If a guest sends an empty string paramater to any 9P operation, the current
code unmarshals it into a V9fsString equal to { .size = 0, .data = NULL }.
This is unfortunate because it can cause NULL pointer dereference to happen
at various locations in the 9pfs code. And we don't want to check str->data
everywhere we pass it to strcmp() or any other function which expects a
dereferenceable pointer.
This patch enforces the allocation of genuine C empty strings instead, so
callers don't have to bother.
Out of all v9fs_iov_vunmarshal() users, only v9fs_xattrwalk() checks if
the returned string is empty. It now uses v9fs_string_size() since
name.data cannot be NULL anymore.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
[groug, rewritten title and changelog,
fix empty string check in v9fs_xattrwalk()]
Signed-off-by: Greg Kurz <groug@kaod.org>
Needed to make sure usb redirection is prepared to actually handle the
callback from the usb host adapter. Without this interrupt endpoints
don't work on xhci.
Note: On ehci the usb_wakeup() call only schedules a BH for the actual
work, which hides this bug because the allocation happens before ehci
calls back even without this patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
snprintf return value is *not* the number of chars written into the
buffer, but the number of chars needed. So in case the buffer is too
small you can go alloc a bigger one and try again. But that also means
you can't simply use the return value for the next snprintf call
without checking beforehand that things did actually fit.
Problem is that usb_desc_create_serial didn't perform that check, so a
loooong path string (can happen with deep pci-bridge nesting) results in
the third snprintf call smashing the stack.
Fix this by throwing out all the snpintf calls and use g_strdup_printf
instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1381630
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com
All callsites have a XHCIEPContext pointer anyway, so we can just pass
it directly instead of fiddeling with slotid and epid.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-9-git-send-email-kraxel@redhat.com
xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid. So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com
xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams. xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work. But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.
So remove static XHCITransfer array from XHCIEPContext. Use a linked
list instead, and allocate/free XHCITransfer as needed. Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs. That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.
New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com
EV_QUEUE must not change because an array of that size is part of live
migration data. Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com
Needed to avoid we run in circles forever in case the guest builds
an endless loop with link trbs.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
The Trigger Mode field of IOAPIC must match the Trigger Mode in
the IRTE according to VT-d Spec 5.1.5.1.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_scsi_bad_req() function is called when a guest sends a
request with missing or ill-sized headers. This generally happens
when the virtio_scsi_parse_req() function returns an error.
With this patch, virtio_scsi_bad_req() will mark the device as broken,
detach the request from the virtqueue and free it, instead of forcing
QEMU to exit.
In nearly all locations where virtio_scsi_bad_req() is called, the only
thing to do next is to return to the caller.
The virtio_scsi_handle_cmd_req_prepare() function is an exception though.
It is called in a loop by virtio_scsi_handle_cmd_vq() and passed requests
freshly popped from a cmd virtqueue; virtio_scsi_handle_cmd_req_prepare()
does some sanity checks on the request and returns a boolean flag to
indicate whether the request should be queued or not. In the latter case,
virtio_scsi_handle_cmd_req_prepare() has detected a non-fatal error and
sent a response back to the guest.
We have now a new condition to take into account: the device is broken
and should stop all processing.
The return value of virtio_scsi_handle_cmd_req_prepare() is hence changed
to an int. A return value of zero means that the request should be queued.
Other non-fatal error cases where the request shoudn't be queued return
a negative errno (values are vaguely inspired by the error condition, but
the only goal here is to discriminate the case we're interested in).
And finally, if virtio_scsi_bad_req() was called, -EINVAL is returned. In
this case, virtio_scsi_handle_cmd_vq() detaches and frees already queued
requests, instead of submitting them.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
If this happens, virtio_net_flush_tx() also returns -EINVAL, so that all
callers can stop processing the virtqueue immediatly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: QEMU should not exit.
With this patch, if virtio_blk_handle_request() detects a buggy request, it
marks the device as broken and returns an error to the caller so it takes
appropriate action.
In the case of virtio_blk_handle_vq(), we detach the request from the
virtqueue, free its allocated memory and stop popping new requests.
We don't need to bother about multireq since virtio_blk_handle_request()
errors out early and mrb.num_reqs == 0.
In the case of virtio_blk_dma_restart_bh(), we need to detach and free all
queued requests as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest may send a request without providing buffers for the reply
or for the request itself, and virtqueue_pop() will return an element with
either in_num == 0 or out_num == 0.
All 9P requests are expected to start with the following 7-byte header:
uint32_t size_le;
uint8_t id;
uint16_t tag_le;
If iov_to_buf() fails to return these 7 bytes, then something is wrong in
the guest.
In both cases, it is wrong to crash QEMU, since the root cause lies in the
guest.
This patch hence does the following:
- keep the check of in_num since pdu_complete() assumes it has enough
space to store the reply and we will send something broken to the guest
- let iov_to_buf() handle out_num == 0, since it will return 0 just like
if the guest had provided an zero-sized buffer.
- call virtio_error() to inform the guest that the device is now broken,
instead of aborting
- detach the request from the virtqueue and free it
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some functions that were called from the dataplane code are now only used
locally:
virtio_blk_init_request()
virtio_blk_handle_request()
virtio_blk_submit_multireq()
since commit "03de2f527499 virtio-blk: do not use vring in dataplane", and
virtio_blk_free_request()
since commit "6aa46d8ff1ee virtio: move VirtQueueElement at the beginning
of the structs".
This patch converts them to static.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.
There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away. For example, if the virtio
device is reset then virtqueue elements are no longer valid.
This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse. This ensures that the
VirtQueueElement is freed properly.
Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure to unmap the scatter-gather list and decrement vq->inuse
before freeing requests in virtio_blk_reset().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.
_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.
As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The shipping default setting for the Freescale M5208EVB board is to run
the CPU at 166.67MHz. The current qemu emulation code for this board is
defaulting to 66MHz. This results in time appearing to run way to slowly.
So a "sleep 5" in a standard ColdFire Linux build takes almost 15
seconds in real time to actually complete.
Change the hard coded default to match the default hardware setting.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While processing isochronous transfer descriptors(iTD), if the page
select(PG) field value is out of bands it will return. In this
situation the ehci's sg list is not freed thus leading to a memory
leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
