QEMU issues the ioctl(KVM_CAP_PPC_FWNMI) on the first vCPU.
If the first vCPU is currently running, the vCPU mutex is held
and the ioctl() cannot be done and waits until the mutex is released.
This never happens and the VM is stuck.
To avoid this deadlock, issue the ioctl on the same vCPU doing the
RTAS call.
The problem can be reproduced by booting a guest with several vCPUs
(the probability to have the problem is (n - 1) / n, n = # of CPUs),
and then by triggering a kernel crash with "echo c >/proc/sysrq-trigger".
On the reboot, the kernel hangs after:
...
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x48000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x0001c06f8f4f91a7
[ 0.000000] possible = 0x0003fbffcf5fb1a7
[ 0.000000] always = 0x00000003800081a1
[ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000
[ 0.000000] mmu_features = 0x3c006041
[ 0.000000] firmware_features = 0x00000085455a445f
[ 0.000000] physical_start = 0x8000000
[ 0.000000] -----------------------------------------------------
[ 0.000000] numa: NODE_DATA [mem 0x47f33c80-0x47f3ffff]
Fixes: ec010c0066 ("ppc/spapr: KVM FWNMI should not be enabled until guest requests it")
Cc: npiggin@gmail.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200724083533.281700-1-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tracked down with scripts/coccinelle/err-bad-newline.cocci.
Cc: Peter Xu <peterx@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
It is not part of Power ISA Version 3.1.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200623154534.266065-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The code related to PPC Virtual Hypervisor is pointless in user-mode.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526172427.17460-5-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The penultimate argument of function ppc_radix64_partition_scoped_xlate()
has the bool type.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159051003729.407106.10610703877543955831.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
gdbstub shouldn't silently change guest visible state when doing address
translation. Since the R/C bits can only be updated when handling a MMU
fault, let's reuse the cause_excp flag and rename it to guest_visible.
While here drop a not very useful comment.
This was found while reading the code. I could verify that this affects
both powernv and pseries, but I failed to observe any actual bug.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941063899.240484.2778628492106387793.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last two arguments have the bool type. Also, we shouldn't raise an
exception when using gdbstub.
This was found while reading the code. Since it only affects the powernv
machine, I didn't dig further to find an actual bug.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941063281.240484.9114539141307005992.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As per CODING_STYLE.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941062665.240484.2663106458734800894.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is the job of the ppc_radix64_get_fully_qualified_addr() function
which is called at the beginning of ppc_radix64_xlate() to set both
lpid *and* pid. It doesn't buy us anything to initialize them first.
Worse, a bug in ppc_radix64_get_fully_qualified_addr(), eg. failing to
set either lpid or pid, would be undetectable by static analysis tools
like coverity.
Some recent versions of gcc (eg. gcc-9.3.1-2.fc30) may still think
that lpid or pid is used uninitialized though, so this also adds
default cases in the switch statements to make it clear this cannot
happen.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941062048.240484.9693581559252337111.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This doesn't require write access to the CPU registers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941061434.240484.10700096396035994133.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This doesn't require write access to the CPU structure.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941060817.240484.14621015211317485106.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On reboot, all memory that was previously added using object_add and
device_add is placed in this DIMM area.
The new SPAPR_LMB_FLAGS_HOTREMOVABLE flag helps Linux to put this memory in
the correct memory zone, so no unmovable allocations are made there,
allowing the object to be easily hot-removed by device_del and
object_del.
This new flag was accepted in Power Architecture documentation.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20200511200201.58537-1-leobras.c@gmail.com>
[dwg: Fixed syntax error spotted by Cédric Le Goater]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 adds scv and rfscv instructions and the system call vectored
interrupt. Linux does not support this instruction yet but it has
been tested with a modified kernel that runs on real hardware.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200507115328.789175-1-npiggin@gmail.com>
[dwg: Corrected an overlong line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some tabs crept in with a recent change.
Fixes: 6dc6b55791 "target/ppc: Improve syscall exception logging"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158886788307.1560068.14096740175576278978.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CPU() macro is defined as:
#define CPU(obj) ((CPUState *)(obj))
which expands to:
((CPUState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__, __func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary CPU() casts when we already know the pointer
is of CPUState type.
Patch created mechanically using spatch with this script:
@@
typedef CPUState;
CPUState *s;
@@
- CPU(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-2-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
-----BEGIN PGP SIGNATURE-----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=INvG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' into staging
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with Clang v9, -Wtype-limits is implemented and triggers a
few "result of comparison is always true" errors when compiling PPC32
targets.
The comparisons seem to be necessary only on PPC64, since the
else branch in PPC32 only has a "g_assert_not_reached();" in all cases.
This patch restructures the code so that the actual if/else is done on a
local flag variable, that is set accordingly for PPC64, and always
true for PPC32.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20200505183818.32688-2-dbuono@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Radix tree translation model currently supports process-scoped
translation for the PowerNV machine (Hypervisor mode) and for the
pSeries machine (Guest mode). Guests running under an emulated
Hypervisor (PowerNV machine) require a new type of Radix translation,
called partition-scoped, which is missing today.
The Radix tree translation is a 2 steps process. The first step,
process-scoped translation, converts an effective Address to a guest
real address, and the second step, partition-scoped translation,
converts a guest real address to a host real address.
There are difference cases to covers :
* Hypervisor real mode access: no Radix translation.
* Hypervisor or host application access (quadrant 0 and 3) with
relocation on: process-scoped translation.
* Guest OS real mode access: only partition-scoped translation.
* Guest OS real or guest application access (quadrant 0 and 3) with
relocation on: both process-scoped translation and partition-scoped
translations.
* Hypervisor access in quadrant 1 and 2 with relocation on: both
process-scoped translation and partition-scoped translations.
The radix tree partition-scoped translation is performed using tables
pointed to by the first double-word of the Partition Table Entries and
process-scoped translation uses tables pointed to by the Process Table
Entries (second double-word of the Partition Table Entries).
Both partition-scoped and process-scoped translations process are
identical and thus the radix tree traversing code is largely reused.
However, errors in partition-scoped translations generate hypervisor
exceptions.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-5-clg@kaod.org>
[dwg: Fixup from Greg Kurz folded in]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ppc_radix64_walk_tree() routine walks through the nested radix
tables to look for a PTE.
Split it in two and introduce a new routine ppc_radix64_next_level()
which we will use for partition-scoped Radix translation when
translating the process tree addresses. The prototypes are slightly
change to use a 'AddressSpace *' parameter, instead of a 'PowerPCCPU *'
which is not required, and to return an error code instead of a PTE
value. It clarifies error handling in the callers.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is moving code under a new ppc_radix64_xlate() routine shared by
the MMU Radix page fault handler and the 'get_phys_page_debug' PPC
callback. The difference being that 'get_phys_page_debug' does not
generate exceptions.
The specific part of process-scoped Radix translation is moved under
ppc_radix64_process_scoped_xlate() in preparation of the future support
for partition-scoped Radix translation. Routines raising the exceptions
now take a 'cause_excp' bool to cover the 'get_phys_page_debug' case.
It should be functionally equivalent.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will ease the introduction of new routines for partition-scoped
Radix translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200330094946.24678-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the ISA the root page directory size of a radix tree for
either process- or partition-scoped translation must be >= 5.
Thus add this to the list of conditions checked when validating the
partition table entry in validate_pate();
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200330094946.24678-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than have the helper take an optional vector address
override, instead have its caller modify env->nip itself.
This is more consistent when adding pnv nmi support, and also
with mce injection added later.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325144147.221875-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
system calls (at least in Linux) use registers r3-r8 for inputs, so
include those registers in the dump.
This also adds a mode for PAPR hcalls, which have a different calling
convention.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200317054918.199161-1-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now unify the implementation of the 3 VSPLTI instructions.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When converted to use GByteArray in commits 462474d760 and
a010bdbe71, the call to stfq_p() was removed. This call
serialize a float.
Since we now use a GByteArray, we can not use stfq_p() directly.
Introduce the gdb_get_float64() helper to load a float64 register.
Fixes: 462474d760 ("target/m68k: use gdb_get_reg helpers")
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200414163853.12164-3-philmd@redhat.com>
Message-Id: <20200430190122.4592-3-alex.bennee@linaro.org>
Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If mtmsr L=1 sets MSR[EE] while there is a maskable exception pending,
it does not cause an interrupt. This causes the test case to hang:
https://lists.gnu.org/archive/html/qemu-ppc/2019-10/msg00826.html
More recently, Linux reduced the occurance of operations (e.g., rfi)
which stop translation and allow pending interrupts to be processed.
This started causing hangs in Linux boot in long-running kernel tests,
running with '-d int' shows the decrementer stops firing despite DEC
wrapping and MSR[EE]=1.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208301.html
The cause is the broken mtmsr L=1 behaviour, which is contrary to the
architecture. From Power ISA v3.0B, p.977, Move To Machine State Register,
Programming Note states:
If MSR[EE]=0 and an External, Decrementer, or Performance Monitor
exception is pending, executing an mtmsrd instruction that sets
MSR[EE] to 1 will cause the interrupt to occur before the next
instruction is executed, if no higher priority exception exists
Fix this by handling L=1 exactly the same way as L=0, modulo the MSR
bits altered.
The confusion arises from L=0 being "context synchronizing" whereas L=1
is "execution synchronizing", which is a weaker semantic. However this
is not a relaxation of the requirement that these exceptions cause
interrupts when MSR[EE]=1 (e.g., when mtmsr executes to completion as
TCG is doing here), rather it specifies how a pipelined processor can
have multiple instructions in flight where one may influence how another
behaves.
Cc: qemu-stable@nongnu.org
Reported-by: Anton Blanchard <anton@ozlabs.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200414111131.465560-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The KVM FWNMI capability should be enabled with the "ibm,nmi-register"
rtas call. Although MCEs from KVM will be delivered as architected
interrupts to the guest before "ibm,nmi-register" is called, KVM has
different behaviour depending on whether the guest has enabled FWNMI
(it attempts to do more recovery on behalf of a non-FWNMI guest).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325142906.221248-2-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ppc_dcr_read() and ppc_dcr_write() functions call into callbacks
in device code, so we need to hold the QEMU iothread lock while
calling them. This is the case already for the callsites in
kvmppc_handle_dcr_read/write(), but we must also take the lock when
calling the helpers from TCG.
This fixes a bug where attempting to initialise the PPC405EP
SDRAM will cause an assertion when sdram_map_bcr() attempts
to remap memory regions.
Reported-by: Amit Lazar <abasarlaz@hotmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200322192258.14039-1-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new ISA v3.0 slbia variants have not been implemented for TCG,
which can lead to crashing when a POWER9 machine boots Linux using
the hash MMU, for example ("disable_radix" kernel command line).
Add them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200319064439.1020571-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fixed compile error for USER_ONLY builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbia must invalidate TLBs even if it does not remove a valid SLB
entry, because slbmte can overwrite valid entries without removing
their TLBs.
As the architecture says, slbia invalidates all lookaside information,
not conditionally based on if it removed valid entries.
It does not seem possible for POWER8 or earlier Linux kernels to hit
this bug because it never changes its kernel SLB translations, and it
should always have valid entries if any accesses are made to userspace
regions. However other operating systems which may modify SLB entry 0
or do more fancy things with segments might be affected.
When POWER9 slbia support is added in the next patch, this becomes a
real problem because some new slbia variants don't invalidate all
non-zero entries.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200318044135.851716-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl5xdnsUHGVoYWJrb3N0
QHJlZGhhdC5jb20ACgkQKAeTb5hNxaYkGA/9Fn1tCdW/74CEREPbcKNOf8twmCr2
L4qykix7mFcZXstFhEQuoNJQMz8mEPJngOfUSQY1c9w4psf0AXE6q3wbdNcxxdj1
1/+cPbaRuoF8EKw63MgR3AaReuWtAV+sGS4+eKBMJTMUbl03pOYARE+irCWJU6rd
YdP0t6CX0NWF4afv+2wMeeZVr+IcKEo81jCCCSjmM0YLkwvu0Vs5ng3jE7vtFKPj
MQHMyqD/lz0FwyksBiOLwjOCbnmIydWc/8VV68UH5ulxka96jk8CwmI0+A9v2UMQ
4PjQ84UeQclJTbec+h/Qy8DoCP3qiqijFMRau2wo1UWCsAjMcaRIJjIe5CSOJFRu
3FrP2FEJCZiWjh11b/x3jIyjK6MDjv3Y1oky1j5VkCnFUNLHbXUA2KY3jaZ/pf+1
BDqa6lNDYJBN+FQQt0yXDWAdGLUxxP87S9jmU9RULzwAwCic0FxVR/a5zk9EUDi0
mA+WL0ekfhIEVACdHYuCTxujGq8QnGiCppr1Wgx3t+GgveR8AjXdd/KclcKskYiw
ozbujtBPQUImuq3xi6FTkRHXuEW+zc+IFbhZ3Zq5OhmJmpdgmSHryFcKAdvNJH/z
VllKAsLg1hffm+PjlpuZLBucC4PBrvHbS7htHhMaemEiJHO9V5EfGDWQdELNRM8p
sKymFNs5XjzQcGE=
=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
Provide for an alternate delivery location, -1 defaults to the
architected address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-7-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
FWNMI machine check delivery misses a few things that will make it fail
with TCG at least (which we would like to allow in future to improve
testing).
It's not nice to scatter interrupt delivery logic around the tree, so
move it to excp_helper.c and share code where possible.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-5-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
rlwinm cannot just AND with Mask if shift value is zero on ppc64 when
Mask Begin is greater than Mask End and high bits are set to 1.
Note that PowerISA 3.0B says that for `rlwinm' ROTL32 is used, and
ROTL32 is defined (in 3.3.14) so that rotated value should have two
copies of lower word of the source value.
This seems to be another incarnation of the fix from 820724d170
("target-ppc: Fix rlwimi, rlwinm, rlwnm again"), except I leave
optimization when Mask value is less than 32 bits.
Fixes: 7b4d326f47 ("target-ppc: Use the new deposit and extract ops")
Cc: qemu-stable@nongnu.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Message-Id: <20200309204557.14836-1-vt@altlinux.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function calculates the maximum size of the RMA as implied by the
host's page size of structure of the VRMA (there are a number of other
constraints on the RMA size which will supersede this one in many
circumstances).
The current interface takes the current RMA size estimate, and clamps it
to the VRMA derived size. The only current caller passes in an arguably
wrong value (it will match the current RMA estimate in some but not all
cases).
We want to fix that, but for now just keep concerns separated by having the
KVM helper function just return the VRMA derived limit, and let the caller
combine it with other constraints. We call the new function
kvmppc_vrma_limit() to more clearly indicate its limited responsibility.
The helper should only ever be called in the KVM enabled case, so replace
its !CONFIG_KVM stub with an assert() rather than a dummy value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cedric Le Goater <clg@fr.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, we construct the SLBE used for VRMA translations when the LPCR
is written (which controls some bits in the SLBE), then use it later for
translations.
This is a bit complex and confusing - simplify it by simply constructing
the SLBE directly from the LPCR when we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When the LPCR is written, we update the env->rmls field with the RMA limit
it implies. Simplify things by just calculating the value directly from
the LPCR value when we need it.
It's possible this is a little slower, but it's unlikely to be significant,
since this is only for real mode accesses in a translation configuration
that's not used very often, and the whole thing is behind the qemu TLB
anyway. Therefore, keeping the number of state variables down and not
having to worry about making sure it's always in sync seems the better
option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The table of RMA limits based on the LPCR[RMLS] field is slightly wrong.
We're missing the RMLS == 0 => 256 GiB RMA option, which is available on
POWER8, so add that.
The comment that goes with the table is much more wrong. We *don't* filter
invalid RMLS values when writing the LPCR, and there's not really a
sensible way to do so. Furthermore, while in theory the set of RMLS values
is implementation dependent, it seems in practice the same set has been
available since around POWER4+ up until POWER8, the last model which
supports RMLS at all. So, correct that as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently we use a big switch statement in ppc_hash64_update_rmls() to work
out what the right RMA limit is based on the LPCR[RMLS] field. There's no
formula for this - it's just an arbitrary mapping defined by the existing
CPU implementations - but we can make it a bit more readable by using a
lookup table rather than a switch. In addition we can use the MiB/GiB
symbols to make it a bit clearer.
While there we add a bit of clarity and rationale to the comment about
what happens if the LPCR[RMLS] doesn't contain a valid value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When we store the Logical Partitioning Control Register (LPCR) we have a
big switch statement to work out which are valid bits for the cpu model
we're emulating.
As well as being ugly, this isn't really conceptually correct, since it is
based on the mmu_model variable, whereas the LPCR isn't (only) about the
MMU, so mmu_model is basically just acting as a proxy for the cpu model.
Handle this in a simpler way, by adding a suitable lpcr_mask to the QOM
class.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently we create the Real Mode Offset Register (RMOR) on all Book3S cpus
from POWER7 onwards. However the translation mode which the RMOR controls
is no longer supported in POWER9, and so the register has been removed from
the architecture.
Remove it from our model on POWER9 and POWER10.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
For the "pseries" machine, we use "virtual hypervisor" mode where we
only model the CPU in non-hypervisor privileged mode. This means that
we need guest physical addresses within the modelled cpu to be treated
as absolute physical addresses.
We used to do that by clearing LPCR[VPM0] and setting LPCR[RMLS] to a high
limit so that the old offset based translation for guest mode applied,
which does what we need. However, POWER9 has removed support for that
translation mode, which meant we had some ugly hacks to keep it working.
We now explicitly handle this sort of translation for virtual hypervisor
mode, so the hacks aren't necessary. We don't need to set VPM0 and RMLS
from the machine type code - they're now ignored in vhyp mode. On the cpu
side we don't need to allow LPCR[RMLS] to be set on POWER9 in vhyp mode -
that was only there to allow the hack on the machine side.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
When running guests under a hypervisor, the hypervisor obviously needs to
be protected from guest accesses even if those are in what the guest
considers real mode (translation off). The POWER hardware provides two
ways of doing that: The old way has guest real mode accesses simply offset
and bounds checked into host addresses. It works, but requires that a
significant chunk of the guest's memory - the RMA - be physically
contiguous in the host, which is pretty inconvenient. The new way, known
as VRMA, has guest real mode accesses translated in roughly the normal way
but with some special parameters.
In POWER7 and POWER8 the LPCR[VPM0] bit selected between the two modes, but
in POWER9 only VRMA mode is supported and LPCR[VPM0] no longer exists. We
handle that difference in behaviour in ppc_hash64_set_isi().. but not in
other places that we blindly check LPCR[VPM0].
Correct those instances with a new helper to tell if we should be in VRMA
mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On ppc we have the concept of virtual hypervisor ("vhyp") mode, where we
only model the non-hypervisor-privileged parts of the cpu. Essentially we
model the hypervisor's behaviour from the point of view of a guest OS, but
we don't model the hypervisor's execution.
In particular, in this mode, qemu's notion of target physical address is
a guest physical address from the vcpu's point of view. So accesses in
guest real mode don't require translation. If we were modelling the
hypervisor mode, we'd need to translate the guest physical address into
a host physical address.
Currently, we handle this sloppily: we rely on setting up the virtual LPCR
and RMOR registers so that GPAs are simply HPAs plus an offset, which we
set to zero. This is already conceptually dubious, since the LPCR and RMOR
registers don't exist in the non-hypervisor portion of the CPU. It gets
worse with POWER9, where RMOR and LPCR[VPM0] no longer exist at all.
Clean this up by explicitly handling the vhyp case. While we're there,
remove some unnecessary nesting of if statements that made the logic to
select the correct real mode behaviour a bit less clear than it could be.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PowerPC 970 CPU was a cut-down POWER4, which had hypervisor capability.
However, it can be (and often was) strapped into "Apple mode", where the
hypervisor capabilities were disabled (essentially putting it always in
hypervisor mode).
That's actually the only mode of the 970 we support in qemu, and we're
unlikely to change that any time soon. However, we do have a partial
implementation of the 970's HID4 register which affects things only
relevant for hypervisor mode.
That stub is also really ugly, since it attempts to duplicate the effects
of HID4 by re-encoding it into the LPCR register used in newer CPUs, but
in a really confusing way.
Just get rid of it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
a4f30719a8, way back in 2007 noted that "PowerPC hypervisor mode is not
fundamentally available only for PowerPC 64" and added a 32-bit version
of the MSR[HV] bit.
But nothing was ever really done with that; there is no meaningful support
for 32-bit hypervisor mode 13 years later. Let's stop pretending and just
remove the stubs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Server class POWER CPUs have a "compat" property, which was obsoleted
by commit 7843c0d60d and replaced by a "max-cpu-compat" property on the
pseries machine type. A hack was introduced so that passing "compat" to
-cpu would still produce the desired effect, for the sake of backward
compatibility : it strips the "compat" option from the CPU properties
and applies internally it to the pseries machine. The accessors of the
"compat" property were updated to do nothing but warn the user about the
deprecated status when doing something like:
$ qemu-system-ppc64 -global POWER9-family-powerpc64-cpu.compat=power9
qemu-system-ppc64: warning: CPU 'compat' property is deprecated and has no
effect; use max-cpu-compat machine property instead
This was merged during the QEMU 2.10 timeframe, a few weeks before we
formalized our deprecation process. As a consequence, the "compat"
property fell through the cracks and was never listed in the officialy
deprecated features.
We are now eight QEMU versions later, it is largely time to mention it
in qemu-deprecated.texi. Also, since -global XXX-powerpc64-cpu.compat=
has been emitting warnings since QEMU 2.10 and the usual way of setting
CPU properties is with -cpu, completely remove the "compat" property.
Keep the hack so that -cpu XXX,compat= stays functional some more time,
as required by our deprecation process.
The now empty powerpc_servercpu_properties[] list which was introduced
for "compat" and never had any other use is removed on the way. We can
re-add it in the future if the need for a server class POWER CPU specific
property arises again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158274357799.140275.12263135811731647490.stgit@bahia.lan>
[dwg: Convert from .texi to .rst to match upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu env struct is quite complex but comments supposed to explain
it in its definition just make it harder to read. Reformat and reword
some comments to make it clearer and more readable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8707144ab1ccf9c5c89a39c2d7a0b02307ca25d4.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move fp_status and fpscr closer to other floating point and vector
related members in cpu env definition so they are in one group.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b50e9e7eec2c383ae878b397d0b2927efc9ea43.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
"Deferred" was misspelled as "differed" in some comments, correct this
typo,
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200214155748.0896B745953@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 74433bf083 added some includes but added them twice. Since
these are guarded against multiple inclusion including them once is
enough.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200212223207.5A37574637F@zero.eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using probe_write instead of tlb_vaddr_to_host means that we
process watchpoints and notdirty pages more efficiently.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200129235040.24022-5-richard.henderson@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The value of addr has already been masked, just above.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200129235040.24022-4-richard.henderson@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use a minimum number of mmu lookups for the contiguous bytes
that are accessed. If the lookup succeeds, we can finish the
operation with host addresses only.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200129235040.24022-3-richard.henderson@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use a minimum number of mmu lookups for the contiguous bytes
that are accessed. If the lookup succeeds, we can finish the
operation with host addresses only.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200129235040.24022-2-richard.henderson@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Upon a machine check exception (MCE) in a guest address space,
KVM causes a guest exit to enable QEMU to build and pass the
error to the guest in the PAPR defined rtas error log format.
This patch builds the rtas error log, copies it to the rtas_addr
and then invokes the guest registered machine check handler. The
handler in the guest takes suitable action(s) depending on the type
and criticality of the error. For example, if an error is
unrecoverable memory corruption in an application inside the
guest, then the guest kernel sends a SIGBUS to the application.
For recoverable errors, the guest performs recovery actions and
logs the error.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[Assume SLOF has allocated enough room for rtas error log]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200130184423.20519-5-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory error such as bit flips that cannot be corrected
by hardware are passed on to the kernel for handling.
If the memory address in error belongs to guest then
the guest kernel is responsible for taking suitable action.
Patch [1] enhances KVM to exit guest with exit reason
set to KVM_EXIT_NMI in such cases. This patch handles
KVM_EXIT_NMI exit.
[1] https://www.spinics.net/lists/kvm-ppc/msg12637.html
(e20bbd3d and related commits)
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200130184423.20519-4-ganeshgr@linux.ibm.com>
[dwg: #ifdefs to fix compile for 32-bit target]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce fwnmi an spapr capability and add a helper function
which tries to enable it, which would be used by following patch
of the series. This patch by itself does not change the existing
behavior.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[eliminate cap_ppc_fwnmi, add fwnmi cap to migration state
and reprhase the commit message]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200130184423.20519-3-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix PPC_INPUT macro to work with more complex expressions by
protecting its argument with parentheses.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200130021619.65FAB747871@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When in HV mode, if EA[0] is 0, the Hypervisor Offset Real Mode
Register controls the access.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144154.10170-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The privileged message send and clear instructions (msgsndp & msgclrp)
are privileged, but will generate a hypervisor facility unavailable
exception if not enabled in the HFSCR and executed in privileged
non-hypervisor state.
Add checks when accessing the DPDES register and when using the
msgsndp and msgclrp isntructions.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200120104935.24449-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Control facility for POWER8 processors and later
provides a mechanism for the hypervisor to send messages to other
threads in the system (msgsnd instruction) and cause hypervisor-level
exceptions. Privileged non-hypervisor programs can also send messages
(msgsndp instruction) but are restricted to the threads of the same
subprocessor and cause privileged-level exceptions.
The Directed Privileged Doorbell Exception State (DPDES) register
reflects the state of pending privileged doorbell exceptions and can
be used to modify that state. The register can be used to read and
modify the state of privileged doorbell exceptions for all threads of
a subprocessor and thus is a shared facility for that subprocessor.
The register can be read/written by the hypervisor and read by the
supervisor if enabled in the HFSCR, otherwise a hypervisor facility
unavailable exception is generated.
The privileged message send and clear instructions (msgsndp & msgclrp)
are used to generate and clear the presence of a directed privileged
doorbell exception, respectively. The msgsndp instruction can be used
to target any thread of the current subprocessor, msgclrp acts on the
thread issuing the instruction. These instructions are privileged, but
will generate a hypervisor facility unavailable exception if not
enabled in the HFSCR and executed in privileged non-hypervisor
state. The HV facility unavailable exception will be addressed in
other patch.
Add and implement this register and instructions by reading or
modifying the pending interrupt state of the cpu.
Note that TCG only supports one thread per core and so we only need to
worry about the cpu making the access.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200120104935.24449-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The kvm_handle_debug function can return 0 to go back into the guest
or return 1 to notify the gdbstub thread and pass control to GDB.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200110151344.278471-2-farosas@linux.ibm.com>
Tested-by: Leonardo Bras <leonardo@ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We actually want to access the accelerator, not the machine, so
use the current_accel() wrapper instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all targets to use cpu_class_set_parent_reset() with the following
coccinelle script:
@@
type CPUParentClass;
CPUParentClass *pcc;
CPUClass *cc;
identifier parent_fn;
identifier child_fn;
@@
+cpu_class_set_parent_reset(cc, child_fn, &pcc->parent_fn);
-pcc->parent_fn = cc->reset;
...
-cc->reset = child_fn;
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <157650847817.354886.7047137349018460524.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are only two uses. Within dcbz_common, the local variable
mmu_idx already contains the epid computation, and we can avoid
repeating it for the store. Within helper_icbiep, the usage is
trivially expanded using PPC_TLB_EPID_LOAD.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Invoking KVM_SVM_OFF ioctl for TCG guests will lead to a QEMU crash.
Fix this by ensuring that we don't call KVM_SVM_OFF ioctl on TCG.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Fixes: 4930c1966249 ("ppc/spapr: Support reboot of secure pseries guest")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20200102054155.13175-1-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A pseries guest can be run as a secure guest on Ultravisor-enabled
POWER platforms. When such a secure guest is reset, we need to
release/reset a few resources both on ultravisor and hypervisor side.
This is achieved by invoking this new ioctl KVM_PPC_SVM_OFF from the
machine reset path.
As part of this ioctl, the secure guest is essentially transitioned
back to normal mode so that it can reboot like a regular guest and
become secure again.
This ioctl has no effect when invoked for a normal guest. If this ioctl
fails for a secure guest, the guest is terminated.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20191219031445.8949-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The exception vector offset calculation was moved into a function but
the case when AIL=0 was not checked.
The reason we got away with this is that the sole caller of
ppc_excp_vector_offset checks the AIL before calling the function:
/* Handle AIL */
if (ail) {
...
vector |= ppc_excp_vector_offset(cs, ail);
}
Fixes: 2586a4d7a0 ("target/ppc: Move exception vector offset computation into a function")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20191217142512.574075-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
They were added in "16415335be Use correct input constant" with a
single use in kvm_arch_pre_run but that function's implementation was
removed by "1e8f51e856 ppc: remove idle_timer logic".
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20191218014616.686124-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However kvmppc_hint_smt_possible gets already filled
errp parameter. It doesn't change the pointer itself, only change the
internal state of referenced Error object. So we can make it Error
*const * errp, to stress the behavior. It will also help coccinelle
script (in future) to distinguish such cases from common errp usage.
While there, rename the function to
kvmppc_error_append_smt_possible_hint().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191205174635.18758-8-vsementsov@virtuozzo.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message replaced]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit cdcca22aab.
Commit cdcca22aab is a superseded version of the next commit that
crept in by accident. Revert it, so the final version applies.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The KVMState struct is opaque, so provide accessors for the fields
that will be moved from current_machine to the accelerator. For now
they just forward to the machine object, but this will change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The spr TBU40 is used to set the upper 40 bits of the timebase
register, present on POWER5+ and later processors.
This register can only be written by the hypervisor, and cannot be read.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Access Segment Descriptor Register (ASDR) provides information about
the storage element when taking a hypervisor storage interrupt. When
performing nested radix address translation, this is normally the guest
real address. This register is present on POWER9 processors and later.
Implement the ADSR, note read and write access is limited to the
hypervisor.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Utilisation of Resources Register (PURR) and Scaled
Processor Utilisation of Resources Register (SPURR) provide an estimate
of the resources used by the thread, present on POWER7 and later
processors.
Currently the [S]PURR registers simply count at the rate of the
timebase.
Preserve this behaviour but rework the implementation to store an offset
like the timebase rather than doing the calculation manually. Also allow
hypervisor write access to the register along with the currently
available read access.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes in QEMU a new CPU model for the POWER10 processor with
the same capabilities of a POWER9 process. The model will be extended
when support is completed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191205184454.10722-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PPCVirtualHypervisor is an interface instance. It should never be
dereferenced. Drop the dummy type definition for extra safety, which
is the common practice with QOM interfaces.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157589808041.21182.18121655959115011353.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This only makes sense with an emulated CPU. Don't set the bit in
CPUState::interrupt_request when using KVM to avoid confusions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157548863423.3650476.16424649423510075159.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The power7_set_irq() and power9_set_irq() functions set this but it is
never used actually. Modern Book3s compatible CPUs are only supported
by the pnv and spapr machines. They have an interrupt controller, XICS
for POWER7/8 and XIVE for POWER9, whose models don't require to track
IRQ input states at the CPU level.
Drop these lines to avoid confusion.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157548862861.3650476.16622818876928044450.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is reset, QEMU makes sure no interrupt is pending by clearing
CPUPPCstate::pending_interrupts in ppc_cpu_reset(). In the case of a
complete machine emulation, eg. a sPAPR machine, an external interrupt
request could still be pending in KVM though, eg. an IPI. It will be
eventually presented to the guest, which is supposed to acknowledge it at
the interrupt controller. If the interrupt controller is emulated in QEMU,
either XICS or XIVE, ppc_set_irq() won't deassert the external interrupt
pin in KVM since it isn't pending anymore for QEMU. When the vCPU re-enters
the guest, the interrupt request is still pending and the vCPU will try
again to acknowledge it. This causes an infinite loop and eventually hangs
the guest.
The code has been broken since the beginning. The issue wasn't hit before
because accel=kvm,kernel-irqchip=off is an awkward setup that never got
used until recently with the LC92x IBM systems (aka, Boston).
Add a ppc_irq_reset() function to do the necessary cleanup, ie. deassert
the IRQ pins of the CPU in QEMU and most importantly the external interrupt
pin for this vCPU in KVM.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157548861740.3650476.16879693165328764758.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make kvmppc_hint_smt_possible hint append helper well formed:
rename errp to errp_in, as it is IN-parameter here (which is unusual
for errp), rename function to be kvmppc_error_append_*_hint.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191127191434.20945-1-vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have to set the default model of all machine classes, not just for
the active one. Otherwise, "query-machines" will indicate the wrong
CPU model (e.g. "power9_v2.0-powerpc64-cpu" instead of
"host-powerpc64-cpu") as "default-cpu-type".
s390x already fixed this in de60a92e "s390x/kvm: Set default cpu model for
all machine classes". This patch applies a similar fix for the pseries-*
machine types on ppc64.
Doing a
{"execute":"query-machines"}
under KVM now results in
{
"hotpluggable-cpus": true,
"name": "pseries-4.2",
"numa-mem-supported": true,
"default-cpu-type": "host-powerpc64-cpu",
"is-default": true,
"cpu-max": 1024,
"deprecated": false,
"alias": "pseries"
},
{
"hotpluggable-cpus": true,
"name": "pseries-4.1",
"numa-mem-supported": true,
"default-cpu-type": "host-powerpc64-cpu",
"cpu-max": 1024,
"deprecated": false
},
...
Libvirt probes all machines via "-machine none,accel=kvm:tcg" and will
currently see the wrong CPU model under KVM.
Reported-by: Jiři Denemark <jdenemar@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In previous implementation, invocation of TCG shift function could request
shift of TCG variable by 64 bits when variable 'sh' is 0, which is not
supported in TCG (values can be shifted by 0 to 63 bits). This patch fixes
this by using two separate invocation of TCG shift functions, with maximum
shift amount of 32.
Name of variable 'shifted' is changed to 'carry' so variable naming
is similar to old helper implementation.
Variables 'avrA' and 'avrB' are replaced with variable 'avr'.
Fixes: 4e6d0920e7
Reported-by: "Paul A. Clark" <pc@us.ibm.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Aleksandar Markovic <aleksandar.markovic@rt-rk.com>
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Message-Id: <1570196639-7025-2-git-send-email-stefan.brankovic@rt-rk.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows us to remove more endian-specific defines from int_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190926204453.31837-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now that the parameters to both set_dfp64() and set_dfp128() are exactly the
same, there is no need for an explicit if() statement to determine which
function should be called based upon size. Instead we can simply use the
preprocessor to generate the call to set_dfp##size() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch over all accesses to the decimal numbers held in struct PPC_DFP from
using HI_IDX and LO_IDX to using the VsrD() macro instead. Not only does this
allow the compiler to ensure that the various dfp_* functions are being passed
a ppc_vsr_t rather than an arbitrary uint64_t pointer, but also allows the
host endian-specific HI_IDX and LO_IDX to be completely removed from
dfp_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several places in dfp_helper.c that access the decimal number
representations in struct PPC_DFP via HI_IDX and LO_IDX defines which are set
at the top of dfp_helper.c according to the host endian.
However we can instead switch to using ppc_vsr_t for decimal numbers and then
make subsequent use of the existing VsrD() macros to access the correct
element regardless of host endian. Note that 64-bit decimals are stored in the
LSB of ppc_vsr_t (equivalent to VsrD(1)).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Most of the DFP helper functions call decimal{64,128}FromNumber() just before
returning in order to convert the decNumber stored in dfp.t64 back to a
Decimal{64,128} to write back to the FP registers.
Introduce new dfp_finalize_decimal{64,128}() helper functions which both enable
the parameter list to be reduced considerably, and also help minimise the
changes required in the next patch.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr
register array" FP registers are no longer stored consecutively in memory and so
the current method of combining FP register pairs into DFP numbers is incorrect.
Firstly update the definition of the dh_*_fprp defines in helper.h to reflect
that FP registers are now stored as part of an array of ppc_vsr_t elements
rather than plain uint64_t elements, and then introduce a new ppc_fprp_t type
which conceptually represents a DFP even-odd register pair to be consumed by the
DFP helper functions.
Finally update the new DFP {get,set}_dfp{64,128}() helper functions to convert
between DFP numbers and DFP even-odd register pairs correctly, making use of the
existing VsrD() macro to access the correct elements regardless of host endian.
Fixes: ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr register array"
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing functions (now incorrectly) assume that the MSB and LSB of DFP
numbers are stored as consecutive 64-bit words in memory. Instead of accessing
the DFP numbers directly, introduce set_dfp{64,128}() helper functions to ease
the switch to the correct representation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing functions (now incorrectly) assume that the MSB and LSB of DFP
numbers are stored as consecutive 64-bit words in memory. Instead of accessing
the DFP numbers directly, introduce get_dfp{64,128}() helper functions to ease
the switch to the correct representation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER8 systems the Directed Privileged Door-bell Exception State
register (DPDES) stores doorbell pending status, one bit per a thread
of a core, set by "msgsndp" instruction. The register is shared among
threads of the same core and KVM on POWER9 emulates it in a similar way
(POWER9 does not have DPDES).
DPDES is shared but QEMU assumes all SPRs are per thread so the only safe
way to write DPDES back to VCPU before running a guest is doing so
while all threads are pulled out of the guest so DPDES cannot change.
There is only one situation when this condition is met: incoming migration
when all threads are stopped. Otherwise any QEMU HMP/QMP command causing
kvm_arch_put_registers() (for example printing registers or dumping memory)
can clobber DPDES in a race with other vcpu threads.
This changes DPDES handling so it is not written to KVM at runtime.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190923084110.34643-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are FPSCR-related defines in target/ppc/cpu.h which can be used in
place of constants and explicit shifts which arguably improve the code a
bit in places.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1568817169-1721-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsce' instruction.
'mffsce' is identical to 'mffs', except that it also clears the exception
enable bits in the FPSCR.
On CPUs without support for 'mffsce' (below ISA 3.0), the
instruction will execute identically to 'mffs'.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1568817082-1384-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffscrn' and 'mffscrni' instructions.
'mffscrn' and 'mffscrni' are similar to 'mffsl', except they do not return
the status bits (FI, FR, FPRF) and they also set the rounding mode in the
FPSCR.
On CPUs without support for 'mffscrn'/'mffscrni' (below ISA 3.0), the
instructions will execute identically to 'mffs'.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1568817081-1345-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ibm,get_system_parameter rtas call is used by the guest to retrieve
data relating to certain parameters of the system. The SPLPAR
characteristics option (token 20) is used to determine characteristics of
the environment in which the lpar will run.
It may be useful for a guest to know the number of physical host threads
present on the underlying system where it is being run. Add the
characteristic "HostThrs" to the SPLPAR Characteristics
ibm,get_system_parameter rtas call to expose this information to a
guest. Add a n_host_threads property to the processor class which is
then used to retrieve this information and define it for POWER8 and
POWER9. Other processors will default to 0 and the charateristic won't
be added.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190827045751.22123-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since I found this two instructions implemented with tcg, I refactored
them so they are consistent with other similar implementations that
I introduced in this patch.
Also, a new dual macro GEN_VXFORM_TRANS_DUAL is added. This macro is
used if one instruction is realized with direct translation, and second
one with a helper.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Message-Id: <1566898663-25858-4-git-send-email-stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The underflow and inexact exceptions are not mutually exclusive.
Check for both of them. Tidy the reset of FPSCR[FI].
Fixes: https://bugs.launchpad.net/bugs/1841442
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Paul Clarke <pc@us.ibm.com>
Message-Id: <20190826165434.18403-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As defined in Power 3.0 section 4.4.4 "Underflow Exception",
a tiny result is detected before rounding.
Fixes: https://bugs.launchpad.net/qemu/+bug/1841491
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190827020013.27154-1-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The xscvdpspn instruction implements a non-arithmetic conversion.
In particular, NaNs are not silenced and rounding is not performed.
Rewrite to match the pseudocode for ConvertDPtoSP_NS() in the
Power 3.0B manual.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566321964-1447-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[dwg: Replaced description with clearer version from rth]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A class of instructions of the form:
op Target,A,B
which operate like:
Target = Target * A + B
have a bit set which distinguishes them from instructions that operate as:
Target = Target * B + A
This bit is not being checked properly (using PPC_BIT macro), so all
instructions in this class are operating incorrectly as the second form
above. The bit was being checked as if it were part of a 64-bit
instruction opcode, rather than a proper 32-bit opcode. Fix by using the
macro (PPC_BIT32) which treats the opcode as a 32-bit quantity.
Fixes: c9f4e4d8b6 ("target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro")
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566401321-22419-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
target/ppc/mmu_helper.c: In function ‘dump_mmu’:
target/ppc/mmu_helper.c:1349:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
1349 | if (ppc64_v3_radix(env_archcpu(env))) {
| ^
target/ppc/mmu_helper.c:1356:5: note: here
1356 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Rewrite the comment using 'fall through' which is recognized by
GCC and static analyzers.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190719131425.10835-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
helper_todouble() was not properly converting any denormalized 32 bit
float to 64 bit double.
Fix-suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v2:
- Splitting patch "ppc: Three floating point fixes"; this is just one part.
- Original suggested "fix" was likely flawed. v2 is rewritten by
Richard Henderson (Thanks, Richard!); I reformatted the comments in a
couple of places, compiled, and tested.
Message-Id: <1566250936-14538-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
helper_todouble() was not properly converting INFINITY from 32 bit
float to 64 bit double.
(Normalized operand conversion is unchanged, other than indentation.)
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566242388-9244-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The POWER8 and POWER9 User's Manuals specify the implementation
behavior for what the ISA leaves "undefined" behavior for the
xscvdpspn and xscvdpsp instructions. This patch corrects the QEMU
implementation to match the hardware implementation for that case.
ISA 3.0B has xscvdpspn leaving its result in word 0 of the target register,
with the other words of the target register left "undefined".
The User's Manuals specify:
VSX scalar convert from double-precision to single-precision (xscvdpsp,
xscvdpspn).
VSR[32:63] is set to VSR[0:31].
So, words 0 and 1 both contain the result.
Note: this is important because GCC as of version 8 or so, assumes and takes
advantage of this behavior to optimize the following sequence:
xscvdpspn vs0,vs1
mffprwz r8,f0
ISA 3.0B has xscvdpspn leaving its result in word 0 of the target register,
and mffprwz expecting its input to come from word 1 of the source register.
This sequence fails with QEMU, as a shift is required between those two
instructions. However, since the hardware splats the result to both words 0
and 1 of its output register, the shift is not necessary.
Expect a future revision of the ISA to specify this behavior.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v2
- Splitting patch "ppc: Three floating point fixes"; this is just one part.
- Updated commit message to clarify behavior is documented in User's Manuals.
- Updated commit message to correct which words are in output and source of
xscvdpspn and mffprz.
- No source changes to this part of the original patch.
Message-Id: <1566236601-22954-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsl'.
'mffsl' is identical to 'mffs', except it only returns mode, status, and enable
bits from the FPSCR.
On CPUs without support for 'mffsl' (below ISA 3.0), the 'mffsl' instruction
will execute identically to 'mffs'.
Note: I renamed FPSCR_RN to FPSCR_RN0 so I could create an FPSCR_RN mask which
is both bits of the FPSCR rounding mode, as defined in the ISA.
I also fixed a typo in the definition of FPSCR_FR.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v4:
- nit: added some braces to resolve a checkpatch complaint.
v3:
- Changed tcg_gen_and_i64 to tcg_gen_andi_i64, eliminating the need for a
temporary, per review from Richard Henderson.
v2:
- I found that I copied too much of the 'mffs' implementation.
The 'Rc' condition code bits are not needed for 'mffsl'. Removed.
- I now free the (renamed) 'tmask' temporary.
- I now bail early for older ISA to the original 'mffs' implementation.
Message-Id: <1565982203-11048-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DPDES stores a status of a doorbell message and if it is lost in
migration, the destination CPU won't receive it. This does not hit us
much as IPIs complete too quick to catch a pending one and even if
we missed one, broadcasts happen often enough to wake that CPU.
This defines DPDES and registers with KVM for migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190816061733.53572-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The logic is broken for multiple vcpu guests, also causing memory leak.
The logic is in place to handle kvm not having KVM_CAP_PPC_IRQ_LEVEL,
which is part of the kernel now since 2.6.37. Instead of fixing the
leak, drop the redundant logic which is not excercised on new kernels
anymore. Exit with error on older kernels.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <156406409479.19996.7606556689856621111.stgit@lep8c.aus.stglabs.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement cpu_exec_enter/exit on ppc which calls into new methods of
the same name in PPCVirtualHypervisorClass. These are used by spapr
to implement the splpar VPA dispatch counter initially.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-2-npiggin@gmail.com>
[dwg: Removed unnecessary CONFIG_USER_ONLY checks as suggested by gkurz]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize Altivec instruction vclzw (Vector Count Leading Zeros Word).
This instruction counts the number of leading zeros of each word element
in source register and places result in the appropriate word element of
destination register.
Counting is to be performed in four iterations of for loop(one for each
word elemnt of source register vB). Every iteration consists of loading
appropriate word element from source register, counting leading zeros
with tcg_gen_clzi_i32, and saving the result in appropriate word element
of destination register.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-7-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize Altivec instruction vclzd (Vector Count Leading Zeros Doubleword).
This instruction counts the number of leading zeros of each doubleword element
in source register and places result in the appropriate doubleword element of
destination register.
Using tcg-s count leading zeros instruction two times(once for each
doubleword element of source register vB) and placing result in
appropriate doubleword element of destination register vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-6-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize altivec instruction vgbbd (Vector Gather Bits by Bytes by Doubleword)
All ith bits (i in range 1 to 8) of each byte of doubleword element in
source register are concatenated and placed into ith byte of appropriate
doubleword element in destination register.
Following solution is done for both doubleword elements of source register
in parallel, in order to reduce the number of instructions needed(that's why
arrays are used):
First, both doubleword elements of source register vB are placed in
appropriate element of array avr. Bits are gathered in 2x8 iterations(2 for
loops). In first iteration bit 1 of byte 1, bit 2 of byte 2,... bit 8 of
byte 8 are in their final spots so avr[i], i={0,1} can be and-ed with
tcg_mask. For every following iteration, both avr[i] and tcg_mask variables
have to be shifted right for 7 and 8 places, respectively, in order to get
bit 1 of byte 2, bit 2 of byte 3.. bit 7 of byte 8 in their final spots so
shifted avr values(saved in tmp) can be and-ed with new value of tcg_mask...
After first 8 iteration(first loop), all the first bits are in their final
places, all second bits but second bit from eight byte are in their places...
only 1 eight bit from eight byte is in it's place). In second loop we do all
operations symmetrically, in order to get other half of bits in their final
spots. Results for first and second doubleword elements are saved in
result[0] and result[1] respectively. In the end those results are saved in
appropriate doubleword element of destination register vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-5-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The opcode decode tables aren't really part of the CPUPPCState but an
internal implementation detail for the translator. This can cause
problems with memcpy in cpu_copy as any table created during
ppc_cpu_realize get written over causing a memory leak. To avoid this
move the tables into PowerPCCPU which is better suited to hold
internal implementation details.
Attempts to fix: https://bugs.launchpad.net/qemu/+bug/1836558
Cc: 1836558@bugs.launchpad.net
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190716121352.302-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt).
Perform shift operation (left and right respectively) on 128 bit value of
register vA by value specified in bits 125-127 of register vB. Lowest 3
bits in each byte element of register vB must be identical or result is
undefined.
For vsl instruction, the first step is bits 125-127 of register vB have
to be saved in variable sh. Then, the highest sh bits of the lower
doubleword element of register vA are saved in variable shifted,
in order not to lose those bits when shift operation is performed on
the lower doubleword element of register vA, which is the next
step. After shifting the lower doubleword element shift operation
is performed on higher doubleword element of vA, with replacement of
the lowest sh bits(that are now 0) with bits saved in shifted.
For vsr instruction, firstly, the bits 125-127 of register vB have
to be saved in variable sh. Then, the lowest sh bits of the higher
doubleword element of register vA are saved in variable shifted,
in odred not to lose those bits when the shift operation is
performed on the higher doubleword element of register vA, which is
the next step. After shifting higher doubleword element, shift operation
is performed on lower doubleword element of vA, with replacement of
highest sh bits(that are now 0) with bits saved in shifted.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Adding simple macro that is calling tcg implementation of appropriate
instruction if altivec support is active.
Optimization of altivec instruction lvsl (Load Vector for Shift Left).
Place bytes sh:sh+15 of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F
in destination register. Sh is calculated by adding 2 source registers and
getting bits 60-63 of result.
First, the bits [28-31] are placed from EA to variable sh. After that,
the bytes are created in the following way:
sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101
followed by addition of the result with 0x0001020304050607. Value obtained
is placed in higher doubleword element of vD.
(sh+8):(sh+15) by adding the result of previous multiplication with
0x08090a0b0c0d0e0f. Value obtained is placed in lower doubleword element
of vD.
Optimization of altivec instruction lvsr (Load Vector for Shift Right).
Place bytes 16-sh:31-sh of value 0x00 || 0x01 || 0x02 || ... || 0x1E ||
0x1F in destination register. Sh is calculated by adding 2 source
registers and getting bits 60-63 of result.
First, the bits [28-31] are placed from EA to variable sh. After that,
the bytes are created in the following way:
sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101
followed by substraction of the result from 0x1011121314151617. Value
obtained is placed in higher doubleword element of vD.
(sh+8):(sh+15) by substracting the result of previous multiplication from
0x18191a1b1c1d1e1f. Value obtained is placed in lower doubleword element
of vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-2-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Re-read the timebase before migrate was ported from x86 commit:
6053a86fe7: kvmclock: reduce kvmclock difference on migration
The clock move makes the guest knows about the paused time between
the stop and migrate commands. This is an issue in an already-paused
VM because some side effects, like process stalls, could happen
after migration.
So, this patch checks the runstate of guest in the pre_save handler and
do not re-reads the timebase in case of paused state (cold migration).
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Message-Id: <20190711194702.26598-1-maxiwell@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce a new GEN_VSX_HELPER_VSX_MADD macro for the generator function which
enables the source and destination registers to be decoded at translation time.
This enables the determination of a or m form to be made at translation time so
that a single helper function can now be used for both variants.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_R2_AB macro which performs the decode based
upon rA and rB at translation time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_R2 macro which performs the decode based
upon rD and rB at translation time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_R3 macro which performs the decode based
upon rD, rA and rB at translation time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_X1 macro which performs the decode based
upon xB at translation time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_X2_AB macro which performs the decode based
upon xA and xB at translation time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_X2 macro which performs the decode based
upon xT and xB at translation time.
With the previous change to the xscvqpdp generator and helper functions the
opcode parameter is no longer required in the common case and can be
removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new generator and helper function which perform the decode based
upon xT and xB at translation time.
The xscvqpdp helper is the only 2 parameter xT/xB implementation that requires
the opcode to be passed as an additional parameter, so handling this separately
allows us to optimise the conversion in the next commit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new GEN_VSX_HELPER_X3 macro which performs the decode based
upon xT, xA and xB at translation time.
With the previous changes to the VSX_CMP generator and helper macros the
opcode parameter is no longer required in the common case and can be
removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than perform the VSR register decoding within the helper itself,
introduce a new VSX_CMP macro which performs the decode based upon xT, xA
and xB at translation time.
Subsequent commits will make the same changes for other instructions however
the xvcmp* instructions are different in that they return a set of flags to be
optionally written back to the crf[6] register. Move this logic from the
helper function to the generator function, along with the float_status update.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 8a14d31b00 "target/ppc: switch fpr/vsrl registers so all VSX
registers are in host endian order" functions getVSR() and putVSR() which used
to convert the VSR registers into host endian order are no longer required.
Now that there are now no more users of getVSR()/putVSR() these functions can
be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to drop the CONFIG_KVM guard from the code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156051056289.224162.15553539098911498678.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce a KVM helper and its stub instead of guarding the code with
CONFIG_KVM.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156051055736.224162.11641594431517798715.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 8a14d31b00 "target/ppc: switch fpr/vsrl registers so all VSX
registers are in host endian order" functions getVSR() and putVSR() which used
to convert the VSR registers into host endian order are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190616123751.781-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 8a14d31b00 "target/ppc: switch fpr/vsrl registers so all VSX
registers are in host endian order" functions getVSR() and putVSR() which used
to convert the VSR registers into host endian order are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190616123751.781-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
gcc9 reports :
In file included from /usr/include/string.h:494,
from ./include/qemu/osdep.h:101,
from ./target/ppc/kvm.c:17:
In function ‘strncpy’,
inlined from ‘kvmppc_define_rtas_kernel_token’ at ./target/ppc/kvm.c:2648:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound 120 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190615081252.28602-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.
-----BEGIN PGP SIGNATURE-----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=ERgu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging
ppc patch queue 2019-06-12
Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.
# gpg: Signature made Wed 12 Jun 2019 06:47:56 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190612:
ppc/xive: Make XIVE generate the proper interrupt types
ppc/pnv: activate the "dumpdtb" option on the powernv machine
target/ppc: Use tcg_gen_gvec_bitsel
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
spapr: Don't use bus number for building DRC ids
spapr: Clean up DRC index construction
spapr: Clean up spapr_drc_populate_dt()
spapr: Clean up dt creation for PCI buses
spapr: Clean up device tree construction for PCI devices
spapr: Clean up device node name generation for PCI devices
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
spapr_pci: Improve error message
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Replace the target-specific implementation of XXSEL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190603164927.8336-1-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During the conversion these instructions were incorrectly treated as
stores. We need to use set_cpu_vsr* and not get_cpu_vsr*.
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190524065345.25591-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This introduces a set of helpers when KVM is in use, which create the
KVM XIVE device, initialize the interrupt sources at a KVM level and
connect the interrupt presenters to the vCPU.
They also handle the initialization of the TIMA and the source ESB
memory regions of the controller. These have a different type under
KVM. They are 'ram device' memory mappings, similarly to VFIO, exposed
to the guest and the associated VMAs on the host are populated
dynamically with the appropriate pages using a fault handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The gvec expanders take care of masking the shift amount
against the element width.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190518191430.21686-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We were using set_cpu_vsr*() when we should have used get_cpu_vsr*().
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509104912.6b754dff@kryten>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A few small optimisations:
In VSX_LOAD_SCALAR_DS() we can don't need to read the VSR via
get_cpu_vsrh().
Split VSX_VECTOR_LOAD_STORE() into two functions. Loads only need to
write the VSRs (set_cpu_vsr*()) and stores only need to read the VSRs
(get_cpu_vsr*())
Thanks to Mark Cave-Ayland for the suggestions.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509103545.4a7fa71a@kryten>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxspltib raises a VMX or a VSX exception depending on the register
set it is operating on. We had a check, but it was backwards.
Fixes: f113283525 ("target-ppc: add xxspltib instruction")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509061713.69490488@kryten>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A recent cleanup changed the pre zeroing of the result from 64 bit
to 32 bit operations:
- result.u64[i] = 0;
+ result.VsrW(i) = 0;
This corrupts the result.
Fixes: 60594fea29 ("target/ppc: remove various HOST_WORDS_BIGENDIAN hacks in int_helper.c")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-9-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vslv and vsrv are broken on little endian, we append 00 to the
high byte not the low byte. Fix it by using the VsrB() accessor.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-6-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix a typo in xxbrq and xxbrw where we put both results into the lower
doubleword.
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-3-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix a typo in xvxsigdp where we put both results into the lower
doubleword.
Fixes: dd977e4f45 ("target/ppc: Optimize x[sv]xsigdp using deposit_i64()")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-1-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Message-Id: <20190430172842.27369-1-liboxuan@connect.hku.hk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We now have an interface for guest visible random numbers.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generating a random number counts as I/O, as it cannot be
replayed and produce the same results.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190423102145.14812-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-ppc@nongnu.org
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here's the first ppc target pull request for qemu-4.1. This has a
number of things that have accumulated while qemu-4.0 was frozen.
* A number of emulated MMU improvements from Ben Herrenschmidt
* Assorted cleanups fro Greg Kurz
* A large set of mostly mechanical cleanups from me to make target/ppc
much closer to compliant with the modern coding style
* Support for passthrough of NVIDIA GPUs using NVLink2
As well as some other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=RpAK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' into staging
ppc patch queue 2019-04-26
Here's the first ppc target pull request for qemu-4.1. This has a
number of things that have accumulated while qemu-4.0 was frozen.
* A number of emulated MMU improvements from Ben Herrenschmidt
* Assorted cleanups fro Greg Kurz
* A large set of mostly mechanical cleanups from me to make target/ppc
much closer to compliant with the modern coding style
* Support for passthrough of NVIDIA GPUs using NVLink2
As well as some other assorted fixes.
# gpg: Signature made Fri 26 Apr 2019 07:02:19 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190426: (36 commits)
target/ppc: improve performance of large BAT invalidations
ppc/hash32: Rework R and C bit updates
ppc/hash64: Rework R and C bit updates
ppc/spapr: Use proper HPTE accessors for H_READ
target/ppc: Don't check UPRT in radix mode when in HV real mode
target/ppc/kvm: Convert DPRINTF to traces
target/ppc/trace-events: Fix trivial typo
spapr: Drop duplicate PCI swizzle code
spapr_pci: Get rid of duplicate code for node name creation
target/ppc: Style fixes for translate/spe-impl.inc.c
target/ppc: Style fixes for translate/vmx-impl.inc.c
target/ppc: Style fixes for translate/vsx-impl.inc.c
target/ppc: Style fixes for translate/fp-impl.inc.c
target/ppc: Style fixes for translate.c
target/ppc: Style fixes for translate_init.inc.c
target/ppc: Style fixes for monitor.c
target/ppc: Style fixes for mmu_helper.c
target/ppc: Style fixes for mmu-hash64.[ch]
target/ppc: Style fixes for mmu-hash32.[ch]
target/ppc: Style fixes for misc_helper.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Performing a complete flush is ~ 100 times faster than flushing
256MiB of 4KiB pages. Set a limit of 1024 pages and perform a complete
flush afterwards.
This patch significantly speeds up AIX 5.1 and NetBSD-ofppc.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <1555103178-21894-4-git-send-email-atar4qemu@gmail.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With MT-TCG, we are now running translation in a racy way, thus
we need to mimic hardware when it comes to updating the R and
C bits, by doing byte stores.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190411080004.8690-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With MT-TCG, we are now running translation in a racy way, thus
we need to mimic hardware when it comes to updating the R and
C bits, by doing byte stores.
The current "store_hpte" abstraction is ill suited for this, we
replace it with two separate callbacks for setting R and C.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190411080004.8690-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It appears that during kexec, we run for a while in hypervisor
real mode with LPCR:HR set and LPCR:UPRT clear, which trips
the assertion in ppc_radix64_handle_mmu_fault().
First this shouldn't be an assertion, it's a guest error.
Then we shouldn't be checking these things in hypervisor real
mode (or in virtual hypervisor guest real mode which is similar)
as the real HW won't use those LPCR bits in those cases anyway,
so technically it's ok to have this discrepancy.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190411080004.8690-2-clg@kaod.org>
[dwg: Fix for 32-bit builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155445152490.302073.17033451726459859333.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155445151931.302073.18436485925081597460.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it,
properly rename find_max_supported_pagesize() to
find_min_backend_pagesize().
s390x is actually interested into the maximum ram pagesize, so
introduce and use qemu_maxrampagesize().
Add a TODO, indicating that looking at any mapped memory backends is not
100% correct in some cases.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-3-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit dc99065b5f (v0.1.0) added dis-asm.h from binutils.
Commit 43d4145a98 (v0.1.5) inlined bfd.h into dis-asm.h to remove the
dependency on binutils.
Commit 76cad71136 (v1.4.0) moved dis-asm.h to include/disas/bfd.h.
The new name is confusing when you try to match against (pre GPLv3+)
binutils. Rename it back. Keep it in the same directory, of course.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.
Its only caller hmp_info_cpustats() (via cpu_dump_statistics()) passes
monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-13-armbru@redhat.com>
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I've been hitting several QEMU crashes while running a fedora29 ppc64le
guest under TCG. Each time, this would occur several minutes after the
guest reached login:
Fedora 29 (Twenty Nine)
Kernel 4.20.6-200.fc29.ppc64le on an ppc64le (hvc0)
Web console: https://localhost:9090/
localhost login:
tcg/tcg.c:3211: tcg fatal error
This happens because a bug crept up in the gen_stxsdx() helper when it
was converted to use VSR register accessors by commit 8b3b2d75c7
"target/ppc: introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers
for VSR register access".
The code creates a temporary, passes it directly to gen_qemu_st64_i64()
and then to set_cpu_vrsh()... which looks like this was mistakenly
coded as a load instead of a store.
Reverse the logic: read the VSR to the temporary first and then store
it to memory.
Fixes: 8b3b2d75c7
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155371035249.2038502.12364252604337688538.stgit@bahia.lan>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
