Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 802cbcb730, most issues have been fixed when qemu guest
migration. But the queue size still need to check whether is equal to
PS2_QUEUE_SIZE. If yes, the wptr should set as 0. Or, wptr would larger
than PS2_QUEUE_SIZE and never come back when ps2_queue_noirq is called.
This could lead to OOB access, add check to avoid it.
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 20180607080237.12360-1-liujunjie23@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOS 9 has a bug in its PMU driver whereby after configuring the ADB bus
devices it sends another write to reg 3 on both devices resetting them
both back to the same address.
Add a new disable_direct_reg3_writes property to ADBDevice to disable these
direct writes which can enabled just for the upcoming pmu-adb support.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the Apple ADB documentation, register 3 is a 2-byte register
with the device address in the first byte, and the handler ID in the second
byte.
This is currently the opposite away to which QEMU returns them so switch the
order around.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the pckbd device away from using the old_mmio field
of MemoryRegionOps. This change only affects the memory-mapped
variant of the i8042, which is used by the Unicore32 'puv3'
board and the MIPS Jazz boards 'magnum' and 'pica61'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180601141223.26630-6-peter.maydell@linaro.org
This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally. It is still a
move in the right direction.
Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I2CSlaveClass::init is no more used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-3-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-3-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes an issue by adding bounds checking to multi-byte packets
where the PS/2 mouse data stream may become corrupted due to data being
discarded when the PS/2 ringbuffer is full.
Interrupts for Multi-byte responses are postponed until the final byte
has been queued.
These changes fix a bug where windows guests drop the mouse device
entirely requring the guest to be restarted.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150310.2FEA0381924@moya.office.hostfission.com>
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows guest's to correctly reinitialize and identify the mouse
should the guest decide to re-scan or reset during mouse input events.
When the guest sends the "Identify" command, due to the PC's hardware
architecutre it is impossible to reliably determine the response from
the command amongst other streaming data, such as mouse or keyboard
events. Standard practice is for the guest to disable the device and
then issue the identify command, so this must be obeyed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180507150303.7486B381924@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-4-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful to help diagnose problems related to address clashes during
MacOS 9 boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace the keymap_qcode table with automatically generated
tables.
Missing entries in keymap_qcode now fixed:
Q_KEY_CODE_ASTERISK -> KEY_KPASTERISK
Q_KEY_CODE_KP_MULTIPLY -> KEY_KPASTERISK
Q_KEY_CODE_STOP -> KEY_STOP
Q_KEY_CODE_AGAIN -> KEY_AGAIN
Q_KEY_CODE_PROPS -> KEY_PROPS
Q_KEY_CODE_UNDO -> KEY_UNDO
Q_KEY_CODE_FRONT -> KEY_FRONT
Q_KEY_CODE_COPY -> KEY_COPY
Q_KEY_CODE_OPEN -> KEY_OPEN
Q_KEY_CODE_PASTE -> KEY_PASTE
Q_KEY_CODE_FIND -> KEY_FIND
Q_KEY_CODE_CUT -> KEY_CUT
Q_KEY_CODE_LF -> KEY_LINEFEED
Q_KEY_CODE_HELP -> KEY_HELP
Q_KEY_CODE_COMPOSE -> KEY_COMPOSE
Q_KEY_CODE_RO -> KEY_RO
Q_KEY_CODE_HIRAGANA -> KEY_HIRAGANA
Q_KEY_CODE_HENKAN -> KEY_HENKAN
Q_KEY_CODE_YEN -> KEY_YEN
Q_KEY_CODE_KP_COMMA -> KEY_KPCOMMA
Q_KEY_CODE_KP_EQUALS -> KEY_KPEQUAL
Q_KEY_CODE_POWER -> KEY_POWER
Q_KEY_CODE_SLEEP -> KEY_SLEEP
Q_KEY_CODE_WAKE -> KEY_WAKEUP
Q_KEY_CODE_AUDIONEXT -> KEY_NEXTSONG
Q_KEY_CODE_AUDIOPREV -> KEY_PREVIOUSSONG
Q_KEY_CODE_AUDIOSTOP -> KEY_STOPCD
Q_KEY_CODE_AUDIOPLAY -> KEY_PLAYPAUSE
Q_KEY_CODE_AUDIOMUTE -> KEY_MUTE
Q_KEY_CODE_VOLUMEUP -> KEY_VOLUMEUP
Q_KEY_CODE_VOLUMEDOWN -> KEY_VOLUMEDOWN
Q_KEY_CODE_MEDIASELECT -> KEY_MEDIA
Q_KEY_CODE_MAIL -> KEY_MAIL
Q_KEY_CODE_CALCULATOR -> KEY_CALC
Q_KEY_CODE_COMPUTER -> KEY_COMPUTER
Q_KEY_CODE_AC_HOME -> KEY_HOMEPAGE
Q_KEY_CODE_AC_BACK -> KEY_BACK
Q_KEY_CODE_AC_FORWARD -> KEY_FORWARD
Q_KEY_CODE_AC_REFRESH -> KEY_REFRESH
Q_KEY_CODE_AC_BOOKMARKS -> KEY_BOOKMARKS
NB, the virtio-input device reports a bitmask to the guest driver that
has a bit set for each Linux keycode that the host is able to send to
the guest.
Thus by adding these extra key mappings we are technically changing the
host<->guest ABI. This would also happen any time we defined new mappings
for QEMU keycodes in future.
When a keycode is removed from the list of possible keycodes that host can
send to the guest, it means that the guest OS will think it is possible
to receive a key that in pratice can never be generated, which is harmless.
When a keycode is added to the list of possible keycodes that the host can
send to the guest, it means that the guest OS can see an unexpected event.
The Linux virtio_input.c driver code simply forwards this event to the
input_event() method in the Linux input subsystem. This in turn calls
input_handle_event(), which then calls input_get_disposition(). This method
checks if the input event is present in the permitted keys bitmap, and if
not returns INPUT_IGNORE_EVENT. Thus the unexpected event will get dropped,
which is harmless.
If the guest OS reboots, or otherwise re-initializes the virt-input device,
it will read the new keycode bitmap. No matter how many keys are defined,
the config space has a fixed 128 byte bitmap. There is, however, a size
field defiend which says how many bytes in the bitmap are used. So the guest
OS reads the size of the bitmap, and then it reads the data from bitmap upto
the designated size. So if the guest OS re-initializes at precisely the time
that QEMU is migrated across versions, in the worst case, it could conceivably
read the old size field, but then get the newly updated bitmap. If a key were
added this is harmless, since it simply means it may not process the newly
added key. If a key were removed, then it could be readnig a byte from the
bitmap that was not initialized. Fortunately QEMU always memsets() the entire
bitmap to 0, prior to setting keybits. Thus the guest OS will simply read
zeros, which is again harmless.
Based on this analysis, it is believed that there is no need to preserve the
virtio-input-hid keymaps across migration, as the host<->guest ABI change is
harmless and self-resolving at time of guest reboot.
NB, this behaviour should perhaps be formalized in the virtio-input spec
to declare how guest OS drivers should be written to be robust in their
handling of the potentially changable key bitmaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
During Qemu guest migration, a destination process invokes ps2
post_load function. In that, if 'rptr' and 'count' values were
invalid, it could lead to OOB access or infinite loop issue.
Add check to avoid it.
Reported-by: Cyrille Chatras <cyrille.chatras@orange.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171116075155.22378-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Linux, a mouse event is generated for both down and up when mouse
wheel is used. This caused virtio_input_send() to be called twice each
time the wheel was used.
This commit adds a check for the button down state and only calls
virtio_input_send() when it is true.
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20171222152531.1849-4-miika9764@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This was accidentally omitted from 77cb0f5aaf "Split adb.c into adb.c, adb-mouse.c
and adb-kbd.c".
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It makes the code clearer to separate the bus implementation
from the devices one.
Replace ADB_DPRINTF() with trace events (and adding new ones in adb-kbd.c).
Some minor changes to make checkpatch.pl happy.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20171220121406.24056-1-laurent@vivier.eu>
It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for these keys: audiomute volumedown volumeup power.
Tested with "sendkey" command in monitor and verify the behavior
in guest OS.
Signed-off-by: Tao Wu <lepton@google.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'Pause' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Pause' key is supposed to send
AT Set 1: e1 1d 45 91 9d c5 (Down) <nothing> (Up)
AT Set 2: e1 14 77 e1 f0 14 f0 77 (Down) <nothing> (Up)
which QEMU gets right. When combined with Ctrl (both left and right variants),
a different sequence is expected
AT Set 1: e0 46 e0 c6 (Down) <nothing> (Up)
AT Set 2: e0 7e e0 f0 73 (Down) <nothing> (Up)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ps2 device was previously fixed to send the special Pause/Print
scancode sequences in:
commit 8c10e0baf0
Author: Hervé Poussineau <hpoussin@reactos.org>
Date: Thu Sep 15 22:06:26 2016 +0200
ps2: use QEMU qcodes instead of scancodes
The sequence used for Pause had a small typo in the AT set 1, with a 0xe1
accidentally changed to 0x91. This is not immediately visible with Linux
guests since they run the ps2 device with AT set 2 scancodes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'Print' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Print' key is supposed to send
AT Set 1: e0 2a e0 37 (Down) e0 b7 e0 aa (Up)
AT Set 2: e0 12 e0 7c (Down) e0 f0 7c e0 f0 12 (Up)
which QEMU gets right. When combined with Shift/Ctrl (both left and right
variants), the leading two bytes should be dropped, resulting in
AT Set 1: e0 37 (Down) e0 b7 (Up)
AT Set 2: e0 7c (Down) e0 f0 7c (Up)
This difference is pretty benign, since of all the operating systems I have
checked (Linux, FreeBSD and OpenStack), none bother to check the leading two
bytes anyway. This change none the less makes the ps2 device better follow real
hardware behaviour.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'Print' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Print' key is supposed to send
AT Set 1: e0 2a e0 37 (Down) e0 b7 e0 aa (Up)
AT Set 2: e0 12 e0 7c (Down) e0 f0 7c e0 f0 12 (Up)
which QEMU gets right. When pressed in combination with the 'Alt_L' or 'Alt_R'
keys (which signify SysRq), the scancodes are required to follow a different
scheme. With Alt_L, the expected sequences are
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
And with Alt_R
AT set 1: e0 38, 54 (Down) d4, e0 b8 (Up)
AT set 2: e0 11, 84 (Down) f0 84, f0 e0 11 (Up)
It is actually slightly more complicated than that, because (according results
of 'showkey -s', keyboards will in fact first release the currently pressed
modifier before sending the sequence above (which effectively re-presses &
then releases the modifier) and finally re-press the original modifier
afterwards. IOW, with Alt_L we need to send
AT set 1: b8, 38, 54 (Down) d4, b8, 38 (Up)
AT set 2: f0 11, 11, 84 (Down) f0 84, f0 11, 11 (Up)
And with Alt_R
AT set 1: e0 b8, e0 38, 54 (Down) d4, e0 b8, e0 38 (Up)
AT set 2: e0 f0 11, e0 11, 84 (Down) f0 84, e0 f0 11, e0 11 (Up)
The AT set 3 scancodes have no special handling for Alt-Print.
Rather than fixing the handling of the 'print' key in the ps2 driver to consider
the Alt modifiers, way back, a patch was commited that defined an extra 'sysrq'
key name:
commit f2289cb692
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
With this patch QEMU would send
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
but this doesn't match what actual real keyboards send, as it is not releasing
the original modifier & pressing it again afterwards. In addition the original
problem remains, and a new problem was added:
- The sequence 'alt-print-t' is still broken, acting as if 'print-t' was
requested
- The sequence 'sysrq-t' is broken, injecting an undefine scancode sequence
tot he guest os (bare 0x54)
To deal with this mess we make these changes to the ps2 code, so that we track
the state of modifier keys (Alt, Shift, Ctrl - both left & right). Then we can
vary what scancodes are sent for Q_KEY_CODE_PRINT according to the Alt key
modifier state
Interestingly, it appears that of operating systems I've checked (Linux, FreeBSD
and OpenSolaris), none of them actually bother to validate the full sequences
for a unmodified 'Print' key. They all just ignore the leading "e0 2a" and
trigger based off "e0 37" alone. The latter two byte sequence is what keyboards
send with 'Print' is combined with 'Shift' or 'Ctrl' modifiers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hardware scancodes are all documented in hex, so use that in trace
events to make it easier to understand.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu uses wheel-up/down button events for mouse wheel input, however
linux applications typically want REL_WHEEL events.
This fixes wheel with linux guests. Tested with X11/wayland, and
windows virtio-input driver.
Based on a patch from Marc.
Added property to enable/disable wheel axis.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170926113243.26081-1-kraxel@redhat.com
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.
This patch is created by the following:
check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56
check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0
check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0
fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'
[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both keys exist already: "ac_search" is "find" and "ac_stop" is "stop".
Fixes: 37810e8055
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170728063415.27480-1-kraxel@redhat.com
The right alt key (alt_r aka KEY_RIGHTALT) is used for AltGr.
The altgr and altgr_r keys simply don't exist. Drop them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170727104720.30061-1-kraxel@redhat.com
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When the guest resets the keyboard also clear the queue. It is highly
unlikely that the guest is still interested in the events stuck in the
queue, and it avoids confusing the guest in case the queue is full and
the ACK can't be queued up.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1372583
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606112105.13331-4-kraxel@redhat.com
Factor out ps2 queue reset to a separate function.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606112105.13331-3-kraxel@redhat.com
Cleanup: Create and use a typedef for PS2State and stop passing void
pointers. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606112105.13331-2-kraxel@redhat.com
When resetting the keyboard, we need to reset not just the pending keystrokes,
but also any pending modifiers. Otherwise there's a race when we're getting
reset while running an escape sequence (modifier 0x100).
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1498117295-162030-1-git-send-email-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
