Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control
Block Address and Counter Read Block Address fields of the GTDT table should be
set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0.
Fixes: 41041e5708 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Step 3 from bios-tables-test.c documented procedure.
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20220920162137.75239-2-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Make vhost-user-blk backwards compatible when migrating from older VMs
running with modern features turned off, the same way it was done for
virtio-blk in 20764be042 ("virtio-blk: set config size depending on the features enabled")
It's currently impossible to migrate from an older VM with
vhost-user-blk (with disable-legacy=off) because of errors like this:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load virtio-blk:virtio
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:05.0:00.0:02.0/virtio-blk'
qemu-system-x86_64: load of migration failed: Invalid argument
This is caused by the newer (destination) VM requiring a bigger BAR0
alignment because it has to cover a bigger configuration space, which
isn't actually needed since those additional config fields are not
active (write-zeroes/discard).
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-6-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No reason to have this be a separate field. This also makes it more akin
to what the virtio-blk device does.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to have the ability to disable these features for
compatibility with older VMs that don't have these implemented.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-4-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can reuse it for other virtio-blk devices, e.g
vhost-user-blk, which currently does not control its config space size
dynamically.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't have a virtio-gpio implementation in QEMU and only
support a vhost-user backend. The QEMU side of the code is minimal so
it should be enough to instantiate the device and pass some vhost-user
messages over the control socket. To do this we hook into the existing
vhost-user-test code and just add the bits required for gpio.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20220408155704.2777166-1-alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-23-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As we expand this test for more virtio devices we will need to support
different feature sets. Add a mandatory op field to fetch the list of
features needed for the test itself.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-22-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't implement the full solution because frankly none of the tests
need to at the moment. We may end up re-implementing libvhostuser in
the end.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-21-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No device driver (which is what the qvirtio_ access functions
represent) should be setting UNUSED(30) in the feature space. Although
existing libqos users mask it out lets ensure nothing sneaks through.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-20-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
checkpatch.pl warns that non-plain asserts should be avoided so
convert the check to a plain g_assert.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-19-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need to action every message but lets document the ones we
are expecting to consume so future tests don't get confused about
unhandled bits.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-18-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user tests respawn qos-test as a standalone process. As a
result the gtester framework squashes all messages coming out of it
which make it hard to debug. As the test does not care about asserting
certain messages just convert the tests to use the direct qos_printf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-17-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hangs have been observed in the tests and currently we don't timeout
if a subprocess hangs. Rectify that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220802095010.3330793-16-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When trying to work out what the virtio-net-tests where doing it was
hard because the g_test_trap_subprocess redirects all output to
/dev/null. Lift this restriction by using the appropriate flags so you
can see something similar to what the vhost-user-blk tests show when
running.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220407150042.2338562-1-alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-15-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-gpio device as part of a PCI
bus. It is mostly boilerplate which looks pretty similar to the
vhost-user-fs-pci device.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5f560cab92d0d789b1c94295ec74b9952907d69d.1641987128.git.viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-gpio device which connects
to the remote daemon. It is based of vhost-user-i2c code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org>
[AJB: fixes for qtest, tweaks to feature bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
All the boilerplate virtio code does the same thing (or should at
least) of checking to see if the VM is running before attempting to
start VirtIO. Push the logic up to the common function to avoid
getting a copy and paste wrong.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are useful for tracing the lifetime of vhost-user connections.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-10-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If the guest driver attempts to use the UNUSED(30) bit it is
potentially buggy as 6.3 Legacy Interface: Reserved Feature Bits
states it "SHOULD NOT be negotiated". For now just log this guest
error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Try and explicitly document the various state of feature bits as
related to the vhost_dev structure. Importantly the backend_features
can advertise things like VHOST_USER_F_PROTOCOL_FEATURES which is
never exposed to the driver and is only present in the vhost-user
feature negotiation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When debugging a new vhost user you may be surprised to see
VHOST_USER_F_PROTOCOL getting squashed in the maze of
backend_features, acked_features and guest_features. Expand the
description here to help the next poor soul trying to work through
this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are some extra bits used over a vhost-user connection which are
hidden from the device itself. We need to set them here to ensure we
enable things like the protocol extensions.
Currently net/vhost-user.c has it's own inscrutable way of persisting
this data but it really should live in the core vhost_user code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220726192150.2435175-7-alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field is unused (only ever set, but never read) since commit
ac9185603. Additionally, the commit message of commit 34fa110e already
explained earlier why it's unreliable. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220923142838.91043-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These public functions are not used anywhere, thus can be dropped.
Also, since this is the final job API that doesn't use AioContext
lock and replaces it with job_lock, adjust all remaining function
documentation to clearly specify if the job lock is taken or not.
Also document the locking requirements for a few functions
where the second version is not removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-22-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These public functions are not used anywhere, thus can be dropped.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not sure what the atomic here was supposed to do, since job.busy
is protected by the job lock. Since the whole function
is called under job_mutex, just remove the atomic.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-20-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the job_{lock/unlock} and macros to use job_mutex.
Now that they are not nop anymore, remove the aiocontext
to avoid deadlocks.
Therefore:
- when possible, remove completely the aiocontext lock/unlock pair
- if it is used by some other function too, reduce the locking
section as much as possible, leaving the job API outside.
- change AIO_WAIT_WHILE in AIO_WAIT_WHILE_UNLOCKED, since we
are not using the aiocontext lock anymore
The only functions that still need the aiocontext lock are:
- the JobDriver callbacks, already documented in job.h
- job_cancel_sync() in replication.c is called with aio_context_lock
taken, but now job is using AIO_WAIT_WHILE_UNLOCKED so we need to
release the lock.
Reduce the locking section to only cover the callback invocation
and document the functions that take the AioContext lock,
to avoid taking it twice.
Also remove real_job_{lock/unlock}, as they are replaced by the
public functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-19-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some callbacks implementation use bdrv_* APIs that assume the
AioContext lock is held. Make sure this invariant is documented.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-18-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iostatus is the only field (together with .job) that needs
protection using the job mutex.
It is set in the main loop (GLOBAL_STATE functions) but read
in I/O code (block_job_error_action).
In order to protect it, change block_job_iostatus_set_err
to block_job_iostatus_set_err_locked(), always called under
job lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-17-eesposit@redhat.com>
[kwolf: Fixed up type of iostatus]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They all are called with job_lock held, in job_event_*_locked()
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-16-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The same job lock is being used also to protect some of blockjob fields.
Categorize them just as done in job.h.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-15-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to make it thread safe, implement a "fake rwlock",
where we allow reads under BQL *or* job_mutex held, but
writes only under BQL *and* job_mutex.
The only write we have is in child_job_set_aio_ctx, which always
happens under drain (so the job is paused).
For this reason, introduce job_set_aio_context and make sure that
the context is set under BQL, job_mutex and drain.
Also make sure all other places where the aiocontext is read
are protected.
The reads in commit.c and mirror.c are actually safe, because always
done under BQL.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-14-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to make sure access of job->aio_context is always done
under either BQL or job_mutex. The problem is that using
aio_co_enter(job->aiocontext, job->co) in job_start and job_enter_cond
makes the coroutine immediately resume, so we can't hold the job lock.
And caching it is not safe either, as it might change.
job_start is under BQL, so it can freely read job->aiocontext, but
job_enter_cond is not.
We want to avoid reading job->aio_context in job_enter_cond, therefore:
1) use aio_co_wake(), since it doesn't want an aiocontext as argument
but uses job->co->ctx
2) detect possible discrepancy between job->co->ctx and job->aio_context
by checking right after the coroutine resumes back from yielding if
job->aio_context has changed. If so, reschedule the coroutine to the
new context.
Calling bdrv_try_set_aio_context() will issue the following calls
(simplified):
* in terms of bdrv callbacks:
.drained_begin -> .set_aio_context -> .drained_end
* in terms of child_job functions:
child_job_drained_begin -> child_job_set_aio_context -> child_job_drained_end
* in terms of job functions:
job_pause_locked -> job_set_aio_context -> job_resume_locked
We can see that after setting the new aio_context, job_resume_locked
calls again job_enter_cond, which then invokes aio_co_wake(). But
while job->aiocontext has been set in job_set_aio_context,
job->co->ctx has not changed, so the coroutine would be entering in
the wrong aiocontext.
Using aio_co_schedule in job_resume_locked() might seem as a valid
alternative, but the problem is that the bh resuming the coroutine
is not scheduled immediately, and if in the meanwhile another
bdrv_try_set_aio_context() is run (see test_propagate_mirror() in
test-block-iothread.c), we would have the first schedule in the
wrong aiocontext, and the second set of drains won't even manage
to schedule the coroutine, as job->busy would still be true from
the previous job_resume_locked().
The solution is to stick with aio_co_wake() and detect every time
the coroutine resumes back from yielding if job->aio_context
has changed. If so, we can reschedule it to the new context.
Check for the aiocontext change in job_do_yield_locked because:
1) aio_co_reschedule_self requires to be in the running coroutine
2) since child_job_set_aio_context allows changing the aiocontext only
while the job is paused, this is the exact place where the coroutine
resumes, before running JobDriver's code.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220926093214.506243-13-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the API offers also _locked() functions, take advantage
of it and give also the caller control to take the lock and call
_locked functions.
This makes sense especially when we have for loops, because it
makes no sense to have:
for(job = job_next(); ...)
where each job_next() takes the lock internally.
Instead we want
JOB_LOCK_GUARD();
for(job = job_next_locked(); ...)
In addition, protect also direct field accesses, by either creating a
new critical section or widening the existing ones.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-12-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Once job lock is used and aiocontext is removed, mirror has
to perform job operations under the same critical section,
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-11-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing job synchronization in the unit tests, with
explicit locks.
We are deliberately using _locked functions wrapped by a guard
instead of a normal call because the normal call will be removed
in future, as the only usage is limited to the tests.
In other words, if a function like job_pause() is/will be only used
in tests to avoid:
WITH_JOB_LOCK_GUARD(){
job_pause_locked();
}
then it is not worth keeping job_pause(), and just use the guard.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both blockdev.c and job-qmp.c have TOC/TOU conditions, because
they first search for the job and then perform an action on it.
Therefore, we need to do the search + action under the same
job mutex critical section.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just as done with job.h, create _locked() functions in blockjob.h
These functions will be later useful when caller has already taken
the lock. All blockjob _locked functions call job _locked functions.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This comment applies more on job, it was left in blockjob as in the past
the whole job logic was implemented there.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-7-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With "intact" we mean that all job.h functions implicitly
take the lock. Therefore API callers are unmodified.
This means that:
- many static functions that will be always called with job lock held
become _locked, and call _locked functions
- all public functions take the lock internally if needed, and call _locked
functions
- all public functions called internally by other functions in job.c will have a
_locked counterpart (sometimes public), to avoid deadlocks (job lock already taken).
These functions are not used for now.
- some public functions called only from exernal files (not job.c) do not
have _locked() counterpart and take the lock inside. Others won't need
the lock at all because use fields only set at initialization and
never modified.
job_{lock/unlock} is independent from real_job_{lock/unlock}.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same as AIO_WAIT_WHILE macro, but if we are in the Main loop
do not release and then acquire ctx_ 's aiocontext.
Once all Aiocontext locks go away, this macro will replace
AIO_WAIT_WHILE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
job_event_* functions can all be static, as they are not used
outside job.c.
Same applies for job_txn_add_job().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Categorize the fields in struct Job to understand which ones
need to be protected by the job mutex and which don't.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220926093214.506243-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
job mutex will be used to protect the job struct elements and list,
replacing AioContext locks.
Right now use a shared lock for all jobs, in order to keep things
simple. Once the AioContext lock is gone, we can introduce per-job
locks.
To simplify the switch from aiocontext to job lock, introduce
*nop* lock/unlock functions and macros.
We want to always call job_lock/unlock outside the AioContext locks,
and not vice-versa, otherwise we might get a deadlock. This is not
straightforward to do, and that's why we start with nop functions.
Once everything is protected by job_lock/unlock, we can change the nop into
an actual mutex and remove the aiocontext lock.
Since job_mutex is already being used, add static
real_job_{lock/unlock} for the existing usage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220926093214.506243-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221006122607.162769-1-kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
