Useful to send guest data back to QEMU.
Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
to the following patches:
- loader: Allow a custom AddressSpace when loading ROMs
- loader: Add AddressSpace loading support to uImages
- loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
rather than performing a partial write before setting the error bit: see
the (len != dma.length) condition
- document the write interface
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.
While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.
Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
It consolidates memory hotplug AML in one place within DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch provides ATSR which was a requirement for software that
wants to enable ATS on endpoint devices behind a Root Port. This is
done simply by setting ALL_PORTS which indicates all PCI-Express Root
Ports support ATS transactions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Commit 3e76099aac ("loader: Allow a custom AddressSpace when loading
ROMs") introduced the "Rom.as" field:
(1) It modified the utility callers of rom_insert() to take "as" as a
new parameter from *their* callers, and set "rom->as" from that
parameter. The functions covered were rom_add_file() and
rom_add_elf_program().
(2) It also modified rom_insert() itself, to auto-assign
"&address_space_memory", in case the external caller passed -- and
the utility caller forwarded -- as=NULL.
Except, commit 3e76099aac forgot to update the third utility caller of
rom_insert(), under point (1), namely rom_add_blob().
* Later, commit 5e774eb3bd ("loader: Add AddressSpace loading support
to uImages") added the load_uimage_as() function, and the
rom_add_blob_fixed_as() function-like macro, with the necessary changes
elsewhere to propagate the new "as" parameter to rom_add_blob():
load_uimage_as()
load_uboot_image()
rom_add_blob_fixed_as()
rom_add_blob()
At this point, the signature (and workings) of rom_add_blob() had been
broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
parameter to rom_add_blob() as "callback_opaque". Given that the
"fw_callback" parameter itself was set to NULL (correctly), this did no
additional damage (the opaque arg would never be used), but ultimately
it broke the new functionality of load_uimage_as().
* The load_uimage_as() function would be put to use in one of the later
patches, commit e481a1f63c ("generic-loader: Add a generic loader").
* We can fix this only in a unified patch now. Append "AddressSpace *as"
to the signature of rom_add_blob(), and handle the new parameter. Pass
NULL from all current callers, except from rom_add_blob_fixed_as(),
where "_as" has to be bumped to the proper position.
* Note that rom_add_file() rejects the case when both "mr" and "as" are
passed in as non-NULL. The action that this is apparently supposed to
prevent is the
rom->mr = mr;
assignment (that's the only place where the "mr" parameter is used in
rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
and the actions done on the fw_cfg branch:
if (fw_file_name && fw_cfg) {
if (mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
mr = rom->mr;
} else {
data = rom->data;
}
reflect those that are performed by rom_add_file() too (with mr==NULL):
if (rom->fw_file && fw_cfg) {
if ((!option_rom || mc->option_rom_has_mr) &&
mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
} else {
data = rom->data;
}
Hence we need no additional restrictions in rom_add_blob().
* Stable is not affected as both problematic commits appeared first in
v2.8.0-rc0.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Fixes: 5e774eb3bd
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code that calculates the legacy ACPI table size for migration
compatibility uses max_cpus when calculating legacy_aml_len (the size of
the DSDT and SSDT tables). However, the SSDT grows according to APIC ID
limit, not max_cpus.
The bug is not triggered very often because of the 4k alignment on the
table size. But it can be triggered if you are unlucky enough to cross a
4k boundary.
Change the legacy_aml_len calculation to use apic_id_limit, to calculate
the right size.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should not use cpu_to_le16() here, instead each of device/function
value is stored in a 8 byte field.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce this field to control whether ACPI build is enabled by a
particular machine or accelerator.
It defaults to true if the machine itself supports ACPI build. Xen
accelerator will disable it because Xen is in charge of building ACPI
tables for the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
_GPE.E04 is dedicated for nvdimm device hotplug
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug
As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.
@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access
As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an ACPI Namespace Device under
the root device
So it builds nvdimm devices for all slots to support vNVDIMM hotplug
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The free_ranges array is used as a temporary pointer array, the segment
should still be freed, however, it shouldn't free the elements themself.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
In build_crs(), the calculation and merging of the ranges already happens
in 64-bit, but the entry boundaries are silently truncated to 32-bit in the
call to aml_dword_memory(). Fix it by handling the 64-bit MMIO ranges separately.
This fixes 64-bit BARs behind PXBs.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of always passing both IO and MEM ranges when
computing CRS ranges, define a new CrsRangeSet structure
that include them both.
This is done before introducing a third type of range,
64-bit MEM, so it will be easier to pass them all around.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PXBs do not support hotplug so they don't have a PCNT function.
Since the PXB's PCI root-bus is a child bus of bus 0, the
build_dsdt code will add a call to the corresponding PCNT function.
Fix this by skipping the PCNT call for the above case.
While at it skip also PCIe child buses.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To enable interrupt remapping for intel IOMMU device, each IOAPIC device
in the system reported via ACPI MADT must be explicitly enumerated under
one specific remapping hardware unit. This patch adds the root-complex
IOAPIC into the default DMAR device.
Please refer to VT-d spec 8.3.1.1 for more information.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In ACPI DMA remapping report structure, enable INTR flag when specified.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of searching the device tree every time, one static variable is
declared for the default system x86 IOMMU device.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.
Three users:
* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
only pci_info.w32 is actually used. This is confusing. Replace by
Range pci_hole.
* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
from acpi_get_pci_info() to build_dsdt(). Replace by two variables
Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to
acpi_get_pci_holes().
PcPciInfo is now unused; drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
5803fce pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
1. node by cpu index -> node by apic id
i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
2. apic id -> srat entry PMX
PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
1. numa_info[x].node_cpu -> PMX value using index
in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.
That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.
While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.
Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the ACPI table construction tools to create an ACPI entry
for IPMI. This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists. It also adds a dummy function if IPMI
is not compiled in.
This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It should help to make clear that bios_linker works in terms
of offsets within a file. Also it should prevent mistakes
where user passes as arguments pointers to unrelated to file blobs.
While at it, considering that it's a ACPI checksum and
it's initial value must be 0, move checksum field zeroing
into bios_linker_loader_add_checksum() instead of doing it
at every call site manually before bios_linker_loader_add_checksum()
is called.
In addition add extra boundary checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cleanup bios_linker_loader_add_pointer() API by switching
arguments to taking offsets relative to corresponding files
instead of doing pointer arithmetic on behalf of user which
were confusing.
Also make offset inside of source file explicit in API
so that user won't have to manually set it in
destination file blob and while at it add additional
boundary checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the time build_tpm_tcpa() is called the tcpalog size is
always 0, so log_area_start_address which is actually offset
from the start of ACPI_BUILD_TPMLOG_FILE is always 0.
Also as 'TCPA' is allocated 0 filled, there is no point
in calculating always 0 log_area_start_address and set
tcpa->log_area_start_address to it since the field should
always point to start of ACPI_BUILD_TPMLOG_FILE.
Make code easier to read dropping not needed offset
calculations.
While at that move tcpalog allocation closer to the code
that defines its size.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'table' argument in bios_linker_add_foo() commands is
a data blob of one of files also passed to the same API.
So instead of passing blob in every API call, add and keep
file name association with related blob at bios_linker_loader_alloc()
time.
And find blob by name looking up allocated file entries
inside of bios_linker_add_foo() commands.
It will:
- make API less confusing,
- enforce calling bios_linker_loader_alloc() before
calling any bios_linker_add_foo()
- make sure that blob is the correct one, i.e.
associated with the right file name
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patch just changes type of of linker variables to
a structure, there aren't any functional changes.
Converting linker to a structure will allow to extend
it functionality in follow up patch adding sanity blob
checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In legacy cpu-hotplug ProcessorID == APIC ID is used
in MADT and cpu-hotplug AML. It was fine as both
are 8bit and unique. Spec depricated Processor()
with corresponding ProcessorID and advises to use
Device() and UID instead of it.
However UID is just 32bit and it can't fit ARM's
arch_id(MPIDR) which is 64bit. Also in case of
sparse arch_id() distribution, managment/lookup
of maps by arch_id(APIC ID/MPIDR) becomes complex
and expensive.
In preparation to common CPU hotplug with ARM
and to simplify lookup in possible_cpus[] map
switch ProcessorID to possible_cpus index in
MADT.
Legacy cpu-hotplug considerations:
HW interface of it is APIC ID based bitmask so
it's impossible to change, also CPON package in
AML also APIC ID based as well all the methods.
To avoid massive rewrite of AML keep is so and
just break assumption that ProcessorID == APIC ID,
ammending CPU_MAT_METHOD to accept APIC ID and
possible_cpus index, it needs them both to patch
MADT entry template. Also switch to possible_cpus
index Processor(ProcessorID) AML.
That way changes to MADT/AML are minimal and kept
inside AML/MADT not affecting external interfaces.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
since IO block used by CPU hotplug is fixed size and
initialized it the same file as build_legacy_cpu_hotplug_aml()
just use ACPI_GPE_PROC_LEN directly instead of passing
it around in several files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
move the former SSDT part of CPU hoplug close to DSDT part.
AML is only moved but there isn't any functional change.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI spec requires GPE handlers only for GPE events
that hardware implements.
So remove AML for not supported by QEMU device model
events.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Move acpi_build_srat_memory to common place so that it could be reused
by ARM. Rename it to build_srat_memory.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI spec says that Proximity Domain is an "Integer that represents
the proximity domain to which the processor belongs". So define it as a
uint32_t.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQ 5 used by TPM conflicts with PNP0C0F IRQs,
as result Windows fails driver initialization with reason
'device cannot find enough free resources'
But if TPM._CRS.IRQ entry is commented out, Windows
seems to initialize driver without errors as it doesn't
notice possible conflict and it seems to work
probably due to a link with IRQ 5 being unused/disabled.
So temporary comment out TPM._CRS.IRQ to 'fix'
regression in TPM, with intent to fix it correctly
later i.e.:
1. pick unused IRQ as default one for TPM
2. fetch IRQ value from device model so that user
could override default one if it conflicts with
some other device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
