Memory hotplug can fail for some combinations of RAM and maxmem when
DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends
on maximum addressable memory returned by guest and this value is currently
being calculated wrongly by the guest kernel routine memory_hotplug_max().
While there is an attempt to fix the guest kernel, this patch works
around the problem within QEMU itself.
memory_hotplug_max() routine in the guest kernel arrives at max
addressable memory by multiplying lmb-size with the lmb-count obtained
from ibm,dynamic-memory property. There are two assumptions here:
- All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM
where only hot-pluggable LMBs are present in this property.
- The memory area comprising of RAM and hotplug region is contiguous: This
needn't be true always for PowerKVM as there can be gap between
boot time RAM and hotplug region.
To work around this guest kernel bug, ensure that ibm,dynamic-memory
has information about all the LMBs (RMA, boot-time LMBs, future
hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and
hotpluggable region).
RMA is represented separately by memory@0 node. Hence mark RMA LMBs
and also the LMBs for the gap b/n RAM and hotpluggable region as
reserved and as having no valid DRC so that these LMBs are not considered
by the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that guests can use the PowerISA 2.07 CPU sPAPR
compatibility mode when they request it and the target CPU
supports it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current pcr_mask values are ambiguous: Should these be the mask
that defines valid bits in the PCR register? Or should these rather
indicate which compatibility levels are possible? Anyway, POWER6 and
POWER7 should certainly not use the same values here. So let's
introduce an additional variable "pcr_supported" here which is
used to indicate the valid compatibility levels, and use pcr_mask
to signal the valid bits in the PCR register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The h_client_architecture_support() function has become quite big
and nested already. So factor out the code that takes care of the
sPAPR compatibility PVRs (which will be modified by the following
patches).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This wrapper for machine_usb(current_machine) is not necessary,
replace all usages of usb_enabled() with machine_usb().
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The coccinelle script:
scripts/coccinelle/overflow_muldiv64.cocci
gives us a list of potential overflows in muldiv64()
(the two first parameters are 64bit values).
This patch fixes one, as the fix seems obvious:
replace muldiv64(a, b, c) by muldiv64(b, a, c)
as "a" and "b" are 64bit values but a <= NANOSECONDS_PER_SECOND.
(10^9 -> 30bit value).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's become redundant since it was added in commit 09aa9a5 "spapr-pci:
enable adding PHB via -device".
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM now supports 512 memslots on PowerPC (earlier it was 32). Allow half
of it (256) to be used as hotpluggable memory slots.
Instead of hard coding the max value, use the KVM supplied value if KVM
is enabled. Otherwise resort to the default value of 32.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be later used by the "ibm,reset-pe-dma-window" RTAS handler
which resets the DMA configuration to the defaults.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LoPAPR dictates that during system reset all DMA windows must be removed
and the default DMA32 window must be created so does the patch.
At the moment there is just one window supported so no change in
behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to have multiple DMA windows at different offsets on
a PCI bus. For the sake of migration, we will have as many TCE table
objects pre-created as many windows supported.
So we need a way to map windows dynamically onto a PCI bus
when migration of a table is completed but at this stage a TCE table
object does not have access to a PHB to ask it to map a DMA window
backed by just migrated TCE table.
This adds a "root" memory region (UINT64_MAX long) to the TCE object.
This new region is mapped on a PCI bus with enabled overlapping as
there will be one root MR per TCE table, each of them mapped at 0.
The actual IOMMU memory region is a subregion of the root region and
a TCE table enables/disables this subregion and maps it at
the specific offset inside the root MR which is 1:1 mapping of
a PCI address space.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The source guest could have reallocated the default TCE table and
migrate bigger/smaller table. This adds reallocation in post_load()
if the default table size is different on source and destination.
This adds @bus_offset, @page_shift to the migration stream as
a subsection so when DDW is added, migration to older machines will
still be possible. As @bus_offset and @page_shift are not used yet,
this makes no change in behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently TCE tables are created once at start and their sizes never
change. We are going to change that by introducing a Dynamic DMA windows
support where DMA configuration may change during the guest execution.
This changes spapr_tce_new_table() to create an empty zero-size IOMMU
memory region (IOMMU MR). Only LIOBN is assigned by the time of creation.
It still will be called once at the owner object (VIO or PHB) creation.
This introduces an "enabled" state for TCE table objects, some
helper functions are added:
- spapr_tce_table_enable() receives TCE table parameters, stores in
sPAPRTCETable and allocates a guest view of the TCE table
(in the user space or KVM) and sets the correct size on the IOMMU MR;
- spapr_tce_table_disable() disposes the table and resets the IOMMU MR
size; it is made public as the following DDW code will be using it.
This changes the PHB reset handler to do the default DMA initialization
instead of spapr_phb_realize(). This does not make differenct now but
later with more than just one DMA window, we will have to remove them all
and create the default one on a system reset.
No visible change in behaviour is expected except the actual table
will be reallocated every reset. We might optimize this later.
The other way to implement this would be dynamically create/remove
the TCE table QOM objects but this would make migration impossible
as the migration code expects all QOM objects to exist at the receiver
so we have to have TCE table objects created when migration begins.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On ppc64 especially, we flush the tlb on any slbie or tlbie instruction.
However, those instructions often come in bursts of 3 or more (context
switch will favor a series of slbie's for example to an slbia if the
SLB has less than a certain number of entries in it, and tlbie's can
happen in a series, with PAPR, H_BULK_REMOVE can remove up to 4 entries
at a time.
Doing a tlb_flush() each time is a waste of time. We end up doing a memset
of the whole TLB, reloading it for the next instruction, memset'ing again,
etc...
Those instructions don't have to take effect immediately. For slbie, they
can wait for the next context synchronizing event. For tlbie, the next
tlbsync.
This implements batching by keeping a flag that indicates that we have a
TLB in need of flushing. We check it on interrupts, rfi's, isync's and
tlbsync and flush the TLB if needed.
This reduces the number of tlb_flush() on a boot to a ubuntu installer
first dialog screen from roughly 360K down to 36K.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: added a 'CPUPPCState *' variable in h_remove() and
h_bulk_remove() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: removed spurious whitespace change, use 0/1 not true/false
consistently, since tlb_need_flush has int type]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment presence of vfio-pci devices on a bus affect the way
the guest view table is allocated. If there is no vfio-pci on a PHB
and the host kernel supports KVM acceleration of H_PUT_TCE, a table
is allocated in KVM. However, if there is vfio-pci and we do yet not
KVM acceleration for these, the table has to be allocated by
the userspace. At the moment the table is allocated once at boot time
but next patches will reallocate it.
This moves kvmppc_create_spapr_tce/g_malloc0 and their counterparts
to helpers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The user could have picked LIOBN via the CLI but the device tree
rendering code would still use the value derived from the PHB index
(which is the default fallback if LIOBN is not set in the CLI).
This replaces SPAPR_PCI_LIOBN() with the actual DMA LIOBN value.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are possible racing situations involving hotplug events and
guest migration. For cases where a hotplug event is migrated, or
the guest is in the process of fetching device tree at the time of
migration, we need to ensure the device tree is created and
associated with the corresponding DRC for devices that were
hotplugged on the source, but 'coldplugged' on the target.
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds check for negative return value from get_image_size(),
where it is missing. It avoids unnecessary two function calls.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since a788f227 "memory: Allow replay of IOMMU mapping notifications"
when new VFIO listener is added, all existing IOMMU mappings are
replayed. However there is a problem that the base address of
an IOMMU memory region (IOMMU MR) is ignored which is not a problem
for the existing user (which is pseries) with its default 32bit DMA
window starting at 0 but it is if there is another DMA window.
This stores the IOMMU's offset_within_address_space and adjusts
the IOVA before calling vfio_dma_map/vfio_dma_unmap.
As the IOMMU notifier expects IOVA offset rather than the absolute
address, this also adjusts IOVA in sPAPR H_PUT_TCE handler before
calling notifier(s).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Memory barriers are needed also by Xen and, when the ioeventfd
bugs are fixed, by TCG as well.
sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to
the actual users.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reserve this to CPU state serialization.
Luckily, they were only used by sPAPR devices and these are ppc64
only. So there is no change to migration format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This changes a cpu.h dependency for hw/ppc/ppc.h into a cpu-qom.h
dependency. For it to compile we also need to clean up a few unused
definitions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that the QMP output visitor supports an explicit null
output, we should utilize it to make it easier to diagnose
the difference between a missing fdt ('null') vs. a
present-but-empty one ('{}').
(Note that this reverts the behavior of commit ab8bf1d, taking
us back to the behavior of commit 6c2f9a1 [which in turn
stemmed from a crash fix in 1d10b44]; but that this time,
the change is intentional and not an accidental side-effect.)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1461879932-9020-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
CPU/memory resources can be signalled en-masse via
spapr_hotplug_req_add_by_count(), and when doing so, actually change
the meaning of the 'drc' parameter passed to
spapr_hotplug_req_event() to be a count rather than an index.
f40eb92 added a hook in spapr_hotplug_req_event() to record when a
device had been 'signalled' to the guest, but that code assumes that
drc is always an index. In cases where it's a count, such as memory
hotplug, the DRC lookup will fail, leading to an assert.
Fix this by only explicitly setting the signalled state for cases where
we are doing PCI hotplug.
For other resources types, since we cannot selectively track whether a
resource has been signalled in cases where we signal attach as a count,
set the 'signalled' state to true immediately upon making the
resource available via drck->attach().
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: david@gibson.dropbear.id.au
Cc: qemu-ppc@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently crashes when using bad parameters for the
spapr-pci-host-bridge device:
$ qemu-system-ppc64 -device spapr-pci-host-bridge,buid=0x123,liobn=0x321,mem_win_addr=0x1,io_win_addr=0x10
Segmentation fault
The problem is that spapr_tce_find_by_liobn() might return NULL, but
the code in spapr_populate_pci_dt() does not check for this condition
and then tries to dereference this NULL pointer.
Apart from that, the return value of spapr_populate_pci_dt() also
has to be checked for all PCI buses, not only for the last one, to
make sure we catch all errors.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4ZAr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160408' into staging
ppc patch queue for 2016-04-08
Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.
# gpg: Signature made Fri 08 Apr 2016 06:02:45 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160408:
spapr: Fix ibm,lrdr-capacity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ibm,lrdr-capacity has a field to describe the maximum address in bytes
and therefore, the most memory that can be allocated to this guest. We
are using maxmem for this field, but instead should use the actual RAM
address corresponding to the end of hotplug region.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently spapr doesn't support "aborting" hotplug of PCI
devices by allowing device_del to immediately remove the
device if we haven't signalled the presence of the device
to the guest.
In the past this wasn't an issue, since we always immediately
signalled device attach and simply relied on full guest-aware
add->remove path for device removal. However, as of 788d259,
we now defer signalling for PCI functions until function 0
is attached, so now we need to deal with these "abort" operations
for cases where a user hotplugs a non-0 function, then opts to
remove it prior hotplugging function 0. Currently they'd have to
reboot before the unplug completed. PCIe multifunction hotplug
does not have this requirement however, so from a management
implementation perspective it would be good to address this within
the same release as 788d259.
We accomplish this by simply adding a 'signalled' flag to track
whether a device hotplug event has been sent to the guest. If it
hasn't, we allow immediate removal under the assumption that the
guest will not be using the device. Devices present at boot/reset
time are also assumed to be 'signalled'.
For CPU/memory/etc, signalling will still happen immediately
as part of device_add, so only PCI functions should be affected.
Cc: bharata@linux.vnet.ibm.com
Cc: david@gibson.dropbear.id.au
Cc: sbhat@linux.vnet.ibm.com
Cc: qemu-ppc@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: This fixes a regression where an incorrect hot-add of a non-zero
function can no longer be backed out until function 0 is added]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes the current AIL implementation for POWER8. The
interrupt vector address can be calculated directly from LPCR when the
exception is handled. The excp_prefix update becomes useless and we
can cleanup the H_SET_MODE hcall.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: Removed LPES0/1 handling for HV vs. !HV
Fixed LPCR_ILE case for POWERPC_EXCP_POWER8 ]
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[dwg: This was written as a cleanup, but it also fixes a real bug
where setting an alternative interrupt location would not be
correctly migrated]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
RX buffer pools are now enabled by default for new machine types.
For older machine types, they are still disabled to avoid breaking
migration.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
And move the code adjusting the MSR mask and calling kvmppc_set_papr()
to it. This allows us to add a few more things such as disabling setting
of MSR:HV and appropriate LPCR bits which will be used when fixing
the exception model.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: removed LPCR setting ]
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ePAPR defines "hcall-instructions" device-tree property which contains
code to call hypercalls in ePAPR paravirtualized guests. In general
pseries guests won't use this property, instead using the PAPR defined
hypercall interface.
However, this property has been re-used to implement a hack to allow
PR KVM to run (slightly modified) guests in some situations where it
otherwise wouldn't be able to (because the system's L0 hypervisor
doesn't forward the PAPR hypercalls to the PR KVM kernel).
Hence, this property is always present in the device tree for pseries
guests. All KVM guests use it at least to read features via the
KVM_HC_FEATURES hypercall.
The property is populated by the code returned from the KVM's
KVM_PPC_GET_PVINFO ioctl; if not implemented in the KVM, QEMU supplies
code which will fail all hypercall attempts. If QEMU does not create
the property, and the guest kernel is compiled with
CONFIG_EPAPR_PARAVIRT (which is normally the case), there is exactly
the same stub at @epapr_hypercall_start already.
Rather than maintaining this fairly useless stub implementation, it
makes more sense not to create the property in the device tree in the
first place if the host kernel does not implement it.
This changes kvmppc_get_hypercall() to return 1 if the host kernel
does not implement KVM_CAP_PPC_GET_PVINFO. The caller can use it to decide
on whether to create the property or not.
This changes the pseries machine to not create the property if KVM does
not implement KVM_PPC_GET_PVINFO. In practice this means that from now
on the property will not be created if either HV KVM or TCG is used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[reworded commit message for clarity --dwg]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change all machine_init() users that simply call type_register*()
to use type_init().
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is
only one implementation of the finish_realize hook in sPAPRPHBClass. So,
we can fold that implementation into its (single) caller, and remove the
hook. That's the last thing left in sPAPRPHBClass, so that can go away as
well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Now that the regular spapr-pci-host-bridge can handle EEH, there are only
two things that spapr-pci-vfio-host-bridge does differently:
1. automatically sizes its DMA window to match the host IOMMU
2. checks if the attached VFIO container is backed by the
VFIO_SPAPR_TCE_IOMMU type on the host
(1) is not particularly useful, since the default window used by the
regular host bridge will work with the host IOMMU configuration on all
current systems anyway.
Plus, automatically changing guest visible configuration (such as the DMA
window) based on host settings is generally a bad idea. It's not
definitively broken, since spapr-pci-vfio-host-bridge is only supposed to
support VFIO devices which can't be migrated anyway, but still.
(2) is not really useful, because if a guest tries to configure EEH on a
different host IOMMU, the first call will fail and that will be that.
It's possible there are scripts or tools out there which expect
spapr-pci-vfio-host-bridge, so we don't remove it entirely. This patch
reduces it to just a stub for backwards compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Now that the EEH code is independent of the special
spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI
host bridges instead. We do this by changing spapr_phb_eeh_available()
to be based on the vfio_eeh_as_ok() call instead of the host bridge class.
Because the value of vfio_eeh_as_ok() can change with devices being
hotplugged or unplugged, this can potentially lead to some strange edge
cases where the guest starts using EEH, then it starts failing because
of a change in status.
However, it's not really any worse than the current situation. Cases that
would have worked previously will still work (i.e. VFIO devices from at
most one VFIO IOMMU group per vPHB), it's just that it's no longer
necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState. So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper. For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.
On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
