It no longer has any users.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let check_to_replace_node() use the more specialized
bdrv_recurse_can_replace() instead of
bdrv_recurse_is_first_non_filter(), which is too restrictive (or, in the
case of quorum, sometimes not restrictive enough).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After a couple of follow-up patches, this function will replace
bdrv_recurse_is_first_non_filter() in check_to_replace_node().
bdrv_recurse_is_first_non_filter() is both not sufficiently specific for
check_to_replace_node() (it allows cases that should not be allowed,
like replacing child nodes of quorum with dissenting data that have more
parents than just quorum), and it is too restrictive (it is perfectly
fine to replace filters).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum cannot share WRITE or RESIZE on its children. Presumably, it
only does so because as a filter, it seemed intuitively correct to point
its .bdrv_child_perm to bdrv_filter_default_perm().
However, it is not really a filter, and bdrv_filter_default_perm() does
not work for it, so we have to provide a custom .bdrv_child_perm
implementation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using -drive with default options means that a virtio-blk drive will be
created that has write access to the to-be quorum children. Quorum
should have exclusive write access to them, so we should use -blockdev
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is unused now. (And it was ugly because it needed to explore all BDS
chains from the top.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block nodes that do not allow resizing should not share BLK_PERM_RESIZE.
It does not matter whether they are the first non-filter in their chain
or not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no good reason why we would allow external snapshots only on
the first non-filter node in a chain. Parent BDSs should not care
whether their child is replaced by a snapshot. (If they do care, they
should announce that via freezing the chain, which is checked in
bdrv_append() through bdrv_set_backing_hd().)
Before we had bdrv_is_first_non_filter() here (since 212a5a8f09), there
was a special function bdrv_check_ext_snapshot() that allowed snapshots
by default, but block drivers could override this. Only blkverify did
so, however.
It is not clear to me why blkverify would do so; maybe just so that the
testee block driver would not be replaced. The introducing commit
f6186f49e2 does not explain why. Maybe because 08b24cfe37 would have
been the correct solution? (Which adds a .supports_backing check.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 6663a0a337
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200218094402.26625-5-philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 132ada80c4
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200218094402.26625-4-philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests both read failure (from the top node) and write failure (to
the base node) for on-error=report/stop/ignore.
As block-commit actually starts two different types of block jobs
(mirror.c for committing the active later, commit.c for intermediate
layers), all tests are run for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the error handling in the common block job is fixed, we can
expose the on-error option in QMP instead of hard-coding it as 'report'
in qmp_block_commit().
This fulfills the promise that the old comment in that function made,
even if a bit later than expected: "This will be part of the QMP
command, if/when the BlockdevOnError change for blkmirror makes it in".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-7-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_job_error_action() needs to know if reading from the top node or
writing to the base node failed so that it can set the right 'operation'
in the BLOCK_JOB_ERROR QMP event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-6-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_populate() is a very short function and only called in a single
place. Its return value doesn't tell us whether an error happened while
reading or writing, which would be necessary for sending the right data
in the BLOCK_JOB_ERROR QMP event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-5-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block_job_error_action() error call in the commit job gives the
on_err and is_read arguments in the wrong order. Fix this.
(Of course, hard-coded is_read = false is wrong, too, but that's a
separate problem for a separate patch.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-4-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bytes_written variable is only ever written to, it serves no
purpose. This has actually been the case since the commit job was first
introduced in commit 747ff60263.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-3-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not obvious what 'ignore' actually means for block jobs: It could
be continuing the job and returning success in the end despite the error
(no block job does this). It could also mean continuing and returning
failure in the end (this is what stream does). And it can mean retrying
the failed request later (this is what backup, commit and mirror do).
This (somewhat inconsistent) behaviour was introduced and described for
stream and mirror in commit 32c81a4a6e. backup and commit were
introduced later and use the same model as mirror.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-2-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix warning reported by Clang static code analyzer:
CC block/qcow2-bitmap.o
block/qcow2-bitmap.c:650:5: warning: Value stored to 'ret' is never read
ret = -EINVAL;
^ ~~~~~~~
Fixes: 88ddffae8
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200215161557.4077-2-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for 'qemu-img convert' with copy offloading where the
target image has an external data file. If the test hosts supports it,
it tests both the case where copy offloading is supported and the case
where it isn't (otherwise we just test unsupported twice).
More specifically, the case with unsupported copy offloading tests
qcow2_alloc_cluster_abort() with external data files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For external data file, cluster allocations return an offset in the data
file and are not refcounted. In this case, there is nothing to do for
qcow2_alloc_cluster_abort(). Freeing the same offset in the qcow2 file
is wrong and causes crashes in the better case or image corruption in
the worse case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the case that update_refcount() frees a refcount block, it evicts it
from the metadata cache. Before doing so, however, it returns the
currently used refcount block to the cache because it might be the same.
Returning the refcount block early means that we need to reset
old_table_index so that we reload the refcount block in the next
iteration if it is actually still in use.
Fixes: f71c08ea8e
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this commit, BDRVVVFATState.qcow is unrefed in write_target_close
on closing backing bdrv of vvfat. However, qcow bdrv is opend as a child
of vvfat in enable_write_target() so it will be also unrefed on closing
vvfat itself. This causes use-after-free of qcow on freeing vvfat which
has backing bdrv and qcow bdrv as children in this order because
bdrv_close(vvfat) tries to free qcow bdrv after freeing backing bdrv
as QLIST_FOREACH_SAFE() loop keeps next pointer, but BdrvChild of qcow
is already freed in bdrv_close(backing bdrv).
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20200209175156.85748-1-hikarupsp@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I/O requests to encrypted media should be aligned to the sector size
used by the underlying encryption method, not to BDRV_SECTOR_SIZE.
Fortunately this doesn't break anything at the moment because
both existing QCRYPTO_BLOCK_*_SECTOR_SIZE have the same value as
BDRV_SECTOR_SIZE.
The checks in qcow2_co_preadv_encrypted() are also unnecessary because
they are repeated immediately afterwards in qcow2_co_encdec().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200213171646.15876-1-berto@igalia.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, when mirror_co_read() waits for free slots, its
MirrorOp is already in s->ops_in_flight, so if not enough slots are
immediately available, an operation can end up waiting for itself to
complete, which results in a hang.
Fix this by passing the current MirrorOp and skipping this operation
when picking an operation to wait for.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a coroutine is launched, but the coroutine pointer isn't stored
anywhere, debugging any problems inside the coroutine is quite hard.
Let's store the coroutine pointer of a mirror operation in MirrorOp to
have it available in the debugger.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Supporting a build platform beyond its end of life makes no sense.
Spell that out just to be clear.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213084335.15100-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
monitor/misc.c contains code that works only in the system emulator, so
it can't be linked to tools like a storage daemon. In order to make
schema introspection available for tools, move the function to
monitor/qmp-cmds-control.c, which can be linked into the storage daemon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-5-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move all of the QMP commands handlers to implement the 'control' module
(qapi/control.json) that can be shared between the system emulator and
tools such as a storage daemon to a new file monitor/qmp-cmds-control.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-4-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Both the system emulators and tools with QMP support (specifically, the
planned storage daemon) will need to parse monitor options, so move that
code to monitor/monitor.c, which can be linked into binaries that aren't
a system emulator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, there is no usage of TARGET_NR_syscall_count for target
xtensa, and there is no obvious indication if there is some planned
usage in future.
CC: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-10-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update microblaze syscall numbers based on Linux kernel v5.5.
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update arm syscall numbers based on Linux kernel v5.5.
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=UwrK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-02-15' into staging
QAPI patches for 2020-02-15
# gpg: Signature made Sat 15 Feb 2020 10:44:28 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-02-15:
qapi: Delete all the "foo: dropped in n.n" notes
qapi/migration.json: Replace _this_ with *this*
qapi: Add blank lines before bulleted lists
qapi: Use explicit bulleted lists
qapi/ui.json: Avoid `...' Texinfo style quoting
qapi/ui.json: Put input-send-event body text in the right place
qapi: Remove hardcoded tabs
qapi: Fix indent level on doc comments in json files
qapi: Fix incorrect "Not documented" claims in QMP documentation
qapi/block-core.json: Use literal block for ascii art
qga/qapi-schema.json: minor format fixups for rST
qga/qapi-schema.json: Fix indent level on doc comments
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
Makefile: Fix typo in dependency list for interop manpages
configure: Check that sphinx-build is using Python 3
configure: Pick sphinx-build-3 when available
configure: Allow user to specify sphinx-build binary
qapi: Expand documentation for LostTickPolicy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A handful of QAPI doc comments include lines like
"ppcemb: dropped in 3.1". The doc comment parser will just
put these into whatever the preceding section was; sometimes
that's "Notes", and sometimes it's some random other section,
as with "NetClientDriver" where the "'dump': dropped in 2.12"
line ends up in the "Since:" section.
This tends to render wrongly, more so in the upcoming rST
generator, but sometimes even in the Texinfo, as in the case
of QKeyCode:
ac_bookmarks
since 2.10 altgr, altgr_r: dropped in 2.10
Since commit 3264ffced3 (v4.2.0), we have a better place to tell
users about deprecated and deleted functionality --
qemu-deprecated.texi. These "dropped in" remarks all predate it, and
other feature drops of that vintage are not documented anywhere, so
moving these to qemu-deprecated.texi makes little sense. Drop them
instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The MigrationInfo::setup-time documentation is the only place where we
use _this_ inline markup for emphasis, commonly rendered in italics.
We would like to switch the doc comments to rST format, but rST
doesn't recognize that markup and emits literal underscores.
Switch to *this* instead. Changes markup to strong emphasis with
Texinfo, commonly rendered as bold. With rST, it will go right back
to emphasis / italics.
rST also uses **this** for strong (commonly rendered bold) where
Texinfo uses *this*. We have one place in the doc comments
which uses strong/bold markup, in qapi/introspect.json:
Note: the QAPI schema is also used to help define *internal*
When we switch to rST that will be rendered as emphasis / italics.
Markus (who wrote that) thinks that using emphasis / italics
there is an improvement, so we leave that markup alone.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid Texinfo style quoting with `...', because we would like to
switch the doc comments to rST format, and rST treats it as a syntax
error. Use '...' instead, as we do in other doc comments. This looks
OK in Texinfo, and rST formats it as paired-quotation-marks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-13-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In the doc comment for input-send-event, there is a multi-line
chunk of text ("The @device...take precedence") which is intended
to be the main body text describing the event. However it has
been placed after the arguments and Returns: section, which
means that the parser actually thinks that this text is
part of the "Returns" section text.
Move the body text up to the top so that the parser correctly
classifies it as body.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-12-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
