The local variable "type" in virtio_scsi_handle_ctl represents the tmf
command type from the guest and it has the same meaning as the
req->req.tmf.type. However, before the invoking of virtio_scsi_parse_req
the req->req.tmf.type doesn't has the correct value(just initialized to
zero). Therefore, we need to use the "type" variable to judge the case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Bin Wu <wu.wubin@huawei.com>
[Actually make it compile, "type" must be uint32_t in order to pass
it to virtio_tswap32s. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If req->resp.cmd.status is not GOOD, the address of sense for
qemu_iovec_from_buf should be modified from &req->resp to sense.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need this to protect dataplane thread from race conditions with block
jobs until the latter is made dataplane-safe.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
scsi_req_continue can complete the request and cause the VirtIOSCSIReq
to be freed. Fetch req->sreq just once to avoid the bug.
Reported-by: Richard Jones <rjones@redhat.com>
Tested-by: Richard Jones <rjones@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.
Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the "common part" to handle one cmd request. Refactor out for
later usage of dataplane iothread code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command direction according to the guest-passed buffers
is already stored in the VirtIOSCSIReq. We can use it instead
of computing it again from req->elem.
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VirtQueueElement is a very big structure (>48k!), since it will be
initialzed by virtqueue_pop, we can save the expensive zeroing here.
This saves a few microseconds per request in my test:
[fio-test] rw bs iodepth jobs bw iops latency
--------------------------------------------------------------------------------------------
Before read 4k 1 1 110 28269 34
After read 4k 1 1 131 33745 28
Whereas,
virtio-blk read 4k 1 1 217 55673 16
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No cmd vq surprises guest (Linux panics in virtscsi_probe), too many
queues abort qemu (in the following virtio_add_queue).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtio SCSI Events need to be byteswapped before being pushed
when host and guest have a different endianness. Not doing so
breaks hotplug of virtio scsi disks, with the following error
message being printed in the guest console:
virtio_scsi: Unsupport virtio scsi event 1000000
This issue got uncovered while testing disk hotplug with a PowerKVM
ppc64le guest. I have checked that this issue also affects a x86_64
guest run on a ppc64 host.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[ Ported from PowerKVM,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hotplug of a virtio scsi disk is currently broken: no disk appears in the
guest (verified with a fedora 20 host running a fedora 20 guest with KVM).
Bisect leeds to Paolo's patches to support any_layout, especially this
commit:
commit 36b15c79aa
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jun 10 16:21:18 2014 +0200
virtio-scsi: start preparing for any_layout
It modifies virtio_scsi_pop_req() so that it is up to the callers to parse
the virtio scsi request. It seems that virtio_scsi_push_event() was not
modified accordingly...
This patch adds a call to virtio_scsi_parse_req(). It also drops some
sanity checks that are already performed by virtio_scsi_parse_req().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost userspace needn't to handle vq's notification from guest,
so define dummy handle_output callback for all vqs of vhost-scsi.
In some corner cases(such as when handling vq's reset from VM), virtio-pci
still trys to handle pending virtio-scsi events, then object check failure
inside virtio_scsi_handle_event() for vhost-scsi can be triggered.
The issue can be reproduced by 'rmmod virtio-scsi', 'system sleep' or reboot
inside VM.
Cc: qemu-stable@nongnu.org
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the request and response headers by value, and let
virtio_scsi_parse_req check that there is only one of datain
and dataout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retrieve sense and copy it to guest memory, to prepare for when we will use
qemu_iovec_from_buf.
Swap response and request, since we'll use the tail of VirtIOSCSIReq
for the CDB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Introduce virtio_scsi_init_req and virtio_scsi_free_req
- rename qemu_sgl_init_external to qemu_sgl_concat
- move virtio_scsi_parse_req from virtio_scsi_pop_req to callers
and add header length checks to virtio_scsi_parse_req.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/bonzini/scsi-next:
megasas: remove buildtime strings
block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CVE-2013-4542
hw/scsi/scsi-bus.c invokes load_request.
virtio_scsi_load_request does:
qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
this probably can make elem invalid, for example,
make in_num or out_num huge, then:
virtio_scsi_parse_req(s, vs->cmd_vqs[n], req);
will do:
if (req->elem.out_num > 1) {
qemu_sgl_init_external(req, &req->elem.out_sg[1],
&req->elem.out_addr[1],
req->elem.out_num - 1);
} else {
qemu_sgl_init_external(req, &req->elem.in_sg[1],
&req->elem.in_addr[1],
req->elem.in_num - 1);
}
and this will access out of array bounds.
Note: this adds security checks within assert calls since
SCSIBusInfo's load_request cannot fail.
For now simply disable builds with NDEBUG - there seems
to be little value in supporting these.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In some cases, an unplug can cause events to be dropped, which
leads to an assertion failure when preparing to notify the guest
kernel.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is still a small window that occurs when a cancel I/O affects
an asynchronous I/O operation that hasn't started. In other words,
when the residual data length equals the expected data length.
Today, the routine virtio_scsi_command_complete fails because the
VirtIOSCSIReq pointer (from the hba_private field in SCSIRequest)
was cleared earlier when virtio_scsi_complete_req was called by
the virtio_scsi_request_cancelled routine. As a result, the
virtio_scsi_command_complete routine needs to simply return when
it is processing a SCSIRequest block that was marked canceled.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's the abstract base of virtio-scsi-device and vhost-scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be passed to qbus_create_inplace().
Use DEVICE() casts instead of direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.
Signed-off-by: Andreas Färber <afaerber@suse.de>
