The virtio code uses wmb() macros in several places, as required by the
SMP-aware virtio protocol. However the wmb() macro is locally defined
to be a compiler barrier only. This is probably sufficient on x86
due to its strong storage ordering model, but it certainly isn't on other
platforms, such as ppc.
In any case, qemu already has some globally defined memory barrier macros
in qemu-barrier.h. This patch, therefore converts virtio.c to use those
barrier macros. The macros in qemu-barrier.h are also wrong (or at least,
safe for x86 only) but this way at least there's only one place to fix
them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Need to check that guest slot/device number is not > 31 or walk off
the devfn table when checking if a devfn is available or not in a guest.
before this fix, passing in an addr=abc or addr=34,
can crash qemu, sometimes fail gracefully if data past end
of devfn table fails the availability test.
with this fix, get clean error:
Property 'pci-assign.addr' doesn't take value '34'
also tested when no addr= param passed for guest (pcicfg) address,
and that worked as well.
Signed-off-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do not try to map against the PCI bar in the ISA version of the device.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to initialize legacy_address_space during ISA VGA setup so that
the chain-4 alias can be registered properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is based on the original fix by Hervé Poussineau: pc_memory_init
actually takes a memory region for mapping BIOS and extension ROMs. That
equals the PCI memory region if PCI is available, but must be system
memory in the ISA case.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[Originally sent to qemu-kvm list, but I was redirected here]
The Capabilities Pointer is NULL, so this bit shouldn't be set. The state of
this bit doesn't appear to change any behavior on Linux/Windows versions we've
tested, but it does cause Windows' PCI/PCI Express Compliance Test to balk.
I happen to have a physical 82540EM controller, and it also sets the
Capabilities Bit, but it actually has items on the capabilities list to go
with it :)
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Writing to IRQSTATUS should affect irqst, not irqen -- error
spotted by Andrzej Zaborowski.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Promote the remark about why we handle FIFOTHRESHOLDSTATUS the
way we do from the commit message of de8af7fe0 to a comment in
the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Implement an I/O space index-data register pair as defined by the AHCI
spec, including the corresponding SATA PCI capability and BAR.
This allows real-mode code to access the AHCI registers; real-mode
code cannot address the memory-mapped register space because it is
beyond the first megabyte.
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a trivial wrapper for soc_dma_port_add_mem(), which makes
the memory API conversion more difficult because it takes a ram
addr_t. Drop.
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
When assigning a 32-bit value to cmd->xfer (which is 64-bits)
it can be erroneously sign extended because the intermediate
32-bit computation is signed. Fix this by standardizing on
the ld*_be_p functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
see, it clears port's Interrupt Enable register each time when reset of
any level happens. Is is reasonable for the global controller reset. It
is probably not good, but acceptable for FreeBSD driver for the port
hard reset. But it is IMO wrong for the device soft reset. None of real
hardware I know behaves that way.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It will not be needed for reads and writes if the HBA provides a sglist.
In addition, this lets scsi-disk refuse commands with an excessive
allocation length, as well as limit memory on usual well-behaved guests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also, consistently use qiov.size instead of iov.iov_len.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support bridge filtering on top of the memory
API as suggested by Avi Kivity:
Create a memory region for the bridge's address space. This region is
not directly added to system_memory or its descendants. Devices under
the bridge see this region as its pci_address_space(). The region is
as large as the entire address space - it does not take into account
any windows.
For each of the three windows (pref, non-pref, vga), create an alias
with the appropriate start and size. Map the alias into the bridge's
parent's pci_address_space(), as subregions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The switch to the new memory API caused the following problem:
The pci device may call pci_register_bar() to use PCI bus's address
space. But we don't init PCI bus's address space if it is not bus
0. A crash was reported:
http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg02243.html
More work will be needed to make bridge filtering work correctly
with the memory API.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
eepro100 was the last user. Now pci_add_capability is powerful enough.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I found no rationale for this in the logs, and it is quite bad because
it will make scsi-generic unsafe WRT power failures.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we use memory API in sun4u.c, after
71579cae30, setting up isa_mem_base
puts vga.chain4 outside of the physical address space.
Fix by removing obsolete isa_mem_base set up.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The virtio device lifecycle can be observed by looking at the sequence
of set status operations. This is especially important for catching the
reset operation (status value 0), which resets the device and all
virtqueues.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make qdev_device_help print both device and bus properties.
Helps libvirt to figure whenever bus properties such as
PCI.multifunction are supported present or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This does not yet unbreak PPC (which has its own problems) but
potentially other non-x86 systems where isa_mem_base is != 0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a number of bugs in the implementation of writes to the CM_CTRL
system register:
* write to cm_ctrl, not cm_init !
* an '&' vs '^' typo meant we would write the inverse of the bits
* handling the LED via printf() meant we spew lots of output
to stdout when Linux uses the LED as a heartbeat indicator
* we would hw_error() if a reset was requested rather than
actually resetting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In text mode, even a full refresh of the screen takes multiple updates.
As we reset the dump file pointer after the first call, we only wrote
the first line.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
