after global properties are applied, since we'll use
them during creation of the object.
No functional change at all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That typedefs are needed on both files. New compilers (F25 where I
work) don't complain about repeating a typedef. But older ones
complain.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
We change the restoration priority of both the GICv3 and ITS. The
GICv3 must be restored before the ITS and the ITS needs to be restored
before PCIe devices since it translates their MSI transactions.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It was not from vmstate.c to start with.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
We can replace the four remaining calls of register_savevm() by
calls to register_savevm_live(). So we can remove the function and
as we don't allocate anymore the ops pointer with g_new0()
we don't have to free it then.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All functions were internal, except blk_mig_init() that is exported in
misc.h now.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All functions are internal except for ram_mig_init(). Create
migration/misc.h for this kind of functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Just for the functions exported from tls.c. Notice that we can't
remove the migration/migration.h include from tls.c because it access
directly MigrationState for the tls params.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So we remove all traces of them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Minor rearrangements due to rebase
Create an include for its exported functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Add proper header
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).
Allow the large chunk of block migration code to be compiled
out for those who don't use it.
Based on a downstream-patch we've had for a while by Jeff Cody.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
- When compiled out, allow seting block only with false value (eric)
Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We have change in the previous patch to use migration capabilities for
it. Notice that we continue using the old command line flags from
migrate command from the time being. Remove the set_params method as
now it is empty.
For savevm, one can't do a:
savevm -b/-i foo
but now one can do:
migrate_set_capability block on
savevm foo
And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages
Create one capability for block migration and one parameter for
incremental block migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- address all Markus comments
- use Markus and Eric text descriptions
- change logic another time
- improve text messages
The function is only used once, and nothing else in migration knows
about objects. Create the function vmstate_device_is_migratable() in
savem.c that really do the bit that is related with migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Yes, we don't have a good place to put that stuff.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is only used by migration, so move it there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=zXGN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'shorne/tags/pull-or-20170504' into staging
Openrisc Features and Fixes for qemu 2.10
# gpg: Signature made Thu 04 May 2017 01:41:45 AM BST
# gpg: using RSA key 0xC3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* shorne/tags/pull-or-20170504:
target/openrisc: Support non-busy idle state using PMR SPR
target/openrisc: Remove duplicate features property
target/openrisc: Implement full vmstate serialization
migration: Add VMSTATE_STRUCT_2DARRAY()
target/openrisc: implement shadow registers
migration: Add VMSTATE_UINTTL_2DARRAY()
target/openrisc: add numcores and coreid support
target/openrisc: Fixes for memory debugging
target/openrisc: Implement EPH bit
target/openrisc: Implement EVBAR register
MAINTAINERS: Add myself as openrisc maintainer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is internal to migration, not intended for other users.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Both the ram bitmap and the unsent bitmap are split by RAMBlock.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix compilation when DEBUG_POSTCOPY is enabled (thanks Hailiang)
For openrisc we implement tlb state as a 2d array of tlb entry structs.
This is added to allow easy storing of state of 2d arrays.
Signed-off-by: Stafford Horne <shorne@gmail.com>
In openRISC we are implementing the shadow registers as a 2d array.
Using this target long method rather than direct 32-bit alternatives is
consistent with the rest of our vm state serialization logic.
Signed-off-by: Stafford Horne <shorne@gmail.com>
In migration codes (especially in migration_thread()), max_size is used
in many place for the threshold value that we will start to do the final
flush and jump to the next stage to dump the whole rest things to
destination. However its name is confusing to first readers. Let's
rename it to "threshold_size" when proper and add a comment for it. No
functional change is made.
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Only user don't have a MigrationState handly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to call for the migrate_get_current() in more that half of the
uses, so call that inside.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Treat it like the rest of ram stats counters. Export its value the
same way. As an added bonus, no more MigrationState used in
migration_bitmap_sync();
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Again, dave was the one reviewing it
It can be recalculated from dirty_pages_rate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Dave was the one that reviewed it O:-)
This is a ram field that was inside MigrationState. Move it to
RAMState and make it the same that the other ram stats.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This are the last postcopy fields still at MigrationState. Once there
Move MigrationSrcPageRequest to ram.c and remove MigrationState
parameters where appropiate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It was on MigrationState when it is only used inside ram.c for
postcopy. Problem is that we need to access it without being able to
pass it RAMState directly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Its value can be calculated by other exported.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For compatibility, we need to still send a value, but just specify it
and comment the fact.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It reflects better what it does.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The kernel can't do UFFDIO_ZEROPAGE for huge pages, so we have
to allocate a temporary (always zero) page and use UFFDIO_COPYPAGE
on it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-9-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now we deal with normal size pages and huge pages we need
to tell the place handlers the size we're dealing with
and make sure the temporary page is large enough.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-8-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record the largest page size in use; we'll need it soon for allocating
temporary buffers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace the host page-size in the 'advise' command by a pagesize
summary bitmap; if the VM is just using normal RAM then
this will be exactly the same as before, however if they're using
huge pages they'll be different, and thus:
a) Migration from/to old qemu's that don't understand huge pages
will fail early.
b) Migrations with different size RAMBlocks will also fail early.
This catches it very early; earlier than the detailed per-block
check in the next patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make VMS_ARRAY_OF_POINTER cope with null pointers. Previously the
reward for trying to migrate an array with some null pointers in it was
an illegal memory access, that is a swift and painless death of the
process. Let's make vmstate cope with this scenario.
The general approach is, when we encounter a null pointer (element),
instead of following the pointer to save/load the data behind it, we
save/load a placeholder. This way we can detect if we expected a null
pointer at the load side but not null data was saved instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
VMSTATE_WITH_TMP is for handling structures where some calculation
or rearrangement of the data needs to be performed before the data
hits the wire.
For example, where the value on the wire is an offset from a
non-migrated base, but the data in the structure is the actual pointer.
To use it, a temporary type is created and a vmsd used on that type.
The first element of the type must be 'parent' a pointer back to the
type of the main structure. VMSTATE_WITH_TMP takes care of allocating
and freeing the temporary before running the child vmsd.
The post_load/pre_save on the child vmsd can copy things from the parent
to the temporary using the parent pointer and do any other calculations
needed; it can then use normal VMSD entries to do the actual data
storage without having to fiddle around with qemu_get_*/qemu_put_*
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
VMSTATE_UNUSED_VARRAY_UINT32 is used to skip a chunk of the stream
that's an n-element array; note the array size and the dynamic value
read never get multiplied so there's no overflow risk.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170203160651.19917-2-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.
So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.
Fix it by using timer to realize checkpoint-delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the start of postcopy migration there are some non-dirty pages which have
already been migrated. These pages are no longer needed on the source vm so that
we can free them and it doen't hurt to complete the migration.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-4-pbutsykin@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This feature frees the migrated memory on the source during postcopy-ram
migration. In the second step of postcopy-ram migration when the source vm
is put on pause we can free unnecessary memory. It will allow, in particular,
to start relaxing the memory stress on the source host in a load-balancing
scenario.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-3-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manually merged in Pavel's 'migration: madvise error_report fixup!'
The qdev id of a device can be huge if it's on the end of a chain
of bridges; in reality such chains shouldn't occur but they can
be made to by chaining PCIe bridges together.
The migration format has a number of 256 character long format
limits; check we don't hit them (we already use pstrcat/cpy but
that just protects us from buffer overruns, we fairly quickly
hit an assert).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I'll be adding an error to it in a subsequent patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
commit fe904ea824 fixed a case
which migration aborted QEMU because it didn't regain the control
of images while some errors happened.
Actually, there are another two cases can trigger the same error reports:
" bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed",
Case 1, codes path:
migration_thread()
migration_completion()
bdrv_inactivate_all() ----------------> inactivate images
qemu_savevm_state_complete_precopy()
socket_writev_buffer() --------> error because destination fails
qemu_fflush() ----------------> set error on migration stream
-> qmp_migrate_cancel() ----------------> user cancelled migration concurrently
-> migrate_set_state() ------------------> set migrate CANCELLIN
migration_completion() -----------------> go on to fail_invalidate
if (s->state == MIGRATION_STATUS_ACTIVE) -> Jump this branch
Case 2, codes path:
migration_thread()
migration_completion()
bdrv_inactivate_all() ----------------> inactivate images
migreation_completion() finished
-> qmp_migrate_cancel() ---------------> user cancelled migration concurrently
qemu_mutex_lock_iothread();
qemu_bh_schedule (s->cleanup_bh);
As we can see from above, qmp_migrate_cancel can slip in whenever
migration_thread does not hold the global lock. If this happens after
bdrv_inactive_all() been called, the above error reports will appear.
To prevent this, we can call bdrv_invalidate_cache_all() in qmp_migrate_cancel()
directly if we find images become inactive.
Besides, bdrv_invalidate_cache_all() in migration_completion() doesn't have the
protection of big lock, fix it by add the missing qemu_mutex_lock_iothread();
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1485244792-11248-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_add_blocker should rightly fail if the '--only-migratable'
option was specified and the device in use should not be able to
perform the action which results in an unmigratable VM.
Make migrate_add_blocker return -EACCES in this case.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-6-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Add a new option "--only-migratable" in qemu which will allow to add
only those devices which will not fail qemu after migration. Devices
set with the flag 'unmigratable' cannot be added when this option will
be used.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-3-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently we cannot directly transfer a QTAILQ instance because of the
limitation in the migration code. Here we introduce an approach to
transfer such structures. We created VMStateInfo vmstate_info_qtailq
for QTAILQ. Similar VMStateInfo can be created for other data structures
such as list.
When a QTAILQ is migrated from source to target, it is appended to the
corresponding QTAILQ structure, which is assumed to have been properly
initialized.
This approach will be used to transfer pending_events and ccs_list in spapr
state.
We also create some macros in qemu/queue.h to access a QTAILQ using pointer
arithmetic. This ensures that we do not depend on the implementation
details about QTAILQ in the migration code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-3-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
IOMMU needs to be migrated before all the PCI devices (in case there are
devices that will request for address translation). So marking it with a
priority higher than the default (which PCI devices and other belong).
Migration framework handled the rest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>