Coverity points out (CID 1421926) that the read code for
REG_ADDR_HIGH reads off the end of the buffer, because it does a
32-bit read from byte 4 of a 6-byte buffer.
The code also has an endianness issue for both REG_ADDR_HIGH and
REG_ADDR_LOW, because it will do the wrong thing on a big-endian
host.
Rewrite the read code to use ldl_le_p() and lduw_le_p() to fix this;
the write code is not incorrect, but for consistency we make it use
stl_le_p() and stw_le_p().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tulip network driver while copying tx/rx buffers does not check
frame size against r/w data length. This may lead to OOB buffer
access. Add check to avoid it.
Limit iterations over descriptors to avoid potential infinite
loop issue in tulip_xmit_list_update.
Reported-by: Li Qiang <pangpei.lq@antfin.com>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Reported-by: Jason Wang <jasowang@redhat.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "expired_scan_cycle" determines period of scanning expired
primary node net packets.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "compare_timeout" determines the maximum time to hold the primary net packet.
This patch expose the "compare_timeout", make user have ability to
adjest the value according to application scenarios.
QMP command demo:
{ "execute": "qom-get",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout" } }
{ "execute": "qom-set",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout",
"value": 5000} }
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The CanBusClientInfo::can_receive handler return whether the
device can or can not receive new frames. Make it obvious by
returning a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will modify this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The smc91c111_can_receive() function simply returns a boolean value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The e1000e_can_receive() function simply returns a boolean value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1737400
Fixed setting max_queue_num if there are no peers in
NICConf. qemu_new_nic() creates NICState with 1 NetClientState(index
0) without peers, set max_queue_num to 0 - It prevents undefined
behavior and possible crashes, especially during pcie hotplug.
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The i82596_receive() function attempts to pass the guest a buffer
which is effectively the concatenation of the data it is passed and a
4 byte CRC value. However, rather than implementing this as "write
the data; then write the CRC" it instead bumps the length value of
the data by 4, and writes 4 extra bytes from beyond the end of the
buffer, which it then overwrites with the CRC. It also assumed that
we could always fit all four bytes of the CRC into the final receive
buffer, which might not be true if the CRC needs to be split over two
receive buffers.
Calculate separately how many bytes we need to transfer into the
guest's receive buffer from the source buffer, and how many we need
to transfer from the CRC work.
We add a count 'bufsz' of the number of bytes left in the source
buffer, which we use purely to assert() that we don't overrun.
Spotted by Coverity (CID 1419396) for the specific case when we end
up using a local array as the source buffer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The command is 32-bit, but we are loading the 16 upper bits with
the 'get_uint16(s->scb + 2)' call.
Once shifted by 16, the command bits match the status bits:
- Command
Bit 31 ACK-CX Acknowledges that the CU completed an Action Command.
Bit 30 ACK-FR Acknowledges that the RU received a frame.
Bit 29 ACK-CNA Acknowledges that the Command Unit became not active.
Bit 28 ACK-RNR Acknowledges that the Receive Unit became not ready.
- Status
Bit 15 CX The CU finished executing a command with its I(interrupt) bit set.
Bit 14 FR The RU finished receiving a frame.
Bit 13 CNA The Command Unit left the Active state.
Bit 12 RNR The Receive Unit left the Ready state.
Add the SCB_COMMAND_ACK_MASK definition to simplify the code.
This fixes Coverity 1419392 (CONSTANT_EXPRESSION_RESULT):
/hw/net/i82596.c: 352 in examine_scb()
346 cuc = (command >> 8) & 0x7;
347 ruc = (command >> 4) & 0x7;
348 DBG(printf("MAIN COMMAND %04x cuc %02x ruc %02x\n", command, cuc, ruc));
349 /* and clear the scb command word */
350 set_uint16(s->scb + 2, 0);
351
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (2147483648UL /* 1UL << 31 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
352 if (command & BIT(31)) /* ACK-CX */
353 s->scb_status &= ~SCB_STATUS_CX;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (1073741824UL /* 1UL << 30 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
354 if (command & BIT(30)) /*ACK-FR */
355 s->scb_status &= ~SCB_STATUS_FR;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (536870912UL /* 1UL << 29 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
356 if (command & BIT(29)) /*ACK-CNA */
357 s->scb_status &= ~SCB_STATUS_CNA;
>>> CID 1419392: (CONSTANT_EXPRESSION_RESULT)
>>> "command & (268435456UL /* 1UL << 28 */)" is always 0 regardless of the values of its operands. This occurs as the logical operand of "if".
358 if (command & BIT(28)) /*ACK-RNR */
359 s->scb_status &= ~SCB_STATUS_RNR;
Fixes: Covertiy CID 1419392 (commit 376b851909)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This script started using Python2, where the 'classic' division
operator returns the floor result. In commit 3d004a371 we started
to use Python3, where the division operator returns the float
result ('true division').
To keep the same behavior, use the 'floor division' operator "//"
which returns the floor result.
Fixes: 3d004a371
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200330121345.14665-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were only constructing the 64-bit element, and not
replicating the 64-bit element across the rest of the vector.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The arm_current_el() should be invoked after mode switching. Otherwise, we
get a wrong current EL value, since current EL is also determined by
current mode.
Fixes: 4a2696c0d4 ("target/arm: Set PAN bit as required on exception entry")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200328140232.17278-1-changbin.du@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some places in xlnx_zynqmp_realize() we were putting an
error into our local Error*, but forgetting to check for
failure and pass it back to the caller. Add the missing code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200324134947.15384-3-peter.maydell@linaro.org
In xlnx_zynqmp_realize() if the attempt to realize the SD
controller object fails then the error-return path will leak
the 'bus_name' string. Fix this by deferring the allocation
until after the realize has succeeded.
Fixes: Coverity CID 1421911
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200324134947.15384-2-peter.maydell@linaro.org
Raise ConfigError rather than VersionRequirementError when we detect
that the Python being used by Sphinx is too old.
Currently the way we flag the Python version problem up to the user
causes Sphinx to print an unnecessary Python stack trace as well as
the information about the problem; in most versions of Sphinx this is
unavoidable.
The upstream Sphinx developers kindly added a feature to allow
conf.py to report errors to the user without the backtrace:
be608ca231
but the exception type they chose for this was ConfigError.
Switch to ConfigError, which won't make any difference with currently
deployed Sphinx versions, but will be prettier one day when the user
is using a Sphinx version with the new feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200313163616.30674-1-peter.maydell@linaro.org
The allwinner_h3_dramc_map_rows function simulates row addressing behavior
when bootloader software attempts to detect the amount of available SDRAM.
Currently the line that calculates the 64-bit address of the mirrored row
uses a signed 32-bit multiply operation that in theory could result in the
upper 32-bit be all 1s. This commit ensures that the row mirror address
is calculated using only 64-bit operations.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200323192944.5967-1-nieklinnenbank@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Orange Pi PC initialization function needs to verify that the SD card
block backend is usable before calling the Boot ROM setup routine. When
calling blk_is_available() the input parameter should not be NULL.
This commit ensures that blk_is_available is only called with non-NULL input.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200322205439.15231-1-nieklinnenbank@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for host and target futex_time64. If futex_time64 exists on
the host we try that first before falling back to the standard futex
syscall.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d9390e368a9a1fd32d52aa771815e6e3d40cb1d4.1584571250.git.alistair.francis@wdc.com>
[lv: define sys_futex() if __NR_futex is defined (fix bug on 32bit host),
remove duplicate get_errno()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Loongson multimedia condition instructions were previously implemented as
write 0 to rd due to lack of documentation. So I just confirmed with Loongson
about their encoding and implemented them correctly.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200324122212.11156-1-jiaxun.yang@flygoat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recent toolchains support static and pie at the same time.
As with normal dynamic builds, allow --static to default to PIE
if supported by the toolchain. Allow --enable/--disable-pie to
override the default.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix --disable-pie --static
v3: Update for QEMU_LDFLAGS.
Some distributions, e.g. Ubuntu 19.10, enable PIE by default.
If for some reason one wishes to build a non-pie binary, we
must provide additional options to override.
At the same time, reorg the code to an elif chain.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Update for QEMU_LDFLAGS.
There is nothing about these options that is related to PIE.
Use them unconditionally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fangrui Song <i@maskray.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Do not split into two tests.
v3: Update to QEMU_LDFLAGS.
The CFLAGS_NOPIE and LDFLAGS_NOPIE variables are used
in pc-bios/optionrom/Makefile, which has nothing to do
with the PIE setting of the main qemu executables.
This overrides any operating system default to build
all executables as PIE, which is important for ROMs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PIE is supported on many other hosts besides x86.
The default for non-x86 is now the same as x86: pie is used
if supported, and may be forced via --enable/--disable-pie.
The original commit (40d6444e91) said:
"Non-x86 are not changed, as they require TCG changes"
but I think that's wrong -- there's nothing about PIE that
affects TCG one way or another.
Tested on aarch64 (bionic) and ppc64le (centos 7) hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The commentary talks about "in concert with the addresses
assigned in the relevant linker script", except there is no
linker script for softmmu, nor has there been for some time.
(Do not confuse the user-only linker script editing that was
removed in the previous patch, because user-only does not
use this code_gen_buffer allocation method.)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
This prevents the memory from qemu_allocate_irqs() from being leaked which
can in some cases be spotted by Coverity (CID 1421984).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20200324210519.2974-4-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
This prevents the memory from qemu_allocate_irqs() from being leaked which
can in some cases be spotted by Coverity (CID 1421984).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20200324210519.2974-3-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
The PCI level calculation was accidentally left in when rebasing from a
previous patchset. Since both IRQs are driven separately, the value
being passed into the IRQ handler should be used directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20200324210519.2974-2-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
Coverity points out (CID 1421984) that we are leaking the
memory returned by qemu_allocate_irqs(). We can avoid this
leak by switching to using qdev_init_gpio_in(); the base
class finalize will free the irqs that this allocates under
the hood.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200323151715.29454-1-peter.maydell@linaro.org
[Maintainer edit: replace `DEVICE(dev)` by `ds` --js]
Signed-off-by: John Snow <jsnow@redhat.com>
While working on the Tulip driver i tried to write some Teledisk images to
a floppy image which didn't work. Turned out that Teledisk checks the written
data by issuing a READ command to the FDC but running the DMA controller
in VERIFY mode. As we ignored the DMA request in that case, the DMA transfer
never finished, and Teledisk reported an error.
The i8257 spec says about verify transfers:
3) DMA verify, which does not actually involve the transfer of data. When an
8257 channel is in the DMA verify mode, it will respond the same as described
for transfer operations, except that no memory or I/O read/write control signals
will be generated.
Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a more
clear boundary between DMA and FDC, so this patch also does that.
Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
These fields were already removed in commit c3c10f72, but then commit
b58deb34 revived them probably due to bad merge conflict resolution.
They are still unused, so remove them again.
Fixes: b58deb344d
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326170757.12344-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, a MirrorOp is already in s->ops_in_flight when
mirror_co_read() waits for free slots, so if not enough slots are
immediately available, an operation can end up waiting for itself, or
two or more operations can wait for each other to complete, which
results in a hang.
Fix this by adding a flag to MirrorOp that tells us if the request is
already in flight (and therefore occupies slots that it will later
free), and picking only such operations for waiting.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit 7e6c4ff792.
The fix was incomplete as it only protected against requests waiting for
themselves, but not against requests waiting for each other. We need a
different solution.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The given argument for this trace should be cqid, not sqid.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Message-Id: <20200324140646.8274-1-minwoo.im.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_root_attach_child promises to drop child_bs reference on failure.
It does it on first handled failure path, but not on the second. Fix
that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324155921.23822-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clang static code analyzer show warning:
block/iscsi.c:1920:9: warning: Value stored to 'flags' is never read
flags &= ~BDRV_O_RDWR;
^ ~~~~~~~~~~~~
In iscsi_allocmap_init() only checks BDRV_O_NOCACHE, which
is the same in both of flags and bs->open_flags.
We can use the flags instead bs->open_flags to prevent Clang warning.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200311032927.35092-1-kuhn.chenqun@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a job to build QEMU on s390x with TCG disabled, so
this configuration won't bitrot over time.
This job is quick, running check-unit: Ran for 5 min 30 sec
https://travis-ci.org/github/philmd/qemu/jobs/665456423
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322154015.25358-1-philmd@redhat.com>
Message-Id: <20200323161514.23952-12-alex.bennee@linaro.org>
Install optional dependencies of QEMU to get better coverage.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-5-philmd@redhat.com>
Message-Id: <20200323161514.23952-11-alex.bennee@linaro.org>
The Python2 PyYAML is now pointless, switch to the Python3 version.
Fixes: bcbf27947 (docker: move tests from python2 to python3)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-4-philmd@redhat.com>
Message-Id: <20200323161514.23952-10-alex.bennee@linaro.org>
