bb8160eb78
242 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
BALATON Zoltan
|
9ba58cb47f |
sam460ex: Update u-boot-sam460ex firmware
Update the submodule and u-boot-sam460-20100605.bin to include following fixes from Sebastian Bauer: - Fix build with newer gcc - Decrease unnecessary delay which fixes slow booting from CD Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Gerd Hoffmann
|
91b8eba9ec |
vgabios: remove submodule and build rules.
It's the old, lgpl vgabios implementation. Was left in as fallback when we switched to seavgabios, so we could easily switch back in case we see regressions. It's unused since years now, reportedly doesn't even build, and lacks support for recently (and not so recently) added display devices. Zap it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
eda553a442 |
seabios: enable ide dma
QNX reportedly requires this to boot. Should also speed up booting other guests. Note: Upstream seabios defaults this to 'n' to due to known problems on physical hardware (qemu not affected), and wouldn't flip the default to 'y'. So we adjust our local build config accordingly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
75056cef41 |
seabios: add vga configs for bochs-display and ramfb
Both bochs-display and ramfb are devices with a simple framebuffer and no vga emulation or text mode. seavgabios has support for text mode emulation (at vgabios call level), we are using that to provide some vga compatibility support for these devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
429d3ae2c8 |
seabios: update submodule to release 1.11.2
git shortlog rel-1.11.1..rel-1.11.2
-----------------------------------
Gerd Hoffmann (11):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Alexey Kardashevskiy
|
d21bbcc655 |
pseries: Update SLOF firmware image to qemu-slof-20180621
The changes are: 1. fixed broken_sc1; 2. added switching between boot consoles; 3. added PXE boot. The full list is: > lib/libnet/pxelinux: Fix two off-by-one bugs in the pxelinux.cfg parser > lib/libnet/pxelinux: Make the size handling for pxelinux_load_cfg more logical > libc: Add a simple implementation of an assert() function > libnet: Support UUID-based pxelinux.cfg file names > slof: Add a helper function to get the contents of a property in C code > libnet: Add support for DHCPv4 options 209 and 210 > libnet: Wire up pxelinux.cfg network booting > libnet: Add functions for downloading and parsing pxelinux.cfg files > libnet: Put code for determing TFTP error strings into a separate function > libc: Add the snprintf() function > libnet: Pass ip_version via struct filename_ip > resolve ihandle and xt handle in the input command (like for the output) > Fix output word > obp-tftp: Make sure to not overwrite paflof in memory > libnet: Get rid of unused huge_load and block_size parameters > libc: Check for NULL pointers in free() > libc: Implement strrchr() > libnet: Get rid of unnecessary (char *) casts > broken_sc1: check for H_PRIVILEGE > OF: Use new property "stdout-path" for boot console Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Peter Maydell
|
46012db666 |
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited prefetch, but actually working fine - add cpu model for the z14 Model ZR1 - add support for pxelinux.cfg-style network booting to the s390x firmware -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlsozdISHGNvaHVja0By ZWRoYXQuY29tAAoJEN7Pa5PG8C+vafQQAIUl+TPrwXQQCp9xBy+CpMAAQtPp0PI2 DGisaVohLQARfNorqDXqPWMy9ulbYQ1bXcdpbhVwzIHlBZopMAvC+QTRwqs4EIFw 0vjvm5ttC2b3zt+7BAom2xWqaxmSen02O0Qj2l5HpFBVp+5afT74geiWhmmirWbw x/JEEnlOcP2dHAvujfbv9Slst1B/OQ4xz7gf5IOlfX2MCsDcIyvqrw6a2D5G4PlX DHPZ7PzA6edoG+qP1DvH6Myi19zs3edAKJp5sdCK92FgJBxW6nI1+ThoN3ApbuDm U7HYeLzrQ/dXWiHMwA+2QP5Iqe/VfKCvqVcm9+m458dQLiN8ZiyGmUbbZtL0L0X8 KQB70mSQjawWRVLr1vsvZNAnCeqjT2hZz37EAwA3gGOeIfFjxFLNtBu4WKgt4soG 7Uq99irLBkfJKY56gQUc0LYOKhTMlDk3Z3xzv2Y2q29T+Cp0927ruHQdRFo3xQAu kBc1pIjt2Rfuh2EJkyoprMuM/e5E8OZZv1uLbqUOYKxIHCHp05wqNEva5WOhS5Ah 05Un03Vw/CVWnXuNSYR+eKrMydIZALA+GTpQYZuiAo8+dT9R3dmTHjQRqOdck3lB BU1MzU3kfflmmToi4Pto1PtNPeAaCWMcFNLOgky3L+Wfx2p4WQxYZP2g42be0K4U m4G6RXHStHCy =hMax -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180619' into staging - cleanup in virtio-ccw - accommodate guests using vfio-ccw without specifying unlimited prefetch, but actually working fine - add cpu model for the z14 Model ZR1 - add support for pxelinux.cfg-style network booting to the s390x firmware # gpg: Signature made Tue 19 Jun 2018 10:33:06 BST # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20180619: pc-bios/s390-ccw: Update the s390-netboot.img binary pc-bios/s390-ccw: Optimize the s390-netboot.img for size pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID pc-bios/s390-ccw/net: Add support for pxelinux-style config files pc-bios/s390-ccw/net: Update code for the latest changes in SLOF roms: Update SLOF submodule to current status pc-bios/s390-ccw: define loadparm length s390x/cpumodels: add z14 Model ZR1 s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW vfio-ccw: remove orb.c64 (64 bit data addresses) check vfio-ccw: add force unlimited prefetch property virtio-ccw: clean up notify Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Mark Cave-Ayland
|
5b20e4cace |
Update OpenBIOS images to 8fe6f5f96f built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Thomas Huth
|
4248981d51 |
roms: Update SLOF submodule to current status
We need the latest version of SLOF's libnet for adding pxelinux.cfg support in the s390-ccw bios, too. Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
BALATON Zoltan
|
6b3913e085 |
roms/u-boot-sam460ex: Change to qemu git mirror and update
Now that we have a mirror of this repo on git.qemu.org change the submodule to use that and update it to latest commit which fixes a dangling symlink and removes two big binaries that are not needed. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Richard Henderson
|
5aa4860082 |
Update seabios-hppa
A dozen or so fixes from Helge upstream. |
||
|
Gerd Hoffmann
|
9cdd2a736b |
update seabios to 1.11.1
git shortlog rel-1.11.0..rel-1.11.1
===================================
Kevin O'Connor (3):
build: Use git describe --always
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
BALATON Zoltan
|
b41a162c1b |
roms: Added git submodule for u-boot-sam460 (firmware for sam460ex)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Mark Cave-Ayland
|
feb3174ff2 |
Update OpenBIOS images to 54d959d9 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Richard Henderson
|
edf90bd0af |
roms/seabios-hppa: Update submodule and image
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> |
||
|
Richard Henderson
|
43ad25643a |
pc-bios: Add hppa-firmware.img and git submodule
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> |
||
|
Mark Cave-Ayland
|
bbb596054e |
Update OpenBIOS images to b5c93acd14 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Cédric Le Goater
|
60e58bd9f0 |
ppc/pnv: Update skiboot firmware image
This is skiboot 5.9 (commit e0ee24c2). It brings improved POWER9 support among many other things. Built from submodule. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Alexey Kardashevskiy
|
c334e5f382 |
pseries: Update SLOF firmware image to qemu-slof-20171214
The main changes are: - able to handle more devices with specified bootindex; - implements flatten device tree rendering, for both QEMU and guest kernel. The full list is: > boot: use a temporary bootdev-buf > boot: do not concatenate bootdev > libvirtio: Mark struct virtio_scsi_req_cmd as packed > fdt: Implement "fdt-fetch" method for client interface > rtas: Store RTAS address and entry in the device tree > board-qemu: Fix slof-build-id length > fdt: Pass the resulting device tree to QEMU > fdt: Fix version and add a word for FDT header size > tree: Rework set-chosen-cpu and store /chosen ihandle and phandle > node: Add some documentation > Revert various SLOF-to-QEMU private hypercalls > Use input-device and output-device > netboot: Create bootp-response when bootp is used > libnet/ipv6: assign times_asked value directly > usb-xhci: Reset ERSTSZ together with ERSTBA > virtio-net: rework the driver to support multiple open > board-qemu: add private hcall to inform host on "phandle" update Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Gerd Hoffmann
|
6350b2a09b |
seabios: update to 1.11 final
Update our pre-release seabios snapshot to the final release.
git shortlog
============
Gerd Hoffmann (1):
sercon: Disable ScreenAndDebug in case both serial console and serial debug are active
Kevin O'Connor (2):
timer: Avoid integer overflows in usec and nsec calculations
docs: Note v1.11.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
1bc6bc5c18 |
Update OpenBIOS images to 83818bd built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
083fab0290 |
seabios: update to 1.11 prerelease
This is the seabios update for qemu 2.11. Well, almost, seabios is in
freeze for the upcoming 1.11 release. This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.
With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.
git shortlog
============
Aleksandr Bezzubikov (3):
pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
pci: add QEMU-specific PCI capability structure
pci: enable RedHat PCI bridges to reserve additional resources on PCI init
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Daniel Verkamp (5):
nvme: support NVMe 1.0 controllers
nvme: extend command timeout to 5 seconds
nvme: fix reversed loop condition in cmd_readwrite
nvme: fix extraction of status code bits
nvme: fix copy-paste mistake in comment
Filippo Sironi (1):
nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues
Gerd Hoffmann (7):
usb: add hub portmap
usb-xhci: use hub portmap
std: add cp437 to unicode map
kbd: make enqueue_key public, add ascii_to_keycode
romfile: add support for constant files.
paravirt: serial console configuration.
add serial console support
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Jason Wang (1):
virtio: IOMMU support
Julian Stecklina (2):
block: add NVMe boot support
nvme: fix out of memory behavior
Julius Werner (1):
coreboot: Adapt to upstream CBMEM console changes
Kevin O'Connor (26):
usb: Make usb_time_sigatt variable static
tpm: Add comment banners to tcg.c separating major parts of spec
tpm: Don't call tpm_set_failure() from tpm12_get_capability()
tpm: Move code around in tcgbios.c to keep like code together
acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
docs: Note release dates for 1.10.1 and 1.10.2
resume: Don't attempt to use generic reboot mechanisms on QEMU
boot: Increase description size in boot menu
src: Minor - remove tab characters that slipped into SeaBIOS C code
NVMe: Allow NVMe to be enabled on real hardware
smm: Backup and restore A20 on an SMI based mode switch
stacks: Make sure to initialize Call16Data
stacks: Don't update the A20 settings if they haven't changed
stacks: There is no need to disable NMI if it is already disabled
vga: Fix bug in stdvga_get_linesize()
docs: Fix typos in Memory_Model.md
tcgbios: Fix use of unitialized variable
boot: Rename drive_g to drive
disk: Don't require the 'struct drive_s' to be in the f-segment
block: Rename disk_op_s->drive_gf to drive_fl
virtio: Allocate drive_s storage in low memory
xhci: Build TRBs directly in xhci_trb_queue()
xhci: Verify the device is still present in xhci_cmd_submit()
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Patrick Rudolph (4):
SeaVGABios/cbvga: Advertise correct pixel format
SeaVGABIOS/vbe: Query driver for scanline pitch v2
SeaVGABios/cbvga: Use active mode to clear screen
SeaVGABios/cbvga: Advertise compatible VESA modes
Paul Menzel (1):
vgasrc: Increase debug level
Petr Berky (1):
config: Add function to check if fw_cfg exists
Ricardo Ribalda Delgado (1):
serialio: Support for mmap serial ports
Roman Kagan (11):
blockcmd: accept only disks and CD-ROMs
blockcmd: generic SCSI luns enumeration
virtio-scsi: enumerate luns with REPORT LUNS
esp-scsi: enumerate luns with REPORT LUNS
usb-uas: enumerate luns with REPORT LUNS
pvscsi: fix the comment about lun enumeration
mpt-scsi: try to enumerate luns with REPORT LUNS
lsi-scsi: reset in case of a serious problem
lsi-scsi: try to enumerate luns with REPORT LUNS
blockcmd: start REPORT_LUNS with the smallest buffer
Revert "lsi-scsi: reset in case of a serious problem"
Stefan Berger (1):
tpm: Log TPM 2 digest structure in little endian format
Youness Alaoui (1):
nvme: Enable NVMe support for non-qemu hardware
Zeh, Werner (1):
ahci: Disable Native Command Queueing
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
8722a719de |
Update OpenBIOS images to 314d4f8 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexey Kardashevskiy
|
86844c2133 |
pseries: Update SLOF firmware image
The main changes are: - fixes in PCI bridges code; - LUN>255 are allowed not in virtio-scsi. The full list is: > pci-scan: Fix pci-bridge-set-mem-base and pci-bridge-set-mem-limit > pci: Avoid 32-bit prefetchable memory area if possible > Remove unused functions ishexdigit and $cat-comma > pci: Translate PCI addresses to host addresses at the end of map-in > Define 'open' and 'close' words of the /aliases nodes right from the start > virtio-scsi: Allow LUNs bigger than 255 > paflof: Silence gcc's -Warray-bounds warning for stack pointers > board_qemu: move code out of fdt-fix-node-phandle > board_qemu: drop unused values early in fdt-fix-node-phandle > pci: Improve the pci-var-out debug function > libhvcall: drop unused KVMPPC_H_REPORT_MC_ERR and KVMPPC_H_NMI_MCE defines Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Peter Maydell
|
1f244ebbba |
Pull request
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJZbH2LAAoJEEy22O7T6HE4nnUQAJHHnb83bEMX+Dpc7s8SWNq9 xpysAHmI47qvQvgairj/rFsRCoKTxU1sIMwLYMXa6NGQacD3ZjXH1HhxLQabZPcV YkoiLGFwiYSpHCeOzFhoQWi7mk/YHTwhGbjuJCs0i0tob8uSFCrpNGgrxuaP2YMh l6gbvEwT3TufTEMq8RzeNxgMFtKbjDsEzdwjSx0SXBdVcL69iKvvP7lkoWntcL84 hSzXX/gTnfcDXwQl5/KPvnO8WY0O8bOzpkaxKJZnr+ul/4vNsTQtUv2iLtzhdKBS j/kPVvzCR2RSzPtSt5CzlkaiW437udeKEf9QuUYM86a6dH0iah6Yub4r51oCYmJ1 UPasBqUdUGuXUEV8yfiJHbV7YACGwx3lB5U4Qlzxd7536yoJIYMbHZuzDvs/97VQ 0mkEDHS43HBo+m6J2rTPFXwyngcxILkoSdHlQzfAQ8cEblYzfLiiZ7DehymdPvkT lreCvgOmWfhw9dUcRyOyYG+38Mqf/bV/hQRJEnvHbK/kCS4xACvyl38lVgWZQSV9 JntuxHI7Qir5aBJIJyK0X+9PxmNQysU8mMNQ0hgv1DduowlGm5CvC1ccpCObHu0D xbzHosT9Fj7vstaFuwq/gtd8rwfxa/maBKikEbyeHOZfdGq4ly3m/EtbWRbmYWvZ IVo6pKd67nmVN5zYMs/I =OaYu -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/kraxel/tags/ipxe-pull-request' into staging Pull request # gpg: Signature made Mon 17 Jul 2017 10:04:11 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ipxe-pull-request: ipxe: update to commit 0600d3ae94 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Alexander Graf
|
73663d71ef |
PPC: E500: Update u-boot to v2017.07
Quite a while has passed since we last updated U-Boot for e500. This patch bumps it to the last released version 2017.07 to make sure users don't feel like they're using out of date software. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Gerd Hoffmann
|
18375b5c16 |
ipxe: update to commit 0600d3ae94
Rebase ipxe to latest git master.
Pick up four virtio-net fixes.
complete shortlog of ipxe changes
---------------------------------
Adamczyk, Konrad (1):
[thunderx] Use ThunderxConfigProtocol to obtain board configuration
Bartosz Szczepanek (1):
[thunderx] Fix hardware deinitialization
Christian Nilsson (1):
[intel] Add INTEL_NO_PHY_RST for I219-LM (2)
David Decotigny (2):
[build] Return const char * from uuid_ntoa()
[af_packet] Add new AF_PACKET driver for Linux
Jason Wang (1):
[virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM
Jerone Young (1):
[intel] Add support for I219-V in 7th Gen Intel NUC
Konrad Adamczyk (1):
[thunderx] Don't disable NIC when exiting from iPXE
Ladi Prosek (3):
[virtio] Cap queue size to MAX_QUEUE_NUM
[virtio] Simplify virtqueue shutdown
[virtio] Remove queue size limit in legacy virtio
Martin Habets (1):
[sfc] Add driver for Solarflare SFC8XXX adapters
Michael Brown (159):
[interface] Provide intf_reinit() to reinitialise nullified interfaces
[iscsi] Avoid potential infinite loops during shutdown
[efi] Add basic EFI SAN booting capability
[undi] Allocate base memory before calling UNDI loader entry point
[romprefix] Avoid using PMM-allocated memory in UNDI loader entry point
[undi] Clean up driver and device name information
[prefix] Remove impossible progress message
[prefix] Include diagnostic information within progress messages
[undi] Try matching UNDI ROMs in BIOS enumeration order
[efi] Work around temporal anomaly encountered during ExitBootServices()
[ipv4] Accept unicast packets for the local network broadcast address
[build] Add %.vhd target for building VM bootable disk images
[virtio] Use separate RX and TX empty header buffers
[cloud] Add ability to retrieve Google Compute Engine metadata
[virtio] Use host-specified MTU when available
[netdevice] Allow MTU to be changed at runtime
[cloud] Show CPU vendor and model in example cloud boot scripts
[hyperv] Ignore unsolicited VMBus messages
[pic8259] Fix definitions for "read IRR" and "read ISR" commands
[efi] Fix building elf2efi.c when -fpic is enabled by default
[interface] Avoid unnecessary reference counting in intf_unplug()
[interface] Remove misleading comment
[interface] Unplug interface before calling intf_close() in intf_shutdown()
[netdevice] Limit MTU by hardware maximum frame length
[cpuid] Provide cpuid_supported() to test for supported functions
[time] Allow timer to be selected at runtime
[hyperv] Provide timer based on the 10MHz time reference count MSR
[int13] Avoid potential division by zero
[int13] Test correct return status from INT 13 calls
[settings] Add "unixtime" builtin setting to expose the current time
[time] Report attempts to use timers before initialisation
[interface] Provide the ability to shut down multiple interfaces
[http] Cleanly shut down potentially looped interfaces
[efi] Add missing SANBOOT_PROTO_HTTP to EFI default configuration
[block] Remove spurious comments
[block] Centralise SAN device abstraction
[block] Centralise "san-drive" setting
[int13] Refactor to use centralised SAN device abstraction
[efi] Refactor to use centralised SAN device abstraction
[block] Retry any SAN device operation
[iscsi] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Use intfs_shutdown() when shutting down multiple interfaces
[block] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Avoid duplicate calls to scsicmd_close()
[build] Provide common ARRAY_SIZE() definition
[efi] Update to current EDK2 headers
[efi] Add EFI_ACPI_TABLE_PROTOCOL header and GUID definition
[efi] Provide ACPI table description for SAN devices
[efi] Skip cable detection at initialisation where possible
[undi] Move PXE API caller back into UNDI driver
[dhcp] Allow vendor class to be changed in DHCP requests
[hermon] Avoid potential integer overflow when calculating memory mappings
[arbel] Avoid potential integer overflow when calculating memory mappings
[xfer] Ensure va_end() is called on failure path
[nfs] Fix double free bug on error path
[linda] Use correct length for memset()
[qib7322] Use correct length for memset()
[sis900] Remove extraneous memset() with incorrect length
[802.11] Remove redundant NULL pointer check after dereference
[crypto] Free correct pointer on the error path
[librm] Fail gracefully if asked to ioremap() a zero length
[usb] Use correct length for memcpy()
[mucurses] Attempt to fix test for empty string
[mucurses] Attempt to fix keypress processing logic
[mucurses] Attempt to fix resource leaks
[hyperv] Fix resource leaks on error path
[slam] Fix resource leak on error path
[slam] Avoid NULL pointer dereference in slam_pull_value()
[eoib] Avoid passing a NULL I/O buffer to netdev_tx_complete_err()
[http] Add missing check for memory allocation failure
[mucurses] Attempt to fix use of uninitialised buffer with strcat()
[xhci] Avoid accessing beyond end of endpoint context array
[build] Avoid confusing sparse in single-argument DBG() macros
[infiniband] Return status code from ib_create_cq() and ib_create_qp()
[infiniband] Return status code from ib_create_mi()
[block] Quell spurious Coverity size mismatch warning
[ath] Add missing break statements
[pixbuf] Avoid potential division by zero
[usb] Use correct length for memcpy()
[xen] Use standard calling pattern for asprintf()
[tcp] Use correct length for memset()
[video_subr] Use memmove() for overlapping memory copy
[arbel] Assert that mapping length is non-zero
[hermon] Assert that mapping length is non-zero
[tlan] Guard against failure to identify chip
[w89c840] Avoid potential array overrun
[sis190] Avoid NULL pointer dereference
[mucurses] Ensure SLK labels are always terminated
[coverity] Add Coverity user model
[malloc] Track maximum heap usage
[travis] Add minimal .travis.yml file
[travis] Build and run the unit test suite
[travis] Integrate with Coverity Scan
[rtl818x] Fix resource leak on error path
[pcnet32] Eliminate redundant register read
[iobuf] Increase minimum I/O buffer size to 128 bytes
[vxge] Fix use of stale I/O buffer on error path
[scsi] Avoid duplicate call to scsicmd_close() on TEST UNIT READY failure
[block] Add dummy SAN device
[block] Add basic multipath support
[int13] Improve geometry guessing for unaligned partitions
[int13con] Avoid overwriting random portions of SAN boot disks
[time] Add sleep_fixed() function to sleep without checking for Ctrl-C
[block] Allow SAN retry count to be reconfigured
[block] Add a small delay between attempts to reopen SAN targets
[block] Retry reopening indefinitely for multipath devices
[block] Gracefully close SAN device if registration fails
[linux] Use dummy SAN device
[block] Ignore redundant xfer_window_changed() messages
[block] Describe all SAN devices via ACPI tables
[iscsi] Do not install iBFT when no iSCSI targets exist
[http] Notify data transfer interface when underlying connection is ready
[mucurses] Fix erroneous __nonnull attribute
[build] Avoid implicit-fallthrough warnings on GCC 7
[linux] Fix building with kernel 4.11 headers
[scsi] Retry TEST UNIT READY command
[libc] Add stdbool.h standard header
[efi] Fix typo in efi_acpi_table_protocol_guid
[efi] Add efi_sprintf() and efi_vsprintf()
[block] Allow use of a non-default EFI SAN boot filename
[intel] Show original CTRL and STATUS values in debugging output
[intel] Do not enable ASDE on i350 backplane NIC
[block] Provide sandev_read() and sandev_write() as global symbols
[block] Provide abstraction to allow system to be quiesced
[hyperv] Do not fail if guest OS ID MSR is already set
[hyperv] Remove redundant return status code from mapping functions
[hyperv] Cope with Windows Server 2016 enlightenments
[efi] Standardise PCI debug messages
[iscsi] Always send FirstBurstLength parameter
[iscsi] Fix iBFT when no explicit initiator name setting exists
[xen] Provide 18 4kB receive buffers to work around xen-netback bug
[efi] Prevent EFI code from being linked in to non-EFI builds
[tls] Keep cipherstream window open until TLS negotiation is complete
[settings] Extend numerical setting tags to 64 bits
[acpi] Make acpi_find_rsdt() a per-platform method
[efi] Provide access to ACPI tables
[acpi] Expose ACPI tables via settings mechanism
[syslog] Handle backspace characters
[hdprefix] Avoid attempts to read beyond the end of the disk
[usb] Allow for USB network devices with no interrupt endpoint
[build] Use -no-pie on newer versions of gcc
[ecm] Display invalid MAC address strings in debug messages
[cpuid] Allow input %ecx value to be specified
[crypto] Expose RSA_CTX_SIZE constant
[crypto] Expose asn1_grow()
[crypto] Provide asn1_built() to construct a cursor from a builder
[crypto] Expose pem_asn1() for use with non-image data
[exanic] Add driver for Exablaze ExaNIC cards
[usb] Use non-zero language ID to retrieve strings
[mucurses] Avoid potential division by zero
[tls] Support RFC5746 secure renegotiation
[smscusb] Abstract out common SMSC USB device functionality
[smsc95xx] Use common SMSC USB device functionality
[smsc75xx] Use common SMSC USB device functionality
[smscusb] Add ability to read MAC address from OTP
[smscusb] Move non-inline register access functions to smscusb.c
[smscusb] Allow for alternative PHY register layouts
[smsc75xx] Expose functionality shared with LAN78xx devices
[lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs
Mika Tiainen (1):
[intel] Add INTEL_NO_PHY_RST for I219-V
Mike McCormack (1):
[sky2] Use 32-bit read to read Y2_VAUX_AVAIL
Raed Salem (2):
[golan] Update Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support
[golan] Bug fixes and improved paging allocation method
Vishvananda Ishaya (1):
[intel] Reset all virtual function settings
Vishvananda Ishaya Abrams (1):
[iscsi] Don't close when receiving NOP-In
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Peter Maydell
|
fbc8ea1ed0 |
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iQIcBAABAgAGBQJZaJ3gAAoJEBF7vIC1phx8VSAP/1zKh7ti4Y2dIVb94c1tvECE LRNdCdAPhEqL6zybty85aG04sjAmSu50NGfo5t8AGq1U9WBWrCy7/wWSFdK2GI63 Umc1fR7aBF9FiFayKONhExaREh6gSWVHZF1RyaPIWnnjRIeX8nqgPEnpdZNiVVrG 5cKHV2SUd5pMDJUiQdZGZgbgG1c+MWJx2BHoduM+K0UnmFjpyLCL4Rq58Q2Q87Nj /+yPSVApFFeMsDpem6DNttE6Msa+V+K+EmRhRKqZNOWrdRKH5vvj6Fl/LSxVtd9c CEG+aZGjFd693uP9ge0WmjeUJtVHIGt9xKdeU0d7FijZWehjsIqalLoqapzK8ddF h6HJuNsmk/SZF7O9JsbHT3Epyr+7Hk0dx78Ku1GNQuUxtFL93eyIJmRdgz7Zo3Lj ZTPJvCA13GjPWtgzG5dG3JH1hiAS+Yai18BgdzGbs+qfMCwPdbWkoqg7sARwAJNe 50fo/ayJvcmHJnSNO6hErFoU38WctGgO8fWp+oVvD8Um1ny1aBFFuJgJIMf47nhu x1IdA6UGrNN0yNC4/UgyYBDV1hfvo/phMdoHqle9AcMmPYOD1DBr0genK/bYbICk Dio7og9nKgheLRBHz2u5TuYcCsfE/7rtwZX+iXMvoC7VE7Dqs+Q7Zjwwwtwj4x9F FwWuf/Bv1s6IkVLlP8Ow =2bOV -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups - add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support # gpg: Signature made Fri 14 Jul 2017 11:33:04 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170714: (40 commits) s390x/gdb: add gs registers s390x/arch_dump: also dump guarded storage control block s390x/kvm: enable guarded storage s390x/kvm: Enable KSS facility for nested virtualization s390x/cpumodel: add esop/esop2 to z12 model s390x/cpumodel: we are always in zarchitecture mode s390x/cpumodel: wire up new hardware features s390x/flic: migrate ais states s390x/cpumodel: add zpci, aen and ais facilities s390x: initialize cpu firstly pc-bios/s390: rebuild s390-ccw.img pc-bios/s390: add s390-netboot.img pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load pc-bios/s390-ccw: Add virtio-net driver code pc-bios/s390-ccw: Add core files for the network bootloading program roms/SLOF: Update submodule to latest status pc-bios/s390-ccw: Add code for virtio feature negotiation pc-bios/s390-ccw: Remove unused structs from virtio.h pc-bios/s390-ccw: Move byteswap functions to a separate header pc-bios/s390-ccw: Add a write() function for stdio ... Conflicts: target/s390x/kvm.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Thomas Huth
|
4bfd755ff3 |
roms/SLOF: Update submodule to latest status
We need the latest fixes for building the libc and libnet of SLOF for the s390-ccw network bootloader firmware. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1499863793-18627-9-git-send-email-thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> |
||
|
Mark Cave-Ayland
|
abcea034a0 |
Update OpenBIOS images to fbc1b4a built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
415c382483 |
Update OpenBIOS images to 3ebaaa2 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
0806b30c8d |
Add QemuMacDrivers as submodule
The QemuMacDrivers project provides virtualisation drivers for PPC MacOS guests. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Paolo Bonzini
|
c8c33fca88 |
sgabios: update for "fix wrong video attrs for int 10h,ah==13h"
Update the submodule and rebuild the binary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Mark Cave-Ayland
|
e0a31457e1 |
Update OpenBIOS images to 04898e8 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
111308e789 |
Update OpenBIOS images to f233c3f built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexey Kardashevskiy
|
a438fa121f |
pseries: Update SLOF firmware image
Various fixes in this update, the full list is: > qemu-bootlist: Take the "-boot strict=off" setting properly into account > virtio-scsi: initialize vring avail queue buffers > virtio: Remove global variables in block and 9p driver > Remove superfluous checkpoints in tree.fs > Provide "write" function in the disk-label package > virtio: Implement block write support > scsi: Add SCSI block write support > deblocker: Add a 'write' function > virtio-scsi: Fix descriptor order for SCSI WRITE commands > board-qemu: Add a possibility to use hvterm input instead of USB keyboard > Do not try to use virtio-gpu in VGA mode > virtio: Fix stack comment of virtio-blk-read > envvar: Do not read default values for /options from the NVRAM anymore > envvar: Set properties in /options during "(set-defaults)" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Peter Maydell
|
4bc0d39a2f |
Update OpenBIOS images
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJYtfUHAAoJEFvCxW+uDzIfq9AH/0C9dbWzFABXr2Oflv7Xm70Q qz6XzGUNAREbvRX4Sh4OGohKAxrWM/5unFIJB2DSyZWfZug3XL6qEoElPgsgzcT0 q+N/MoLIwdW29qgls9Sl6qFkZLLx7WVWJPIFZ/SW5/9jrsOauid42vmoUXCU6o8c vzvSjlgwyoPP7nYkSGJznIqicU1OWSDISE/kzatiIKM0iFovp8RuyRnUJ8a/vybJ LvSWyOjY8xDAeaa9LXqDCYGhXYanyQtNqSfiKylOTS6yo3cmKD7zp79wkNlhQ+yS sojcH0F48fhsRCYbCabodaQfeXbOYJB72n1GfSrd36D84TdBCBvyipewJdZjiPQ= =5qjX -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging Update OpenBIOS images # gpg: Signature made Tue 28 Feb 2017 22:09:11 GMT # gpg: using RSA key 0x5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-signed: Update OpenBIOS images to 0cd97cc built from submodule. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Mark Cave-Ayland
|
9b40d1ee13 |
Update OpenBIOS images to 0cd97cc built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
8779fccbef |
seabios: update to 1.10.2 release
git shortlog rel-1.10.1..rel-1.10.2
===================================
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Kevin O'Connor (1):
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Paul Menzel (1):
vgasrc: Increase debug level
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
06c33754a1 |
Update OpenBIOS images to ef8a14e built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
cae41fda0f |
seabios: update to 1.10.1 stable release
git shortlog rel-1.10.0..rel-1.10.1
===================================
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Richard Henderson
|
dfbd2768b2 |
target-alpha: Update palcode for smp
Signed-off-by: Richard Henderson <rth@twiddle.net> |
||
|
Gerd Hoffmann
|
423f7cf233 |
ipxe: update to 20161108 snapshot
git shortlog 04186319..b991c67c
===============================
Laszlo Ersek (3):
[efi] Install the HII config access protocol on a child of the SNP handle
[librm] Conditionalize the workaround for the Tivoli VMM's SSE garbling
[build] Disable TIVOLI_VMM_WORKAROUND in the qemu configuration
Lukas Grossar (1):
[intel] Add PCI device ID for I219-V/LM
Michael Brown (57):
[efi] Fix uninitialised data in HII IFR structures
[bios] Do not enable interrupts when printing to the console
[pxe] Disable interrupts on the PIC before starting NBP
[dhcp] Allow for variable encapsulation of architecture-specific options
[dhcpv6] Include RFC5970 client architecture options in DHCPv6 requests
[dhcpv6] Include vendor class identifier option in DHCPv6 requests
[dhcp] Automatically generate vendor class identifier string
[xfer] Send intf_close() if redirection fails
[downloader] Treat redirection failures as fatal
[iscsi] Treat redirection failures as fatal
[debug] Allow per-object runtime enabling/disabling of debug messages
[debug] Allow debug messages to be initially disabled at runtime
[libc] Allow assertions to be globally enabled or disabled
[profile] Allow profiling to be globally enabled or disabled
[rng] Check for functioning RTC interrupt
[acpi] Add support for ACPI power off
[acpi] Allow time for ACPI power off to take effect
[ipv4] Send gratuitous ARPs whenever a new IPv4 address is applied
[intel] Strip spurious VLAN tags received by virtual function NICs
[intel] Remove duplicate intelvf_mbox_queues() function
[ipv6] Perform SLAAC only during autoconfiguration
[settings] Create space for IPv6 in settings display order
[ipv6] Rename ipv6_scope to dhcpv6_scope
[settings] Correctly mortalise autovivified child settings blocks
[ipv6] Allow settings to comprise arbitrary subsets of NDP options
[ipv6] Expose IPv6 settings acquired through NDP
[dhcpv6] Expose IPv6 address setting acquired through DHCPv6
[ipv6] Expose IPv6 link-local address settings
[settings] Allow settings blocks to specify a sibling ordering
[ipv6] Match user expectations for IPv6 settings priorities
[ipv6] Create routing table based on IPv6 settings
[ipv6] Rename ipv6_scope to ipv6_settings_scope
[test] Update IPv6 tests to use okx()
[ipv6] Allow for multiple routers
[hyperv] Use instance UUID in device name
[crypto] Remove obsolete extern declaration for asn1_invalidate_cursor()
[crypto] Allow for parsing of partial ASN.1 cursors
[image] Add image_asn1() to extract ASN.1 objects from image
[crypto] Add DER image format
[crypto] Add PEM image format
[image] Use image_asn1() to extract data from CMS signature images
[build] Remove obsolete explicit object requirements
[crypto] Enable both DER and PEM formats by default
[build] Remove more obsolete explicit object requirements
[pixbuf] Enable PNG format by default
[crypto] Add image_x509() to extract X.509 certificates from image
[crypto] Generalise X.509 "valid" field to a "flags" field
[list] Add list_next_entry() and list_prev_entry()
[crypto] Expose certstore_del() to explicitly remove stored certificates
[crypto] Allow certificates to be marked as having been added explicitly
[crypto] Add certstat() to display basic certificate information
[cmdline] Add certificate management commands
[crypto] Mark permanent certificates as permanent
[efi] Mark AppleNetBoot.h as a native iPXE header
[efi] Update to current EDK2 headers
[efi] Add EFI_BLOCK_IO2_PROTOCOL header and GUID definition
[bzimage] Fix page alignment of initrd images
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
625ed4be4b |
Update OpenBIOS images to 1dc4f16 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Peter Maydell
|
66a77ea676 |
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3Z5V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
||
|
Cédric Le Goater
|
bcad45de6a |
ppc: add skiboot firmware for the pnv platform
This is the initial image of skiboot 5.3.7 (commit 762d0082) for the PowerPC PowerNV (Non-Virtualized) platform. Built from submodule. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Alexey Kardashevskiy
|
f77d4ff850 |
pseries: Update SLOF firmware image to 20161019
The main changes are: * virtio-serial * booting speed imrovement * better PCI bridge support The complete changelog is: > virtio-serial: Fix compile error > scsi: Remove debug functions from scsi-loader.fs > scsi: Remove unused read-6 command > obp-tftp: Remove the ciregs-buffer > libnet: Simplify the net-load arguments passing > libnet: Simplify the Forth-to-C wrapper of ping() > Do not link libnet to net-snk anymore, and remove net-snk from board-qemu > Add a Forth-to-C wrapper for the ping command, too > Link libnet code to Paflof and add a wrapper for netboot() > Remember execution tokens of "write" and "read" for socket operations > Add virtio-serial device support > Generalize output banner write routine > Improve indentation in OF.fs > scsi: implement READ (16) command > rtas: Improve rtas-do-config-@ and rtas-do-config-! a little bit > libnet: Make netapps.h includable from .code files > libnet: Remove unused prototypes from netapps.h > libnet: Fix the printout of the ping command > libnet: Make sure to close sockets when we're done > scsi: implement read-capacity-16 > pci: Fix secondary and subordinate PCI bus enumeration with board-qemu > pci-phb: Fix stack underflow in phb-pci-walk-bridge > paflof: Add a read() function to read keyboard input > paflof: Add socket(), send() and recv() functions to paflof > paflof: Provide get_timer() and set_timer() helper functions > paflof: Add a write_mm_log helper function > paflof: Copy sbrk code from net-snk > paflof: Use CFLAGS from make.rules instead of completely redefining them > Do not include the FCode evaluator by default anymore > Source code beautification of board-qemu/slof/pci-interrupts.fs > Allow PCI devices in PCI bridge slots greater than 4 > Fix bad interrupt pin numbering in interrupt-map property of PCI bridges > Improve SLOF_alloc_mem_aligned() > instance: Fix set-my-args for empty arguments > Fix remaining compiler warnings in sloffs.c > Remove misleading padding fields from ROM header definition > Improve indentation in calculatecrc.h > Do not include calculatecrc.h from assembler files > Remove unused defines in calculatecrc.h > libnet: Re-initialize global variables at the beginning of tftp() > Remove dependency on cpu/@0 for booting > usb: Set XHCI slot speed according to port status > usb: Build correct route string for USB3 devices behind a hub > usb: Initialize USB3 devices on a hub and keep track of hub topology > usb: Increase amount of maximum slot IDs and add a sanity check > usb: Move XHCI port state arrays from header to .c file > tools: add copy functionality > tools: added support to sloffs to read from /dev/slof_flash > tools: added file append functionality > tools: use crc checking code from romfs/tools > tools: added initial version of sloffs > romfs: factored out crc code, to make it usable from other locations > tools: remove unused parts from the Makefile > usb-hid: Fix non-working comma key > fat-files: Fix access to FAT32 dir/files when cluster > 16-bits > virtio-net: fix ring handling in receive > net: Remove remainders of the MTFTP code > net: Move also files from clients/net-snk/app/netapps/ to lib/libnet/ > net: Move files from clients/net-snk/app/netlib/ to lib/libnet/ > net-snk: Get rid of netlib and netapps prefixes in include statements > usb-xhci: assign field4 before conditional > Improve F12 key handling in boot menu > Fix stack underflow that occurs with duplicated ESC in input > rtas-nvram: optimize erase > ipv6: Replace magic number 1500 with ETH_MTU_SIZE (i.e. 1518) > ipv6: Fix NULL pointer dereference in ip6addr_add() > ipv6: Fix memory leak in set_ipv6_address() / ip6_create_ll_address() > ipv6: Clear memory after malloc if necessary > ipv6: Fix possible NULL-pointer dereference in send_ipv6() > ping: use gateway address for routing > ping: add netmask in the ping argument > xhci: fix missing keys from keyboard > xhci: add memory barrier after filling the trb > loaders: Remove netflash command > boot: Remove legacy Forth words for network loading > base: Move cnt-bits and bcd-to-bin to board-js2x folder > base: Move huge-tftp-load variable to obp-tftp package > base: Remove unused IP address conversion functions > virtio: White space cleanup in virtio-9p.c > virtio: Add modern version 1.0 support to 9p driver > virtio: Set a proper name for virtio-9p device tree nodes > pci: Fix mistype in "unkown-bridge" > ipv6: Indent code with tabs, not with spaces > ipv6: send_ipv6() has to return after doing NDP > ipv6: Do not use unitialized MAC address array > ipv6: Add support for sending packets through a router > Remove unused sms code. > virtio-net: initialize to populate mac address > libbootmsg: Do not use '\b' characters when printing checkpoints > dev-null: The "read" function has to return 0 if nothing has been read Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Gerd Hoffmann
|
6e99f5741f |
seabios: update to 1.10.0 release.
New in this release:
===================
* Initial support for Trusted Platform Module (TPM) version 2.0
* Several USB XHCI timing fixes on real hardware
* Support for "LSI MPT Fusion" scsi controllers on QEMU
* Support for virtio devices mapped above 4GB
* Several bug fixes and code cleanups
git shortlog rel-1.9.3..rel-1.10.0
==================================
Alex Williamson (1):
fw/pci: Add support for mapping Intel IGD via QEMU
Cao jin (1):
Fix comment typo
Cole Robinson (1):
biostables: Support SMBIOS 2.6+ UUID format
Dana Rubin (2):
pvscsi: Fix incorrect arguments order in call to memalign_low
pvscsi: Use high memory for rings
Don Slutz (1):
Support for booting from LSI Logic LSI53C1030, SAS1068, SAS1068e
Gerd Hoffmann (4):
ahci: set transfer mode according to the capabilities of connected drive
virtio: uninline _vp_{read,write}
virtio: pci cfg access
virtio: fix virtio-pci
Haozhong Zhang (1):
fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
Igor Mammedov (3):
paravirt: disable legacy bios tables in case of more than 255 CPUs
add helpers to read etc/boot-cpus at resume time
support booting with more than 255 CPUs
Kevin O'Connor (124):
usb: Allow configuration of sigatt time (in etc/usb-time-sigatt)
xhci: Check for device disconnects during USB2 reset polling
sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
sdcard: fix typo causing 32bit write to 16bit block_size field
sdcard: Enable extra debugging on sdcard_waitw() timeout
acpi_extract: Move main code to new function main()
acpi_extract: Make the generated .hex files more human readable
acpi_extract: Don't generate unused (and empty) q35-acpi-dsdt.hex file
acpi: Don't build SSDT files on every build; store them in git
acpi: Remove build check for iasl
tpm: Move standard definitions from tcgbios.h to new file std/tcg.h
util.h: Minor - HaveRunPost is in misc.c not resume.c
tpm: Add "static" declaration to functions not used outside tcgbios.c
tpm: Move code around in tcgbios.c
tpm: Move error recovery from tpm_extend_acpi_log() to only caller
tpm: Open code tpm_ipl() into callers
tpm: Change tpm_add_measurement() to tpm_add_action()
tpm: Move tpm_add_bootdevice() into callers
tpm: Move tpm_start_option_rom_scan() and tpm_calling_int19h() into callers
tpm: pcpes->event is a variable length array
tpm: Don't pass entry_count around in parameters to/from tpm_extend_acpi_log()
tpm: There is no need to pass pcrindex to hash_log_extend_event()
tpm: Perform hashing separately from logging
tpm: There is no need to pass event_length to hash/extend functions
tpm: Avoid scatter-gather copying in build_and_send_cmd()
tpm: Don't implement scatter-gather in transmit()
tpm: Merge tpm_log_event() and tpm_extend_acpi_log()
tpm: Merge tpm_log_extend_event() and tpm_extend(); extend before logging
xhci: Wait for port enable even for USB3 devices
xhci: Improve port status change debugging
xhci: Disable slot on failed set_address command
nmi: Don't try to switch onto extra stack in NMI handler
scsi: Do not call printf() from scsi_is_ready()
block: Report drive->sectors using "%u" instead of "%d"
tpm: Add banner separating the TCG bios interface code from TCG menu code
tpm: Avoid macro expansion of tpm request / response structs
tpm: Simplify hardware probe and detection checks
tpm: Add wrapper function tpmhw_set_timeouts()
tpm: Move TPM hardware functions from tcgbios.c to hw/tpm_drivers.c
tpm: Rework TPM interface shutdown support
tpm: Simplify tcpa probe
tpm: Introduce tpm_get_capability() helper function
tpm: Eliminate response buffer parameter from build_and_send_cmd()
tpm: Don't return a status from external bios measurement functions
tpm: No need to check the return status of measurements
tpm: Don't call tpm_set_failure() from tpm_log_extend_event()
tpm: Don't use 16bit BIOS return codes in build_and_send_cmd()
tpm: Don't use 16bit BIOS return codes in tpm_log_event()
tpm: Don't use 16bit BIOS return codes in tpmhw_* functions
tpm: Don't use 16bit BIOS return codes in TPM menu functions
usb: Remove usbdev->slotid field
coreboot: Check for unaligned cbfs header
resume: Make KVM soft reboot loop detection more flexible
post: Always set HaveRunPost prior to setting any other global variable
kbd: Don't treat scancode and asciicode as separate values
kbd: Refactor capslock and numlock handling
ehci: Only delay UHCI/OHCI port scan until after EHCI setup completes
usb: Eliminate USB controller setup thread
pci: Add helper functions for internal driver BAR handling
ahci: Convert to new PCI BAR helper functions
ata: Convert to new PCI BAR helper functions
esp-scsi: Convert to new PCI BAR helper functions
lsi-scsi: Convert to new PCI BAR helper functions
megasas: Convert to new PCI BAR helper functions
pvscsi: Convert to new PCI BAR helper functions
sdcard: Convert to new PCI BAR helper functions
ehci: Convert to new PCI BAR helper functions
ohci: Convert to new PCI BAR helper functions
uhci: Convert to new PCI BAR helper functions
xhci: Convert to new PCI BAR helper functions
virtio: Convert to new PCI BAR helper functions
pci: Consistently set pci->have_drivers for devices with internal drivers
pci: Implement '%pP' printf handler for 'struct pci_device' pointers
pci: Move code in pci.c that is specific to pciinit.c to pciinit.c
pci: Split low-level pci code from higher-level 'struct pci_device' code
scsi: Always use MAXDESCSIZE when building drive description
block: Move drive setup to new function block_setup()
tpm: Unify tpm_fill_hash()/tpm_log_extend_event() and use in BIOS interface
docs: Note release date of 1.9.1
build: fix .text section address alignment
tpm: Write logs in TPM 2 format
mpt-scsi: Declare 'int i' outside of for loop for older compilers
block: Move send_disk_op() from block.c to disk.c
disk: Avoid stack_hop() path if already on the extra stack
optionroms: Drop support for CONFIG_OPTIONROMS_DEPLOYED
shadow: Batch PCI config writes
virtio: Use threads when scanning for virtio devices
scsi: Launch a thread when scanning for drives in the scsi drivers
docs: Note release date of 1.9.2
usb-xhci: Remove unused const variables
tcgbios: Remove unused const variable
vgabios: Remove special case of dh==0xff in handle_1013()
vgabios: Don't check for special case of page==0xff on external calls
vgabios: Simplify set_cursor_pos()
docs: Note release date of 1.9.3
vgabios: Simplify scroll logic
blockcmd: CMD_SCSI op is only used in 32bit mode
swcursor: Move swcursor code from vgafb.c to new file swcursor.c
swcursor: Concentrate swcursor logic in swcursor.c
vgafb: Move header definitions from vgabios.h to new file vgafb.h
vgainit: Move video param setup to stdvga_build_video_param()
vgautil: Add new header file with misc function and variable definitions
vgautil: Move generic definitions from stdvga.h to vgautil.h
vgautil: Move definitions from cbvga.h and clext.h to vgautil.h
version: Update header files now that version.c is not auto generated
checkstack: Handle conditional checks at start of functions
tpm: Append to TPM2 log the hashes used for PCR extension
ps2: Remove stale check for timeout warning on reset
pic: The default hardware interrupt handlers should not take a parameter
kbd: Implement 101-key keyboard keycode mapping
kbd: Implement extended keycode mappings for keypad-enter and keypad-/
kbd: Suppress keys without mappings
kbd: Merge bda->kbd_flag0 and bda->kbd_flag1
kbd: Extract out shift flag setting into new function
kbd: Move checking for special keys in __process_keys() into switch
kbd: Ignore fake shift keys
usb-hid: Generate Ctrl+Break and Alt+SysReq keys
kbd: Generate interrupt events for SysReq, PrtScr, and Break
post: Map int 0x05 to entry point
kbd: Move extended and release events out of special key detection switch
build: Be sure to also include out/*.d in Makefile
smp: consolidate CPU APIC ID detection and accounting
build: Add -fno-pie to the gcc flags when available
docs: Note v1.10.0 release
Marcel Apfelbaum (2):
fw/pci: do not automatically allocate IO region for PCIe bridges
fw/pci: add Q35 S3 support
Matt DeVillier (1):
sdcard: skip detection of PCI sdhci controllers if etc/sdcard used
Paolo Bonzini (1):
smp: restore MSRs on S3 resume
Piotr Król (1):
docs: fix various typos and inconsistency
Roger Pau Monne (1):
build: fix typo in buildversion.py
Stefan Berger (34):
tpm: Temporarily deactivate the TPM in case of failure
tpm: Refactor function building TPM commands
tpm: Refactor the parameters being passed to tpm_extend_acpi_log
tpm: Refactor hash_log_event BIOS interface function
tpm: Refactor hash_log_extend_event
tpm: fix compiler warning with older gcc versions
tpm: Drop code using the TPM for sha1
tpm: Set timeouts and durations to microsecond values
tpm: Cache all log related pointers in tpm_state
tpm: Refactor pass_through_to_tpm
tpm: Rename remaining interrupt functions
tpm: Remove check for working TPM from TPM interrupt handler
tpm: Check length parameter of the array
tpm: Add a menu for TPM configuration
tpm: Copy digest into HashLogExentEvent response
tpm: Move assert_physical_presence and dependencies
tpm: Add support for harware physical presence
tpm: Rework the assertion of physical presence
tpm: Remove usage of PP_CMD_ENABLE from all but one place
tpm: Do not set TPM in failure mode if menu command fails
tpm: Extend TPM TIS with TPM 2 support.
tpm: Factor out tpm_extend
tpm: Prepare code for TPM 2 functions
tpm: Implement tpm20_startup and tpm20_s3_resume
tpm: Implement tpm20_set_timeouts
tpm: Implement tpm20_prepboot
tpm: Implement tpm20_extend
tpm: Implement tpm20_menu
tpm: Implement TPM 2's tpm_set_failure part
tpm: Filter TPM commands in passthrough API
tpm: Retrieve the PCR Bank configuration
tpm: Restructure tpm20_extend to use buffer and take hash as parameter
tpm: Refactor tpml_digest_values_sha1 structure
tpm: Extend tpm20_extend to support extending to multiple PCR banks
Zheng Bao (1):
splash: Skip the RGB555 mode
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
a26f7f2cb8 |
Update OpenBIOS images to c5542f2 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
4f194ce819 |
Update OpenBIOS images to e79bca6 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
5cebd885d0 |
Update OpenBIOS images to b747b6a built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
fa3007e7ec |
OpenBIOS: switch over to official OpenBIOS git repo
This update should preserve git history, and switches git.qemu-project.org over to be a mirror of the new official git repo hosted at https://github.com/openbios from a git-svn import of the old coreboot SVN repository. All prior history from the SVN repository should still be preserved (i.e. commit hashes are the same for historical commits). No other source changes are made by this commit since both the old and new HEADs contain the same source tree (albeit with difference metadata) whilst the previous git-svn HEAD can be retrieved via the svn-head branch. Proposed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Peter Maydell
|
60a0f1af07 |
ipxe: update submodule from 4e03af8ec to 041863191
e1000e+vmxnet3: add boot rom -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJXegFqAAoJEEy22O7T6HE4BasP/A3kDhgn6J3dqJN85eVw9jcb 52zxttQuDJBibVKZaSIRiZAnBCTEn5WbUvZ5ZRTt5MVH3Whhv09ZhLfdWUJho9az Dnebv3wqyHg3SlAWFNBE3CjSkHswwIAhTrERqjJqXL2jU2erPAHIdTzprx1LdGc7 hKxNy9tPHjyEeGWLUWrTCIC/YcTNkIp1gdSNcVIQ8TbEHIqo0vSK1Jyl429GYVYD bZO6VbX5D/QAEHs6a+Twf5lFnLZ4hlplm+9SbfjsfaVocx/+D5VtMD0AgYukR60M sHNKqzRimHsLQoz1PV4z9+ZexRDdge4y0eNlVHM8XdXYq0AHybv2/MYW6DHBAXaE nayEPPrwNnOVnE95Xgn03CtpddbQ2hAUXObm8gm6aAJEpXh8SeL7YLAYrYJtF5Oq cpB0ks0zDZZRPAr/c0gy075IbB3ITGUcphFid9lpn5ork/YYD/y5//GVB22IrOvQ qT0IXtmL7OA71i7XOvxYejdTWcArpzgWnOXmh7eVjumxDicC+B3JIORZutKaXHDu w9LFnz5l1DyIM0nLEJb2onP4lXRlYdyeiSHjQi4HH6fLEqZERfKlWvftRiE7agGq nt6QaFFeSXqaaDOjfmPFLF2RmIgTHzit279WcWGUQXkbWKvQSCgRB26LBGZ6kFB2 Z1lTOF1b2zUjpKEsuFH2 =zaj0 -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/kraxel/tags/pull-ipxe-20160704-1' into staging ipxe: update submodule from 4e03af8ec to 041863191 e1000e+vmxnet3: add boot rom # gpg: Signature made Mon 04 Jul 2016 07:25:46 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ipxe-20160704-1: build: add pc-bios to config-host.mak deps ipxe: add new roms to BLOBS ipxe: update prebuilt binaries vmxnet3: add boot rom e1000e: add boot rom ipxe: add vmxnet3 rom ipxe: add e1000e rom ipxe: update submodule from 4e03af8ec to 041863191 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Gerd Hoffmann
|
3b1154fff1 |
Revert "bios: Add fast variant of SeaBIOS for use with -kernel on x86."
This reverts commit
|
||
|
Gerd Hoffmann
|
ea996ebd65 |
seabios: update 128k config
Turn off mpt-scsi and bootsplash to keep size below 128k. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Richard W.M. Jones
|
4e04ab6a63 |
bios: Add fast variant of SeaBIOS for use with -kernel on x86.
This commit adds a fast variant of SeaBIOS called 'bios-fast.bin'. It's designed to be the fastest (also the smallest, but that's not the main aim) SeaBIOS that is just enough to boot a Linux kernel using the -kernel option on i686 and x86_64. This commit does not modify the -kernel option to use this. You have to specify it by doing something like this: -kernel vmlinuz -bios bios-fast.bin Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
8692aa2979 |
seabios: update submodule from 1.9.1 to 1.9.3
git shortlog
============
Alex Williamson (1):
fw/pci: Add support for mapping Intel IGD via QEMU
Haozhong Zhang (1):
fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
Kevin O'Connor (1):
build: fix .text section address alignment
Marcel Apfelbaum (1):
fw/pci: add Q35 S3 support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Gerd Hoffmann
|
4d9dc8b7a8 |
ipxe: add vmxnet3 rom
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
c9c3dc5f4b |
ipxe: add e1000e rom
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
ffdc5a2bce |
ipxe: update submodule from 4e03af8ec to 041863191
shortlog
========
Andrew Widdersheim (1):
[netdevice] Add "ifname" setting
Carl Henrik Lunde (1):
[vmxnet3] Avoid completely filling the TX descriptor ring
Christian Hesse (2):
[golan] Fix build error on some versions of gcc
[ath9k] Fix buffer overrun for ar9287
Christian Nilsson (2):
[intel] Add PCI device ID for another I219-V
[intel] Add PCI device ID for another I219-LM
Hummel Frank (1):
[intel] Add INTEL_NO_PHY_RST for I218-LM
Kyösti Mälkki (1):
[intel] Add PCI IDs for i210/i211 flashless operation
Ladi Prosek (6):
[pci] Add pci_find_next_capability()
[virtio] Add virtio 1.0 constants and data structures
[virtio] Add virtio 1.0 PCI support
[virtio] Add virtio-net 1.0 support
[virtio] Renumber virtio_pci_region flags
[virtio] Fix virtio-pci logging
Leendert van Doorn (2):
[tg3] Fix address truncation bug on 64-bit machines
[tg3] Add missing memory barrier
Michael Brown (287):
[settings] Re-add "uristring" setting type
[dhcp] Do not skip ProxyDHCPREQUEST if next-server is empty
[efi] Add definitions of GUIDs observed when booting shim.efi and grub.efi
[efi] Mark EFI debug transcription functions as __attribute__ (( pure ))
[efi] Remove raw EFI_HANDLE values from debug messages
[efi] Include installed protocol list in unknown handle names
[efi] Improve efi_wrap debugging
[pxe] Construct all fake DHCP packets before starting PXE NBP
[efi] Add definitions of GUIDs observed when booting wdsmgfw.efi
[efi] Fix debug directory size
[efi] Populate debug directory entry FileOffset field
[build] Search for ldlinux.c32 separately from isolinux.bin
[tcpip] Allow supported address families to be detected at runtime
[efi] Allow calls to efi_snp_claim() and efi_snp_release() to be nested
[efi] Fix order of events on SNP removal path
[efi] Do not return EFI_NOT_READY from our ReceiveFilters() method
[pxe] Populate ciaddr in fake PXE Boot Server ACK packet
[uri] Generalise tftp_uri() to pxe_uri()
[efi] Implement the EFI_PXE_BASE_CODE_PROTOCOL
[usb] Expose usb_find_driver()
[usb] Add function to device's function list before attempting probe
[efi] Add USB headers and GUID definitions
[efi] Allow efidev_parent() to traverse multiple device generations
[efi] Add a USB host controller driver based on EFI_USB_IO_PROTOCOL
[tcpip] Avoid generating positive zero for transmitted UDP checksums
[usb] Generalise zero-length packet generation logic
[ehci] Do not treat zero-length NULL pointers as unreachable
[ehci] Support arbitrarily large transfers
[xhci] Support arbitrarily large transfers
[efi] Provide efi_devpath_len()
[efi] Include a copy of the device path within struct efi_device
[usb] Select preferred USB device configuration based on driver score
[usb] Allow for wildcard USB class IDs
[efi] Expose unused USB devices via EFI_USB_IO_PROTOCOL
[ncm] Support setting MAC address
[build] Remove dependency on libiberty
[efi] Minimise use of iPXE header files when building host utilities
[pxe] Invoke INT 1a,564e when PXE stack is activated
[pxe] Notify BIOS via INT 1a,564e for each new network device
[efi] Work around broken 32-bit PE executable parsing in ImageHlp.dll
[efi] Avoid infinite loops when asked to stop non-existent devices
[efi] Expose an UNDI interface alongside the existing SNP interface
[malloc] Avoid integer overflow for excessively large memory allocations
[peerdist] Avoid NULL pointer dereference for plaintext blocks
[http] Verify server port when reusing a pooled connection
[efi] Reset root directory when installing EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
[efi] Update to current EDK2 headers
[efi] Import EFI_HII_FONT_PROTOCOL definitions
[fbcon] Allow character height to be selected at runtime
[fbcon] Move margin calculations to fbcon.c
[console] Tidy up config/console.h
[build] Generalise CONSOLE_VESAFB to CONSOLE_FRAMEBUFFER
[efi] Add support for EFI_GRAPHICS_OUTPUT_PROTOCOL frame buffer consoles
[dhcp] Reset start time when deferring discovery
[dhcp] Limit maximum number of DHCP discovery deferrals
[comboot] Reset console before starting COMBOOT executable
[intel] Forcibly skip PHY reset on some models
[intel] Correct definition of receive overrun bit
[infiniband] Add definitions for FDR and EDR link speeds
[infiniband] Add qword accessors for ib_guid and ib_gid
[pci] Add definitions for PCI Express function level reset (FLR)
[bitops] Fix definitions for big-endian devices
[smsc95xx] Add driver for SMSC/Microchip LAN95xx USB Ethernet NICs
[bitops] Provide BIT_QWORD_PTR()
[efi] Add %.usb target for building EFI-bootable USB (or other) disk images
[usb] Use port->disconnected to check for disconnected devices
[usb] Record USB device speed separately from current port speed
[usb] Allow USB device IDs to include arbitrary driver-specific data
[usb] Allow additional settling time for out-of-spec hubs
[acm] Add support for CDC-ACM (aka USB RNDIS) devices
[xhci] Ensure that zero-length packets are not part of a TRB chain
[efi] Centralise EFI file system info GUIDs
[build] Allow extra objects to be included in an all-drivers build
[bios] Add support for injecting keypresses
[settings] Expose SMBIOS settings as global variables
[smsc95xx] Allow for multiple methods for obtaining the MAC address
[crypto] Dual-license selected DRBG files
[smsc95xx] Fetch MAC from SMBIOS OEM string for Honeywell VM3
[crypto] Dual-license more selected DRBG files
[vmware] Expose GuestRPC mechanism in 64-bit builds
[romprefix] Report an optimistic runtime size estimate
[usb] Add support for numeric keypad on USB keyboards
[http] Handle relative redirection URIs
[image] Provide image_set_uri() to modify an image's URI
[downloader] Update image URI in response to a redirection
[tftp] Do not change current working URI when TFTP server is cleared
[infiniband] Profile post work queue entry operations
[pxe] Colourise debug output
[pxe] Add debug message to display real-mode segment addresses
[i386] Add check_bios_interrupts() debug function
[debug] Allow debug colourisation to be disabled
[stp] Fix incorrectly disambiguated errors
[build] Add named configuration for public cloud environments
[smsc95xx] Enable LEDs
[usb] Allow USB endpoints to specify a reserved header length for refills
[smsc95xx] Reserve headroom in received packets
[autoboot] Fix incorrect boolean logic
[uri] Avoid potentially large stack allocation
[ocsp] Avoid including a double path separator in request URI
[tftp] Mangle initial slash on TFTP URIs
[uri] Apply URI decoding for all parsed URIs
[tcp] Guard against malformed TCP options
[slam] Avoid potential division by zero
[ath9k] Remove broken ath_rxbuf_alloc()
[ehci] Add extra debugging information
[malloc] Guard against unsigned integer overflow
[iobuf] Improve robustness of I/O buffer allocation
[pxe] Clarify comments regarding shrinking of cached DHCP packet
[efi] Add missing definitions for function key scancodes
[prefix] Pad .text16 and .data16 segment sizes at build time
[libc] Split rmsetjmp() and rmlongjmp() into a separate rmsetjmp.h
[bios] Use intptr_t when casting .text16 function pointers
[bios] Use size_t when casting _text16_memsz and _data16_memsz
[bios] Allow relocate.c to be compiled for x86_64
[bios] Allow rtc_entropy.c to be compiled for x86_64
[bios] Allow bzimage.c to be compiled for x86_64
[bios] Allow bios_console.c to be compiled for x86_64
[bios] Allow memmap.c to be compiled for x86_64
[bios] Allow librm to be compiled for x86_64
[bios] Move isolinux definitions to Makefile.pcbios
[bios] Add bin-x86_64-pcbios build platform
[librm] Discard argument as part of return from prot_call()
[librm] Discard argument as part of return from real_call()
[prefix] Align INT 15,88 temporary decompression area to a page boundary
[romprefix] Align PMM temporary decompression area to a page boundary
[bios] Make uses of REAL_CODE() and PHYS_CODE() 64-bit clean
[librm] Use garbage-collectable section names
[bios] Use an 8kB stack for x86_64
[prefix] Use garbage-collectable section names
[librm] Simplify definitions for prot_call() and real_call() stack frames
[prefix] Standardise calls to prot_call()
[librm] Convert prot_call() to a real-mode near call
[librm] Provide an abstraction wrapper for prot_call
[librm] Transition to protected mode within init_librm()
[relocate] Preserve page alignment during relocation
[librm] Prepare for long-mode memory map
[librm] Generate page tables for 64-bit builds
[build] Fix building on older versions of binutils
[librm] Add phys_call() wrapper for calling code with physical addressing
[librm] Do not preserve flags unnecessarily
[librm] Mark virt_offset, text16, data16, rm_cs, and rm_ds as constant
[librm] Support userptr_t in 64-bit builds
[librm] Rename prot_call() to virt_call()
[librm] Add support for running in 64-bit long mode
[ioapi] Split ioremap() out to a separate IOMAP API
[librm] Support ioremap() for addresses above 4GB in a 64-bit build
[netdevice] Refuse to create duplicate network device names
[infiniband] Remove concept of whole-device owner data
[infiniband] Avoid multiple calls to ib_cmrc_shutdown()
[infiniband] Add support for performing service record lookups
[infiniband] Assign names to Infiniband devices for debug messages
[infiniband] Use "%#lx" as format specifier for queue pair numbers
[infiniband] Use "%d" as format specifier for LIDs
[infiniband] Use connection's local ID as debug message identifier
[infiniband] Use correct transaction identifier in CM responses
[infiniband] Do not use GRH for local paths
[infiniband] Record multicast GID attachment as part of group membership
[infiniband] Parse MLID, rate, and SL from multicast membership record
[ipoib] Avoid unnecessary path record lookup for broadcast address
[ipoib] Simplify test for received broadcast packets
[infiniband] Allow for the creation of multicast groups
[pcbios] Restrict external memory allocations to the low 4GB
[infiniband] Assign names to CMRC connections
[infiniband] Assign names to queue pairs
[infiniband] Add "ibstat" command
[infiniband] Retrieve GID flag from cached path entries
[ipoib] Resimplify test for received broadcast packets
[ipoib] Increase number of transmit work queue entries
[ifmgmt] Include human-readable error message for configuration failure
[infiniband] Make IPoIB support configurable at build time
[eoib] Add Ethernet over Infiniband (EoIB) driver
[eoib] Silently ignore EoIB heartbeat packets
[eoib] Allow the multicast group to be forcefully created
[eoib] Support non-FullMember gateway devices
[xsigo] Add support for Xsigo virtual Ethernet (XVE) EoIB devices
[efi] Work around broken GetFontInfo() implementations
[tls] Avoid potential out-of-bound reads in length fields
[crypto] Allow for zero-length ASN.1 cursors
[pixbuf] Check for unsigned integer overflow on multiplication
[arp] Validate length of ARP packet
[librm] Do not unconditionally preserve flags across virt_call()
[linda] Use standard readq() and writeq() implementations
[qib7322] Use standard readq() and writeq() implementations
[test] Add missing #include <string.h>
[serial] Add missing #include <string.h>
[3c595] Fix compilation when "char" is unsigned by default
[tg3] Remove x86-specific inline assembly
[efi] Centralise architecture-independent EFI Makefile and linker script
[build] Allow assembler section type character to vary by architecture
[build] Accept CROSS= as a synonym for CROSS_COMPILE=
[efi] Update to current EDK2 headers
[efi] Add processor binding headers for ARM and AArch64
[uri] Support URIs containing only scheme and path components
[uri] Support "file:" URIs describing relative paths
[efi] Provide access to files stored on EFI filesystems
[build] Remove long-obsolete header file
[pseudobit] Rename bitops.h to pseudobit.h
[bitops] Add generic atomic bit test, set, and clear functions
[hyperv] Use generic set_bit() function
[xen] Use generic test_and_clear_bit() function
[test] Move i386-specific tests to arch/i386/tests
[efi] Move architecture-independent EFI prefixes to interface/efi
[libc] Allow container_of() to be used on volatile pointers
[ipoib] Allow external code to identify IPoIB network devices
[hermon] Add missing iounmap()
[arbel] Add missing iounmap()
[linda] Add missing iounmap()
[qib7322] Add missing iounmap()
[crypto] Allow trusted certificates to be stored in non-volatile options
[hermon] Allocate space for GRH on UD queue pairs
[arbel] Allocate space for GRH on UD queue pairs
[infiniband] Allow drivers to override the eIPoIB LEMAC
[build] Do not use "objcopy -O binary" for objects with relocation records
[gdb] Add support for x86_64
[int13] Allow drive to be hooked using the natural drive number
[int13] Allow default drive to be specified via "san-drive" setting
[3c5x9] Avoid use of sleep() in driver code
[etherfabric] Avoid use of sleep() in driver code
[hermon] Fix received packet length
[arbel] Fix received packet length
[libc] Make sleep() interruptible
[pxe] Implicitly open network device in PXENV_UDP_OPEN
[prefix] Use CRC32 to verify each block prior to decompression
[crypto] Allow cross-certificate source to be configured at build time
[iscsi] Include DHCP server address in iBFT
[netdevice] Return ENOENT for an unknown bus type
[linda] Validate payload length
[qib7322] Validate payload length
[test] Update snprintf_ok() to use okx()
[libc] Print "<NULL>" for wide-character NULL strings
[efi] Work around broken EFI HII specification
[comboot] Support COMBOOT in 64-bit builds
[ethernet] Make LACP support configurable at build time
[libc] Allow CPU architectures to use unoptimised string functions
[libgcc] Provide symbol to handle gcc's implicit calls to memset()
[image] Skip misleading "format not recognised" error message
[librm] Reduce real-mode stack consumption in virt_call()
[tg3] Fix _tg3_flag() for 64-bit builds
[librm] Preserve FPU, MMX and SSE state across calls to virt_call()
[efi] Eliminate use of libbfd
[build] Remove unnecessary dependency on zlib
[tcpip] Do not fall back to using unoptimised TCP/IP checksumming
[efi] Use a timer event to generate the currticks() timer
[efi] Generalise EFI entropy generation to non-x86 CPUs
[sis190] Fix building with GCC 6
[skge] Fix building with GCC 6
[golan] Fix building with GCC 6
[ath] Fix building with GCC 6
[legacy] Fix building with GCC 6
[libgcc] Provide __divmoddi4()
[bitops] Fix typo in test case
[arm] Add support for 32-bit ARM
[arm] Avoid instruction references to symbols defined via ".equ"
[arm] Split out 32-bit-specific code to arch/arm32
[arm] Add support for 64-bit ARM (Aarch64)
[efi] Allow for building with older versions of elf.h system header
[libc] Avoid implicit assumptions about potentially-optimised memcpy()
[arm] Add optimised string functions for 64-bit ARM
[arm] Add optimised TCP/IP checksumming for 64-bit ARM
[efi] Guard against GetStatus() failing to return a NULL TX buffer
[arm] Use CNTVCT_EL0 as profiling timestamp
[undi] Work around broken HP EliteBook 745 G3 PXE ROM
[pci] Add support for PCI Enhanced Allocation
[settings] Extend numerical setting tags to "unsigned long"
[netdevice] Fix failure path in register_netdev()
[lotest] Add option to use broadcast packets for loopback testing
[http] Ignore unrecognised "Connection" header tokens
[efi] Work around broken UEFI keyboard drivers
[axge] Add driver for ASIX 10/100/1000 USB Ethernet NICs
[arm] Use correct DHCP client architecture values
[dhcp] Fix definitions for x86_64 and EFI BC client architectures
[efi] Expose DHCP packets via the Apple NetBoot protocol
[libc] Always use a non-zero seed for the (non-crypto) RNG
[pci] Support systems with multiple PCI root bridges
[http] Accept headers with no whitespace following the colon
[tcp] Send TCP keepalives on idle established connections
[time] Allow system clock to be adjusted at runtime
[ntp] Add simple NTP client
[cmdline] Add "ntp" command
[thunderx] Add driver for Cavium ThunderX SoC NICs
[thunderx] Fix channel configuration for VNICs 1-7
[efi] Include VLAN in SNP device path if applicable
[thunderx] Retrieve base MAC address via EFI_THUNDER_CONFIG_PROTOCOL
[smsc75xx] Allow up to 100ms for reset to complete
[efi] Report failures to stop the EFI timer tick event
[efi] Do not copy garbage bytes into SNP device path MAC address
[thunderx] Fix compilation with older versions of gcc
Mika Tiainen (1):
[intel] Add INTEL_NO_PHY_RST for another I218-LM variant
Suresh Sundriyal (1):
[pool] Fix check for reopenable pooled connections
Torgeir Wulfsberg (1):
[intel] Add INTEL_NO_PHY_RST for I217-LM
Vinson Lee (2):
[mucurses] Fix GCC 6 nonnull-compare errors
[build] Remove nested "my" declaration
Wissam Shoukair (3):
[golan] Add Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support
[mlx_icmd] Fix compilation error in GCC versions newer than 4.6.4
[golan] Add missing iounmap()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
afc474863f |
Update OpenBIOS images
Update OpenBIOS images to SVN r1395 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
fee5b753ff |
seabios: update to 1.9.1 stable release
git shortlog rel-1.9.0..rel-1.9.1
=================================
Cole Robinson (1):
biostables: Support SMBIOS 2.6+ UUID format
Kevin O'Connor (7):
xhci: Check for device disconnects during USB2 reset polling
xhci: Wait for port enable even for USB3 devices
sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
sdcard: fix typo causing 32bit write to 16bit block_size field
nmi: Don't try to switch onto extra stack in NMI handler
scsi: Do not call printf() from scsi_is_ready()
coreboot: Check for unaligned cbfs header
Marcel Apfelbaum (1):
fw/pci: do not automatically allocate IO region for PCIe bridges
Roger Pau Monne (1):
build: fix typo in buildversion.py
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
2d4846bd7b |
Update OpenBIOS images
Update OpenBIOS images to SVN r1391 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexey Kardashevskiy
|
4f7ab0cdbc |
pseries: Update SLOF firmware image to 20160223
The main change is virtio 1.0 support.
The complete changelog is:
> dhcp: fix warning messages when calling strtoip()
> virtio-scsi: enable virtio 1.0
> virtio-scsi: use virtio_fill desc api
> virtio-scsi: use idx during initialization
> virtio-net: enable virtio 1.0
> virtio-blk: enable virtio 1.0
> virtio: 1.0 helper to read 16/32/64 bit value
> virtio: add and enable 1.0 device setup
> virtio: 1.0 guest features negotiation
> virtio: update features set/get register accessor
> virtio: make all virtio apis 1.0 aware
> virtio: add 64-bit virtio helpers for 1.0
> virtio: add virtio 1.0 related struct and defines
> virtio: get rid of type variable in virtio_device
> virtio-net: move setup-mac to the open routine
> virtio-net: make net_hdr_size a variable
> virtio-net: replace vq array with vq_{tx,rx}
> virtio-net: use virtio_fill_desc
> virtio-{net,blk,scsi,9p}: use status variable
> virtio-blk: add helpers for filling descriptors
> virtio-{blk,9p}: enable resetting the device
> virtio: introduce helper for initializing virt queue
> virtio: fix code style/design issues.
> fix code style in byteorder.h
> pci: add byte read/write helper routines
> virtio-net: fix gcc warnings (-Wextra)
> virtio-blk: fix gcc warnings (-Wextra)
> readme: Add a note about coding style
> dhcp: Remove duplicated strtoip()
> ethernet: Fix gcc warnings
> net-snk: Fix gcc warnings
> net-snk: Fix coding style
> net-snk: Fix memory leak in dhcp6_process_options()
> net-snk: Fix memory leak in ip6_to_multicast_mac() / send_ipv6()
> net-snk: Remove bad NEIGHBOUR_SOLICITATION code in send_ipv6()
> Fix dma-alloc and dma-map-in functions on board-js2x
> net-snk: Allow stateless autoconfig IPv6 addresses with IP_INIT_IPV6_MANUAL
> net-snk: Simplify the ip6_is_multicast() function
> net-snk: Move global variable definition out of the header file
> net-snk: Prefer non-link-local unicast IPv6 addresses if possible
> net-snk: Fix the check for link-local addresses when receiving RAs
> net-snk: Remove junk at the end of IPv6 TFTP ACK and error packets
> Fix format strings in usb-ohci.c
> net-snk: Get rid of junk at the end of sent DHCPv6 packets
> net-snk: Use transaction IDs in DHCPv4, too
> net-snk: Make use of DHCPv6 transaction IDs
> net-snk: Seed the pseudo-random number generator
> libc: Add srand() call
> libc: Fix the rand() function to return non-zero values
> net-snk: Improve printed text when booting via network
> Increase temporary buffer size of ibm,client-architecture-support call
> Move archsupport.fs into board-qemu directory
> boot: stop booting when we encounter HALT
> fat-files: Fix bug with root-entries = 0 on certain FAT32 file systems
> usb: print unhandled descriptor in debug mode
> Improve stack usage with libnvram get_partition function
> Improve stack usage in libnvram environment variable code
> libc: Port vsnprintf back from skiboot
> Move the code for rfill into a separate function
> Rework wrapper for new_nvram_partition() and fix possible bug in there
> Stack optimization in libusb: split up setup_new_device()
> Check for stack overflow in paflof engine
> Clean up pending packet variable in ipv4 code
> Fix tracking of pending outgoing packets when handling ARP replies
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
||
|
Mark Cave-Ayland
|
44c44eceea |
Update OpenBIOS images
Update OpenBIOS images to SVN r1378 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
911a4efd0c |
seabios: fix submodule
Commit "36f96c4 target-i386: Add support to migrate vcpu's TSC rate" updates roms/seabios, appearently by mistake. Revert this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1453460391-7664-1-git-send-email-kraxel@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Haozhong Zhang
|
36f96c4b6b |
target-i386: Add support to migrate vcpu's TSC rate
This patch enables migrating vcpu's TSC rate. If KVM on the destination machine supports TSC scaling, guest programs will observe a consistent TSC rate across the migration. If TSC scaling is not supported on the destination machine, the migration will not be aborted and QEMU on the destination will not set vcpu's TSC rate to the migrated value. If vcpu's TSC rate specified by CPU option 'tsc-freq' on the destination machine is inconsistent with the migrated TSC rate, the migration will be aborted. For backwards compatibility, the migration of vcpu's TSC rate is disabled on pc-*-2.5 and older machine types. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Rewrote comment at kvm_arch_put_registers()] [ehabkost: Moved compat code to pc-2.5] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> |
||
|
Gerd Hoffmann
|
bf864863f6 |
seabios: stop updating aml files
ACPI aml files traditionally have been managed in the seabios repo. In qemu version 2.0 we've switched over to have qemu generate the acpi tables and provide them to the firmware via fw_cfg. The old aml files are still there and used for old machine types. Well, actually the q35 file only, the piix4 version is compiled into seabios (unless built with CONFIG_ACPI_DSDT=n) and is there for reference only. The aml files havn't been touched for a long time, and given that new features requiring acpi changes are typically only added to new machine types this is unlikely to change in the future. So stop updating them. That allows to cleanup things a bit on the seabios side in the future. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
cae7e84eb7 |
seabios: update 128k bios config
Turn off OHCI + TPM support to keep the size below 128k. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
437b8d8c59 |
seabios: use new EXTRAVERSION to tag qemu builds
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
ad30c0b0d8 |
seabios: update submodule to release 1.9.0
Highlights / user visible changes in seabios:
* boot menu key is ESC now.
* virtio 1.0 support.
* sdcard support.
* fw_cfg dma suport.
* usual share of bugfixes ;)
In vgabios:
* Emulates leal instruction. Works around a bug in old x86emu versions,
which makes old xorg vesa drivers work (RHEL-5 for example).
full shortlog rel-1.8.2..rel-1.9.0
----------------------------------
Ameya Palande (1):
x86: add barrier to read{b,w,l} and write{b,w,l} functions
Andreas Färber (1):
checkrom: Fix typo in error message
Chen Fan (1):
pci: enable SERR# for error forwarding in bridge control register
Gerd Hoffmann (28):
vga: simplify vga builds
vga: rework virtio-vga support
vga: add virtio-vga to kconfig
pci: allow to loop over capabilities
virtio: run drivers in 32bit mode
virtio: add struct vp_device
virtio: pass struct pci_device to vp_init_simple
virtio: add version 1.0 structs and #defines
virtio: add version 0.9.5 struct
virtio: find version 1.0 virtio capabilities
virtio: create vp_cap struct for legacy bar
virtio: add read/write functions and macros
virtio: make features 64bit, support version 1.0 features
virtio: add version 1.0 support to vp_{get,set}_status
virtio: add version 1.0 support to vp_get_isr
virtio: add version 1.0 support to vp_reset
virtio: add version 1.0 support to vp_notify
virtio: remove unused vp_del_vq
virtio: add version 1.0 support to vp_find_vq
virtio-scsi: fix initialization for version 1.0
virtio-blk: fix initialization for version 1.0
virtio: use version 1.0 if available (flip the big switch)
virtio: also probe version 1.0 pci ids
virtio: legacy cleanup
virtio-blk: 32bit cleanup
virtio-scsi: 32bit cleanup
virtio-ring: 32bit cleanup
virtio-pci: use high memory for rings
Julius Werner (1):
xhci: Count new Max Scratchpad Bufs bits from XHCI 1.1
Kevin O'Connor (126):
docs: add page for SeaVGABIOS
docs: Add page describing the patch contribution process
docs: Add page on available CBFS/fw_cfg runtime config files
docs: Prefer triple backticks to multiple lines with single backticks
smp: Fix smp race introduced in 0673b787
docs: Note release date of 1.8.1
vgabios: On bda_save_restore() the saved vbe_mode also has flags in it
vgabios: Don't use extra stack if it appears a modern OS is in use
docs: Clarify that pci-optionrom-exec doesn't apply to roms in cbfs
checkstack: Replace function information tuple with class
checkstack: Simplify yield calculations
checkstack: Prefer passing "function" class instead of function address
smbios: Use integer signature instead of string signature
vgabios: Don't use "smsww" instruction - it confuses x86emu
vgabios: Add config option for assembler fixups
vgabios: Emulate "leal" instruction
checkstack: Minor - continue if not a regular asm line
Don't forward declare functions with "inline" in headers
build: Support "make VERSION=xyz" to override the default build version
tcg: Use seabios setup()/prepboot() calling convention for tcg
build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS
bootorder: Update "extra pci root" buses bootorder format to match qemu
Make sure all code checks for malloc failures
docs: Note release date of 1.8.2
block: Split process_op() command dispatch up into multiple functions
block: Introduce default_process_op() with common command handling codes
block: Route scsi style commands through 'struct disk_op_s'
blockcmd: Introduce scsi_fill_cmd()
ata: Handle ATA ATAPI drives directly via 'struct disk_op_s' requests
ahci: Handle AHCI ATAPI drives directly via 'struct disk_op_s' requests
usb-msc: Handle USB drives directly via 'struct disk_op_s' requests
usb-uas: Handle USB drives directly via 'struct disk_op_s' requests
lsi-scsi: Handle LSI drives directly via 'struct disk_op_s' requests
esp-scsi: Handle ESP drives directly via 'struct disk_op_s' requests
megasas: Handle Megasas drives directly via 'struct disk_op_s' requests
virtio-scsi: Handle virtio drives directly via 'struct disk_op_s' requests
pvscsi: Move pvscsi_fill_req() code into pvscsi_cmd()
pvscsi: Handle pvscsi drives directly via 'struct disk_op_s' requests
blockcmd: Remove unused scsi_process_op() and cdb_cmd_data()
blockcmd: Convert cdb_is_read() to scsi_is_read()
block: Rename process_XXX_op() functions to XXX_process_op()
coreboot: Try to auto-detect if the CBFS anchor pointer is a relative pointer
ps2: Support mode for polling the PS2 port instead of using irqs
ata: Make sure "chanid" is relative to PCI device for bootorder file
Don't enable interrupts prior to IVT and PIC setup
ps2: Don't wait 100ms to discard possible extra reset receive byte
timer: Delay timestamp counter init until after pmtimer is probed
timer: Add CONFIG_TSC_TIMER build option to disable the CPU TSC timer
ramdisk: Allow ramdisk support (CONFIG_FLASH_FLOPPY) under QEMU
Minor - move declaration of CDRom_locks to code that uses it
smm: ignore bits 16,18-31 of SMM revision ID at runtime too
vgafb: Minor - move gfx_common() variables outside of switch statement
sdcard: Check if card is present before sending commands to card
sdcard: Implement controller frequency setting according to sdhci spec
sdcard: Make sure controller support 3.3V before enabling it
sdcard: Set timeout control register during init (to max allowed timeout)
sdcard: Improve SD card initialization command sequence
sdcard: Add proper delays during card power up
mptable: Don't create mptable if it is very large
optionroms: Don't run option rom on PCI bar if CBFS/fw_cfg version exists
edd: Pass the segment/offset from int 1348 calls using a 'struct segoff_s'
edd: Reduce parameters to fill_generic_edd()
Move CanInterrupt check to check_irqs()
Call cpu_relax() if yielding prior to interrupts being enabled
sdcard: Fix typo - use sdcard_pio() instead of sdcard_pio_app()
sdcard: Fill command bits according to spec
sdcard: Support SDHCI v3.00 spec clock setting
sdcard: Move power setup to new function sdcard_set_power()
sdcard: Power controller up to maximum voltage supported
sdcard: Power down controller on failure
sdcard: The card should never be in a busy state at start of sdcard_pio()
sdcard: Implement timeout on every block read in sdcard_pio_transfer()
sdcard: Rename waitw() to sdcard_waitw() and simplify
sdcard: Perform a controller reset at start of init
sdcard: Check for error events during sdcard_pio()
sdcard: Initial support for MMC cards
sdcard: Allow the sdcard driver to run on real hardware
rtc: Support disabling the RTC timer irq support
Add minimal support for machines without hardware interrupts
ps2: Eliminate "etc/ps2-poll-only"; use CONFIG_HARDWARE_IRQ instead
sdcard: Allow sdcard addresses to be specified in CBFS files
xhci: Minor - add USB port type comments to xhci_hub_reset()
docs: Don't use an add-symbol-file offset when describing gdb debugging
rtc: Disable NMI in rtc_mask()
sdcard: Move sdcard_set_frequency()/sdcard_set_power() in sdcard.c
sdcard: Move frequency setting into sdcard_card_setup()
sdcard: Move drive registration to sdcard_card_setup()
sdcard: Turn card_type into a bitmap and store if card is MMC type
sdcard: Display sdcard product name in boot menu
sdcard: Obtain card capacity and report it on the boot menu
megasas: Use outl() on MFI_IDB register
minor - correct spelling error in comment
Simplify transition16/32 assembler code
docs: Minor - add "code relocation" link to "Execution and code flow" document
Unify smm/sloppy variants of call32_prep/post and call16_helper
Rename Call32Data to Call16Data
Unify inline assembler in variants of call16 functions
Unify call32_sloppy() and call32()
Use transition32_nmi_off from call32() and call16_back()
Consolidate code16*() functions
Always enable caching on transition32; backup/restore cr0 on call32
e820: Introduce e820_remove() and avoid exporting E820_HOLE
e820: Rename memmap.c to e820map.c and use consistent "e820_" prefix
e820: Update debugging messages to report 64bit values
virtio: Simplify vring alignment code
virtio: Move standard definitions from virtio-ring.h to standard headers
malloc: Use consistent naming for internal low-level "alloc" functions
malloc: Introduce common helper alloc_new_detail()
malloc: Add warning if free() called on invalid memory
malloc: Don't mix virtual and physical addresses
memmap: Introduce SYMBOL() macro to access linker script symbols
build: Rework version generation; don't allow make version override
build: Report gcc and binutils versions in debug log
build: Generate "reproducible" version strings on "clean" builds
stacks: Use macro wrappers for call32() and stack_hop_back()
malloc: Rename csm_malloc_preinit() to malloc_csm_preinit()
build: Be more permissive in buildversion.py tool version scan
docs: Document 'make EXTRAVERSION=xyz' and scripts/tarball.sh
build: Allow official tarball builds to be considered "clean"
coreboot: Minor - avoid K&R style function declaration
biostables: Minor - fix incorrect indentation
virtio: Minor - replace tab characters with space
docs: Minor - replace seavgabios text in Build_overview.md with link
buildversion: Avoid subprocess.check_output() as that requires python2.7
buildversion: Add debugging messages
docs: Note v1.9.0 release
Kyösti Mälkki (1):
PCI SDHCI driver: Fix base address
Magnus Granberg (1):
build: use -fstack-check=no when available
Marc Marí (1):
Add QEMU fw_cfg DMA interface
Marcel Apfelbaum (2):
fw/pci: scan all buses if extraroots romfile is present
fw/pci: map memory and IO regions for multiple pci root buses
Paolo Bonzini (4):
boot.c: delay exiting boot if menu key is ESC
boot: switch default menu key to ESC
smm: ignore bits 16,18-31 of SMM revision ID
smm: fix outl argument order
Paulo Alcantara (1):
ich9: initialise RCBA register through LPC interface
Quan Xu (1):
make SeaBios compatible with Xen vTPM.
Stefan Berger (9):
Add an implementation of a TPM TIS driver
Implementation of the TCG BIOS extensions
Support for BIOS interrupt handler
Add 'measurement' code to the BIOS
tpm: Introduce a #define for command tag
tpm: Be consistent with array sizes in tcgbios.c
tpm: clean up parameters to build_and_send_cmd
tpm: Clean up in tcgbios.h
tpm: Move call to tpm_option_rom into init_optionrom
Stefan Weil (2):
megasas: Fix outw, outl argument order
Fix typos found by codespell
Vladimir Serbinenko (3):
ahci: Ignore max_ports.
Link rom.o with -N option.
Add multiboot support.
tpearson@raptorengineeringinc.com (1):
Add an option to only execute option ROMs contained in CBFS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Alexey Kardashevskiy
|
1210481958 |
pseries: Update SLOF firmware image to qemu-slof-20151103
The changes are: 1. supports recent binutils; 2. 64bit BARs behind PCI bridges supported; 3. Many fixes for USB keyboard support - keys, XHCI; 4. virtio-vga support. This image was built with: gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) GNU ld version 2.23.2 The full changelog is: > version: update to 20151103 > documentation: Add a clause about signing off > qemu/js2x/client: Support binutils >= 2.25.1 > Fix special keys on USB > Fix function keys on USB > pci-scan: program 64-bit mem bar range in pci-bridge bar > Allow to build SLOF on Little Endian host > usb-xhci: add keyboard support > usb-xhci: ready the link trb early > usb-xhci: scan usb high speed ports > usb-xhci: bulk improve event handling loop > usb-xhci: return on allocation failure > usb-xhci: add delay in shutdown path > usb-xhci: event trbs does not need link trb > usb-hid: refactor usb key reading > takeover: Fix header includes > board-js2x: Add missing file dma-function.fs > vga: Add support for virtio-vga > qemu-vga: Use MMIO BAR instead of legacy IO ports > slof: Change call_c() function to a proper assembler function Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Mark Cave-Ayland
|
637016c260 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1353 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexey Kardashevskiy
|
92d7a30cb3 |
pseries: Update SLOF firmware image to qemu-slof-20150813
The changes are: 1. GPT support; 2. Much faster VGA support. The full changelog is: > Add missing half word access case to _FASTRMOVE and _FASTMOVE > Remove unused RMOVE64 stub > fbuffer: Implement RFILL as an accelerated primitive > fbuffer: Implement MRMOVE as an accelerated primitive > fbuffer: Precalculate line length in bytes > terminal: Disable the terminal-write trace by default > boot: remove trailing ":" in the bootpath > ci: implement boot client interface > boot: bootpath should be complete device path > fbuffer: Use a smaller cursor > fbuffer: Improve invert-region helper > usb-hid: Caps is not always shift > cas: Increase FDT buffer size to accomodate larger ibm, cas node properties > README: Update with patch submittion note > disk-label: add support for booting from GPT FAT partition > disk-label: introduce helper to check fat filesystem > introduce 8-byte LE helpers > disk-label: simplify gpt-prep-partition? routine > fbuffer: introduce the invert-region-x helper > fbuffer: introduce the invert-region helper > fbuffer: simplify address computations in fb8-toggle-cursor Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
||
|
Gerd Hoffmann
|
cf2b4b5b77 |
ipxe: use upstream configuration
Upstream supports named configurations now and ships with settings for qemu. Use them, drop our config header copying. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
f927f16213 |
ipxe: don't override GITVERSION
We had build problems due to the git version checking in the ipxe build system in the past. Don't remember the details, but the problem seems to be gone now, so lets remove the workaround. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> [ most likely ipxe commit 6153c09c41034250408f3596555fcaae715da46c: [build] Set GITVERSION only if there is a git repository ] Reviewed-by: Laszlo Ersek <lersek@redhat.com> |
||
|
Gerd Hoffmann
|
d4517d170c |
ipxe: update from 35c53797 to 4e03af8
git shortlog
============
Alex Williamson (1):
[dhcp] Extract timing parameters out to config/dhcp.h
Bernd Wiebelt (1):
[tg3] Add support for BCM57766
Christian Hesse (3):
[intel] Add PCI device IDs for Intel I218-LM and I218-V
[build] Add missing "const" qualifiers
[ath9k] Remove confusing logic inversion in an ANI variable
Christian Nilsson (1):
[bios] Add ANSI blink attribute
Daniel Pieczko (1):
[prefix] Use correct register for KEEP_IT_REAL physical address conversion
Ed Swierk (1):
[intel] Update PCI device IDs for Intel 82599 and X540 10G NICs
Fabrice Bacchella (2):
[efi] Improve NII driver logging
[efi] Work around bugs in Emulex NII driver
Laszlo Ersek (1):
[virtio] Downgrade per-iobuf debug messages to DBGC2
Michael Brown (284):
[device] Provide a driver-private data field for root devices
[iobuf] Add iob_split() to split an I/O buffer into portions
[rndis] Add generic RNDIS device abstraction
[hyperv] Add support for Hyper-V hypervisor
[hyperv] Add support for VMBus devices
[hyperv] Add support for NetVSC paravirtual network devices
[rndis] Send RNDIS_INITIALISE_MSG
[rndis] Send RNDIS_HALT_MSG
[hyperv] Tear down NetVSC RX buffer GPADL after closing VMBus device
[rndis] Clear receive filter when closing the device
[hyperv] Receive all VMBus messages in a poll
[hyperv] Increase TX ring size
[hyperv] Assume that VMBus xfer page ranges correspond to RNDIS messages
[rndis] Ignore start-of-day RNDIS_INDICATE_STATUS_MSG with status 0x40020006
[hyperv] Tidy up debug output
[hyperv] Require support for VMBus version 3.0 or newer
[build] Include Hyper-V driver in the all-drivers build
[pci] Allow drivers to specify a PCI class
[romprefix] Ensure UNDI loader can be included by all ROM types
[usb] Add basic support for USB devices
[usb] Add basic support for USB hubs
[usb] Add support for xHCI host controllers
[ncm] Add support for CDC-NCM USB Ethernet devices
[usb] Report xHCI host controller events
[ncm] Use large multi-packet buffers by default
[tftp] Explicitly abort connection whenever parent interface is closed
[uri] Allow tftp_uri() to construct a URI with a custom port
[pxe] Use tftp_uri() to construct PXE TFTP URIs
[pxe] Maintain a queue for received PXE UDP packets
[ncm] Reserve headroom in received packets
[usb] Try multiple USB device configurations
[usb] Handle CDC union functional descriptors
[usb] Parse endpoint descriptor bInterval field
[usb] Allow usb_stream() to enforce a terminating short packet
[ecm] Add support for CDC-ECM USB Ethernet devices
[xhci] Delay after (possibly) forcing port link state to RxDetect
[build] Move branding information to config/branding.h
[build] Use PRODUCT_SHORT_NAME for end-user visible strings
[build] Allow product URI to be customised via config/branding.h
[build] Allow error message URI to be customised via config/branding.h
[build] Allow command help text URI to be customised via config/branding.h
[build] Allow setting help text URI to be customised via config/branding.h
[build] Allow product tag line to be customised via config/branding.h
[rndis] Add rndis_rx_err()
[usb] Handle port status changes received after failing to find a driver
[efi] Disallow R_X86_64_32 relocations
[build] Apply the "-fno-PIE -nopie" workaround only to i386 builds
[usb] Provide generic framework for refilling receive endpoints
[usb] Use generic refill framework for USB hub interrupt endpoints
[ecm] Use generic refill framework for bulk IN and interrupt endpoints
[ncm] Use generic refill framework for bulk IN and interrupt endpoints
[libc] Remove unused string functions
[libc] Rewrite string functions
[test] Add self-tests for more string functions
[test] Add constant-length memset() self-tests
[libc] Reduce size of memset()
[usb] Add generic USB network device framework
[ecm] Use generic USB network device framework
[ncm] Use generic USB network device framework
[timer] Rewrite the 8254 Programmable Interval Timer support
[xhci] Leak memory if controller fails to disable slot
[xhci] Abort commands on timeout
[test] Add IPv4 self-tests
[legal] Add missing copyright header to net/ipv4.c
[ipv4] Rewrite inet_aton()
[libc] Rewrite strtoul()
[hyperv] Check for required features
[prefix] Use .bss16 as temporary stack space for calls to install_block
[zbin] Use LZMA compression
[zbin] Perform extra normalisation after completing decompression
[prefix] Call decompressor in flat real mode when DEBUG=libprefix is enabled
[zbin] Allow decompressor to generate debug output via BIOS console
[zbin] Fix check for existence of most recent output byte
[zbin] Remove now-unused unnrv2b.S decompressor
[legal] Update GPLv2 licence text
[legal] Include full licence text for all GPL2_OR_LATER files
[mucurses] Add missing FILE_LICENCE declarations
[legal] Add support for the Unmodified Binary Distribution Licence
[legal] Add UBDL relicensing tool
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[libc] Rewrite unrelicensable portions of stddef.h
[libc] Rewrite unrelicensable portions of ctype.h
[libc] Rewrite setjmp() and longjmp()
[libc] Rewrite byte-swapping code
[elf] Rewrite ELF header
[list] Relicense list.h
[iscsi] Rewrite unrelicensable portions of iscsi.c
[pci] Remove outdated and mostly-unused pci_ids.h file
[pci] Rewrite unrelicensable portions of pci.h
[settings] Use list_first_entry() when unregistering child settings
[settings] Rewrite unrelicensable portions of settings.c
[menu] Abstract out the generic concept of a jump scroller
[settings] Use generic jump scrolling abstraction
[malloc] Move valgrind headers out of arch/x86
[malloc] Rewrite unrelicensable portions of malloc.c
[build] Remove unused IMPORT_SYMBOL() and EXPORT_SYMBOL() macros
[build] Remove unused __keepme macro
[pxe] Remove obsolete references to pxeparent_dhcp
[build] Remove obsolete and unused portions of config.c
[build] Use REQUIRE_OBJECT() to drag in per-object configuration
[build] Fix the REQUIRE_SYMBOL mechanism
[i386] Move real_to_user() to realmode.h
[linux] Rewrite headers included in all builds
[retry] Rewrite unrelicensable portions of retry.c
[retry] Colourise debug output
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[xhci] Enable USB3 ports on Intel PCH8/PCH9 controllers
[xhci] Undo PCH-specific quirk fixes when removing device
[xen] Set the "feature-rx-notify" flag for netfront devices
[http] Abstract out HTTP Digest hash algorithm operations
[http] Support MD5-sess Digest authentication
[dm96xx] Add driver for Davicom DM96xx USB Ethernet NICs
[legal] Relicense Davicom DM96xx drivers
[mii] Add generic mii_check_link() function
[smsc75xx] Add driver for SMSC/Microchip LAN75xx USB Ethernet NICs
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
[tcp] Implement support for TCP Selective Acknowledgements (SACK)
[smsc75xx] Move RX FIFO overflow message to DBGLVL_EXTRA
[tcpip] Fix dubious calculation of min_port
[libc] Add ffs(), ffsl(), and ffsll()
[usb] Add the concept of a USB bus maximum transfer size
[ncm] Respect maximum transfer size of the bus
[usb] Add functions for manual device address assignment
[xhci] Forcibly disable SMIs if BIOS fails to release ownership
[autoboot] Match against parent devices when matching by bus type and location
[usb] Add config/usb.h for USB configuration options
[xhci] Do not release ownership back to BIOS when booting an OS
[ehci] Add support for EHCI host controllers
[netdevice] Add missing bus types to netdev_fetch_bustype()
[usb] Fix USB timeouts to match specification
[libprefix] Fix building on 64-bit FreeBSD 8.4
[xhci] Ring doorbell as part of endpoint reset
[usb] Reset endpoints without waiting for a new transfer to be enqueued
[usb] Add clear_tt() hub method to clear transaction translator buffer
[usb] Clear transaction translator buffers when applicable
[ehci] Support USB1 devices attached via transaction translators
[usb] Improve debug messages for failed control transactions
[xhci] Support USB1 devices attached via transaction translators
[libc] Fix typo in longjmp()
[libc] Add x86_64 versions of setjmp() and longjmp()
[test] Add setjmp()/longjmp() self-tests
[test] Simplify digest algorithm self-tests
[crypto] Add SHA-224 algorithm
[crypto] Add SHA-512 algorithm
[crypto] Add SHA-384 algorithm
[crypto] Add SHA-512/256 algorithm
[crypto] Add SHA-512/224 algorithm
[efi] Ensure drivers are disconnected when ExitBootServices() is called
[peerdist] Add support for decoding PeerDist Content Information
[xhci] Always reset root hub ports
[romprefix] Allow autoboot device filter to be disabled
[util] Add ability to dump PCI device ID list
[efi] Add EFI entropy source
[efi] Add EFI time source
[efi] Provide a dummy data block in nii_initialise()
[efi] Poll media status only if advertised as supported
[efi] Poll for TX completions only when there is an outstanding TX buffer
[efi] Use the EFI_RNG_PROTOCOL as an entropy source if available
[eepro100] Remove duplicate PCI_ROM() line
[prism2] Remove duplicate PCI_ROM() lines
[build] Allow building PCI ROMs with device ID lists
[build] Fix compiler warning on OpenBSD 5.7
[build] Work around binutils quirk on OpenBSD 5.7
[build] Use a single call to parserom.pl to speed up building
[intel] Report any unexpected interrupt causes
[intel] Force RX polling on VMware emulated 82545em
[realtek] Do not attempt to access EEPROM on RTL8169 chips
[rtl818x] Obviate RTL_ROM() hack
[build] Construct all-drivers list based on driver class
[test] Include IPv6 support when performing settings self-tests
[base16] Add buffer size parameter to base16_encode() and base16_decode()
[base64] Add buffer size parameter to base64_encode() and base64_decode()
[settings] Add "base64" setting type
[vram] Add "vram" built-in setting to dump video RAM
[usb] Include setup packet within I/O buffer for message transfers
[pci] Provide PCI_CLASS() to calculate a scalar PCI class value
[usb] Detect missed disconnections
[usb] Maintain a list of all USB buses
[usb] Maintain single lists of halted endpoints and changed ports
[ehci] Poll child companion controllers after disowning port
[usb] Add find_usb_bus_by_location() helper function
[ehci] Allow UHCI/OHCI controllers to locate the EHCI companion controller
[uhci] Add support for UHCI host controllers
[usb] Provide usb_endpoint_name() for use by host controller drivers
[xhci] Use meaningful device names in debug messages
[ehci] Use meaningful device names in debug messages
[uhci] Use meaningful device names in debug messages
[ipv6] Disambiguate received ICMPv6 errors
[usb] Add USB_INTERRUPT_OUT internal type
[usb] Add generic USB human interface device (HID) framework
[usb] Add basic support for USB keyboards
[usb] Do not call usb_hotplug() when registering a new hub
[usb] Always clear recorded disconnections after performing hotplug actions
[intel] Expose intel_diag() for use by other Intel NIC drivers
[intel] Allow for the use of advanced TX descriptors
[intel] Add support for mailbox used by virtual functions
[intel] Add intelxvf driver for Intel 10 GigE virtual function NICs
[int13con] Add basic ability to log to a local disk via INT 13
[intel] Add intelxvf_stats() to dump packet statistics registers
[intel] Fix operation when physical function has jumbo frames enabled
[neighbour] Return success when deferring a packet
[xhci] Fix length of allocated slot array
[build] Fix .ids.o creation for drivers not in the all-drivers build
[xhci] Fix comparison of signed and unsigned integers
[ipoib] Fix REMAC cache discarder
[xhci] Record device-specific quirks in xHCI device structure
[xhci] Ignore invalid protocol speed ID values on Intel Skylake platforms
[pci] Use flat real mode to call INT 1a,b101
[tcp] Do not shrink window when discarding received packets
[mromprefix] Report a dummy size at offset 0x02 of .mrom payload
[ethernet] Add minimal support for receiving LLC frames
[netdevice] Add a generic concept of a "blocked link"
[stp] Add support for detecting Spanning Tree Protocol non-forwarding ports
[stp] Fix interpretaton of hello time
[dhcp] Defer discovery if link is blocked
[pxe] Always reconstruct packet for PXENV_GET_CACHED_INFO
[serial] Add general abstraction of a 16550-compatible UART
[gdb] Use new UART abstraction in GDB serial transport
[serial] Use new UART abstraction in serial console driver
[ipoib] Mark REMAC cache as expensive
[ipoib] Attempt to generate ARPs as needed to repopulate REMAC cache
[gdb] Allow gdbstub to be started on an arbitrary serial port
[xen] Wait for and clear XenStore event before receiving data
[tcp] Gracefully close connections during shutdown
[ipoib] Transmit multicast packets as broadcasts
[efi] Fix receive and transmit completion reporting
[efi] Allow user experience to be downgraded
[build] Add named configuration for qemu
[tcp] Ensure FIN is actually sent if connection is closed while idle
[fault] Generalise NETDEV_DISCARD_RATE fault injection mechanism
[fault] Add inject_corruption() to randomly corrupt data
[profile] Add profile_custom() for profiling with arbitrary time units
[interface] Add intf_poke() helper
[xfer] Use intf_poke() to implement xfer_window_changed()
[xfer] Add xfer_check_order() utility function
[xferbuf] Generalise to handle umalloc()-based buffers
[xferbuf] Add xfer_buffer() to provide direct access to underlying buffer
[downloader] Use generic data-transfer buffer mechanism
[downloader] Provide direct access to the underlying data transfer buffer
[build] Fix compiler warnings on some gcc versions
[crypto] Add bit-rotation functions for 8-bit and 16-bit values
[802.11] Use correct SHA1_DIGEST_SIZE constant name
[crypto] Add ECB block cipher mode (for debug and self-tests only)
[test] Generalise cipher tests and use okx()
[test] Define shortcuts for frequently-used NIST AES test vectors
[test] Add NIST self-tests for AES128 and AES256 in ECB mode
[crypto] Replace AES implementation
[test] Add NIST self-tests for AES192 in ECB and CBC modes
[crypto] Remove AXTLS headers
[build] Fix strict-aliasing warning on older gcc versions
[ipv6] Treat a missing network device name as "netX"
[netdevice] Avoid using zero as a network device index
[ipv4] Redefine IP address constants to avoid unnecessary byte swapping
[ipv4] Allow IPv4 socket addresses to include a scope ID
[iscsi] Add missing "break" statements
[netdevice] Allow network devices to disclaim IRQ support at runtime
[peerdist] Include trimmed range within content information block
[peerdist] Add support for constructing and decoding discovery messages
[peerdist] Add support for constructing and decoding retrieval messages
[pool] Add a generic concept of a pooled connection
[linebuf] Support buffering of multiple lines
[elf] Reject ELFBoot images requiring virtual addressing
[comboot] Avoid dragging in serial console support unconditionally
[serial] Check for UART existence in uart_select()
[tls] Do not access beyond the end of a 24-bit integer
[tls] Report supported signature algorithms in ClientHello
[crypto] Support SHA-{224,384,512} in X.509 certificates
[efi] Hold off watchdog timer while running
[efi] Add missing "ULL" suffix on 64-bit constant
[block] Add generic block device translator
[http] Rewrite HTTP core to support content encodings
[peerdist] Add segment discovery mechanism
[peerdist] Add individual block download mechanism
[peerdist] Add block download multiplexer
[peerdist] Add support for PeerDist (aka BranchCache) HTTP content encoding
[dhcp] Allow pseudo-DHCP servers to use pseudo-identifiers
[dhcp] Ignore ProxyDHCPACKs without PXE options
[pxe] Warn about PXE NBPs that may be EFI executables
[test] Allow self-tests to report exit status when running under Linux
[image] Detect image type when image is first registered
[autoboot] Display image information as part of the default control flow
Olaf Hering (1):
[build] Sort objects in blib.a
Robin Smidsrød (2):
[vbox] Enable some more features now that we have LZMA compression
[build] Rewrite parserom.pl to support multiple source files
Thomas Miletich (1):
[intel] Add PCI ID for I218-LM
Tufan Karadere (1):
[crypto] Add ASN.1 OIDs for sha{224,384,512}WithRsaEncryption
Wissam Shoukair (2):
[comboot] Implement INT22,0x000c
[ipoib] Fix a race when chain-loading undionly.kpxe in IPoIB
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Alexey Kardashevskiy
|
780184aae6 |
pseries: Update SLOF firmware image to qemu-slof-20150429
The changelog is: > version: update to 20150429 > pci: Use QEMU created PCI device nodes > usb: support 64-bit pci bars > pci: Support 64-bit address translation > pci: program correct bridge limit registers during probe > scsi: handle report-luns failure > Fix "key?" Forth word when using USB keyboards > Remove bulk.fs package > Include make.rules in the library Makefiles Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de> |
||
|
Mark Cave-Ayland
|
a3122b681a |
Update OpenBIOS images
Update OpenBIOS images to SVN r1340 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
7edf2f0ec4 |
tag our seabios builds
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
10500ce260 |
update seabios submodule to release 1.8.2
git shortlog rel-1.8.1..rel-1.8.2
=================================
Gerd Hoffmann (1):
vga: rework virtio-vga support
Kevin O'Connor (5):
vgabios: Add config option for assembler fixups
vgabios: Emulate "leal" instruction
build: Support "make VERSION=xyz" to override the default build version
build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS
vgabios: On bda_save_restore() the saved vbe_mode also has flags in it
Paolo Bonzini (1):
smm: ignore bits 16,18-31 of SMM revision ID
Vladimir Serbinenko (1):
ahci: Ignore max_ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Gerd Hoffmann
|
7a4dfd1e4a |
virtio-vga: add vgabios configuration
Add seavgabios configuration for virtio-vga, hook up the new vgabios in the makefiles. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Alexey Kardashevskiy
|
0d2f830255 |
pseries: Update SLOF firmware image to qemu-slof-20150313
The changelog is: > virtio: Fix vring allocation > helpers: Fix SLOF_alloc_mem_aligned to meet callers expectation > Set default palette according to "16-color Text Extension" document > Fix rectangle drawing functions to work also with higher bit depths > Fix the x86emu patch file > Silence compiler warning when building the biosemu > Use device-type Forth word to set up the corresponding property > Improve /openprom node > pci-properties: Remove redundant call to device-type > cas: reconfigure memory nodes > pci: use 64bit bar ranges Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de> |
||
|
Gerd Hoffmann
|
93f7c4f09f |
seabios: update to 1.8.1 stable release
Carries two bugfixes and support for multiple pci root buses.
git shortlog rel-1.8.0..rel-1.8.1
=================================
Ameya Palande (1):
x86: add barrier to read{b,w,l} and write{b,w,l} functions
Kevin O'Connor (1):
smp: Fix smp race introduced in 0673b787
Marcel Apfelbaum (2):
fw/pci: scan all buses if extraroots romfile is present
fw/pci: map memory and IO regions for multiple pci root buses
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
09c0772be9 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1334 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
f3b18f35a2 |
sun4u: switch m48t59 NVRAM to MMIO access
Real sun4u systems memory-map the NVRAM on the (ISA) ebus, so switch over to MMIO from ioport access whilst setting the base year to 1968 as used by Sun systems. This allows all SPARC64 OSs included in my tests to correctly detect the NVRAM IC and read the hardware clock correctly upon boot. Note that this also requires a corresponding OpenBIOS update to r1330 in order to switch the SPARC64 NVRAM accessors over from ioport to MMIO. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
21f5826a04 |
seabios: update to 1.8.0 release
'git shortlog 8936dbb2..4c59f5d8' for seabios repo:
David Woodhouse (4):
Update EFI_COMPATIBILITY16_TABLE to match 0.98 spec update
build: use -m16 where available instead of asm(".code16gcc")
romlayout: Use .code16 not .code16gcc
vgabios: Use .code16 not .code16gcc
Gerd Hoffmann (2):
add scripts/tarball.sh
build: set LC_ALL=C
Hannes Reinecke (1):
megasas: read addional PCI I/O bar
Ian Campbell (1):
romlayout: Use "rep ; nop" not "rep nop".
Kevin O'Connor (139):
vgabios: Return from handle_1011() if handler found.
edd: Move EDD get drive parameters (int 1348) logic from disk.c to block.c.
edd: Use sectors==-1 to detect removable media.
edd: Separate out ATA and virtio specific parts of fill_edd().
cdemu: store internal cdemu fields in standard "el-torito" spec format.
Move cdemu call interface and disk_ret helper code to disk.c.
smm: Replace SMI assembler code with C code.
smm: Use a C struct to define the layout of the SMM area.
smp: Replace QEMU SMP init assembler code with C; run only in 32bit mode.
Don't enable thread preemption during S3 resume vga option rom execution.
Remove old Bochs bios fixed address string at 0xfff00.
Move most of the VAR16FIXED() defs to misc.c.
build: Avoid absolute paths during "whole-program" compiling.
Make sure handle_smi() and handle_smp() are compiled out if not enabled.
Remove the TODO file.
Abstract reset call (and possible 16bit mode switch) into reset() function.
build: Remove unused function getSectionsStart() from layoutrom.py.
build: Extract section visiting logic in layoutrom.py.
build: Refactor layoutrom.py gc() function.
build: Use customized entry point for each type of build.
build: Refactor findInit() function.
build: Rework getRelocs() to use a hash instead of categories in layoutrom.py
build: Keep segmented sections separate until final link step.
build: Use fileid instead of category to write sections in layoutrom.py.
build: Only export needed fields in LayoutInfo in layoutrom.py.
build: Get fixed address variables from 32bit compile pass (not 16bit)
build: Minor - fix comments referring to old tools/ directory.
xhci: Update the times for usb command timeouts.
ehci: Update usb command timeouts to use usb_xfer_time()
uhci: Update usb command timeouts to use usb_xfer_time()
ohci: Update usb command timeouts to use usb_xfer_time()
vgabios: Fix broken build resulting from e5749978.
boot: Change ":rom%d" boot order rom instance to ":rom%x"
Minor - remove stray tab from src/fw/smm.c.
build: Update kconfig to version in Linux 3.16.
usb: Fix usb_xfer_time() to work when called in 16bit mode.
xhci: Call usb_desc2pipe() on xhci_update_pipe().
xhci: Remove 16bit code wrappers.
xhci: Use high memory instead of low memory for internal storage.
xhci: Move root hub and setup code to top of file.
xhci: Add xhci_check_ports() and xhci_free_pipes() functions.
ehci: Move port power up from ehci_hub_detect() to check_ehci_ports().
usb-hub: Enable power to all ports prior to calling usb_enumerate().
xhci: Change xhci_hub_detect() to use connect status instead of link state.
uhci: Repeatedly poll for device detect for 100ms.
ohci: Repeatedly poll for device detect for 100ms.
ehci: Stall uhci/ohci init only until default port routing is done.
usb: Perform device detect polling on all usb controllers.
ehci: Fix bug in hub port assignment
Revert "Use the extra stack for 16bit USB and PS2 keyboard/mouse commands."
pmm: Fix entry point to support non-zero %ss
Move stack hop code below call32/call16 code in stacks.c
Add need_hop_back() call that determines if stack_hop_back is needed
Update invoke_mouse_handler() to use need_hop_back()
Update stack_hop_back() to jump to 16bit mode if called in 32bit mode.
Track when entering via call32() and use the same mode for stack_hop_back()
Simplify farcall16 code
Update reset() to use call16_back()
build: Support declaring 32bit C functions that must reside in the f-segment
Move call16() functions from romlayout.S to inline assembler in stacks.c
Break up call32() into call32() and call32_sloppy()
Fully restore 16bit state during call16_sloppy()
Implement call32 mechanism using SMIs.
Move a20 code from system.c and ps2port.h to x86.h
Backup and restore a20 on call32_sloppy()
usb: Rename ?hci_control() to ?hci_send_control()
usb: Rename usb_getFrameExp() to usb_get_period()
usb: Rename findEndPointDesc() to usb_find_desc()
usb: Rename send_default_control() to usb_send_default_control()
usb: Rename free_pipe() to usb_free_pipe()
usb: Clarify usb freelist manipulations
xhci: Change xhci_update_pipe() to xhci_realloc_pipe() and use for alloc too
uhci: Export uhci_realloc_pipe() instead of uhci_alloc_pipe()
ohci: Export ohci_realloc_pipe() instead of ohci_alloc_pipe()
ehci: Export ehci_realloc_pipe() instead of ehci_alloc_pipe()
usb: Use usb_realloc_pipe for pipe alloc, update, and free.
Use 32bit memcpy in int1587 when applicable
Don't clobber %ax on ENTRY_INTO32 macro
Create assembler macros for saving and restoring 'struct bregs'
Do full BREGS backup/restore for pmm, pnp, and irqentry_extrastack
Remove unused macro ENTRY_ST
vgabios: Don't declare custom internal BDA storage in std/bda.h
vgabios: Cache a pointer to the current mode struct in the BDA
vgabios: Don't pass vmode_g to vgafb_move_chars() / vgafb_clear_chars()
vgabios: Rename vbe_flags to flags
vgabios: Set cursor shape fixes
vgabios: Refactor get/set_cursor_shape() code
vgabios: Only init BDA device details in init_bios_area()
vgabios: Only set the dcc_index=8 if stdvga ports are available
vgabios: Move standard table definitions to std/vga.h
vgabios: Fill in available legacy modes in video_func_static at runtime
vgabios: Add support for reading framebuffer in "direct" mode
Fix PNP regression introduced in 99cb8f3e due to missed conversion
Minor - move PORT_PS2_CTRLB from hw/ps2port.h to hw/timer.c
vgabios: Support emulating text mode attributes while in graphics mode
vgabios: Add software cursor capability
Use an aligned stack offset when entering on the extra stack
Minor - comment updates in romlayout.S
Fix build issue on gcc34
pciinit: Fix build warning in mch_pci_slot_get_irq()
floppy: Make sure to yield() during floppy PIO
Minor - be consistent in placement of .code16/32 in romlayout.S
Use macros for .code16/32 mode switches in inline asm in stacks.c
Eliminate FUNCFSEG - only force portions of inline asm to f-segment
usb: Update USB hub code to support super speed hubs
Simplify README files - point to online documentation instead
sdcard: Initial support for SD cards on PCI SDHCI controllers on QEMU
Add wiki documentation to repository
docs: Don't point to repo README files
docs: Add info on MODE16/MODESEGMENT compile time flags
docs: Add page describing SeaBIOS final object linking
scsi: Move cdb_* functions above scsi_* functions
scsi: Move process_scsi_op() to hw/blockcmd.c and rename
cdrom: call scsi_process_op() instead of cdb_read()
scsi: Don't export cdb_* functions
cdrom: Break up very large read requests into smaller requests
block: Check for read/write requests over 64K
usb: Add support for OHCI bulk transfers
readserial: Enhance pipe support
docs: Add documentation on using readserial.py script
uhci: Enable "depth" tree traversal for bulk transfers
uhci: Increase bulk transfer STACKTDS to 16
vgabios: Support emulated text in gfx_read_char()
ehci: No need to support td array wrapping
ehci: Simplify fillTDbuffer() and rename
ehci: Merge ehci_send_control with ehci_send_bulk
ohci: Merge ohci_send_control with ohci_send_bulk
uhci: Merge uhci_send_control with uhci_send_bulk
xhci: Merge xhci_send_control with xhci_send_bulk
usb: Use usb_send_pipe() now that all drivers have x_send_pipe()
xhci: Move xhci_xfer_x() functions together
xhci: Merge some xhci_xfer_x() functions into xhci_send_pipe()
usb: Control transfers always have an 8 byte command size
usb: Minor - properly free memory on get_device_config() error path
checkstack: Handle callw instruction
docs: Document why v1.6.3 release came after v0.6.2
docs: Update release history with dates of stable releases
docs: There is only one VAR16 flag now
docs: Note v1.8.0 release
Marcel Apfelbaum (1):
hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
Markus Armbruster (1):
boot: Fix boot order for SCSI target, lun > 9
Paolo Bonzini (5):
piix: add and use dev-piix.h
smm: complete SMM setup
smm: unify SMM handlers
vgabios: fix graphics operation with Bochs VGA in non-DISPI modes
vgabios: implement read char in graphics mode
zhanghailiang (1):
acpi: use specified macro instead of magic-number
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Alexey Kardashevskiy
|
549cfe5d5d |
pseries: Update SLOF firmware image to 20141202
The changelog is: > version: update to 20141202 > ipv4: Fix send packet across a subnet > pci: scan only type 0 and type 1 > usb-xhci: support xhci extended capabilities > Fix term-io-key to also work when stdin has not been set yet > net-snk: llfw startup is using the wrong offset to handler > net-snk: Make call_client_interface() a bit more ABI compliant > net-snk: Remove custom printf version > net-snk: Sanitize our .lds file > net-snk: Avoid type clash for stdin & stdout > net-snk: use socket descriptor in the network stack > net-snk: Remove printk() in favor of printf() > net-snk: Remove redundant prototypes > net-snk: Remove unused timer functions > net-snk: Remove some unused PCI functions > net-snk: Remove module system > net-snk: Remove insmod/rmmod > net-snk: Remove snk_kernel_interface and related definitions > net-snk: Remove pci/vio_config gunk > js2x: Fix build > net-snk: Remoe some now unused "kernel" functions > rtas: Improve error handling in instantiate-rtas > version: update to 20140827 > Add private HCALL to inform updated RTAS base and entry > xhci: fix port assignment Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de> |
||
|
Gerd Hoffmann
|
c246cee4ee |
update ipxe from 69313ed to 35c5379
Anton D. Kachalov (1):
[intel] Add 8086:1557 card (Intel 82599 10G ethernet mezz)
Christian Hesse (1):
[build] Merge util/geniso and util/genliso
Curtis Larsen (3):
[efi] Use EFI_CONSOLE_CONTROL_PROTOCOL to set text mode if available
[efi] Report errors from attempting to disconnect existing drivers
[efi] Try various possible SNP receive filters
Dale Hamel (1):
[smbios] Expose board serial number as ${board-serial}
Florian Schmaus (1):
[build] Set GITVERSION only if there is a git repository
Hannes Reinecke (3):
[ethernet] Provide eth_random_addr() to generate random Ethernet addresses
[igbvf] Assign random MAC address if none is set
[igbvf] Allow changing of MAC address
Jan Kiszka (1):
[intel] Add I217-LM PCI ID
Marin Hannache (4):
[nfs] Fix an invalid free() when loading a symlink
[nfs] Fix an invalid free() when loading a regular (non-symlink) file
[nfs] Rewrite NFS URI handling
[readline] Add CTRL-W shortcut to remove a word
Michael Brown (144):
[profile] Allow interrupts to be excluded from profiling results
[intel] Exclude time spent in hypervisor from profiling
[build] Fix version.o dependency upon git index
[tcp] Defer sending ACKs until all received packets have been processed
[lkrnprefix] Function as a bzImage kernel
[build] Avoid errors when build directory is mounted via NFS
[undi] Apply quota only to number of complete received packets
[lkrnprefix] Make real-mode setup code relocatable
[intel] Increase receive ring fill level
[syslog] Strip invalid characters from hostname
[test] Add self-tests for strdup()
[libc] Prevent strndup() from reading beyond the end of the string
[efi] Allow for optional protocols
[efi] Make EFI_DEVICE_PATH_TO_TEXT_PROTOCOL optional
[efi] Make EFI_HII_DATABASE_PROTOCOL optional
[efi] Do not try to fetch loaded image device path protocol
[ipv6] Fix definition of IN6_IS_ADDR_LINKLOCAL()
[dhcpv6] Do not set sin6_scope_id on the unspecified client socket address
[ipv6] Do not set sin6_scope_id on source address
[ipv6] Include network device when transcribing multicast addresses
[ipv6] Avoid potentially copying from a NULL pointer in ipv6_tx()
[librm] Allow for the PIC interrupt vector offset to be changed
[ifmgmt] Do not sleep CPU while configuring network devices
[scsi] Improve sense code parsing
[iscsi] Read IPv4 settings only from the relevant network device
[iscsi] Include IP address origin in iBFT
[debug] Allow debug message colours to be customised via DBGCOL=...
[build] Expose build timestamp, build name, and product names
[efi] Allow device paths to be easily included in debug messages
[efi] Provide a meaningful EFI SNP device name
[efi] Restructure EFI driver model
[build] Fix erroneous object name in version object
[build] Add yet another potential location for isolinux.bin
[efi] Allow network devices to be created on top of arbitrary SNP devices
[autoboot] Allow autoboot device to be identified by link-layer address
[efi] Identify autoboot device by MAC address when chainloading
[efi] Attempt to start only drivers claiming support for a device
[efi] Rewrite SNP NIC driver
[efi] Include SNP NIC driver within the all-drivers target
[crypto] Add support for iPAddress subject alternative names
[crypto] Fix debug message
[netdevice] Reset network device index when last device is unregistered
[efi] Update EDK2 headers
[efi] Install our own disk I/O protocol and claim exclusive use of it
[efi] Allow for interception of boot services calls by loaded image
[efi] Print well-known GUIDs by name in debug messages
[efi] Include EFI_CONSOLE_CONTROL_PROTOCOL header
[ioapi] Fail ioremap() when attempting to map a zero bus address
[intel] Check for ioremap() failures
[realtek] Check for ioremap() failures
[vmxnet3] Check for ioremap() failures
[skel] Check for ioremap() failures
[myson] Check for ioremap() failures
[natsemi] Check for ioremap() failures
[i386] Add functions to read and write model-specific registers
[x86_64] Add functions to read and write model-specific registers
[efi] Show more diagnostic information when building with DEBUG=efi_wrap
[ioapi] Centralise notion of PAGE_SIZE
[lotest] Discard packets arriving on the incorrect network device
[xen] Import selected public headers
[xen] Add basic support for PV-HVM domains
[xen] Add support for Xen netfront virtual NICs
[efi] Default to releasing network devices for use via SNP
[efi] Unload started images only on failure
[efi] Fill in loaded image's DeviceHandle if firmware fails to do so
[efi] Fix incorrect debug message level when device has no device path
[efi] Report exact failure when unable to open the device path
[netdevice] Avoid registering duplicate network devices
[efi] Ignore failures when attempting to install SNP HII protocol
[efi] Expand the range of well-known EFI GUIDs in debug messages
[efi] Provide efi_handle_name() for debugging
[efi] Add ability to dump all openers of a given protocol on a handle
[efi] Use efi_handle_name() instead of efi_handle_devpath_text()
[efi] Use efi_handle_name() instead of efi_devpath_text() where applicable
[efi] Allow compiler to perform type checks on EFI_HANDLE
[efi] Avoid unnecessarily passing pointers to EFI_HANDLEs
[efi] Dump existing openers when we are unable to open a protocol
[efi] Dump handle information around connect/disconnect attempts
[efi] Improve debugging of the debugging facilities
[efi] Add excessive sanity checks into efi_debug functions
[efi] Also try original ComponentName protocol for retrieving driver names
[efi] Print raw device path when we have no DevicePathToTextProtocol
[efi] Add ability to dump SNP device mode information
[efi] Reset multicast filter list when setting SNP receive filters
[efi] Provide centralised definitions of commonly-used GUIDs
[efi] Open device path protocol only at point of use
[efi] Move abstract device path and handle functions to efi_utils.c
[efi] Generalise snpnet_pci_info() to efi_locate_device()
[bios] Support displaying and hiding cursor
[efi] Support displaying and hiding cursor
[readline] Ensure cursor is visible when prompting for input
[xen] Accept alternative Xen platform PCI device ID 5853:0002
[xen] Use version 1 grant tables by default
[xen] Cope with unexpected initial backend states
[smc9000] Avoid using CONFIG as a preprocessor macro
[build] Allow for named configurations at build time
[intel] Display PBS value when applying ICH errata workaround
[intel] Display before and after values for both PBS and PBA
[intel] Apply PBS/PBA errata workaround only to ICH8 PCI device IDs
[efi] Add definitions of GUIDs observed during Windows boot
[efi] Dump details of any calls to our dummy block and disk I/O protocols
[romprefix] Do not preserve unused register %di
[build] Remove obsolete references to .zrom build targets
[build] Allow ISA ROMs to be built
[build] Avoid deleting config header files if build is interrupted
[prefix] Halt system without burning CPU if we cannot access the payload
[prefix] Report both %esi and %ecx when opening payload fails
[util] Use PCI length field to obtain length of individual images
[mromprefix] Use PCI length field to obtain length of individual images
[mromprefix] Allow for .mrom images larger than 128kB
[efi] Show details of intercepted LoadImage() calls
[efi] Make our virtual file system case insensitive
[efi] Wrap any images loaded by our wrapped image
[efi] Use the SNP protocol instance to match the SNP chainloading device
[efi] Avoid returning uninitialised data from PCI configuration space reads
[efi] Make EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL optional
[efi] Allow for non-PCI snpnet devices
[build] Clean up all binary directories on "make [very]clean"
[efi] Add efifatbin utility
[efi] Provide dummy device path in efi_image_probe()
[dhcp] Check for matching chaddr in received DHCP packets
[dhcp] Remove obsolete dhcp_chaddr() function
[build] Use -malign-double to build 32-bit UEFI binaries
[efi] Centralise definitions of more protocol GUIDs
[efi] Add definitions of GUIDs observed when chainloading from Intel driver
[efi] Free transmit ring entry before calling netdev_tx_complete()
[efi] Generalise snpnet_dev_info() to efi_device_info()
[efi] Update to current EDK2 headers
[efi] Add NII / UNDI driver
[efi] Check for presence of UNDI in NII protocol
[efi] Include NII driver within "snp" and "snponly" build targets
[ping] Report timed-out pings via the callback function
[ping] Allow termination after a specified number of packets
[ping] Allow "ping" command output to be inhibited
[intel] Use autoloaded MAC address instead of EEPROM MAC address
[crypto] Fix parsing of OCSP responder ID key hash
[vmxnet3] Add profiling code to exclude time spent in the hypervisor
[netdevice] Fix erroneous use of free(iobuf) instead of free_iob(iobuf)
[libc] Add ASSERTED macro to test if any assertion has triggered
[list] Add sanity checks after list-adding functions
[malloc] Tidy up debug output
[malloc] Sanity check parameters to alloc_memblock() and free_memblock()
[malloc] Check integrity of free list
[malloc] Report caller address as soon as memory corruption is detected
Peter Lemenkov (1):
[build] Check if git index actually exists
Robin Smidsrød (2):
[build] Add named configuration for VirtualBox
[build] Avoid using embedded script in VirtualBox named configuration
Sven Ulland (1):
[lacp] Set "aggregatable" flag in response LACPDU
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
35fb5b73a2 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1327 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Gerd Hoffmann
|
953ea14d66 |
update seabios to 1.7.5.1 stable release
git shortlog since 1.7.5:
Hannes Reinecke (1):
megasas: read addional PCI I/O bar
Kevin O'Connor (5):
boot: Change ":rom%d" boot order rom instance to ":rom%x"
vgabios: Return from handle_1011() if handler found.
Don't enable thread preemption during S3 resume vga option rom execution.
build: Avoid absolute paths during "whole-program" compiling.
ehci: Fix bug in hub port assignment
Marcel Apfelbaum (1):
hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
Markus Armbruster (1):
boot: Fix boot order for SCSI target, lun > 9
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Mark Cave-Ayland
|
e3b561be48 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1321 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
1862ed02df |
Update OpenBIOS images
Update OpenBIOS images to SVN r1320 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Mark Cave-Ayland
|
d2a68f3a30 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1316 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexey Kardashevskiy
|
d6c23f8a1b |
pseries: Update SLOF firmware image to qemu-slof-20140630
The changelog is: > Quieten the grub warning > Add boot menu support > boot from disk having chrp-boot file > fat16: fix read and remove debug messages > dhcparch define missing in compilation > pci-scan: reserve memory for pci-bridge without devices > pci-bridge: Fix ranges when no device beyond the bridge > Set dhcp arch in board-qemu config file > xhci: fix controller stop > dhcp: support client architecture code 93 > virtio-blk: support variable block size > usb: use common pci dma alloc/mapping routines > Remove unused SLOF code > pci-bridge: generic bridge needs to support pci dma functions > pci: extract dma functions as separate file > e1000: fix usage of multiple nics Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de> |
||
|
Andreas Färber
|
ee0f2601b9 |
prep: Update ppc_rom.bin
This replaces QEMU-side workarounds for PCI BARs and CPU reset. Signed-off-by: Andreas Färber <andreas.faerber@web.de> |
||
|
Mark Cave-Ayland
|
871c60a736 |
Update OpenBIOS images
Update OpenBIOS images to SVN r1306 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> |
||
|
Alexander Graf
|
4e73c78192 |
PPC: Add u-boot firmware for e500
This adds a special build of u-boot tailored for the e500 platforms we emulate. It is based on the current version of upstream u-boot which contains all the code necessary to drive our QEMU provided machines. Signed-off-by: Alexander Graf <agraf@suse.de> |
||
|
Gerd Hoffmann
|
3257fc8383 |
seabios: update to 1.7.5 final
git shortlog since -rc1:
Gerd Hoffmann (2):
acpi: remove PORT_ACPI_PM_BASE constant
Allow using full io region on q35.
Kevin O'Connor (2):
vgabios: Add debug message if x86emu leal check triggers.
python3 fixes for vgabios and csm builds.
Paolo Bonzini (1):
smm: remove code to handle ACPI disable/enable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
||
|
Gerd Hoffmann
|
d880b28cef |
ipxe: update to current git
Now that ipxe has separate settings for load / boot banner timeouts
re-enable the boot banner while keeping the load banner turned off,
so we don't add a delay to non-pxe boots.
git shortlog:
Adrian Jamróz (2):
[rhine] Rewrite VIA Rhine driver
[velocity] Rewrite VIA Velocity driver
Alex Williamson (4):
[romprefix] Allow ROM banner timeout to be configured independently
[autoboot] Enable infrastructure to specify an autoboot device location
[prefix] Allow prefix to specify a PCI autoboot device location
[romprefix] Store boot bus:dev.fn address as autoboot device location
Alexander Chernyakhovsky (1):
[ocsp] Handle OCSP responses that don't provide certificates
Bo Yang (1):
[build] Avoid strict-aliasing warning for gcc 4.3
Brandon Penglase (1):
[build] Add vmware build target
Christian Hesse (2):
[build] Update build system for Syslinux 6.x
[build] Fix LABEL name for .liso images
Daniel P. Berrange (1):
[zbin] Fix size used for memset in alloc_output_file
Frediano Ziglio (1):
[romprefix] Fix incorrect pointer offset in undiloader.S
Kevin Tran (1):
[tg3] Fix various tg3 issues
Marin Hannache (8):
[linux] Add missing #include <stddef.h>
[legal] Add FILE_LICENCE for valgrind headers
[legal] Add FILE_LICENCE for core/errno.c
[legal] Add FILE_LICENCE for ath9k driver headers
[legal] Add missing FILE_LICENCE declarations
[cmdline] Add "poweroff" command
[nfs] Add support for NFS protocol
[nfs] Fix an issue with the selection of a local port
Michael Brown (363):
[netdevice] Separate VLAN support from presence of VLAN-supporting drivers
[undi] Work around specific devices with known broken interrupt behaviour
[menu] Prevent character code zero from acting as a shortcut key
[menu] Prevent separators with shortcut keys from being selected
[tftp] Allow TFTP block size to be controlled via the PXE TFTP API
[pcbios] Add extra debugging messages when unhiding iPXE from memory
[nbiprefix] Set up real-mode stack before jumping to .text16
[prefix] Use %cs as implicit parameter to uninstall()
[pcbios] Inhibit all calls to INT 15,e820 and INT 15,e801 during POST
[romprefix] Display only one "Ctrl-B" prompt per PCI device during POST
[efi] Update to latest EDK2 headers
[autoboot] Split main control flow out of main() into a new function ipxe()
[efi] Add last_opened_snpdev()
[efi] Expose downloaded images via EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
[efi] Add our own EFI_LOAD_FILE_PROTOCOL implementation
[efi] Fix building with newer binutils
[lkrnprefix] Allow relocation when no initrd is present
[efi] Fix minor typos in efi_image.c
[efi] Add EFI-specific debugging macros
[int13] Split out ISO9660 and El Torito definitions to separate header files
[smbios] Provide SMBIOS version number via smbios_version()
[smbios] Mangle UUIDs for SMBIOS version 2.6 and newer
[dhcp] Use PXE byte ordering for UUID in DHCP option 97
[uuid] Abstract UUID mangling code out to a separate uuid_mangle() function
[efi] Provide efi_guid_ntoa() for printing EFI GUIDs
[efi] Add "reboot" command for EFI
[cmdline] Add ability to perform a warm reboot
[efi] Enable "cpuid" command by default for EFI
[cs89x0] Remove conflicting macro definitions
[igbvf] Remove conflicting macro definitions
[prism2] Use standard type names
[efi] Fetch device path for loaded image during initialisation
[settings] Expose build architecture and platform via settings
[bios] Fix screen clearing on buggy BIOSes
[intel] Remove hardcoded offsets for descriptor ring registers
[intel] Expose functionality to be shared with intelx driver
[intel] Add intelx driver for Intel 10 Gigabit Ethernet NICs
[efi] Remove obsolete EFI I/O implementation using EFI_CPU_IO_PROTOCOL
[libc] Use __einfo() tuple as first argument to EUNIQ()
[libc] Redefine low 8 bits of error code as "platform error code"
[efi] Perform meaningful error code conversions
[efi] Add sample platform-generated error disambiguations
[netdevice] Use link-layer address as part of RNG seed
[build] Allow sparse to find compiler.h
[build] Define __WINT_TYPE__ if necessary
[build] Allow sparse to be invoked via "make C=1"
[build] Avoid sparse undeclared symbol warning for PROVIDE_SYMBOL()
[process] Mark process descriptor as static in PERMANENT_PROCESS
[realtek] Print bad MAC address in debug message when inferring no EEPROM
[build] Use -Wno-decl when running sparse
[build] Fix uses of literal 0 as a NULL pointer
[build] Fix dubious uses of bitwise operators
[build] Default to short wchar_t in stddef.h
[realtek] Use ID word to detect EEPROM presence
[errdb] Strip platform error code for non-platform-generated errors
[pxe] Convert external PXE API errors into iPXE platform-generated errors
[realtek] Allow reaction time between writing RTL_CAPR and reading RTL_CR
[romprefix] Report failure cause when unable to open payload
[realtek] Ensure EEPROM writes reach chip before starting udelay()
[dhcp] Remove obsolete bootp.h header
[netdevice] Add netdev_tx_defer() to allow drivers to defer transmissions
[realtek] Defer packets when no transmit descriptors are available
[settings] Eliminate settings "tag magic"
[smbios] Allow access to unreferenced SMBIOS strings
[smbios] Allow access to multiple instances of SMBIOS structures
[crypto] Report meaningful error when certificate chain validation fails
[build] Use $(eval) if available
[build] Provide "allXXXs" targets for all media on all platforms
[build] Add efidrv.cab target for UEFI Secure Boot signing
[netdevice] Add "chip" setting
[netdevice] Reset MAC address when asked to clear the "mac" setting
[realtek] Fix reopening of legacy-mode 8139 NIC
[crypto] Accept OCSP responses containing multiple certificates
[bzimage] Align initrd images to page boundary
[bzimage] Fix spurious uninitialised-variable warning on some gcc versions
[build] Work around bug in gcc >= 4.8
[autoboot] Use next-server from filename's settings block
[tcp] Do not send RST for unrecognised connections
[tcp] Fix comment to match code behaviour
[test] Add self-tests for base16
[base16] Generalise base16_decode() to hex_decode()
[settings] Use hex_decode() to parse hex settings
[settings] Add "hexraw" setting type
[netdevice] Add "bustype" and "busloc" settings
[settings] Add "busdevfn" setting type
[linux] Add support for accessing PCI configuration space via /proc/bus/pci
[settings] Add config/settings.h
[settings] Expose PCI configuration space via settings mechanism
[settings] Make "netX" settings block function as a symbolic link
[cmdline] Accept "netX" in iPXE commands
[lotest] Include sequence number within loopback test packets
[intel] Incorporate ring producer and consumer counters in diagnostics
[base16] Ensure base16_encode() always terminates its result string
[realtek] Report RX error detail in debug messages
[script] Allow for backslash continuation of script lines
[settings] Add support for navigation keys in "config" user interface
[realtek] Allow extra space in RX buffers
[ifmgmt] Avoid relying on global variable within ifcommon_exec()
[script] Avoid trying to read final character of a zero-length string
[legal] Add missing FILE_LICENCE declarations
[build] Fix %.licence build target
[settings] Clarify usage of the term "named setting"
[settings] Avoid potentially large stack allocations
[settings] Remove temporary name buffer parameter from parse_setting_name()
[settings] Remove default_type parameter from parse_setting_name()
[settings] Expose parse_setting_name()
[settings] Change "not-found" semantics of fetch_setting_copy()
[settings] Add fetchf_setting_copy()
[settings] Eliminate call to fetchf_named_setting() in expand_settings()
[settings] Eliminate call to store_named_setting() in nslookup.c
[settings] Remove now-unused store_named_setting()
[parseopt] Allow parsed option to be modified
[parseopt] Move parse_settings() to parseopt.c
[parseopt] Add parse_setting()
[settings] Eliminate call to storef_named_setting() in choose_exec()
[settings] Eliminate calls to {fetch,store}f_named_setting() in NVO commands
[settings] Remove now-unused fetchf_named_setting() and storef_named_setting()
[script] Allow initial whitespace on lines containing labels
[script] Allow commands following a script label
[settings] Introduce the generalised concept of a numeric setting
[cmdline] Add "inc" command
[pci] Add pci_find_next() to iterate over existent PCI devices
[cmdline] Add "pciscan" command to allow iteration over PCI devices
[udp] Move high-frequency debug messages to DBGLVL_EXTRA
[ipv6] Rename sin_{family,port} to sin6_{family,port} in struct sockaddr_in6
[tcpip] Allow binding to unspecified privileged ports (below 1024)
[settings] Expose CPUID instruction via settings mechanism
[test] Add self-tests for snprintf()
[settings] Allow numeric_setting_value() to handle long setting values
[settings] Expose memory map via settings mechanism
[params] Add support for the general concept of a form parameter list
[cmdline] Add "params" and "param" commands to manage form parameter lists
[uri] Allow URIs to incorporate a parameter list
[http] Add support for HTTP POST
[settings] Make built-in settings a linker table
[linux] Give tap devices a name and bus type
[ipv4] Generalise fragment reassembly mechanism
[netdevice] Increase maximum network-layer address length
[netdevice] Add concept of a network device index
[netdevice] Add method for generating EUI-64 address from link-layer address
[ethernet] Add support for generating multicast hash for IPv6 addresses
[linux] Apply MAC address prior to registering network device
[tcpip] Pass through network device to transport layer protocols
[neighbour] Generalise concept of neighbour discovery
[ipv4] Abstract out protocol-specific portions of "route" command
[ipv6] Replace IPv6 stack
[ipv6] Fix uninitialised-variable warning
[tcp] Reduce path MTU to 1280 bytes
[ipv6] Add inet6_aton()
[build] Work around bug in gcc >= 4.8
[neighbour] Add nstat() function to print out neighbour table
[cmdline] Add "nstat" command
[tcp] Add AF_INET6 socket opener
[udp] Add AF_INET6 socket opener
[netdevice] Add find_netdev_by_index()
[socket] Add concept of a generalised socket address converter
[ipv4] Add IPv4 socket address converter
[ipv6] Add IPv6 socket address converter
[resolv] Use sock_aton() to allow parsing of arbitrary numeric addresses
[icmp] Add support for sending ICMP echo requests
[ping] Add concept of a ping socket
[ping] Add generic ping mechanism
[ping] Add top-level ping() function to ping a host
[cmdline] Add "ping" command
[ipv6] Handle IPv6 option length correctly
[ipv6] Extract link layer addresses from router advertisements
[ipv6] Support stateless address autoconfiguration (SLAAC)
[ipv6] Treat sin6_scope_id consistently
[ipv6] Automatically choose source for link-local and multicast destinations
[pxe] Always retrieve cached DHCPACK and apply to relevant network device
[ipv6] Add ndp_tx_router_solicitation() to send router solicitations
[parseopt] Add parse_timeout()
[netdevice] Make all net_driver methods optional
[interface] Default to calling intf_restart() in response to intf_close()
[job] Allow job_progress() to return an ongoing job status code, if known
[monojob] Add timeout parameter to monojob_wait()
[monojob] Report ongoing job status as overall return status on timeout
[cmdline] Rewrite "sync" command to use monojob_wait()
[autoboot] Fix shell banner timeout
[ifmgmt] Rewrite iflinkwait() to use monojob_wait()
[cmdline] Allow "if<xxx>" commands to take options
[netdevice] Add generic concept of a network device configurator
[dhcp] Add DHCP network device configurator
[parseopt] Add parse_netdev_configurator()
[ifmgmt] Add ifconf() to carry out network device configuration
[autoboot] Use ifconf() to configure network device
[cmdline] Add "ifconf" command
[cmdline] Make "dhcp" command a synonym for "ifconf"
[dhcp] Remove obsolete dhcp() function
[ipv6] Add IPv6 network device configurator
[cmdline] Generate command option help text automatically
[pxe] Ensure cached DHCPACK is retrieved prior to network device creation
[base16] Fix comparison of signed and unsigned integers
[settings] Move user-class setting from dhcp.c to settings.c
[ipv6] Use given source address only if it is not the unspecified address
[ipv6] Add "ipv6" setting type
[dhcpv6] Add basic support for stateful and stateless DHCPv6
[ipv6] Separate the concepts of prefix and address creation
[dhcpv6] Allow stateful DHCPv6 to apply obtained IPv6 addresses
[test] Include failing code within failed test result output
[main] Defer "initialising devices" message until initialising devices
[console] Pass escape sequence context to ANSI escape sequence handlers
[pixbuf] Add generic concept of a pixel buffer
[image] Allow for non-executable image formats
[image] Add image_pixbuf() to create pixel buffer from image
[pnm] Add support for PNM images
[mucurses] Use "<ESC>[2J" ANSI escape sequence to clear screen
[console] Allow console input and output to be disabled independently
[console] Add concept of generic console configuration
[cmdline] Add "console" command to configure console
[fbcon] Add generic concept of a frame buffer console
[vesafb] Add VESA frame buffer console
[vesafb] Include raw status value within VBE error messages
[vesafb] Skip modes for which we cannot get mode information
[vesafb] Return meaningful error when no suitable mode is found
[vesafb] Select an optimal mode, rather than the first acceptable mode
[build] Fix building on OpenBSD 5.4
[console] Allow '?' as an intermediate byte in ANSI escape sequences
[mucurses] Implement curs_set() to control cursor visibility
[settings] Hide cursor when not actively editing a setting
[menu] Hide cursor when displaying menu
[fbcon] Add support for displaying a cursor
[settings] Explicitly separate the concept of a completed fetched setting
[settings] Allow for IPv6 setting types in non-IPv6 builds
[settings] Add fetch_ipv6_setting()
[dns] Add support for resolving IPv6 addresses via AAAA records
[socket] Ensure socket address structure sizes are fixed
[syslog] Add support for IPv6 syslog server
[ipv6] Add support for resolving IPv6 addresses via the "nslookup" command
[linux] Provide access to SMBIOS via /dev/mem
[dhcpv6] Use DUID-UUID form of client DUID
[settings] Force settings into alphabetical order within sections
[settings] Allow for multiple definitions of each predefined setting
[settings] Merge SETTING_IPv4 and SETTING_IPv6
[dhcpv6] Add DHCPv6 "filename" setting
[ipv6] Expose NDP-provided settings (including the DNS server)
[vesafb] Work around data corruption bug in bochs/qemu VBE implementation
[settings] Adapt user interface to fit display size
[login] Adapt user interface to fit display size
[menu] Adapt user interface to fit display size
[console] Allow consoles to update the recorded console size
[fbcon] Update the console width and height after changing mode
[lkrnprefix] Include iPXE version string in image header
[fbcon] Always draw cursor using current foreground and background colours
[console] Add centralised concept of colours and colour pairs
[mucurses] Use centralised concept of colour pairs
[cmdline] Add the "colour" and "cpair" commands
[console] Add concept of a "magic" colour
[vesafb] Set "magic" colour to transparent when a background picture is used
[build] Remove obsolete check for GNU as version 2.9.1
[ipv6] Fix compilation under FreeBSD
[build] Build ROMs used by qemu and VMware as part of "make all"
[libc] Add isprint()
[test] Add okx() macro taking an explicit file name and line number
[deflate] Add support for DEFLATE decompression
[deflate] Fix literal data length calculation
[libc] Add abs()
[uaccess] Add memcmp_user()
[test] Rewrite pnm_ok() using okx()
[test] Generalise pnm_ok() to pixbuf_ok()
[png] Add support for PNG images
[vesafb] Handle failures from fbcon_init()
[fbcon] Centre background picture on console
[fbcon] Allow for an arbitrary margin around the text area
[vesafb] Allow for an arbitrary margin around the text area
[cmdline] Rename "console" command's --bpp option to --depth
[cmdline] Add margin options to the "console" command
[fbcon] Allow ANSI CUP with missing arguments
[cmdline] Always clear screen after reconfiguring console
[intel] Add some missing PCI IDs
[dns] Support DNS search lists
[dns] Update end-of-name pointer after processing CNAME record
[dhcp] Copy exactly the required length when resizing DHCP options
[settings] Remove "uristring" setting type
[params] Use reference counters for form parameter lists
[uri] Refactor URI parsing and formatting
[image] Ensure every image has a fully resolved URI
[tcpip] Add IP statistics collection as per RFC 4293
[cmdline] Add the "ipstat" command
[prefix] Ignore PCI autoboot device location if set to 00:00.0
[tcpip] Provide tcpip_netdev() to determine the transmitting network device
[tcpip] Provide tcpip_mtu() to determine the maximum transmission unit
[tcp] Calculate correct MSS from peer address
[bzimage] Report exact initrd length via bzImage header
[realtek] Include link status register details in debug messages
[romprefix] Do not clobber stack segment when returning to BIOS
[netdevice] Mark devices as open before calling open() method
[tcp] Update window even if ACK does not acknowledge new data
[linux] Avoid starting currticks() from zero every time
[http] Use a retry timer to trigger retried requests
[http] Automatically retry request on a 503 Service Unavailable
[mii] Add mii_dump() to dump all MII registers
[realtek] Dump all MII register contents when link status changes
[monojob] Reset timeout when progress is made
[image] Add "--timeout" parameter to image downloading commands
[efi] Allow for 64-bit EFI_STATUS codes
[efi] Allow driver to be unloaded
[efi] Connect driver to devices as part of installation
[console] Fix display of characters with top bit set
[lotest] Allow loopback testing on shared networks
[netdevice] Notify upper-layer drivers when RX processing is (un)frozen
[efi] Avoid accidentally calling main() twice
[efi] Unload our own image before exiting UEFI application
[efi] Disable SNP devices when running iPXE as the application
[realtek] Add ability to dump all internal registers
[realtek] Clear bit 24 of RCR
[bios] Fix screen clearing on even more buggy BIOSes
[http] Accept Content-Length header with trailing whitespace
[crypto] Remove dynamically-allocated storage for certificate name
[crypto] Remove dynamically-allocated storage for certificate OCSP URI
[build] Remove long-obsolete mechanism for wrapping embedded images
[build] Disable ccache for all relevant build targets
[build] Add dependency of generated files upon Makefile
[crypto] Add pubkey_match() to check for matching public/private key pairs
[crypto] Generalise X.509 cache to a full certificate store
[crypto] Use fingerprint when no common name is available for debug messages
[crypto] Allow signed timestamp error margin to be configured at build time
[test] Rewrite X.509 tests using okx()
[test] Rewrite CMS tests using okx()
[test] Add tests for x509_check_name()
[test] Add subject alternative names to X.509 server test certificate
[crypto] Add support for subjectAltName and wildcard certificates
[crypto] Allow wildcard matches on commonName as well as subjectAltName
[intel] Avoid completely filling the TX descriptor ring
[test] Rewrite TCP/IP tests using okx()
[test] Add self-tests for flsl()
[libc] Add inline assembly implementation of flsl() using BSR instruction
[test] Add tests for 64-bit division
[build] Fix __libgcc attribute for recent gcc versions
[test] Check for correct -mrtd assumption on libgcc arithmetic functions
[libc] Add isqrt() function to find integer square roots
[libc] Add flsll()
[profile] Add generic profiling infrastructure
[cmdline] Add "profstat" command to display profiling statistics
[netdevice] Profile common operations
[intel] Profile common virtual machine operations
[intel] Push new RX descriptors in batches
[librm] Use genuine real mode to accelerate operation in virtual machines
[ipv4] Profile transmit and receive datapaths
[tcp] Profile transmit and receive datapaths
[http] Profile receive datapath
[downloader] Profile receive datapath
[build] Allow for a debug level of zero
[librm] Allow interrupts in protected mode
[comboot] Use built-in interrupt reflector
[pcbios] Do not switch to real mode to check for timer interrupt
[pcbios] Do not switch to real mode to sleep the CPU
[test] Print out profiling statistics after a successful test run
[librm] Add a profiling self-test for measuring mode transition times
[librm] Add meaningful labels at section changes
[librm] Speed up protected-to-real mode transition under KVM
[librm] Speed up real-to-protected mode transition under KVM
[librm] Speed up protected-mode calls under KVM
[profile] Provide methods for profiling individual stages of operations
[librm] Add profiling self-tests for complete real_call and prot_call cycles
[pxe] Profile all PXE API calls
[pxe] Profile UNDI transmit datapath
[pxe] Work around missing PXENV_UNDI_OPEN only when necessary
[undi] Profile all PXE API calls
[undi] Profile transmit and receive datapaths
[undi] Report any PXENV_UNDI_ISR errors via netdev_rx_err()
[undi] Do not switch to real mode to check for NIC interrupt
[undi] Place an upper limit on the number of PXENV_UNDI_ISR calls per poll
Peter Pickford (1):
[serial] Enable UART FIFOs
Robin Smidsrød (2):
[settings] Add "version" builtin setting
[build] Include ipxe.pxe in default build
Stefan Hajnoczi (2):
[netdevice] Add vlan_tag() to get the VLAN tag of a network device
[iscsi] Include 802.1Q VLAN identifier in iBFT
Thomas Miletich (3):
[3c90x] Stall upload engine before setting RX ring address
[3c90x] Don't round up transmit packet length
[3c90x] Fix High-MTU packet reception
lolipop (1):
[intel] Add Intel I217 Gigabit Ethernet PCI ID
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|