Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility to give the offset of a host pointer within a RAMBlock
(assuming we already know it's in that RAMBlock)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The choice of call to discard a block is getting more complicated
for other cases. We use fallocate PUNCH_HOLE in any file cases;
it works for both hugepage and for tmpfs.
We use the DONTNEED for non-hugepage cases either where they're
anonymous or where they're private.
Care should be taken when trying other backing files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewers can use ACPI tables in this patch to run
test_acpi_{piix4,q35}_tcg_dimm_pxm cases.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU now builds one SRAT memory affinity structure for each PC-DIMM
and NVDIMM device presented at boot time with the proximity domain
specified in the device option 'node', rather than only one SRAT
memory affinity structure covering the entire hotpluggable address
space with the proximity domain of the last node.
Add test cases on PC and Q35 machines with 4 proximity domains, and
one PC-DIMM and one NVDIMM attached to the 2nd and 3rd proximity
domains respectively. Check whether the QEMU-built SRAT tables match
with the expected ones.
The following ACPI tables need to be added for this test:
tests/acpi-test-data/pc/APIC.dimmpxm
tests/acpi-test-data/pc/DSDT.dimmpxm
tests/acpi-test-data/pc/NFIT.dimmpxm
tests/acpi-test-data/pc/SRAT.dimmpxm
tests/acpi-test-data/pc/SSDT.dimmpxm
tests/acpi-test-data/q35/APIC.dimmpxm
tests/acpi-test-data/q35/DSDT.dimmpxm
tests/acpi-test-data/q35/NFIT.dimmpxm
tests/acpi-test-data/q35/SRAT.dimmpxm
tests/acpi-test-data/q35/SSDT.dimmpxm
New APIC and DSDT are needed because of the multiple processors
configuration. New NFIT and SSDT are needed because of NVDIMM.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity
domain of a NVDIMM SPA range must match with corresponding entry in
SRAT table.
The address ranges of vNVDIMM in QEMU are allocated from the
hot-pluggable address space, which is entirely covered by one SRAT
memory affinity structure. However, users can set the vNVDIMM
proximity domain in NFIT SPA range structure by the 'node' property of
'-device nvdimm' to a value different than the one in the above SRAT
memory affinity structure.
In order to solve such proximity domain mismatch, this patch builds
one SRAT memory affinity structure for each DIMM device present at
boot time, including both PC-DIMM and NVDIMM, with the proximity
domain specified in '-device pc-dimm' or '-device nvdimm'.
The remaining hot-pluggable address space is covered by one or multiple
SRAT memory affinity structures with the proximity domain of the last
node as before.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It may need to treat PC-DIMM and NVDIMM differently, e.g., when
deciding the necessity of non-volatile flag bit in SRAT memory
affinity structures.
A new field 'nvdimm' is added to the union type MemoryDeviceInfo for
such purpose. Its type is currently PCDIMMDeviceInfo and will be
updated when necessary in the future.
It also fixes "info memory-devices"/query-memory-devices which
currently show nvdimm devices as dimm devices since
object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to
TYPE_PC_DIMM which it's been inherited from.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make qmp_pc_dimm_device_list() return sorted by start address
list of devices so that it could be reused in places that
would need sorted list*. Reuse existing pc_dimm_built_list()
to get sorted list.
While at it hide recursive callbacks from callers, so that:
qmp_pc_dimm_device_list(qdev_get_machine(), &list);
could be replaced with simpler:
list = qmp_pc_dimm_device_list();
* follow up patch will use it in build_srat()
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All PCI devices are now QOM'ified.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Intel processor trace should be disabled when
CPUID.(EAX=14H,ECX=0H).ECX.[bit31] is set.
Generated packets which contain IP payloads will have LIP
values when this bit is set, or IP payloads will have RIP
values.
Currently, The information of CPUID 14H is constant to make
live migration safty and this bit is always 0 in guest even
if host support LIP values.
Guest sees the bit is 0 will expect IP payloads with RIP
values, but the host CPU will generate IP payloads with
LIP values if this bit is set in HW.
To make sure the value of IP payloads correctly, Intel PT
should be disabled when bit[31] is set.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1520969191-18162-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Ed-script diffs are awful compared to context diffs. Fix another
'diff -q' while in the area (if the files are different, being
noisy makes it easier to diagnose why).
While at it, diff .err before .out, because if a test fails, .err
is more likely to contain the most important information for
fixing the failure.
Fixes: 46ec4fce
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180315125116.804342-1-eblake@redhat.com>
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.
For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce latency histogram statics for block devices.
For each accounted operation type, the latency region [0, +inf) is
divided into subregions by several points. Then, calculate
hits for each subregion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Test the new OOB capability. Here we used the new "x-oob-test" command.
First, we send a lock=true and oob=false command to hang the main
thread. Then send another lock=false and oob=true command (which will
be run inside parser this time) to free that hanged command.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-24-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
OOB introduced DROP event for flow control. This should not affect old
QMP clients. Add a command batching check to make sure of it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-23-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This command is only used to test OOB functionality. It should not be
used for any other purposes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-22-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Start to use dedicate IO thread for QMP monitors that are not using
MUXed chardev.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-21-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For those monitors who have enabled IO thread, we'll offload the
responding procedure into IO thread. The main reason is that chardev is
not thread safe, and we need to do all the read/write IOs in the same
thread. For use_io_thr=true monitors, that thread is the IO thread.
We do this isolation in similar pattern as what we have done to the
request queue: we first create one response queue for each monitor, then
instead of replying directly in the main thread, we queue the responses
and kick the IO thread to do the rest of the job for us.
A funny thing after doing this is that, when the QMP clients send "quit"
to QEMU, it's possible that we close the IOThread even earlier than
replying to that "quit". So another thing we need to do before cleaning
up the monitors is that we need to flush the response queue (we don't
need to do that for command queue; after all we are quitting) to make
sure replies for handled commands are always flushed back to clients.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-20-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Having "allow-oob":true for a command does not mean that this command
will always be run in out-of-band mode. The out-of-band quick path will
only be executed if we specify the extra "run-oob" flag when sending the
QMP request:
{ "execute": "command-that-allows-oob",
"arguments": { ... },
"control": { "run-oob": true } }
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
Note that in the patch I exported qmp_dispatch_check_obj() to be used to
check the request earlier, and at the same time allowed "id" field to be
there since actually we always allow that.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-19-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to(), spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
Set maximum QMP command queue length to 8. If the queue is full,
instead of queuing the command, we directly return a "command-dropped"
event, telling the client that a specific command is dropped.
Note that this flow control mechanism is only valid if OOB is enabled.
If it's not, the effective queue length will always be 1, which strictly
follows original behavior of QMP command handling (which never drops
messages).
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-17-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar, abort on failure to send event]
Signed-off-by: Eric Blake <eblake@redhat.com>
This event will be emitted if one QMP command is dropped. Also,
declare an enum for the reasons.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-16-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Originally QMP goes through these steps:
JSON Parser --> QMP Dispatcher --> Respond
/|\ (2) (3) |
(1) | \|/ (4)
+--------- main thread --------+
This patch does this:
JSON Parser QMP Dispatcher --> Respond
/|\ | /|\ (4) |
| | (2) | (3) | (5)
(1) | +-----> | \|/
+--------- main thread <-------+
So the parsing job and the dispatching job is isolated now. It gives us
a chance in follow up patches to totally move the parser outside.
The isolation is done using one QEMUBH. Only one dispatcher QEMUBH is
used for all the monitors.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-15-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, rebase to qobject_to()]
Signed-off-by: Eric Blake <eblake@redhat.com>
This patches allows QMP monitors to be suspended/resumed.
One thing to mention is that for QMPs that are using IOThreads, we need
an explicit kick for the IOThread in case it is sleeping.
Meanwhile, we need to take special care on non-interactive HMPs.
Currently only gdbserver is using that. For these monitors, we still
don't allow suspend/resume operations.
Since at it, add traces for the operations.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-14-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Monitor code now can be run in more than one thread. Let it be thread
safe when accessing suspend_cnt counter.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-13-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A tiny refactoring, preparing to split the QMP dispatcher away.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-12-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() usage]
Signed-off-by: Eric Blake <eblake@redhat.com>
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
For each Monitor, add one field "use_io_thr" to show whether it will be
using the dedicated monitor IO thread to handle input/output. When set,
monitor IO parsing work will be offloaded to the dedicated monitor IO
thread, rather than the original main loop thread.
This only works for QMP. HMP will always be run on the main loop
thread.
Currently we're still keeping use_io_thr off always. Will turn it on
later at some point.
One thing to mention is that we cannot set use_io_thr for every QMP
monitor. The problem is that MUXed typed chardevs may not work well
with it now. When MUX is used, frontend of chardev can be the monitor
plus something else. The only thing we know would be safe to be run
outside main thread so far is the monitor frontend. All the rest of the
frontends should still be run in main thread only.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-10-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: squash in Peter's followup patch to avoid test failures]
Signed-off-by: Eric Blake <eblake@redhat.com>
It was QLIST. I want to use this list to do monitor priority job later,
which need tail insertion ability. So switching to a tail queue.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-9-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In monitor_qmp_read(), we have the hack to temporarily replace the
cur_mon pointer. Now we move this hack deeper inside the QMP dispatcher
routine since the Monitor pointer can be actually obtained using
container_of() upon the parser object, just like most of the other JSON
parser users do.
This does not make much sense as a single patch. However, this will be
a big step for the next patch, when the QMP dispatcher routine will be
split from the QMP parser.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-7-peterx@redhat.com>
[eblake: rebase context of qobject_to() macro]
Signed-off-by: Eric Blake <eblake@redhat.com>
It's part of the data init. Collect it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-6-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We can simplify object_property_get_str() using the new
qobject_get_try_str().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-5-peterx@redhat.com>
[eblake: rebase context of qobject_to() macro]
Signed-off-by: Eric Blake <eblake@redhat.com>
A quick way to fetch string from qobject when it's a QString.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-4-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() macro]
Signed-off-by: Eric Blake <eblake@redhat.com>
The only difference from qstring_get_str() is that it allows the qstring
to be NULL. If so, NULL is returned.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-3-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Update both the developer and spec for the new QMP OOB (Out-Of-Band)
command.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-2-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
TLS handshake may create background GSource tasks, while we won't know
the correct GMainContext until the whole chardev (including frontend)
inited. Let's postpone the initial TLS handshake until machine done.
For dynamically created tcp chardev, we don't postpone that by checking
the init_machine_done variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[peterx: add missing include line, do unit test]
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180308140714.28906-1-peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().
This enables explicitly null backing links for json:{} filenames.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch reworks some places which use either qobject_type() checks
plus qobject_to(), where the latter alone is sufficient, or NULL checks
plus qobject_type() checks where we can simply do a qobject_to() != NULL
check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter ordering]
Signed-off-by: Eric Blake <eblake@redhat.com>
They are no longer needed now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a dynamic casting macro that, given a QObject type, returns an
object as that type or NULL if the object is of a different type (or
NULL itself).
The macro uses lower-case letters because:
1. There does not seem to be a hard rule on whether qemu macros have to
be upper-cased,
2. The current situation in qapi/qmp is inconsistent (compare e.g.
QINCREF() vs. qdict_put()),
3. qobject_to() will evaluate its @obj parameter only once, thus it is
generally not important to the caller whether it is a macro or not,
4. I prefer it aesthetically.
The macro parameter order is chosen with typename first for
consistency with other QAPI macros like QAPI_CLONE(), as well as
for legibility (read it as "qobject to" type "applied to" obj).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180224154033.29559-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[eblake: swap parameter order to list type first, avoid clang ubsan
warning on QOBJECT(NULL) and container_of(NULL,type,base)]
Signed-off-by: Eric Blake <eblake@redhat.com>
The raspi3 has AArch64 CPUs, which means that our smpboot
code for keeping the secondary CPUs in a pen needs to have
a version for A64 as well as A32. Without this, the
secondary CPUs go into an infinite loop of taking undefined
instruction exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-10-peter.maydell@linaro.org
Now we have separate types for BCM2386 and BCM2387, we might as well
just hard-code the CPU type they use rather than having it passed
through as an object property. This then lets us put the initialization
of the CPU object in init rather than realize.
Note that this change means that it's no longer possible on
the command line to use -cpu to ask for a different kind of
CPU than the SoC supports. This was never a supported thing to
do anyway; we were just not sanity-checking the command line.
This does require us to only build the bcm2837 object on
TARGET_AARCH64 configs, since otherwise it won't instantiate
due to the missing cortex-a53 device and "make check" will fail.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-9-peter.maydell@linaro.org
