Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment. This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARMv7VE introduced the ERET instruction, which is necessary to
return from an exception taken to Hyp mode. Implement this.
In A32 encoding it is a completely new encoding; in T32 it
is an adjustment of the behaviour of the existing
"SUBS PC, LR, #<imm8>" instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-10-peter.maydell@linaro.org
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.
The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
The AArch32 HSR is the equivalent of AArch64 ESR_EL2;
we can implement it by marking our existing ESR_EL2 regdef
as STATE_BOTH. It also needs to be "RES0 from EL3 if
EL2 not implemented", so add the missing stanza to
el3_no_el2_cp_reginfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-8-peter.maydell@linaro.org
The AArch32 virtualization extensions support these fault address
registers:
* HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
* HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)
Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-7-peter.maydell@linaro.org
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-5-peter.maydell@linaro.org
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-3-peter.maydell@linaro.org
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-2-peter.maydell@linaro.org
If an instruction is conditional (like CBZ) and it is executed
conditionally (using the ITx instruction), a jump to an undefined
label is generated, and QEMU crashes.
CBZ in IT block is an UNPREDICTABLE behavior, but we should not
crash. Honouring the condition code is allowed by the spec in this
case (constrained unpredictable, ARMv8, section K1.1.7), and matches
what we do for other "UNPREDICTABLE inside an IT block" instructions.
Fix the 'skip on condition' code to create a new label only if it
does not already exist. Previously multiple labels were created, but
only the last one of them was set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180816120533.6587-1-rka@sysgo.com
[PMM: fixed ^ 1 being applied to wrong argument, fixed typo]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With PC, there are 33 registers. Three per line lines up nicely
without overflowing 80 columns.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.
Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Used the wrong temporary in the computation of subtractive overflow.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The normal vector element is sign-extended before
comparing with the wide vector element.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tailchaining is an optimization in handling of exception return
for M-profile cores: if we are about to pop the exception stack
for an exception return, but there is a pending exception which
is higher priority than the priority we are returning to, then
instead of unstacking and then immediately taking the exception
and stacking registers again, we can chain to the pending
exception without unstacking and stacking.
For v6M and v7M it is IMPDEF whether tailchaining happens for pending
exceptions; for v8M this is architecturally required. Implement it
in QEMU for all M-profile cores, since in practice v6M and v7M
hardware implementations generally do have it.
(We were already doing tailchaining for derived exceptions which
happened during exception return, like the validity checks and
stack access failures; these have always been required to be
tailchained for all versions of the architecture.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180720145647.8810-5-peter.maydell@linaro.org
On exception return for M-profile, we must restore the CONTROL.SPSEL
bit from the EXCRET value before we do any kind of tailchaining,
including for the derived exceptions on integrity check failures.
Otherwise we will give the guest an incorrect EXCRET.SPSEL value on
exception entry for the tailchained exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180720145647.8810-4-peter.maydell@linaro.org
In do_v7m_exception_exit(), we use the exc_secure variable to track
whether the exception we're returning from is secure or non-secure.
Unfortunately the statement initializing this was accidentally
inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional,
which meant that we were using the wrong value for NMI handlers.
Move the initialization out to the right place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180720145647.8810-3-peter.maydell@linaro.org
Improve the exception-taken logging by logging in
v7m_exception_taken() the exception we're going to take
and whether it is secure/nonsecure.
This requires us to move logging at many callsites from after the
call to before it, so that the logging appears in a sensible order.
(This will make tail-chaining produce more useful logs; for the
current callers of v7m_exception_taken() we know which exception
we're going to take, so custom log messages at the callsite sufficed;
for tail-chaining only v7m_exception_taken() knows the exception
number that we're going to tail-chain to.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180720145647.8810-2-peter.maydell@linaro.org
One of the required effects of setting HCR_EL2.TGE is that when
SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for
all purposes except direct reads. That is, it effectively disables
the MMU for the NS EL0/EL1 translation regime.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-6-peter.maydell@linaro.org
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.
To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.
(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-5-peter.maydell@linaro.org
Whene we raise a synchronous exception, if HCR_EL2.TGE is set then
exceptions targeting NS EL1 must be redirected to EL2. Implement
this in raise_exception() -- all synchronous exceptions go through
this function.
(Asynchronous exceptions go via arm_cpu_exec_interrupt(), which
already honours HCR_EL2.TGE when it determines the target EL
in arm_phys_excp_target_el().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-4-peter.maydell@linaro.org
Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA,
and TDA, which we implement in the functions access_tdra(),
access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE
are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1.
Implement this by having the access functions check MDCR_EL2.TDE
and HCR_EL2.TGE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-3-peter.maydell@linaro.org
If the "trap general exceptions" bit HCR_EL2.TGE is set, we
must mask all virtual interrupts (as per DDI0487C.a D1.14.3).
Implement this in arm_excp_unmasked().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-2-peter.maydell@linaro.org
Now that we have full support for small regions, including execution,
we can remove the workarounds where we marked all small regions as
non-executable for the M-profile MPU and SAU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180710160013.26559-7-peter.maydell@linaro.org
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MSR handling is the only place where CONTROL.nPRIV is modified.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-id: 20180705222622.17139-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving various M profile vmstate structs
a 'needed' function that always returns true.
We reuse m_needed() for this, since it's always true here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-4-peter.maydell@linaro.org
Since 86f0a186d6 the TYPE_ARM_HOST_CPU is only compiled when CONFIG_KVM
is enabled.
Remove the now redundant special-case introduced in a96c0514ab, to avoid:
$ qemu-system-aarch64 -machine virt -cpu \? | fgrep host
host
host (only available in KVM mode)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727132311.2777-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180716133302.25989-1-peter.maydell@linaro.org
'I' was being double-incremented; correctly within the inner loop
and incorrectly within the outer loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180711103957.3040-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180709124535.1116-1-peter.maydell@linaro.org
Use MAKE_64BIT_MASK instead of open-coding. Remove an odd
vector size check that is unlikely to be more profitable
than 3 64-bit integer stores. Correct the iteration for WORD
to avoid writing too much data.
Fixes RISU tests of PTRUE for VL 256.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180705191929.30773-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions must perform the sve_access_check, but
since they are implemented as NOPs there is no generated
code to elide when the access check fails.
Fixes: Coverity issues 1393780 & 1393779.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The rom_ptr() function allows direct access to the ROM blobs that we
load during startup. However, there are currently no checks for the
size of the accesses, so it's currently possible to crash QEMU for
example with:
$ echo "Insane in the mainframe" > /tmp/test.txt
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -append xyz
Segmentation fault (core dumped)
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -initrd /tmp/test.txt
Segmentation fault (core dumped)
$ echo -n HdrS > /tmp/hdr.txt
$ sparc64-softmmu/qemu-system-sparc64 -kernel /tmp/hdr.txt -initrd /tmp/hdr.txt
Segmentation fault (core dumped)
We need a possibility to check the size of the ROM area that we want
to access, thus let's add a size parameter to the rom_ptr() function
to avoid these problems.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1530005740-25254-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This register was added to aa32 state by ARMv8.2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to re-set these 3 features already
implied by the call to aarch64_a15_initfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to re-set these 9 features already
implied by the call to aarch64_a57_initfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
