For symmetric algorithms, the length of ciphertext must be as same
as the plaintext.
The missing verification of the src_len and the dst_len in
virtio_crypto_sym_op_helper() may lead buffer overflow/divulged.
This patch is originally written by Yiming Tao for QEMU-SECURITY,
resend it(a few changes of error message) in qemu-devel.
Fixes: CVE-2023-3180
Fixes: 04b9b37edda("virtio-crypto: add data queue processing handler")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: Yiming Tao <taoym@zju.edu.cn>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230803024314.29962-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost-user reconnect to the backend, the notifer should be
cleanup. Otherwise, the fd resource will be exhausted.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20230731121018.2856310-2-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
virtio_queue_packed_set_last_avail_idx() is used by vhost devices to set
the internal queue indices to what has been reported by the vhost
back-end through GET_VRING_BASE. For packed virtqueues, this
32-bit value is expected to contain both the device's internal avail and
used indices, as well as their respective wrap counters.
To get the used index, we shift the 32-bit value right by 16, and then
apply a mask of 0x7ffff. That seems to be a typo, because it should be
0x7fff; first of all, the virtio specification says that the maximum
queue size for packed virt queues is 2^15, so the indices cannot exceed
2^15 - 1 anyway, making 0x7fff the correct mask. Second, the mask
clearly is wrong from context, too, given that (A) `idx & 0x70000` must
be 0 at this point (`idx` is 32 bit and was shifted to the right by 16
already), (B) `idx & 0x8000` is the used_wrap_counter, so should not be
part of the used index, and (C) `vq->used_idx` is a `uint16_t`, so
cannot fit the 0x70000 part of the mask anyway.
This most likely never produced any guest-visible bugs, though, because
for a vhost device, qemu will probably not evaluate the used index
outside of virtio_queue_packed_get_last_avail_idx(), where we
reconstruct the 32-bit value from avail and used indices and their wrap
counters again. There, it does not matter whether the highest bit of
the used_idx is the used index wrap counter, because we put the wrap
counter exactly in that position anyway.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230721134945.26967-1-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230721072820.75797-1-david.edmondson@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_disconnect
...
qemu_chr_write_buffer
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_set_status
...
qemu_cleanup
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e1 ("hw/virtio: Add boilerplate for vhost-user-scmi device")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
At several locations we compute the granule from the config
page_size_mask using ctz() and then format it in traces using
BIT(). As the page_size_mask is 64b we should use ctz64 and
BIT_ULL() for formatting. We failed to be consistent.
Note the page_size_mask is garanteed to be non null. The spec
mandates the device to set at least one bit, so ctz64 cannot
return 64. This is garanteed by the fact the device
initializes the page_size_mask to qemu_target_page_mask()
and then the page_size_mask is further constrained by
virtio_iommu_set_page_size_mask() callback which can't
result in a new mask being null. So if Coverity complains
round those ctz64/BIT_ULL with CID 1517772 this is a false
positive
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device assignment")
Message-Id: <20230718182136.40096-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
In the virtio_iommu_handle_command() when a PROBE request is handled,
output_size takes a value greater than the tail size and on a subsequent
iteration we can get a stack out-of-band access. Initialize the
output_size on each iteration.
The issue was found with ASAN. Credits to:
Yiming Tao(Zhejiang University)
Gaoning Pan(Zhejiang University)
Fixes: 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230717162126.11693-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's support device unplug by forwarding the unplug_request_check()
callback to the virtio-mem device.
Further, disallow changing the requested-size once an unplug request is
pending.
Disallowing requested-size changes handles corner cases such as
(1) pausing the VM (2) requesting device unplug and (3) adjusting the
requested size. If the VM would plug memory (due to the requested size
change) before processing the unplug request, we would be in trouble.
Message-ID: <20230711153445.514112-8-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
In many cases, blindly unplugging a virtio-mem device is problematic. We
can only safely remove a device once:
* The guest is not expecting to be able to read unplugged memory
(unplugged-inaccessible == on)
* The virtio-mem device does not have memory plugged (size == 0)
* The virtio-mem device does not have outstanding requests to the VM to
plug memory (requested-size == 0)
So let's add a callback to the virtio-mem device class to check for that.
We'll wire-up virtio-mem-pci next.
Message-ID: <20230711153445.514112-7-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's support unplug requests for virtio-md-pci devices that provide
a unplug_request_check() callback.
We'll wire that up for virtio-mem-pci next.
Message-ID: <20230711153445.514112-6-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
While we fence unplug requests from the outside, the VM can still
trigger unplug of virtio based memory devices, for example, in Linux
doing on a virtio-mem-pci device:
# echo 0 > /sys/bus/pci/slots/3/power
While doing that is not really expected to work without harming the
guest OS (e.g., removing a virtio-mem device while it still provides
memory), let's make sure that we properly handle it on the QEMU side.
We'll add support for unplugging of virtio-mem devices in some
configurations next.
Message-ID: <20230711153445.514112-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's factor out (un)plug handling, to be reused from arm/virt code.
Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because
neither virtio-mem nor virtio-pmem is enabled. While this cannot
currently happen for x86, it will be possible for arm/virt.
Message-ID: <20230711153445.514112-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add a new abstract "virtio memory device" type, and use it as
parent class of virtio-mem-pci and virtio-pmem-pci.
Message-ID: <20230711153445.514112-2-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
To achieve desired "x-ignore-shared" functionality, we should not
discard all RAM when realizing the device and not mess with
preallocation/postcopy when loading device state. In essence, we should
not touch RAM content.
As "x-ignore-shared" gets set after realizing the device, we cannot
rely on that. Let's simply skip discarding of RAM on incoming migration.
Note that virtio_mem_post_load() will call
virtio_mem_restore_unplugged() -- unless "x-ignore-shared" is set. So
once migration finished we'll have a consistent state.
The initial system reset will also not discard any RAM, because
virtio_mem_unplug_all() will not call virtio_mem_unplug_all() when no
memory is plugged (which is the case before loading the device state).
Note that something like VM templating -- see commit b17fbbe55c
("migration: allow private destination ram with x-ignore-shared") -- is
currently incompatible with virtio-mem and ram_block_discard_range() will
warn in case a private file mapping is supplied by virtio-mem.
For VM templating with virtio-mem, it makes more sense to either
(a) Create the template without the virtio-mem device and hotplug a
virtio-mem device to the new VM instances using proper own memory
backend.
(b) Use a virtio-mem device that doesn't provide any memory in the
template (requested-size=0) and use private anonymous memory.
Message-ID: <20230706075612.67404-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Already when starting QEMU we perform one system reset that ends up
triggering virtio_mem_unplug_all() with no actual memory plugged yet.
That, in turn will trigger ram_block_discard_range() and perform some
other actions that are not required in that case.
Let's optimize virtio_mem_unplug_all() for the case that no memory is
plugged. This will be beneficial for x-ignore-shared support as well.
Message-ID: <20230706075612.67404-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
QEMU uses vhost_svq_translate_addr() to translate addresses
between the QEMU's virtual address and the SVQ IOVA. In order
to validate this translation, QEMU checks whether the translated
range falls within the mapped range.
Yet the problem is that, the value of `needle_last`, which is calculated
by `needle.translated_addr + iovec[i].iov_len`, should represent the
exclusive boundary of the translated range, rather than the last
inclusive addresses of the range. Consequently, QEMU fails the check
when the translated range matches the size of the mapped range.
This patch solves this problem by fixing the `needle_last` value to
the last inclusive address of the translated range.
Note that this bug cannot be triggered at the moment, because QEMU
is unable to translate such a big range due to the truncation of
the CVQ command in vhost_vdpa_net_handle_ctrl_avail().
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ee31c5420ffc8e6a29705ddd30badb814ddbae1d.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current error messages in virtio_iommu_set_page_size_mask()
sound quite similar for different situations and miss the IOMMU
memory region that causes the issue.
Clarify them and rework the comment.
Also remove the trace when the new page_size_mask is not applied as
the current frozen granule is kept. This message is rather confusing
for the end user and anyway the current granule would have been used
by the driver.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20230705165118.28194-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
When running on a 64kB page size host and protecting a VFIO device
with the virtio-iommu, qemu crashes with this kind of message:
qemu-kvm: virtio-iommu page mask 0xfffffffffffff000 is incompatible
with mask 0x20010000
qemu: hardware error: vfio: DMA mapping failed, unable to continue
This is due to the fact the IOMMU MR corresponding to the VFIO device
is enabled very late on domain attach, after the machine init.
The device reports a minimal 64kB page size but it is too late to be
applied. virtio_iommu_set_page_size_mask() fails and this causes
vfio_listener_region_add() to end up with hw_error();
To work around this issue, we transiently enable the IOMMU MR on
machine init to collect the page size requirements and then restore
the bypass state.
Fixes: 90519b9053 ("virtio-iommu: Add bypass mode support to assigned device")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230705165118.28194-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
With TPM CRM device, vhost-vdpa reports an error when it tries
to register a listener for a non aligned memory region:
qemu-system-x86_64: vhost_vdpa_listener_region_add received unaligned region
qemu-system-x86_64: vhost_vdpa_listener_region_del received unaligned region
This error can be confusing for the user whereas we only need to skip
the region (as it's already done after the error_report())
Rather than introducing a special case for TPM CRB memory section
to not display the message in this case, simply replace the
error_report() by a trace function (with more information, like the
memory region name).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230704071931.575888-2-lvivier@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device reset is issued per device, not per VQ. The legacy device reset
message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore,
this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device
messages.
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like
virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a
concept of one-time messages which is misleading. One-time messages are sent
once per operation on the device, not once for the lifetime of the device.
Therefore, as discussed in [1], vhost_user_one_time_request should be
renamed to vhost_user_per_device_request and the relevant comments updated
to match the real functionality.
[1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus.
It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates
of similar devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-3-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-scmi device which connects to
the remote daemon. It is based on code of similar vhost-user devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-2-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest can disable or never enable Device-TLB. In these cases,
it can't be used even if enabled in QEMU. So, check Device-TLB state
before registering IOMMU notifier and select unmap flag depending on
that. Also, implement a way to change IOMMU notifier flag if Device-TLB
state is changed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001312
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626091258.24453-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always 0 and it is not useful to route call through file
descriptor.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153736.472443-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add MEMORY_LISTENER_PRIORITY_DEV_BACKEND for the symbolic value
for memory listener to replace the hard-coded value 10 for the
device backend.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <8314d91688030d7004e96958f12e2c83fb889245.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true)
fails, we call vhost_dev_disable_notifiers() that executes
virtio_bus_set_host_notifier(false) on all queues, even on queues that
have failed to be initialized.
This triggers a core dump in memory_region_del_eventfd():
virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24)
vhost VQ 1 notifier binding failed: 24
.../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed.
Fix the problem by providing to vhost_dev_disable_notifiers() the
number of queues to disable.
Fixes: 8771589b6f ("vhost: simplify vhost_dev_enable_notifiers")
Cc: longpeng2@huawei.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230602162735.3670785-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's separate plug and unplug handling to prepare for future changes
and make the code a bit easier to read -- working on block states
(plugged/unplugged) instead of on a bitmap.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230523183036.517957-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_start function does not release virtqueue objects when
event_notifier_init() function fails. Release virtqueue objects
and log a message about function failure.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-3-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
vhost_dev_start function does not release memory_listener object
in case of an error. This may crash the guest when vhost is unable
to set memory table:
stack trace of thread 125653:
Program terminated with signal SIGSEGV, Segmentation fault
#0 memory_listener_register (qemu-kvm + 0x6cda0f)
#1 vhost_dev_start (qemu-kvm + 0x699301)
#2 vhost_net_start (qemu-kvm + 0x45b03f)
#3 virtio_net_set_status (qemu-kvm + 0x665672)
#4 qmp_set_link (qemu-kvm + 0x548fd5)
#5 net_vhost_user_event (qemu-kvm + 0x552c45)
#6 tcp_chr_connect (qemu-kvm + 0x88d473)
#7 tcp_chr_new_client (qemu-kvm + 0x88cf83)
#8 tcp_chr_accept (qemu-kvm + 0x88b429)
#9 qio_net_listener_channel_func (qemu-kvm + 0x7ac07c)
#10 g_main_context_dispatch (libglib-2.0.so.0 + 0x54e2f)
Release memory_listener objects in the error path.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-2-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In order to have virtio-iommu.c become target-agnostic,
we need to avoid using TARGET_PAGE_MASK. Get it with the
qemu_target_page_mask() helper.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230524093744.88442-9-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of having "virtio/virtio-bus.h" implicitly included,
explicitly include it, to avoid when rearranging headers:
hw/virtio/vhost-vsock-common.c: In function ‘vhost_vsock_common_start’:
hw/virtio/vhost-vsock-common.c:51:5: error: unknown type name ‘VirtioBusClass’; did you mean ‘VirtioDeviceClass’?
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~
| VirtioDeviceClass
hw/virtio/vhost-vsock-common.c:51:25: error: implicit declaration of function ‘VIRTIO_BUS_GET_CLASS’; did you mean ‘VIRTIO_DEVICE_CLASS’? [-Werror=implicit-function-declaration]
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~~~~~~~
| VIRTIO_DEVICE_CLASS
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Avoid accessing RAMBlock internals, use the provided
qemu_ram_get_fd() getter to get the file descriptor.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-7-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK
and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON,
selected by both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add asymmetric crypto support in vhost_user backend.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Message-Id: <20230516083139.2349744-1-gmuthukrishn@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Host notifiers can now use is_external=false since virtio-blk and
virtio-scsi no longer rely on is_external=true for drained sections.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-20-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_detach_host_notifier() does two things:
1. It removes the fd handler from the event loop.
2. It processes the virtqueue one last time.
The first step can be peformed by any thread and without taking the
AioContext lock.
The second step may need the AioContext lock (depending on the device
implementation) and runs in the thread where request processing takes
place. virtio-blk and virtio-scsi therefore call
virtio_queue_aio_detach_host_notifier() from a BH that is scheduled in
AioContext.
The next patch will introduce a .drained_begin() function that needs to
call virtio_queue_aio_detach_host_notifier(). .drained_begin() functions
cannot call aio_poll() to wait synchronously for the BH. It is possible
for a .drained_poll() callback to asynchronously wait for the BH, but
that is more complex than necessary here.
Move the virtqueue processing out to the callers of
virtio_queue_aio_detach_host_notifier() so that the function can be
called from any thread. This is in preparation for the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-17-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add virtio-multitouch-pci, a Multitouch-capable input device, to the
list of devices that can be provided by virtio-input-pci.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-5-slp@redhat.com>
The VirtioInfoList is already allocated by QAPI_LIST_PREPEND and
need not be allocated by the caller.
Fixes Coverity CID 1508724.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option for hostmem-file to start the memory object at an offset
into the target file. This is useful if multiple memory objects reside
inside the same target file, such as a device node.
In particular, it's useful to map guest memory directly into /dev/mem
for experimentation.
To make this work consistently, also fix up all places in QEMU that
expect fd offsets to be 0.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230403221421.60877-1-graf@amazon.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS. Guest may
enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI
device. So, raise/lower a flag and call a trigger function to pass this
event to a device implementation.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Message-Id: <20230512135122.70403-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
