The CLINT (Core Local Interruptor) device provides real-time clock, timer
and interprocessor interrupts based on SiFive's CLINT specification.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Holds the state of a heterogenous array of RISC-V hardware threads.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
HTIF (Host Target Interface) provides console emulation for QEMU. HTIF
allows identical copies of BBL (Berkeley Boot Loader) and linux to run
on both Spike and QEMU. BBL provides HTIF console access via the
SBI (Supervisor Binary Interface) and the linux kernel SBI console.
The HTIT chardev implements the pre qom legacy interface consistent
with the 16550a UART in 'hw/char/serial.c'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
The RISC-V HTIF (Host Target Interface) console device requires access
to the symbol table to locate the 'tohost' and 'fromhost' symbols.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Implementation of linux user emulation for RISC-V.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Implements the physical memory protection extension as specified in
Privileged ISA Version 1.10.
PMP (Physical Memory Protection) is as-of-yet unused and needs testing.
The SiFive verification team have PMP test cases that will be run.
Nothing currently depends on PMP support. It would be preferable to keep
the code in-tree for folk that are interested in RISC-V PMP support.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daire McNamara <daire.mcnamara@emdalo.com>
Signed-off-by: Ivan Griffin <ivan.griffin@emdalo.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
TCG code generation for the RV32IMAFDC and RV64IMAFDC. The QEMU
RISC-V code generator has complete coverage for the Base ISA v2.2,
Privileged ISA v1.9.1 and Privileged ISA v1.10:
- RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
- RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
- RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
GDB Register read and write routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Helper routines for FPU instructions and NaN definitions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Privileged control and status register helpers and page fault handling.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
The RISC-V disassembler has no dependencies outside of the 'disas'
directory so it can be applied independently. The majority of the
disassembler is machine-generated from instruction set metadata:
- https://github.com/michaeljclark/riscv-meta
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: space prohibited between function name and open parenthesis '('
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Add CPU state header, CPU definitions and initialization routines
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Leave the DEBUG_TIS for more debugging and convert to use if (DEBUG_TIS)
rather than #if DEBUG_TIS where it is being used.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Use types that are defined by QEMU in trace events caused build failures
for the UST trace backend:
In file included from trace-ust-all.c:13:0:
trace-ust-all.h:11844:206: error: unknown type name ‘hwaddr’
It only knows about C built-in types, and any types that are pulled in
from includs of qemu-common.h and lttng/tracepoint.h. This does not
include the 'hwaddr' type, so replace it with a uint64_t which is what
exec/hwaddr.h defines 'hwaddr' as. This fixes the build failure
introduced by
commit 9eb8040c2d
Author: Peter Maydell <peter.maydell@linaro.org>
Date: Fri Mar 2 10:45:39 2018 +0000
hw/misc/tz-ppc: Model TrustZone peripheral protection controller
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180306134317.836-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues with the documentation of the --balloon parameter:
First, "--balloon none" is simply doing nothing. Even if a machine had a
balloon device by default, this option is not disabling anything, it is
simply ignored. Thus let's simply drop this option from the documentation
to avoid to confuse the users (but keep the code in vl.c for backward
compatibility).
Second, the documentation claims that "--balloon virtio" is the default
mode, but this is not true anymore since commit 382f074371.
Since that commit, the option also has no real use case anymore, since
you can simply use "--device virtio-balloon" nowadays instead. Thus to
simplify our complex parameter zoo a little bit, let's deprecate the
the parameter now and tell the user to use "--device virtio-balloon"
instead.
Fixes: 382f074371
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improves the usage of the InterruptNotification registration by skipping the
additional call to WHvSetVirtualProcessorRegisters if we have already
registered for the window exit.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-9-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
The use of WHvGetExitContextSize will break ABI compatibility if the platform
changes the context size while a qemu compiled executable does not recompile.
To avoid this we now use sizeof and let the platform determine which version
of the struction was passed for ABI compatibility.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-8-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
Fixes an issue where if the tpr is assigned to the array but not a different
value from what is already expected on the vp the code will skip incrementing
the reg_count. In this case its possible that we set an invalid memory section
of the next call for DeliverabilityNotifications that was not expected.
The fix is to use a local variable to store the temporary tpr and only update
the array if the local tpr value is different than the vp context.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-7-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
Renames the usage of 'memio' to 'mmio' in the emulator callbacks.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-6-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
The code already is holding the qemu_mutex for the IO thread. We do not need
to additionally take the lock again in this case.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-5-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
Minor code cleanup. The calls to __debugbreak() are not required and should
no longer be used to prevent unnecessary breaks.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-4-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
1. Fixes the changes required to the WHvTryMmioEmulation, WHvTryIoEmulation, and
WHvEmulatorCreateEmulator based on the new VpContext forwarding.
2. Removes the WHvRunVpExitReasonAlerted case.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-3-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
Fixes an issue where the SDK that was releases had a different casing for the
*.h and *.lib files causing a build break if linked directly from Windows Kits.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1519665216-1078-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
This reverts commit 906548689e.
Even with -Og, the debug experience is noticeably worse
because gdb shows a lot more "<optimised out>" variables and
function arguments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding check for `while` and `for` statements, which condition has more than
one line.
The former checkpatch.pl can check `if` statement, which condition has more
than one line, whether block misses brace round, like this:
'''
if (cond1 ||
cond2)
statement;
'''
But it doesn't do the same check for `for` and `while` statements.
Using `(?:...)` instead of `(...)` in regex pattern catch.
Because `(?:...)` is faster and avoids unwanted side-effect.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Message-Id: <1520319890-19761-1-git-send-email-suhang16@mails.ucas.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_path_get_* do the same as g_strdup(basename/dirname(...)) but
without modifying the argument.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519987399-19160-1-git-send-email-jusual@mail.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_rw is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, transform flatview_rw
into address_space_rw, since flatview_rw is otherwise unused.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_map is calling address_space_to_flatview but it can
be called outside the RCU lock. The function itself is calling
rcu_read_lock/rcu_read_unlock, just in the wrong place, so the
fix is easy.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_access_valid is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_access_valid to address_space_access_valid.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_read is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_read_full to address_space_read's constant size
fast path and address_space_read_full.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_write is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_write to address_space_write.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These accessors are called from inlined functions, and the call sequence
is much more expensive than just inlining the access. Move the
struct declaration to memory-internal.h so that exec.c and memory.c
can both use an inline function.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MemoryListener is registered on address_space_memory, there is
not much to assert. This currently works because the callback
is invoked only once when the listener is registered, but section->fv
is the _new_ FlatView, not the old one on later calls and that
would break.
This confines address_space_to_flatview to exec.c and memory.c.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Need to free TCPChardevTelnetInit when session established.
Since at it, switch to use G_SOURCE_* macros.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180301084438.13594-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following ASAN reports:
==20125==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f0faea03a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f0fae450f75 in g_malloc0 ../glib/gmem.c:124
#2 0x562fffd526fc in machine_start /home/elmarco/src/qemu/tests/sdhci-test.c:180
Indirect leak of 152 byte(s) in 1 object(s) allocated from:
#0 0x7f0faea03850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f0fae450f0c in g_malloc ../glib/gmem.c:94
#2 0x562fffd5d21d in qpci_init_pc /home/elmarco/src/qemu/tests/libqos/pci-pc.c:122
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes the following ASAN report:
Direct leak of 128 byte(s) in 8 object(s) allocated from:
#0 0x7fefce311850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7fefcdd5ef0c in g_malloc ../glib/gmem.c:94
#2 0x559b976faff0 in create_ahci_io_test /home/elmarco/src/qemu/tests/ahci-test.c:1810
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current GCC has an optimization bug when compiling with ASAN.
See also GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84307
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 218bb57dd7, the -fsanitize=address
check fails with:
config-temp/qemu-conf.c:3:20: error: integer overflow in expression [-Werror=overflow]
return INT32_MIN / -1;
Interestingly, UBSAN check doesn't produce a compile time warning.
Use a test that doesn't have compile time warnings, and make it
specific to UBSAN check.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-2-marcandre.lureau@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.
This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.
Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.
This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ObjectPropertyInfo is more generic and only missing @description.
This adds a description to ObjectPropertyInfo and removes
DevicePropertyInfo so the resulting ObjectPropertyInfo can be used
elsewhere.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These options have been marked in a comment in qemu-options.hx as
deprecated in 2009 already (see commit 1ed2fc1fa3), but we
never informed the users about these deprecations. Let's catch up
on that omission now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519138892-12836-1-git-send-email-thuth@redhat.com>
[Fix messages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can never happen for single-threaded TCG that we have more than one
CPU in the list, while the first one has not been marked as "created".
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180209195239.16048-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
