b98fcfd884
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Markus Armbruster
|
121d07125b |
Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> |
||
|
Dmitry Fleytman
|
6f3fbe4ed0 |
net: Introduce e1000e device emulation
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e. This implementation is derived from the e1000 emulation code, and utilizes the TX/RX packet abstractions that were initially developed for the vmxnet3 device. Although some parts of the introduced code may be shared with e1000, the differences are substantial enough so that the only shared resources for the two devices are the definitions in hw/net/e1000_regs.h. Similarly to vmxnet3, the new device uses virtio headers for task offloads (for backends that support virtio extensions). Usage of virtio headers may be forcibly disabled via a boolean device property "vnet" (which is enabled by default). In such case task offloads will be performed in software, in the same way it is done on backends that do not support virtio headers. The device code is split into two parts: 1. hw/net/e1000e.c: QEMU-specific code for a network device; 2. hw/net/e1000e_core.[hc]: Device emulation according to the spec. The new device name is e1000e. Intel specifications for the 82574 controller are available at: http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf Throughput measurement results (iperf2): Fedora 22 guest, TCP, RX 4 ++------------------------------------------+ | | | X X X X X 3.5 ++ X X X X | | X | | | 3 ++ | G | X | b | | / 2.5 ++ | s | | | | 2 ++ | | | | | 1.5 X+ | | | + + + + + + + + + + + + 1 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, TCP, TX 18 ++-------------------------------------------+ | X | 16 ++ X X X X X | X | 14 ++ | | | 12 ++ | G | X | b 10 ++ | / | | s 8 ++ | | | 6 ++ X | | | 4 ++ | | X | 2 ++ X | X + + + + + + + + + + + 0 ++--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, UDP, RX 3 ++------------------------------------------+ | X | | 2.5 ++ | | | | | 2 ++ X | G | | b | | / 1.5 ++ | s | X | | | 1 ++ | | | | X | 0.5 ++ | | X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Fedora 22 guest, UDP, TX 1 ++------------------------------------------+ | X 0.9 ++ | | | 0.8 ++ | 0.7 ++ | | | G 0.6 ++ | b | | / 0.5 ++ | s | X | 0.4 ++ | | | 0.3 ++ | 0.2 ++ X | | | 0.1 ++ X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, TCP, RX 3.2 ++------------------------------------------+ | X | 3 ++ | | | 2.8 ++ | | | 2.6 ++ X | G | X X X X X b 2.4 ++ X X | / | | s 2.2 ++ | | | 2 ++ | | X X | 1.8 ++ | | | 1.6 X+ | + + + + + + + + + + + + 1.4 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, TCP, TX 14 ++-------------------------------------------+ | | | X X 12 ++ | | | 10 ++ | | | G | | b 8 ++ | / | X | s 6 ++ | | | | | 4 ++ X | | | 2 ++ | | X X X | + X X + + X X + + + + + 0 X+--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, UDP, RX 1.6 ++------------------------------------------X | | 1.4 ++ | | | 1.2 ++ | | X | | | G 1 ++ | b | | / 0.8 ++ | s | | 0.6 ++ X | | | 0.4 ++ | | X | | | 0.2 ++ X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, UDP, TX 0.6 ++------------------------------------------+ | X | | 0.5 ++ | | | | | 0.4 ++ | G | | b | | / 0.3 ++ X | s | | | | 0.2 ++ | | | | X | 0.1 ++ | | X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> |
||
|
Dmitry Fleytman
|
06e7fa0ad7 |
e1000_regs: Add definitions for Intel 82574-specific bits
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> |
||
|
Leonid Bloch
|
72ea771c97 |
e1000: Trivial implementation of various MAC registers
These registers appear in Intel's specs, but were not implemented.
These registers are now implemented trivially, i.e. they are initiated
with zero values, and if they are RW, they can be written or read by the
driver, or read only if they are R (essentially retaining their zero
values). For these registers no other procedures are performed.
For the trivially implemented Diagnostic registers, a debug warning is
produced on read/write attempts.
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in a later patch in this series).
The registers implemented here are:
Transmit:
RW: AIT
Management:
RW: WUC WUS IPAV IP6AT* IP4AT* FFLT* WUPM* FFMT* FFVT*
Diagnostic:
RW: RDFH RDFT RDFHS RDFTS RDFPC PBM* TDFH TDFT TDFHS
TDFTS TDFPC
Statistic:
RW: FCRUC
R: RNBC TSCTFC MGTPRC MGTPDC MGTPTC RFC RJC SCC ECOL
LATECOL MCC COLC DC TNCRS SEC CEXTERR RLEC XONRXC
XONTXC XOFFRXC XOFFTXC
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
||
|
Leonid Bloch
|
20f3e86362 |
e1000: Cosmetic and alignment fixes
This fixes some alignment and cosmetic issues. The changes are made in order that the following patches in this series will look like integral parts of the code surrounding them, while conforming to the coding style. Although some changes in unrelated areas are also made. Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com> |
||
|
Gabriel L. Somlo
|
6883b59140 |
e1000: improve auto-negotiation reporting via mii-tool
Using mii-tool (on F20-live), the following output is produced: SIOCGMIIREG on ens3 failed: Input/output error ens3: no autonegotiation, 1000baseT-FD flow-control, link ok The first line (SIOCGMIIREG error) is due to mii-tool's inability to read the PHY auto-negotiation expansion register. On the second line, "no autonegotiation" is wrong, and caused by the absence of a flag in the link partner ability register which would indicate that our link partner has acked us. This flag is listed as "reserved" in the Intel e1000 manual, but mii-tool uses it as LPA_LPACK from /usr/include/linux/mii.h. This patch adds read access to PHY_AUTONEG_EXP and defines the link partner ack flag, allowing mii-tool to generate output as normally expected: ens3: negotiated 1000baseT-FD flow-control, link ok Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Gabriel L. Somlo
|
8597f2e19e |
e1000: allow command-line selection of card model
Allow selection of different card models from the qemu command line, to better accomodate a wider range of guests. Signed-off-by: Romain Dolbeau <romain@dolbeau.org> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Paolo Bonzini
|
47b43a1f41 |
hw: move private headers to hw/ subdirectories.
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |