The spapr_vio_find_by_reg() function in hw/spapr_vio.c is supposed to find
the device structure for a PAPR virtual IO device with the given reg value,
and return NULL if none exists.
It does the first ok, but if no device with that reg exists, it just
returns the last device traversed in the list. This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The SLOF firmware used on the pseries machine needs a reasonable amount of
(guest) RAM in order to run, so we have a check in the machine init
function to check that this is available. However, SLOF runs in real mode
(MMU off) which means it can only actually access the RMA (Real Mode Area),
not all of RAM. In many cases the RMA is the same as all RAM, but when
running with Book3S HV KVM on PowerPC 970, the RMA must be especially
allocated to be (host) physically contiguous. In this case, the RMA size
is determined by what the host admin allocated at boot time, and will
usually be less than the whole guest RAM size.
This patch corrects the test to see if SLOF has enough memory for this
case.
In addition, more recent versions of SLOF that were committed earlier don't
need quite as much memory as earlier versions. Therefore, this patch also
reduces the amount of RAM we require to run SLOF.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
CD burning messes up the state of the host page cache and host block
device. Just pass all operations down to the device, even though that
might have slightly worse performance. Everything else just is not
reliable in combination with burning.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let scsi-block/scsi-generic report progress on long
operations.
Reported-by: Thomas Schmitt <scdbackup@gmxbackup.net>
Tested-by: Thomas Schmitt <scdbackup@gmxbackup.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- several MMC commands were parsed wrong by QEMU because their allocation
length/parameter list length is placed in a non-standard position in
the CDB (i.e. it is different from most commands with the same value in
bits 5-7).
- SEND VOLUME TAG length was multiplied by 40 which is not in SMC. The
parameter list length is between 32 and 40 bytes. Same for MEDIUM SCAN
(spec found at http://ldkelley.com/SCSI2/SCSI2-16.html but not in any of
the PDFs I have here).
- READ_POSITION (SSC) conflicts with PRE_FETCH (SBC). READ_POSITION's
transfer length is not hardcoded to 20 in SSC; for PRE_FETCH cmd->xfer
should be 0. Both fixed.
- FORMAT MEDIUM (the SSC name for FORMAT UNIT) was missing. The FORMAT
UNIT command is still somewhat broken for block devices because its
parameter list length is not in the CDB. However it works for CD/DVD
drives, which mandate the length of the payload.
- fixed wrong sign-extensions for 32-bit fields (for the LBA field,
this affects disks >1 TB).
- several other SBC or SSC commands were missing or parsed wrong.
- some commands were not in the list of "write" commands.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Thomas Schmitt <scdbackup@gmx.net> (MMC bits only)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add more commands and their names, and remove SEEK(6) which is obsolete.
Instead, use SET_CAPACITY which is still in SSC.
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mode page 2A of emulated ATAPI DVD-ROM should have page length 0x14
like SCSI CD-ROM, rather than 0x12.
Mode page length is off by 8, as it should contain the length of the
payload after the first two bytes.
MODE SENSE(6) should be thrown out of ATAPI DVD-ROM emulation. It is
not specified in the ATAPI list of MMC-2, and MMC-5 prescribes to use
MODE SENSE(10). Anyway, its implementation is wrong.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Old operating systems rely on correct geometry to convert from CHS
addresses to LBA. Providing correct data is necessary for them to boot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. I missed that when
making channel and LUN customizable. Avoid that it is included twice, and
convert the colons to commas for consistency with other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new section about using iSCSI LUNs with qemu
and provide a short example on how to set up a target and access it
using the built-in initiator
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.c files include .h files, so .o depends on .h,
and the linked result depends on .o.
We got it wrong for qga rules, fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qga/guest-agent-commands.c includes qga-qmp-commands.h,
but it was missing in its dependencies. Add it in QGALIB_GEN.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We have a single rule generating .c and .h files,
so .h doesn't depend on .c: both depend on the
source schema.
Fix Makefile to reflect that - without this,
if .c is there and .h is missing, Makefile does
not know how to remake .h and assumes it's
a dummy target, triggering endless rebuilds.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
make clean missed the source qmp files generated
by python. Fix that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We don't currently check for negative enum values in qmp_output_type_enum(),
this will very likely generate a segfault when triggered.
However, it _seems_ that no code in tree can trigger this today.
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
stat() can fail for a file name just read with readdir(). Easiest way
to trigger is a dangling symbolic link --- look ma, no race! When it
fails, file_completion() uses sb.st_mode uninitialized. If the
directory bit happens to be set, it appends a "/" to the completed
name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
One n too many for running, need we say more.
Signed-Off-By: Vagrant Cascadian <vagrant@freegeek.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
These errors were detected by codespell:
remaing -> remaining
soley -> solely
virutal -> virtual
seperate -> separate
libcacard.txt still needs some more patches.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This bug was detected by codespell.
In mips_mipssim.c a grammatical error was fixed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The default is still 3, and I didn't change older machine types.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a long-standing bug which meant that any attempt to do an
8 or 16 bit read from the OMAP GPIO module would cause qemu to
crash due to an infinite recursion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When running the s390x virtio machine we can potentially use uninitialized
memory for the virtio device backing ram. That can lead to weird breakge.
So let's better initialize it to 0 properly.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- use target_phys_addr_t
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Most targets did not name the enum; tci used TCGRegister.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have code in place to do refcounting of online CPUs, we
can drag the TCG code along and implement shutdown for that one too,
so it doesn't feel left out by its KVM counterpart.
Signed-off-by: Alexander Graf <agraf@suse.de>
On s390 a shutdown is the state of all CPUs being either stopped
or disabled (for interrupts) waiting. We have to track the overall
number of running CPUs to call the shutdown sequence accordingly.
This patch implements the counting and shutdown handling for the
kvm path in qemu.
Lets also wrap changes to env->halted and env->exception_index.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The default kernel command line for s390 is
"root=/dev/ram0 ro"
When overriding this line, we have to ensure to also copy the \0 to
avoid false lines, for example, -append "root=/dev/vda" will result in
"root=/dev/vda0 ro" with the current code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
An s390x OS does reboot and shutdown triggers through hypercalls that
we didn't implement on the TCG backend yet. That means that so far we
couldn't shut down virtual machines for example, having them hang on
shutdown when not using KVM.
With this patch, this restriction is gone. We can now shut down and
reboot s390x virtual machines even when using the TCG backend.
Signed-off-by: Alexander Graf <agraf@suse.de>
The rrbe instruction resets the reference bit in the given storage key.
So far, we merely made it a nop and also returned an invalid CC value,
so that the kernel never knew if a page actually got accessed.
This patch implements it properly, flushing the R bit and returning the
correct CC value.
Signed-off-by: Alexander Graf <agraf@suse.de>
When the s390x maps a page or writes happen to a page, the R and C
bits get updated. The easiest way to implement this in qemu is to
simply update them whenever we map a TLB translation and act according
to the permissions.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running 31-bit code we can potentially map the same virtual
address twice - once as 0x0yyyyyyy and once as 0x8yyyyyyy, because
the upper bit gets ignored.
This also should be reflected in the tlb invalidation path, so we
really invalidate also the transparently created tlb entries.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
also gracefully fail on nand_device_init() for unsupported block
size instead of aborting.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Depending on the considered baseboard the bit used to
reset the platform is different.
Here is the list of considered Realview/Versatile platforms:
Realview/Versatile AB for ARM926EJ-S: BOARD_ID = 0x100 = BOARD_ID_PB9
http://infocenter.arm.com/help/topic/com.arm.doc.dui0225d/CACCIFGI.html
RealView Emulation Baseboard: BOARD_ID = 0x140 = BOARD_ID_EB
No reset register
RealView PB for Cortex-A8: BOARD_ID = 0x178 = BOARD_ID_PBA8
http://infocenter.arm.com/help/topic/com.arm.doc.dui0417d/BBACIGAD.html
RealView PB for Cortex-A9: BOARD_ID = 0x182 = BOARD_ID_PBX
http://infocenter.arm.com/help/topic/com.arm.doc.dui0440b/CACCHBFB.html
Motherboard Express =C2=B5ATX: BOARD_ID = 0x190 = BOARD_ID_VEXPRESS
No reset register
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix an error in commit afd4a6522 which meant that writing a zero
to the RW bits in the PMCR wouldn't actually clear them. (Error
spotted by Andrzej Zaborowski.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
"!X == 2" is always false (spotted by Coverity), so the checks
for whether rndis is in the correct state would never fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
'info mtree' accesses invalid memory in two cases, both due to incorrect
(and unsafe) usage of QTAILQ_FOREACH_SAFE().
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
With -icount, The vm_clock is updated with help from TCG (it counts
instructions at 2^ICOUNT ns/instructions). With KVM, the instruction
count is not available so KVM cannot provide this help.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are only three counter/timers on the integrator board:
correct the bounds check to avoid an array overrun. (Spotted
by Coverity, see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a bug in handling the write-one-to-clear bits in the PMCR
which meant that we would always clear the bit even if the
value written was a zero. Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove a pointless comparison of an array to null. (There is
no need to check whether s->out[i] is non-null as qemu_set_irq
will do that for us.) Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove a check for g_malloc failing: this never happens.
Also use g_malloc rather than g_malloc0 as we immediately
memset the entire region and so zero-initialising it is pointless.
Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a malloc() in copy_elf_strings() failed we would call memset()
before the "did malloc fail?" check. Fix this by moving to the
glib alloc/free routines for this memory so we can use g_try_malloc0
rather than having a separate memset(). Spotted by Coverity (see
bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
