The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need the CCW address on the libvirt side to correctly identify
the disk, so add this information to the GuestDiskAddress on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20201127082353.448251-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change
Parameter 'mode' expects halt|powerdown|reboot
to
Parameter 'mode' expects 'halt', 'powerdown', or 'reboot'
for consistency with similar error messages elsewhere.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-9-armbru@redhat.com>
check_suspend_mode()'s error message
Parameter 'mode' expects GuestSuspendMode
makes no sense to users: GuestSuspendMode is a C enum. Fortunately,
it is unreachable. Replace it by abort().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-8-armbru@redhat.com>
The QGA MSI target requires several macros which are only available
without --disable-guest-agent-msi.
Don't define that target if configure was called with --disable-guest-agent-msi.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117201834.408892-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recently-added 'guest-get-disk' command returns a list of
GuestDiskInfo entries, which in turn have a 'dependents' field which
lists devices these entries are dependent upon. Thus, 'dependencies'
is a better name for this field. Address this by renaming the field
accordingly.
Additionally, 'dependents' is specified as non-optional, even though
it's not implemented for w32. This is misleading, since it gives users
the impression that a particular disk might not have dependencies,
when in reality that information is simply not known to the guest
agent. Address this by making 'dependents' an optional field, and only
marking it as in-use when the facilities to obtain this information are
available to the guest agent.
Cc: Eric Blake <eblake@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
We opendir("/sys/block") at the beginning of the function, but we never
close it prior to returning.
Fixes: Coverity CID 1436130
Fixes: fed3956429 ("qga: add implementation of guest-get-disks for Linux")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix-up merge conflicts due to qga-ssh-test being disabled in earlier
patch due to G_TEST_OPTION_ISOLATE_DIRS triggering build-oss-fuzz
leak detector.
*fix up style and disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
I prefer 'reset' over 'clear', since 'clear' and keys may have some
other relations or meaning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add new commands to add and remove SSH public keys from
~/.ssh/authorized_keys.
I took a different approach for testing, including the unit tests right
with the code. I wanted to overwrite the function to get the user
details, I couldn't easily do that over QMP. Furthermore, I prefer
having unit tests very close to the code, and unit files that are domain
specific (commands-posix is too crowded already). FWIW, that
coding/testing style is Rust-style (where tests can or should even be
part of the documentation!).
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1885332
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*squashed in fix-ups for setting file ownership and use of QAPI
conditionals for CONFIG_POSIX instead of stub definitions
*disable qga-ssh-test for now due to G_TEST_OPTION_ISOLATE_DIRS
triggering leak detector in build-oss-fuzz
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all the physical disk drives. Unlike for Linux
partitions and virtual volumes are not listed.
Example output:
{
"return": [
{
"name": "\\\\.\\PhysicalDrive0",
"partition": false,
"address": {
"serial": "QM00001",
"bus-type": "sata",
...
},
"dependents": []
}
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all disks (real and virtual) as well as disk
partitions. For each disk the list of dependent disks is also listed and
/dev path is used as a handle so it can be matched with "name" field of
other returned disk entries. For disk partitions the "dependents" list
is populated with the the parent device for easier tracking of
hierarchy.
Example output:
{
"return": [
...
{
"name": "/dev/dm-0",
"partition": false,
"dependents": [
"/dev/sda2"
],
"alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
},
{
"name": "/dev/sda2",
"partition": true,
"dependents": [
"/dev/sda"
]
},
{
"name": "/dev/sda",
"partition": false,
"address": {
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
"bus-type": "sata",
...
"dev": "/dev/sda",
"target": 0
},
"dependents": []
},
...
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*add missing stub for !defined(CONFIG_FSFREEZE)
*remove unused deps_dir variable
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks
and partitions but it is limited only to mounted disks with filesystem.
This new command should allow listing information about disks of the VM
regardles whether they are mounted or not. This can be usefull for
management applications for mapping virtualized devices or pass-through
devices to device names in the guest OS.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They should be avoided
in new code.
GuestDeviceId was recently added for guest-get-devices. Convert it to
a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_guest_get_devices() is wrong that way: it calls error_setg() in a
loop.
If no iteration fails, the function returns a value and sets no error.
Okay.
If exactly one iteration fails, the function returns a value and sets
an error. Wrong.
If multiple iterations fail, the function trips error_setv()'s
assertion.
Fix it to return immediately on error.
Perhaps the failure to convert the driver version to UTF-8 should not
be an error. We could simply not report the botched version string
instead.
Drop a superfluous continue while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
guest-get-devices returns 'driver-date' as string in the format
YYYY-MM-DD. Goes back to recent commit 2e4211cee4 "qga: add command
guest-get-devices for reporting VirtIO devices".
We should avoid use of multiple encodings for the same kind of data.
Especially string encodings. Change it to return nanoseconds since
the epoch, like guest-get-time does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Member 'address' is union GuestDeviceAddress with a single branch
GuestDeviceAddressPCI, containing PCI vendor ID and device ID. This
is not a PCI address. Type GuestPCIAddress is. Messed up in recent
commit 2e4211cee4 "qga: add command guest-get-devices for reporting
VirtIO devices".
Rename type GuestDeviceAddressPCI to GuestDeviceIdPCI, type
GuestDeviceAddress to GuestDeviceId, and member 'address' to 'id'.
Document the member properly while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The environment variables can't be passed through an env: argument
yet (meson#2723), use 'env' as suggested in:
https://github.com/mesonbuild/meson/issues/2723#issuecomment-348630957
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add some section headings to the QGA json; this is purely so that we
have some H1 headings, as otherwise each command ends up being
visible in the interop/ manual's table of contents. In an ideal
world there might be a proper 'Introduction' section the way there is
in qapi/qapi-schema.json.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-12-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-ga-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-ga-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
As the GA ref is now part of the Sphinx 'interop' manual,
we can delete the direct link from index.html.in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-9-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
-----BEGIN PGP SIGNATURE-----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=ErBp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-09-16' into staging
* Fix "readlink -f" problem in iotests on macOS (to fix the Cirrus-CI tests)
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
# gpg: Signature made Wed 16 Sep 2020 12:24:29 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-09-16: (24 commits)
cirrus: Building freebsd in a single shot
ci: Enable msys2 ci in cirrus
tests: Fixes test-qdev-global-props.c
tests: fix test-util-sockets.c
tests: Fixes test-io-channel-file by mask only owner file state mask bits
tests: fixes aio-win32 about aio_remove_fd_handler, get it consistence with aio-posix.c
tests: Fixes test-io-channel-socket.c tests under msys2/mingw
vmstate: Fixes test-vmstate.c on msys2/mingw
meson: remove empty else and duplicated gio deps
meson: Use -b to ignore CR vs. CR-LF issues on Windows
osdep: file locking functions are not available on Win32
tests: test-replication disable /replication/secondary/* on msys2/mingw.
tests: Fixes test-replication.c on msys2/mingw.
meson: disable crypto tests are empty under win32
meson: Disable test-char on msys2/mingw for fixing tests stuck
rcu: fixes test-logging.c by call drain_call_rcu before rmdir_full
tests: Convert g_free to g_autofree macro in test-logging.c
rcu: Implement drain_call_rcu
qga/commands-win32: Fix problem with redundant protype declaration
Simplify the .gitignore file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When compiling QEMU with MSYS2 on Windows, there is currently the
following error:
../qga/commands-win32.c:62:24: error: redundant redeclaration of
'CM_Get_DevNode_PropertyW' [-Werror=redundant-decls]
62 | CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../qga/commands-win32.c:26:
C:/tools/msys64/mingw64/x86_64-w64-mingw32/include/cfgmgr32.h:840:26: note:
previous declaration of 'CM_Get_DevNode_PropertyW' was here
840 | CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(DEVINST dnDevInst,
const DEVPROPKEY *PropertyKey, DEVPROPTYPE *PropertyType, PBYTE PropertyBuffer,
PULONG PropertyBufferSize, ULONG ulFlags);
Seems like this protype is sometimes available in the cfgmgr32.h
header, and sometimes not. Let's silence the compiler warning here
to let the build pass with -Werror, too.
Message-Id: <20200915114757.55635-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add command for reporting devices on Windows guest. The intent is not so
much to report the devices but more importantly the driver (and its
version) that is assigned to the device. This gives caller the
information whether VirtIO drivers are installed and/or whether
inadequate driver is used on a device (e.g. QXL device with base VGA
driver).
Example:
[
{
"driver-date": "2019-08-12",
"driver-name": "Red Hat VirtIO SCSI controller",
"driver-version": "100.80.104.17300",
"address": {
"type": "pci",
"data": {
"device-id": 4162,
"vendor-id": 6900
}
}
},
...
]
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
*remove redundant glib autoptr declaration for GuestDeviceInfo
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU on s390x uses virtio via channel I/O instead of PCI by default.
Add a function to detect and provide information for virtio-scsi and
virtio-block devices here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The libudev-related code is independent from the other pci-related code
and can be re-used for non-pci devices (like ccw devices on s390x). Thus
move this part to the generic function.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1755075
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We are going to support non-PCI devices soon. For this we need to split
the generic GuestDiskAddress and GuestDiskAddressList memory allocation
and list chaining into a separate function first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The various schemas included in QEMU use a JSON-based format which
is, however, strictly speaking not valid JSON.
As a consequence, when vim tries to apply syntax highlight rules
for JSON (as guessed from the file name), the result is an unreadable
mess which mostly consist of red markers pointing out supposed errors
in, well, pretty much everything.
Using Python syntax highlighting produces much better results, and
in fact these files already start with specially-formatted comments
that instruct Emacs to process them as if they were Python files.
This commit adds the equivalent special comments for vim.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20200729185024.121766-1-abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The "guest-get-fsinfo" could also be used for non-PCI devices in the
future. And the code in GuestPCIAddress() in qga/commands-win32.c seems
to be using "-1" for fields that it can not determine already. Thus
let's properly document "-1" as value for invalid PCI address fields.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch handles the case where unmounted volumes exist,
where in that case GetVolumePathNamesForVolumeName returns
empty path, GetVolumeInformation will use the current working
directory instead.
This patch fixes the issue by opening a handle to the volumes,
and using GetVolumeInformationByHandleW instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1746667
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
*fix crash when guest_build_fsinfo() sets errp multiple times
*make new error message more distinct from existing ones
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Problem with g_get_host_name() is that on the first call it saves
the hostname into a global variable and from then on, every
subsequent call returns the saved hostname. Even if the hostname
changes. This doesn't play nicely with guest agent, because if
the hostname is acquired before the guest is set up (e.g. on the
first boot, or before DHCP) we will report old, invalid hostname.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1845127
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since commit 781f2b3d1e ("qga: process_event() simplification"),
send_response() is called unconditionally, but will assert when "rsp" is
NULL. This may happen with QCO_NO_SUCCESS_RESP commands, such as
"guest-shutdown".
Fixes: 781f2b3d1e
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On one hand "guest-fsfreeze-freeze" command, "COM+ System Application service" is
stopped, on the other hand "guest-fsfreeze-thaw" stops QGA VSS Provider service from
"COM+ Application Admin Catalog".
Invoking a series of freeze and thaw commands may result in QGA failing to stop
VSS Provider service as "COM+ System Application service" is stopped, which can
cause some delay in qga response.
In this commit StopService function was changed and VSS Provider service is now
stopped using Winsvc library API.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1549425
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
transfer_memory_block() leaks an Error object when reading file
/sys/devices/system/memory/memory<INDEX>/state fails with errno other
than ENOENT, and @sys2memblk is false, i.e. when the state file exists
but cannot be read (seems quite unlikely), and this is
guest-set-memory-blocks, not guest-get-memory-blocks.
Plug the leak.
Fixes: bd240fca42
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200630090351.1247703-9-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
qmp_guest_suspend_disk() and qmp_guest_suspend_ram() pass @local_err
first to check_suspend_mode(), then to acquire_privilege(), then to
execute_async(). Continuing after errors here can only end in tears.
For instance, we risk tripping error_setv()'s assertion.
Fixes: aa59637ea1
Fixes: f54603b6aa
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_guest_get_memory_blocks() passes &local_err to
transfer_memory_block() in a loop. If this fails in more than one
iteration, it can trip error_setv()'s assertion.
Fix it to break the loop.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
On [*] Daniel Berrangé commented:
The QEMU guest agent protocol is not sensible way to access huge
files inside the guest. It requires the inefficient process of
reading the entire data into memory than duplicating it again in
base64 format, and then copying it again in the JSON serializer /
monitor code.
For arbitrary general purpose file access, especially for large
files, use a real file transfer program or use a network block
device, not the QEMU guest agent.
To avoid bug reports as BZ#1594054 (CVE-2018-12617), follow his
suggestion to put a low, hard limit on "count" in the guest agent
QAPI schema, and don't allow count to be larger than 48 MB.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg693176.html
Fixes: CVE-2018-12617
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1594054
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*update schema documentation to indicate 48MB limit instead of 10MB
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Extract the common code shared by both POSIX/Win32 implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As we are going to reuse this method, declare it in common
header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As noted by Daniel Berrangé in [*], the fix from commit 807e2b6fce
which replaced malloc() by try_malloc() is not enough, the process
can still run out of memory a few line later:
346 buf = g_try_malloc0(count + 1);
347 if (!buf) {
348 error_setg(errp,
349 "failed to allocate sufficient memory "
350 "to complete the requested service");
351 return NULL;
352 }
353 is_ok = ReadFile(fh, buf, count, &read_count, NULL);
354 if (!is_ok) {
355 error_setg_win32(errp, GetLastError(), "failed to read file");
356 slog("guest-file-read failed, handle %" PRId64, handle);
357 } else {
358 buf[read_count] = 0;
359 read_data = g_new0(GuestFileRead, 1);
^^^^^^
Instead we are going to put a low hard limit on 'count' in the next
commits. This reverts commit 807e2b6fce.
[*] https://lists.gnu.org/archive/html/qemu-devel/2018-06/msg03471.html
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
local_err is used several times in guest_suspend(). Setting non-NULL
local_err will crash, so let's zero it after freeing. Also fix possible
leak of local_err in final if().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-7-vsementsov@virtuozzo.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Although qemu-ga has supported vsock since 2016 it was not documented on
the man page.
Also add the socket address representation to the qga --help output.
Fixes: 586ef5dee7
("qga: add vsock-listen method")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The QAPI struct GuestFileWhence has a comment about how we are
exploiting equivalent values between two different integer types
shared in a union. But C says behavior is undefined on assignments to
overlapping storage when the two types are not the same width, and
indeed, 'int64_t value' and 'enum QGASeek name' are very likely to be
different in width. Utilize a temporary variable to fix things.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 0b4b49387
Fixes: Coverity CID 1421990
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
guest-file-read command is currently implemented to read from a
file handle count number of bytes. when executed with a very large count number
qemu-ga crashes.
after some digging turns out that qemu-ga crashes after trying to allocate
a buffer large enough to save the data read in it, the buffer was allocated using
g_malloc0 which is not fail safe, and results a crash in case of failure.
g_malloc0 was replaced with g_try_malloc0() which returns NULL on failure,
A check was added for that case in order to prevent qemu-ga from crashing
and to send a response to the qemu-ga client accordingly.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1594054
Signed-off-by: Basil Salman <basil@daynix.com>
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch handles the case where VSS Provider is already registered,
where in such case qga uninstalls the provider and registers it again.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Installation might fail if we don't wait for the provider
unregisteration process to finish.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The string returned by g_win32_error_message() has to be
deallocated with g_free().
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200228100726.8414-5-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use error_setg_win32() which adds a hint similar to strerror(errno)).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200228100726.8414-4-philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to switch the doc comments to rST format, and rST
requires a blank line before the start of a bulleted or enumerated
list. Two places in qapi-schema.json were missing this blank line.
Some places were using an indented line as a sort of single-item
bulleted list, which in the Texinfo output comes out all run
onto a single line; use a real bulleted list instead.
Some places unnecessarily indented lists, which confuses rST.
guest-fstrim:minimum's documentation was indented the
right amount to share a line with @minimum, but wasn't
actually doing so.
The indent on the bulleted list in the guest-set-vcpus
Returns section meant rST misindented it.
Changes to the generated Texinfo are very minor (the new
bulleted lists, and a few extra blank lines).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-7-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-6-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The doc comment for GuestDiskBusType doesn't match up with the
enumeration because of a missing hyphen in 'file-backed-virtual'.
This means the docs are rendered wrongly:
"virtual"
Win virtual bus type "file-backed" virtual: Win file-backed bus type
"file-backed-virtual"
Not documented
Add the missing hyphen.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-5-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-13-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
build_guest_fsinfo_for_virtual_device() dereferences @errp when
build_guest_fsinfo_for_device() fails. That's wrong; see the big
comment in error.h. Introduced in commit 46d4c5723e "qga: Add
guest-get-fsinfo command".
No caller actually passes null.
Fix anyway: splice in a local Error *err, and error_propagate().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The Posix implementation of guest-set-time invokes hwclock to
set/retrieve the time to/from the hardware clock. If hwclock
is not available, the user is currently informed that "hwclock
failed to set hardware clock to system time", which is quite
misleading. This may happen e.g. on s390x, which has a different
timekeeping concept anyway.
Let's check for the availability of the hwclock command and
return QERR_UNSUPPORTED for guest-set-time if it is not available.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191205115350.18713-1-cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Memory block commands are only supported for linux with sysfs,
"guest-get-memory-block-info" was not in blacklist for other
cases.
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1751431
Signed-off-by: Basil Salman <bsalman@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Network interface name is fetched as an encoded WCHAR array, (wide
character), then it is decoded using the guest's CP_ACP Windows code
page, which is the default code page as configure in the guest's
Windows, then it is returned as a byte array, (char array).
As stated in the BZ#1733165, when renaming a network interface to a
Chinese name and invoking this command, the returned name field has
the (\ufffd) value for each Chinese character the name had, this
value is an indication that the code page does not have the decoding
information for the given character.
This bug is a result of using the CP_ACP code page for decoding which
is an interchangeable code page, instead CP_UTF8 code page should be
used for decoding the network interface's name.
https://bugzilla.redhat.com/show_bug.cgi?id=1733165
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Current parameter was always one. We continue with that value for now
in all callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
---
Moved trace to socket_listen
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
The win2qemu[] is supposed to be the conversion table to convert between
STORAGE_BUS_TYPE in Windows SDK and GuestDiskBusType in qga.
But it was incorrectly written that it forces to set a GuestDiskBusType
value to STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003650.10137-1-driver1998@foxmail.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify the code around qmp_dispatch():
- rely on qmp_dispatch/check_obj() for message checking
- have a single send_response() point
- constify send_response() argument
It changes a couple of error messages:
* When @req isn't a dictionary, from
Invalid JSON syntax
to
QMP input must be a JSON object
* When @req lacks member "execute", from
this feature or command is not currently supported
to
QMP input lacks member 'execute'
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The Windows QEMU guest agent erroneously tries to collect PCI information
directly from the physical drive. However, windows stores SCSI/IDE information
with the drive and PCI information with the underlying storage controller
This changes get_pci_info to use the physical drive's underlying storage
controller to get PCI information.
* Additionally Fixes incorrect size being passed to DeviceIoControl
when getting volume extents. Can occasionally crash the guest agent
Signed-off-by: Matt Hines <mhines@scalecomputing.com>
*fix up some checkpatch warnings
*fix domain reporting and add some sanity checks for debug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 7be41675f7 set -std=gnu99 for C code via QEMU_CFLAGS. Currently
we generate a "custom" QEMU_CXXFLAGS for VSS DLL C++ build by
filtering out some options from QEMU_CFLAGS and adding some others.
Since we don't filter out -std=gnu99 currently this breaks builds when
VSS support is enabled.
We could keep the existing approach, filter out -std=gnu99 from
QEMU_CFLAGS, and add -std=gnu++98, like configure currently does for
QEMU_CXXFLAGS, but as it turns out our resulting QEMU_CXXFLAGS would
be exactly what configure already generates, just with these filtered
out:
-fstack-protector-all -fstack-protector-strong
and these added:
-Wno-unknown-pragmas -Wno-delete-non-virtual-dtor
So fix the issue by re-using configure-generated QEMU_CXXFLAGS and
just handling these specific changes.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 3ebee3b191 defined assert() as g_assert(), but when we build
the VSS DLL component of QGA (to handle fsfreeze) we do not include
glib, which results in breakage when building with VSS support enabled.
Fix this by including glib (along with the -lintl and -lws2_32
dependencies it brings).
Since the VSS DLL is built statically, this introduces an additional
dependency on static glib and supporting libs for the mingw environment
(possibly why we didn't include glib originally), but VSS support
already has very specific prerequisites so it shouldn't affect too many
build environments.
Since the VSS DLL code does use qemu/osdep.h, this should also help
avoid future breakages and possibly allow for some clean ups in current
VSS code.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since Windows Server 2016, Microsoft stopped upgrading the major and minor
versions of their new Windows Server product, so, the current functionality
of checking major and minor version numbers to determine the Windows Server
version wont work as expected.
The implemented solution here is to use the build number in addition to the
major and minor version numbers of the product to determine the Windows
Server product version.
The final build number of Windows Server 2016 is 14939, and
the final build number of Windows Server 2019 is 17764, so any Windows
Server product that has the major version of 10 and minor version of 0
with a build number lower or equal to 14939 will resemble 2016 and if the
build number is lower or equal to 17763 will resemble 2019.
Reference:
https://techcommunity.microsoft.com/t5/Windows-Server-Insiders/Windows-Server-2019-version-info/m-p/293112/highlight/true#M859
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Building QGA for XP seems possible so far: the dependency on
libqemuutil.a implies building qemu-thread-win32.c, which requires
Vista API since commit 12f8def0 (v2.9). But qemu-thread isn't being
used in QGA, the resulting binary may still work on XP. XP is no
longer supported for the past 4.5y, it's time to drop support for it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.
This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates the descriptions of 'guest-suspend-ram' and
'guest-suspend-hybrid' to mention that both commands relies now
on the proper support for wake up from suspend, retrieved by the
'wakeup-suspend-support' attribute of the 'query-current-machine'
QMP command.
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20181205194701.17836-3-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The guest-agent-core.h header was missing the usual guards
against multiple inclusion; add them.
(Spotted by lgtm.com's static analyzer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduced in commit b1ba8890e6, vol_h
handle should be closed, and "out" cleanup should be done after
DeviceIoControl() fails.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently whenever the qemu-ga's service doesn't find the virtio-serial
the run_agent() loops in a QGA_RETRY_INTERVAL (default 5 seconds)
intervals and try to restart the qemu-ga which causes a synchronous loop.
Changed to wait and listen for the serial events by registering for
notifications a proper serial event handler that deals with events:
DBT_DEVICEARRIVAL indicates that the device has been inserted and
is available
DBT_DEVICEREMOVECOMPLETE indicates that the devive has been removed
Which allow us to determine when the channel path is available for the
qemu-ga to restart.
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Useful in general, but especially now that errors might occur more
frequently with --retry-path set.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's nicer from a management perspective that the agent can survive
hotplug/unplug of the channel device, or be started prior to the
installation of the channel device's driver without and still be able
to resume normal function afterward. On linux there are alternatives
like systemd to support this, but on w32 --retry-path is the only
option so it makes sense to set it by default when installed as a
w32 service.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This adds an option to instruct the agent to periodically attempt
re-opening the communication channel after a channel error has
occurred. The main use-case for this is providing an OS-independent
way of allowing the agent to survive situations like hotplug/unplug of
the communication channel, or initial guest set up where the agent may
be installed/started prior to the installation of the channel device's
driver.
There are nicer ways of implementing this functionality via things
like systemd services, but this option is useful for platforms like
*BSD/w32.
Currently a channel error will result in the GSource for that channel
being removed from the GMainLoop, but the main loop continuing to run.
That behavior results in a dead loop when --retry-path isn't set, and
prevents us from knowing when to attempt re-opening the channel when
it is set, so we also force the loop to exit as part of this patch.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eventually we want a w32 service to be able to restart the qga main
loop from within service_main(). To allow for this we move service
handling out of run_agent() such that service_main() calls
run_agent() instead of the reverse.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For w32 services we rely on the global GAState to access resources
associated with the agent within service_main(). Currently this is
sufficient for starting the agent since we open the channel once prior
to calling service_main(), and simply start the GMainLoop to start the
agent from within service_main().
Eventually we want to be able to also [re-]open the communication
channel from within service_main(), which requires access to
config/socket_activation variables, so we hang them off GAState in
preparation for that.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
*dont move GAConfig struct, just the typedef
*fix build bisect for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch better separates the init/cleanup routines out into
separate functions to make the start-up procedure a bit easier to
follow. This will be useful when we eventually break out the actual
start/stop of the agent's main loop into separates routines that
can be called multiple times after the init phase.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It was not obvious what exactly the cryptic string copying does to the
GUID. This change makes the intent clearer.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Report device UNC of the disk. It is reported as "\\.\PhysicalDriveX".
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Probe the volume for disk extents and return list of all disks.
Originally only first disk of composite volume was returned.
Note that the patch changes get_pci_info() from one state of brokenness
into a different state of brokenness. In other words it still does not do
what it's supposed to do (see comment in code). If anyone knows how to
fix it, please step in.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Refactor building of disk info into a function that builds the list and
a function that returns infor for single disk. This will be used in
future commit that will handle multi-disk volumes.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*coding style fix-ups (declarations at beginning of block)
*improve readability for user-visible errors
*cover additional edge-cases with debug statements
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Refactor code that queries bus type to be more generic. The function
get_disk_bus_type() has been renamed to build_guest_disk_info().
Following commit(s) will extend this function.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The windows code generaly lacks debug information (compared to posix
code). This patch adds some related to HW info in guest-get-fsinfo
command.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The call to SetupDiGetDeviceRegistryProperty might fail because the
value doesn't exist in the registry, in this case we shouldn't exit from
the loop but instead continue to look for other available values in the
registry and set this value as unavailable (-1).
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
*squash in fix for when get_pci_info() returns NULL pci_controller field
*fix handling for error_set() cases in get_pci_info(), not just NULL return
*force all -1 PCI addr fields if any single one of them isn't found
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The fsinfo command is currently implemented for Windows only and it's disk
parameter can be enabled by adding the define "CONFIG_QGA_NTDDSCSI" to the qga
code. When enabled and executed the qemu-ga crashed with the following message:
------------------------------------------------
File qapi/qapi-visit-core.c, Line 49
Expression: !(v->type & VISITOR_OUTPUT) || *obj)
------------------------------------------------
After some digging, turns out that the GuestPCIAddress is null and the
qapi visitor doesn't like that, so we can always allocate it instead and
initiate all it's members to -1.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Report device node of the disk on Linux (e.g. "/dev/sda2").
Requirs libudev.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add reporting of disk serial number on Linux guests. The feature depends
on libudev.
Example:
{
"name": "dm-2",
"mountpoint": "/",
...
"disk": [
{
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
...
}
],
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If VM has VCPUs plugged sparselly (for example a VM started with
3 VCPUs (cpu0, cpu1 and cpu2) and then cpu1 was hotunplugged so
only cpu0 and cpu2 are present), QGA will rise a error
error: internal error: unable to execute QEMU agent command 'guest-get-vcpus':
open("/sys/devices/system/cpu/cpu1/"): No such file or directory
when
virsh vcpucount FOO --guest
is executed.
Fix it by ignoring non present CPUs when fetching CPUs status from sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch add support for freeze specified fs.
The valid mountpoints list member are [1]:
The path of a mounted folder, for example, Y:\MountX\
A drive letter, for example, D:\
A volume GUID path of the form \\?\Volume{GUID}\,
where GUID identifies the volume
A UNC path that specifies a remote file share,
for example, \\Clusterx\Share1\
[1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, the win32 port of QEMU Guest Agent does not properly handle Unicode
paths. The JSON decoder produces a valid UTF-8 path string, but this is passed
directly to CreateFileA, which is expecting an ANSI string and not UTF-8. This
leads to mangled filenames.
This patch follows the example of qmp_guest_set_user_password() and uses
g_utf8_to_utf16() to convert the string to UTF-16 and calls CreateFileW()
explicitly.
Signed-off-by: Jonathon Reinhart <jreinhart@cc-sw.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.
When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The defrag.exe tool which is used for executing the fstrim command
on Windows doesn't support retrim for OSes lower than Win8. This
commit handles this case and returns a suitable error.
Output of fstrim before this commit:
{"execute":"guest-fstrim"}
{"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option
was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command
line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An
invalid command line option was specified. (0x89000008)"}]}}
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1594113
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
* use alternative version query code proposed by Sameeh
* fix up version check logic
* avoid CamelCase variable names when possible
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The file descriptor for /sys/power/state was never closed. Reported
by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'driver' is leaked when the loop is not broken.
Leak introduced by commit 743c71d03c,
spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
bios_support_mode verifies if the guest has support for a certain
suspend mode but it doesn't inform back which suspend tool
provides it. The caller, guest_suspend, executes all suspend
strategies in order again.
After adding systemd suspend support, bios_support_mode now will
verify for support for systemd, then pmutils, then Linux sys state
file. In a worst case scenario where both systemd and pmutils isn't
supported but Linux sys state is:
- bios_supports_mode will check for systemd, then pmutils, then
Linux sys state. It will tell guest_suspend that there is support,
but it will not tell who provides it;
- guest_suspend will try to execute (and fail) systemd suspend,
then pmutils suspend, to only then use the Linux sys suspend.
The time spent executing systemd and pmutils suspend was wasted
and could be avoided, but only bios_support_mode knew it but
didn't inform it back.
A quicker approach is to nuke bios_supports_mode and control
whether we found support at all with a bool flag inside
guest_suspend. guest_suspend will search for suspend support
and execute it as soon as possible. If the a given suspend
mechanism fails, continue to the next. If no suspend
support is found, the "not supported" message is still being
sent back to the user.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
pmutils isn't being supported by newer OSes like Fedora 27
or Mint. This means that the only suspend option QGA offers
for these guests are writing directly into the Linux sys state
file. This also means that QGA also loses the ability to do
hybrid suspend in those guests - this suspend mode is only
available when using pmutils.
Newer guests can use systemd facilities to do all the suspend
types QGA supports. The mapping in comparison with pmutils is:
- pm-hibernate -> systemctl hibernate
- pm-suspend -> systemctl suspend
- pm-suspend-hybrid -> systemctl hybrid-sleep
To discover whether systemd supports these functions, we inspect
the status of the services that implements them.
With this patch, we can offer hybrid suspend again for newer
guests that do not have pmutils support anymore.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is a cleanup of the resulting code after detaching
pmutils and Linux sys state file logic:
- remove the SUSPEND_MODE_* macros and use an enumeration
instead. At the same time, drop the switch statements
at the start of each function and use the enumeration
index to get the right binary/argument;
- create a new function called run_process_child(). This
function uses g_spawn_sync() to execute a shell command,
returning the exit code. This is a common operation in the
pmutils functions and will be used in the systemd implementation
as well, so this function will avoid code repetition.
There are more places inside commands-posix.c where this new
run_process_child function can also be used, but one step
at a time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
*check/propagate local_err before setting errp directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following the same logic of the previous patch, let's also
decouple the suspend logic from guest_suspend into specialized
functions, one for each strategy we support at this moment.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In bios_supports_mode there is a verification to assert if
the chosen suspend mode is supported by the pmutils tools and,
if not, we see if the Linux sys state files supports it.
This verification is done in the same function, one after
the other, and it works for now. But, when adding a new
suspend mechanism that will not necessarily follow the same
return 0 or 1 logic of pmutils, this code will be hard
to deal with.
This patch decouple the two existing logics into their own
functions, pmutils_supports_mode and linux_sys_state_supports_mode,
which in turn are used inside bios_support_mode. The existing
logic is kept but now it's easier to extend it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To be able to add new suspend mechanisms we need to detach
the existing QMP functions from the current implementation
specifics.
At this moment we have functions such as qmp_guest_suspend_ram
calling bios_suspend_mode and guest_suspend passing the
pmutils command and arguments as parameters. This patch
removes this logic from the QMP functions, moving them to
the respective functions that will have to deal with which
binary to use.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Iterate over the PCI bridges to lookup the PCI device associated with
the block device.
This allows to lookup the driver under the following syspath:
/sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3
It also works with an "old-style" Q35 libvirt hierarchy: root complex
-> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex:
/sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3
The setup can be reproduced with the following qemu command line
(Thanks Marcel for help):
qemu-system-x86_64 -M q35 \
-device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0
-device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1
-device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1
For consistency with other syspath-related debug messages, replace a
\"%s\" in the message with '%s'.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Issue: When upgrading qemu-ga using the msi from an old version
to a newer one, the upgrade is not allowed by the msi
showing this error message "Another version of this product
is already installed."
BZ# 1536331: https://bugzilla.redhat.com/show_bug.cgi?id=1536331
Fix: For the upgrade to be allowed by the msi the WiX file must
provide three things:
1. Changing product's Id. (assigning it to "*")
2. Constant product's UpgradeId. (exists)
3. Changing version. (exists)
Reference: http://wixtoolset.org/documentation/manual/v3/howtos/updates/major_upgrade.html
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The documentation for kernel-version and kernel-release on Windows was
swapped.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds support for getting the usage of
windows driver path.
The usage of fs stored as used_bytes and total_bytes.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds support for getting the usage of mounted
filesystem.
The usage of fs stored as used_bytes and total_bytes.
It's very useful when we try to monitor guest's filesystem.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While reading file content via 'guest-file-read' command,
'qmp_guest_file_read' routine allocates buffer of count+1
bytes. It could overflow for large values of 'count'.
Add check to avoid it.
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If we set mountpoints to qmp_guest_fsfreeze_freeze_list,
we may got nothing to freeze as all mountpoints are
not valid.
So call ga_unset_frozen in this senario.
Also, if we return 0 frozen fs, there is no need to call
guest-fsfreeze-thaw.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-18-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
When listening on unix/tcp sockets there was optional code that would update
the original SocketAddress struct with the info about the actual address that
was listened on. Since the conversion of everything to QIOChannelSocket, no
remaining caller made use of this feature. It has been replaced with the ability
to query the listen address after the fact using the function
qio_channel_socket_get_local_address. This is a better model when the input
address can result in listening on multiple distinct sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171212111219.32601-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The data obtained by GetIfEntry is 32 bits, and it may overflow. Thus
using GetIfEntry2 instead of GetIfEntry.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
*avoid CamelCase variable names
*update field names for MIB_IFROW -> MIB_IF_ROW2
*dynamically probe for GetIfIndex2 to deal with older OSs
*check return value from get_interface_index
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In one case we misconstrue a BOOL return as an HRESULT, and in the
other case we don't check the BOOL return from LookupAccountSidW()
before extracting the HRESULT from GetLastError(). Both can lead to
getNameByStringSID() misreporting an error.
Reported-by: Chen Hanxiao <chenhanxiao@gmail.com>
Suggested-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
we can get the network interface statistics inside a virtual machine by
guest-network-get-interfaces command. it is very useful for us tomonitor
and analyze network traffic.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
* don't rely on sizeof(wchar[]) for wchar[] indexing
* avoid camelCase variable names
* fix up getline() usage
* condensed commit subject line
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At the moment, Windows libraries don't provide a way to access
RTC, so, a workaround is to use the Windows w32tm command to
resync the time.
Related bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1183874
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When VM is in a heavy IO, if the command "guest-fsfreeze-freeze"
is executed, VSS may timeout when trying to hold writes.
Inside guest, Event ID 12298(VSS_ERROR_HOLD_WRITES_TIMEOUT)
is logged in the Event Viewer.
At that time, if we call AbortBackup, qga may hang forever.
This patch will solve this issue.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the package version information (useful for detecting
builds from git or downstream backports), and the copyright notice.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170803163353.19558-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test for guest-get-osinfo command.
Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-get-osinfo' command for reporting basic information of
the guest operating system. This includes machine architecture,
version and release of the kernel and several fields from os-release
file if it is present (as defined in [1]).
[1] https://www.freedesktop.org/software/systemd/man/os-release.html
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
* moved declarations to beginning of functions
* dropped unecessary initialization of struct utsname
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In the first line of run_agent,it has set ga_state = s,don't need
set ga_state = s again behind.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
glib depends on libpcre which was not shipped with the MSI, thus
starting of the qemu-ga.exe failed with the respective error message.
Tell WIXL to ship this library with the MSI to avoid this problem.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
CC: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1357789
Replace hardcoded user and group names ("Administrators", "SYSTEM") with the ones acquired from system. Windows uses localized strings for these names and it may cause the installation to fail.
Windows has Well-known SIDs for "Administrators" group and "SYSTEM" user so they were used to identify required users and groups.
Well-known SIDs: https://support.microsoft.com/en-us/help/243330/well-known-security-identifiers-in-windows-operating-systems
Signed-off-by: Daniel Rempel <daniel@daynix.com>
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The caller of SetupDiGetClassDevs must delete the returned device information
set when it is no longer needed by calling SetupDiDestroyDeviceInfoList.
Signed-off-by: Li Ping <li.ping288@zte.com.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no need to duplicate a fixed string.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Adds a new command `guest-get-timezone` reporting the currently
configured timezone on the system. The information on what timezone is
currently is configured is useful in case of Windows VMs where the
offset of the hardware clock is required to have the same offset. This
can be used for management systems like `oVirt` to detect the timezone
difference and warn administrators of the misconfiguration.
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Tested-by: Sameeh Jubran <sameeh@daynix.com>
* moved stub implementation to end of function for consistency
* document that timezone names are for informational use only.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A command that will list all currently logged in users, and the time
since when they are logged in.
Examples:
virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}
virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Some users find the fsfreeze behaviour confusing. Add some notes about
invalid mount points and Windows usage.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1436976
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vinzenz Feenstra <vfeenstr@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Retrieving the guest host name is a very useful feature for virtual management
systems. This information can help to have more user friendly VM access
details, instead of an IP there would be the host name. Also the host name
reported can be used to have automated checks for valid SSL certificates.
virsh # qemu-agent-command F25 '{ "execute": "guest-get-host-name" }'
{"return":{"host-name":"F25.lab.evilissimo.net"}}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* minor whitespace fix-ups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When the command "guest-fsfreeze-freeze" is executed it causes
the VSS service to log the error below in the Event Viewer. This
error is caused by an issue in the function "CommitSnapshots" in
provider.cpp:
* When VSS_TIMEOUT_MSEC expires the funtion returns E_ABORT. This causes
the error #12293.
|event id| error |
* 12293 : Volume Shadow Copy Service error: Error calling a routine on a
Shadow Copy Provider {00000000-0000-0000-0000-000000000000}.
Routine details CommitSnapshots [hr = 0x80004004, Operation
aborted.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
After triggering a freeze command without any following thaw command,
qemu-ga will not respond to stop operation. This behaviour is wanted on Linux
as there is no time limit for a freeze command and we want to prevent
quitting in the middle of freeze, on the other hand on Windows the time
limit for freeze is 10 seconds, so we should wait for the timeout, thaw
the file system and quit.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The QGA schema states:
@can-offline: Whether offlining the VCPU is possible. This member
is always filled in by the guest agent when the structure
is returned, and always ignored on input (hence it can be
omitted then).
Currently 'can-offline' is missing entirely from the reply. This causes
errors in libvirt which is expecting the reply to be compliant with the
schema docs.
BZ#1438735: https://bugzilla.redhat.com/show_bug.cgi?id=1438735
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the service runs in background on boot even though it is not
needed and once it is running it never stops. The service needs to be
running only during freeze operation and it should be stopped after
executing thaw.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In some cases the slave devices of a virtual block device are tracked
by the parent in the corresponding sysfs node. For instance, if we
have a loop-back mount of the form:
/dev/loop3p1 on /home/mdroth/mnt type ext4 (rw,relatime,data=ordered)
this will be reflected in sysfs as:
/sys/devices/virtual/block/loop3/
...
/sys/devices/virtual/block/loop3/slaves
/sys/devices/virtual/block/loop3/loop3p1
The current code however assumes the mounted virtual block device,
loop3p1 in this case, contains the slaves directory, and reports an
error otherwise. This breaks 'make check' in certain environments.
Fix this by simply skipping attempts to generate disk topology
information in these cases. Since this information is documented
in QAPI as optionally-reported, this should be ok from an API
perspective.
In the future, this can possibly be improved upon by collecting
topology information from the parent in these cases.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We traditionally mark optional members #optional in the doc comment.
Before commit 3313b61, this was entirely manual.
Commit 3313b61 added some automation because its qapi2texi.py relied
on #optional to determine whether a member is optional. This is no
longer the case since the previous commit: the only thing qapi2texi.py
still does with #optional is stripping it out. We still reject bogus
qapi-schema.json and six places for qga/qapi-schema.json.
Thus, you can't actually rely on #optional to see whether something is
optional. Yet we still make people add it manually. That's just
busy-work.
Drop the code to check, fix up and strip out #optional, along with all
instances of #optional. To keep it out, add code to reject it, to be
dropped again once the dust settles.
No change to generated documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
qapi.py has a hardcoded white-list of command names that may violate
the rules on permitted return types. Add a new pragma directive
'returns-whitelist', and use it to replace the hard-coded white-list.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we added the documentation generator in commit 3313b61, doc
comments are mandatory. That's a very good idea for a schema that
needs to be documented, but has proven to be annoying for testing.
Make doc comments optional again, but add a new directive
{ 'pragma': { 'doc-required': true } }
to let a QAPI schema require them.
Add test cases for the new pragma directive. While there, plug a
minor hole in includ directive test coverage.
Require documentation in the schemas we actually want documented:
qapi-schema.json and qga/qapi-schema.json.
We could probably make qapi2texi.py cope with incomplete
documentation, but for now, simply make it refuse to run unless the
schema has 'doc-required': true.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-3-git-send-email-armbru@redhat.com>
[qapi-code-gen.txt wording tweaked]
Reviewed-by: Eric Blake <eblake@redhat.com>
the current implementation fails if we try to freeze an
already frozen filesystem. This can happen if a filesystem
is mounted more than once (e.g. with a bind mount).
Suggested-by: Christian Theune <ct@flyingcircus.io>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
AF_UNIX and AF_VSOCK listen sockets can be passed in by systemd on
startup. This allows systemd to manage the listen socket until the
first client connects and between restarts. Advantages of socket
activation are that parallel startup of network services becomes
possible and that unused daemons do not consume memory.
The key to achieving this is the LISTEN_FDS environment variable, which
is a stable ABI as shown here:
https://www.freedesktop.org/wiki/Software/systemd/InterfacePortabilityAndStabilityChart/
We could link against libsystemd and use sd_listen_fds(3) but it's easy
to implement the tiny LISTEN_FDS ABI so that qemu-ga does not depend on
libsystemd. Some systems may not have systemd installed and wish to
avoid the dependency. Other init systems or socket activation servers
may implement the same ABI without systemd involvement.
Test as follows:
$ cat ~/.config/systemd/user/qga.service
[Unit]
Description=qga
[Service]
WorkingDirectory=/tmp
ExecStart=/path/to/qemu-ga --logfile=/tmp/qga.log --pidfile=/tmp/qga.pid --statedir=/tmp
$ cat ~/.config/systemd/user/qga.socket
[Socket]
ListenStream=/tmp/qga.sock
[Install]
WantedBy=default.target
$ systemctl --user daemon-reload
$ systemctl --user start qga.socket
$ nc -U /tmp/qga.sock
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The command registry encapsulates a single command list. Give the
functions using it a parameter instead. Define suitable command lists
in monitor, guest agent and test-qmp-commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-6-git-send-email-armbru@redhat.com>
[Debugging turds buried]
Reviewed-by: Eric Blake <eblake@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
process_command returns a negative value in case of error. Make this
clear in the "if" statement and fix the strerror argument to flip it
to positive.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Itemize the possible return values of guest-set-vcpus.
Drop the blank lines for consistency with itemized
lists elsewhere.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
