PMBus devices may integrate fans whose operation is configurable
over PMBus. This commit allows the driver to read and write the
fan control registers but does not model the operation of fans.
Reviewed-by: Stephen Longfield <slongfield@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-3-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PMBus devices can send and receive variable length data using the
block read and write format, with the first byte in the payload
denoting the length.
This is mostly used for strings and on-device logs. Devices can
respond to a block read with an empty string.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-1-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
If there is a pending DMA operation during ide_bus_reset(), the fact
that the IDEState is already reset before the operation is canceled
can be problematic. In particular, ide_dma_cb() might be called and
then use the reset IDEState which contains the signature after the
reset. When used to construct the IO operation this leads to
ide_get_sector() returning 0 and nsector being 1. This is particularly
bad, because a write command will thus destroy the first sector which
often contains a partition table or similar.
Traces showing the unsolicited write happening with IDEState
0x5595af6949d0 being used after reset:
> ahci_port_write ahci(0x5595af6923f0)[0]: port write [reg:PxSCTL] @ 0x2c: 0x00000300
> ahci_reset_port ahci(0x5595af6923f0)[0]: reset port
> ide_reset IDEstate 0x5595af6949d0
> ide_reset IDEstate 0x5595af694da8
> ide_bus_reset_aio aio_cancel
> dma_aio_cancel dbs=0x7f64600089a0
> dma_blk_cb dbs=0x7f64600089a0 ret=0
> dma_complete dbs=0x7f64600089a0 ret=0 cb=0x5595acd40b30
> ahci_populate_sglist ahci(0x5595af6923f0)[0]
> ahci_dma_prepare_buf ahci(0x5595af6923f0)[0]: prepare buf limit=512 prepared=512
> ide_dma_cb IDEState 0x5595af6949d0; sector_num=0 n=1 cmd=DMA WRITE
> dma_blk_io dbs=0x7f6420802010 bs=0x5595ae2c6c30 offset=0 to_dev=1
> dma_blk_cb dbs=0x7f6420802010 ret=0
> (gdb) p *qiov
> $11 = {iov = 0x7f647c76d840, niov = 1, {{nalloc = 1, local_iov = {iov_base = 0x0,
> iov_len = 512}}, {__pad = "\001\000\000\000\000\000\000\000\000\000\000",
> size = 512}}}
> (gdb) bt
> #0 blk_aio_pwritev (blk=0x5595ae2c6c30, offset=0, qiov=0x7f6420802070, flags=0,
> cb=0x5595ace6f0b0 <dma_blk_cb>, opaque=0x7f6420802010)
> at ../block/block-backend.c:1682
> #1 0x00005595ace6f185 in dma_blk_cb (opaque=0x7f6420802010, ret=<optimized out>)
> at ../softmmu/dma-helpers.c:179
> #2 0x00005595ace6f778 in dma_blk_io (ctx=0x5595ae0609f0,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> io_func=io_func@entry=0x5595ace6ee30 <dma_blk_write_io_func>,
> io_func_opaque=io_func_opaque@entry=0x5595ae2c6c30,
> cb=0x5595acd40b30 <ide_dma_cb>, opaque=0x5595af6949d0,
> dir=DMA_DIRECTION_TO_DEVICE) at ../softmmu/dma-helpers.c:244
> #3 0x00005595ace6f90a in dma_blk_write (blk=0x5595ae2c6c30,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> cb=cb@entry=0x5595acd40b30 <ide_dma_cb>, opaque=opaque@entry=0x5595af6949d0)
> at ../softmmu/dma-helpers.c:280
> #4 0x00005595acd40e18 in ide_dma_cb (opaque=0x5595af6949d0, ret=<optimized out>)
> at ../hw/ide/core.c:953
> #5 0x00005595ace6f319 in dma_complete (ret=0, dbs=0x7f64600089a0)
> at ../softmmu/dma-helpers.c:107
> #6 dma_blk_cb (opaque=0x7f64600089a0, ret=0) at ../softmmu/dma-helpers.c:127
> #7 0x00005595ad12227d in blk_aio_complete (acb=0x7f6460005b10)
> at ../block/block-backend.c:1527
> #8 blk_aio_complete (acb=0x7f6460005b10) at ../block/block-backend.c:1524
> #9 blk_aio_write_entry (opaque=0x7f6460005b10) at ../block/block-backend.c:1594
> #10 0x00005595ad258cfb in coroutine_trampoline (i0=<optimized out>,
> i1=<optimized out>) at ../util/coroutine-ucontext.c:177
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: simon.rowe@nutanix.com
Message-ID: <20230906130922.142845-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In commit 40f8214fcd ("hw/audio/pcspk: Inline pcspk_init()")
we neglected to give a change to the caller to handle failed
device creation cleanly. Respect the caller API contract and
propagate the error if creating the PC_SPEAKER device ever
failed. This avoid yet another bad API use to be taken as
example and copy / pasted all over the code base.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231020171509.87839-5-philmd@linaro.org>
Fix:
hw/core/loader.c:1073:27: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
bool option_rom, MemoryRegion *mr,
^
include/sysemu/sysemu.h:57:22: note: previous declaration is here
extern QEMUOptionRom option_rom[MAX_OPTION_ROMS];
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231010115048.11856-3-philmd@linaro.org>
Let CPUClass::class_by_name() handlers to return abstract classes,
and filter them once in the public cpu_class_by_name() method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230908112235.75914-3-philmd@linaro.org>
"hw/s390x/sclp.h" is a header used by target-agnostic objects
(such hw/char/sclpconsole[-lm].c), thus can not use target-specific
types, such CPUS390XState.
Have sclp_service_call[_protected]() take a S390CPU pointer, which
is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-3-philmd@linaro.org>
"hw/s390x/css.h" is a header used by target-agnostic objects
(such hw/s390x/virtio-ccw-gpu.c), thus can not use target-specific
types, such CPUS390XState.
Have css_do_sic() take S390CPU a pointer, which is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-2-philmd@linaro.org>
Inline and guard the single call to kvm_openpic_connect_vcpu()
allows to remove kvm-stub.c.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003070427.69621-3-philmd@linaro.org>
Factor the TCG specific code from cpu_common_reset_hold() to
tcg_cpu_reset_hold() within tcg-accel-ops.c. Since this file
is sysemu specific, we can inline tcg_flush_softmmu_tlb(),
removing its declaration in "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-4-philmd@linaro.org>
Introduce cpu_exec_reset_hold() which call an accelerator
specific AccelOpsClass::cpu_reset_hold() handler.
Define a stub on TCG user emulation, because CPU reset is
irrelevant there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-3-philmd@linaro.org>
"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
g3oVZA==
=dxC7
-----END PGP SIGNATURE-----
Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging
target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
-----BEGIN PGP SIGNATURE-----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=2A+W
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.2
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVJoOEACgkQr3yVEwxT
# gBPwcw/5AXgSVu521IHpobofq4Skc2rpO9P0Hep3IniBuS+5+h2XM3fwWNBaeeGj
# LZgdXDrCfcCnPuFh2I5j1D885xJDncDF4LET9EFtxK+BTT8eC5JpaCnORdV3Zd2T
# C7qdq1r4J/wKBel3cAz1jlLXc2Pssle4NFaMZGmOGlNX/mLJUYkI6BwKG9wNiCI+
# cCRQW5bEv9g8XzPYPsIKhX9aTegDKdV5x4Xj3YyVs8qkZTVM7Ona8GTpy6eShNfL
# h/RW+yvSxLwfKC9YJHesjI1oqhLsAuA7hFu5AVHiedFNAD5FevMZsZwrqjrmeBOG
# 5awBw9XgfXFFl7jQ0VQVRknt/PFANzTmGGbjLUkaXgJ6iTmH7oIMzwbkx2pM/0Qd
# HV2EboUPe5rJl0SNhcDMCJkYJYpt4z6TVXFpN5p10WU4K1AJXZf9P3YkChcxWiSK
# B4DlY4ax3W77voySwbKCvJRIRWCFQZmtl7doFY5dEQz2ERcNfI7VIB1GKIj7BlGm
# AVTCc5G9KghsaB8q0BzYbDplzCggdaaUBRgpIgLS/n22GKJlOisFwMCawWquPkEw
# i0t3ftt+Ket4Qnnq+dO4W3ehR4qW1/XatCWgQ3NCSgUeS4/9VK3h/nz5t+L7iKwp
# mjp86gNN11wcJRsBIIV7nOAmSAs9ybCm2F4J6YAyh3n1IlRVN0Q=
# =2A+W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 10:28:49 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu: (49 commits)
docs/about/deprecated: Document RISC-V "pmu-num" deprecation
target/riscv: Add "pmu-mask" property to replace "pmu-num"
target/riscv: Use existing PMU counter mask in FDT generation
target/riscv: Don't assume PMU counters are continuous
target/riscv: Propagate error from PMU setup
target/riscv: cpu: Set the OpenTitan priv to 1.12.0
hw/ssi: ibex_spi_host: Clear the interrupt even if disabled
disas/riscv: Replace TABs with space
disas/riscv: Add support for vector crypto extensions
disas/riscv: Add rv_codec_vror_vi for vror.vi
disas/riscv: Add rv_fmt_vd_vs2_uimm format
target/riscv: Move vector crypto extensions to riscv_cpu_extensions
target/riscv: Expose Zvks[c|g] extnesion properties
target/riscv: Add cfg properties for Zvks[c|g] extensions
target/riscv: Expose Zvkn[c|g] extnesion properties
target/riscv: Add cfg properties for Zvkn[c|g] extensions
target/riscv: Expose Zvkb extension property
target/riscv: Replace Zvbb checking by Zvkb
target/riscv: Add cfg property for Zvkb extension
target/riscv: Expose Zvkt extension property
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prevent that users try to boot a 64-bit only C3700 machine with a 32-bit
CPU, and to boot a 32-bit only B160L machine with a 64-bit CPU.
Signed-off-by: Helge Deller <deller@gmx.de>
The CPU HPA is in the high F-region on PA2.0 CPUs, so use F_EXTEND()
to trigger interrupt request at the right CPU HPA address.
Note that the cpu_hpa value comes out of the IRT, which doesn't store the
higher addresss bits.
Signed-off-by: Helge Deller <deller@gmx.de>
Hack the machine to use pa2.0 physical layout when required,
using the PSW.W=0 absolute to physical mapping.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The size of target_ureg is going to change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=/Du0
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231106' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVI+bIACgkQUaNDx8/7
# 7KHW4g/9FmgX0k2Elm1BAul3slJtuBT8/iHKfK19rhXICxhxS5xBWJA8FmosTWAT
# 91YqQJhOHARxLd9VROfv8Fq8sAo+Ys8bP3PTXh5satjY5gR9YtmMSVqvsAVLn7lv
# a/0xp7wPJt2UeKzvRNUqFXNr7yHPwxFxbJbmmAJbNte8p+TfE2qvojbJnu7BjJbg
# sTtS/vFWNJwtuNYTkMRoiZaUKEoEZ8LnslOqKUjgeO59g4i3Dq8e2JCmHANPFWUK
# cWmr7AqcXgXEnLSDWTtfN53bjcSCYkFVb4WV4Wv1/7hUF5jQ4UR0l3B64xWe0M3/
# Prak3bWOM/o7JwLBsgaWPngXA9V0WFBTXVF4x5qTwhuR1sSV8MxUvTKxI+qqiEzA
# FjU89oSZ+zXId/hEUuTL6vn1Th8/6mwD0L9ORchNOQUKzCjBzI4MVPB09nM3AdPC
# LGThlufsZktdoU2KjMHpc+gMIXQYsxkgvm07K5iZTZ5eJ4tV5KB0aPvTZppGUxe1
# YY9og9F3hxjDHQtEuSY2rzBQI7nrUpd1ZI5ut/3ZgDWkqD6aGRtMme4n4GsGsYb2
# Ht9+d2RL9S8uPUh+7rV8K/N3+vXgXRaEYTuAScKtflEbA7YnZA5nUdMng8x0kMTQ
# Y73XCd4UGWDfSSZsgaIHGkM/MRIHgmlrfcwPkWqWW9vF+92O6Hw=
# =/Du0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:35:30 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231106' of https://github.com/legoater/qemu: (22 commits)
vfio/common: Move vfio_host_win_add/del into spapr.c
vfio/spapr: Make vfio_spapr_create/remove_window static
vfio/container: Move spapr specific init/deinit into spapr.c
vfio/container: Move vfio_container_add/del_section_window into spapr.c
vfio/container: Move IBM EEH related functions into spapr_pci_vfio.c
util/uuid: Define UUID_STR_LEN from UUID_NONE string
util/uuid: Remove UUID_FMT_LEN
vfio/pci: Fix buffer overrun when writing the VF token
util/uuid: Add UUID_STR_LEN definition
hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
test: Add some tests for range and resv-mem helpers
virtio-iommu: Consolidate host reserved regions and property set ones
virtio-iommu: Implement set_iova_ranges() callback
virtio-iommu: Record whether a probe request has been issued
range: Introduce range_inverse_array()
virtio-iommu: Introduce per IOMMUDevice reserved regions
util/reserved-region: Add new ReservedRegion helpers
range: Make range_compare() public
virtio-iommu: Rename reserved_regions into prop_resv_regions
vfio: Collect container iova range info
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
-----BEGIN PGP SIGNATURE-----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=RAb0
-----END PGP SIGNATURE-----
Merge tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory protocol driver.
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmVI81IACgkQUrHW6VHQ
# zgdzTgv+I5eV2R01YLOBBJhBjzxZ4/BUqkuUHNxHpfjuCqEIzPb7FIfoZ4ZyXZFT
# YJdSE4lPeTZLrmmi/Nt6G0rUKDvdCeIgkS2VLHFSsTV8IzcT71BTRGzV0zAjUF5v
# yDH6uzo6e9gmaziIalRjibUxSDjCQmoCifms2rS2DwazADudUp+naGfm+3uyA0gM
# raOfBfRkNZsDqhXg2ayuqPIES75xQONoON9xYPKDAthS48POEbqtWBKuFopr3kXY
# y0eph+NAw+RajCyLYKM3poIgaSu3l4WegInuKQffzqKR8dxrbwPdCmtgo6NSHx0W
# uDfl7FUBnGzrR18VU4ZfTSrF5SVscGwF9EL7uocJen15inJjl1q3G53uZgyGzHLC
# cw8fKMjucmE8njQR2qiMyX0b+T4+9nKO1rykBgTG/+c9prRUVoxYpFCF117Ei0U8
# QzLGACW1oK+LV41bekWAye7w9pShUtFaxffhPbJeZDDGh7q0x61R3Z3yKkA07p46
# /YWWFWUD
# =RAb0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:08:18 HKT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu:
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
hw/i386/pc: Support hv-balloon
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
qapi: Add query-memory-devices support to hv-balloon
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
Add Hyper-V Dynamic Memory Protocol definitions
memory-device: Drop size alignment check
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
memory-device: Support empty memory devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Selected bugfixes for mainline and stable, especially to the per-vCPU
local APIC vector delivery mode for event channel notifications, which
was broken in a number of ways.
The xen-block driver has been defaulting to the wrong protocol for x86
guest, and this fixes that — which is technically an incompatible change
but I'm fairly sure nobody relies on the broken behaviour (and in
production I *have* seen guests which rely on the correct behaviour,
which now matches the blkback driver in the Linux kernel).
A handful of other simple fixes for issues which came to light as new
features (qv) were being developed.
-----BEGIN PGP SIGNATURE-----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=dQ7h
-----END PGP SIGNATURE-----
Merge tag 'pull-xenfv-stable-20231106' of git://git.infradead.org/users/dwmw2/qemu into staging
Bugfixes for emulated Xen support
Selected bugfixes for mainline and stable, especially to the per-vCPU
local APIC vector delivery mode for event channel notifications, which
was broken in a number of ways.
The xen-block driver has been defaulting to the wrong protocol for x86
guest, and this fixes that — which is technically an incompatible change
but I'm fairly sure nobody relies on the broken behaviour (and in
production I *have* seen guests which rely on the correct behaviour,
which now matches the blkback driver in the Linux kernel).
A handful of other simple fixes for issues which came to light as new
features (qv) were being developed.
# -----BEGIN PGP SIGNATURE-----
#
# iQJIBAABCAAyFiEEvgfZ/VSAmrLEsP9fY3Ys2mfi81kFAmVIvv4UHGR3bXcyQGlu
# ZnJhZGVhZC5vcmcACgkQY3Ys2mfi81nFmRAAvK3VNuGDV56TJqFdtEWD+3jzSZU0
# CoL1mxggvwnlFn1SdHvbC5jl+UscknErcNbqlxMTTg9jQiiQqzFuaWujJnL0dEOY
# RJiS2scKln/1gv9NRbLE31FjPwoNz+zJI/iMvdutjT7Ll//v34jY0vd1Y5Wo53ay
# MBschuuxD1sUUTHNj5f9afrgZaetJfgBSNZraiLR5T2HEadJVJuhItdGxW1+KaPI
# zBIcflIeZmJl9b/L1a2bP3KJmRo8QzHB56X3uzwkPhYhYSU2dnCaJTLCkiNfK+Qh
# SgCBMlzsvJbIZqDA9YPOGdKK1ArfTJRmRDwAkqH0YQknQGoIkpN+7eQiiSv6PMS5
# U/93V7r6MfaftIs6YdWSnFozWeBuyKZL9H2nAXqZgL5t6uEMVR8Un/kFnGfslTFY
# 9gQ1o4IM6ECLiXhIP/sPNOprrbFb0HU7QPtEDJOxrJzBM+IfLbldRHn4p9CccqQA
# LHvJF98VhX1d0nA0iZBT3qqfKPbmUhRV9Jrm+WamqNrRXhiGdF8EidsUf8RWX+JD
# xZWJiqhTwShxdLE6TC/JgFz4cQCVHG8QiZstZUbdq59gtz9YO5PGByMgI3ds7iNQ
# lGXAPFm+1wU85W4dZOH7qyim6d9ytFm2Fm110BKM8l9B6UKEuKHpsxXMqdo65JXI
# 7uBKbVpdPKul0DY=
# =dQ7h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 18:25:02 HKT
# gpg: using RSA key BE07D9FD54809AB2C4B0FF5F63762CDA67E2F359
# gpg: issuer "dwmw2@infradead.org"
# gpg: Good signature from "David Woodhouse <dwmw2@infradead.org>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@exim.org>" [unknown]
# gpg: aka "David Woodhouse <david@woodhou.se>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@kernel.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE07 D9FD 5480 9AB2 C4B0 FF5F 6376 2CDA 67E2 F359
* tag 'pull-xenfv-stable-20231106' of git://git.infradead.org/users/dwmw2/qemu:
hw/xen: use correct default protocol for xen-block on x86
hw/xen: take iothread mutex in xen_evtchn_reset_op()
hw/xen: fix XenStore watch delivery to guest
hw/xen: don't clear map_track[] in xen_gnttab_reset()
hw/xen: select kernel mode for per-vCPU event channel upcall vector
i386/xen: fix per-vCPU upcall vector for Xen emulation
i386/xen: Don't advertise XENFEAT_supervisor_mode_kernel
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
During the FDT generation use the existing mask containing the enabled
counters rather then generating a new one. Using the existing mask will
support the use of discontinuous counters.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-4-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We currently don't clear the interrupts if they are disabled. This means
that if an interrupt occurs and the guest disables interrupts the QEMU
IRQ will remain high.
This doesn't immediately affect guests, but if the
guest re-enables interrupts it's possible that we will miss an
interrupt as it always remains set.
Let's update the logic to always call qemu_set_irq() even if the
interrupts are disabled to ensure we set the level low. The level will
never be high unless interrupts are enabled, so we won't generate
interrupts when we shouldn't.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231102003424.2003428-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicboz they're more likely to do 'grep -i zicboz' than 'grep -i
icboz'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicbom they're more likely to do 'grep -i zicbom' than 'grep -i
icbom'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a leading 'z' to improve grepping. When one wants to search for uses
of zicsr they're more likely to do 'grep -i zicsr' than 'grep -i icsr'.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231012164604.398496-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On the vexpress-a9 board we try to map both RAM and flash to address 0,
as seen in "info mtree":
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000003ffffff (prio 0, romd): alias vexpress.flashalias @vexpress.flash0 0000000000000000-0000000003ffffff
0000000000000000-0000000003ffffff (prio 0, ram): alias vexpress.lowmem @vexpress.highmem 0000000000000000-0000000003ffffff
0000000010000000-0000000010000fff (prio 0, i/o): arm-sysctl
0000000010004000-0000000010004fff (prio 0, i/o): pl041
(etc)
The flash "wins" and the RAM mapping is useless (but also harmless).
This happened as a result of commit 6ec1588e in 2014, which changed
"we always map the RAM to the low addresses for vexpress-a9" to "we
always map flash in the low addresses", but forgot to stop mapping
the RAM.
In real hardware, this low part of memory is remappable, both at
runtime by the guest writing to a control register, and configurably
as to what you get out of reset -- you can have the first flash
device, or the second, or the DDR2 RAM, or the external AXI bus
(which for QEMU means "nothing there"). In an ideal world we would
support that remapping both at runtime and via a machine property to
select the out-of-reset behaviour.
Pending anybody caring enough to implement the full remapping
behaviour:
* remove the useless mapped-but-inaccessible lowram MR
* document that QEMU doesn't support remapping of low memory
Fixes: 6ec1588e ("hw/arm/vexpress: Alias NOR flash at 0 for vexpress-a9")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1761
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231103185602.875849-1-peter.maydell@linaro.org
Coverity signals that variable as being used uninitialized. And really,
when work with external APIs that's better to zero out the structure,
where we set some fields by hand.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-6-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
set_time() function doesn't set all the fields, so it's better to
initialize tm structure. And Coverity will be happier about it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-4-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We support only 3- and 4-level page-tables, which is firstly checked in
vtd_decide_config(), then setup in vtd_init(). Than level fields are
checked by vtd_is_level_supported().
So here we can't have level out from 1..4 inclusive range. Let's assert
it. That also explains Coverity that we are not going to overflow the
array.
CID: 1487158, 1487186
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-2-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Documentation for using the GAS in ACPI tables to report debug UART addresses at
https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
states the following:
- The Register Bit Width field contains the register stride and must be a
power of 2 that is at least as large as the access size. On 32-bit
platforms this value cannot exceed 32. On 64-bit platforms this value
cannot exceed 64.
- The Access Size field is used to determine whether byte, WORD, DWORD, or
QWORD accesses are to be used. QWORD accesses are only valid on 64-bit
architectures.
Documentation for the ARM PL011 at
https://developer.arm.com/documentation/ddi0183/latest/
states that the registers are:
- spaced 4 bytes apart (see Table 3-2), so register stride must be 32.
- 16 bits in size in some cases (see individual registers), so access
size must be at least 2.
Linux doesn't seem to care about this error in the table, but it does
affect at least the NOVA microhypervisor.
In theory we therefore have a choice between reporting the access
size as 2 (16 bit accesses) or 3 (32-bit accesses). In practice,
Linux does not correctly handle the case where the table reports the
access size as 2: as of kernel commit 750b95887e5678, the code in
acpi_parse_spcr() tries to tell the serial driver to use 16 bit
accesses by passing "mmio16" in the option string, but the PL011
driver code in pl011_console_match() only recognizes "mmio" or
"mmio32". The result is that unless the user has enabled 'earlycon'
there is no console output from the guest kernel.
We therefore choose to report the access size as 32 bits; this works
for NOVA and also for Linux. It is also what the UEFI firmware on a
Raspberry Pi 4 reports, so we're in line with existing real-world
practice.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1938
Signed-off-by: Udo Steinberg <udo@hypervisor.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweaks; use 32 bit accesses]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
PMU IRQ registration fails for arm64 guests:
[ 0.563689] hw perfevents: unable to request IRQ14 for ARM PMU counters
[ 0.565160] armv8-pmu: probe of pmu failed with error -22
That commit re-defined VIRTUAL_PMU_IRQ to be a INTID but missed a case
where the PMU IRQ is actually referred by its PPI index. Fix that by using
INTID_TO_PPI() in that case.
Fixes: 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1960
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 475d918d-ab0e-f717-7206-57a5beb28c7b@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we decide to apply this patch (for easier backporting reasons), we
can now revert it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Add the necessary plumbing for the hv-balloon driver to the PC machine.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Used by the hv-balloon driver for (optional) guest memory status reports.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Used by the driver to report its provided memory state information.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
One of advantages of using this protocol over ACPI-based PC DIMM hotplug is
that it allows hot-adding memory in much smaller granularity because the
ACPI DIMM slot limit does not apply.
In order to enable this functionality a new memory backend needs to be
created and provided to the driver via the "memdev" parameter.
This can be achieved by, for example, adding
"-object memory-backend-ram,id=mem1,size=32G" to the QEMU command line and
then instantiating the driver with "memdev=mem1" parameter.
The device will try to use multiple memslots to cover the memory backend in
order to reduce the size of metadata for the not-yet-hot-added part of the
memory backend.
Co-developed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This driver is like virtio-balloon on steroids: it allows both changing the
guest memory allocation via ballooning and (in the next patch) inserting
pieces of extra RAM into it on demand from a provided memory backend.
The actual resizing is done via ballooning interface (for example, via
the "balloon" HMP command).
This includes resizing the guest past its boot size - that is, hot-adding
additional memory in granularity limited only by the guest alignment
requirements, as provided by the next patch.
In contrast with ACPI DIMM hotplug where one can only request to unplug a
whole DIMM stick this driver allows removing memory from guest in single
page (4k) units via ballooning.
After a VM reboot the guest is back to its original (boot) size.
In the future, the guest boot memory size might be changed on reboot
instead, taking into account the effective size that VM had before that
reboot (much like Hyper-V does).
For performance reasons, the guest-released memory is tracked in a few
range trees, as a series of (start, count) ranges.
Each time a new page range is inserted into such tree its neighbors are
checked as candidates for possible merging with it.
Besides performance reasons, the Dynamic Memory protocol itself uses page
ranges as the data structure in its messages, so relevant pages need to be
merged into such ranges anyway.
One has to be careful when tracking the guest-released pages, since the
guest can maliciously report returning pages outside its current address
space, which later clash with the address range of newly added memory.
Similarly, the guest can report freeing the same page twice.
The above design results in much better ballooning performance than when
using virtio-balloon with the same guest: 230 GB / minute with this driver
versus 70 GB / minute with virtio-balloon.
During a ballooning operation most of time is spent waiting for the guest
to come up with newly freed page ranges, processing the received ranges on
the host side (in QEMU and KVM) is nearly instantaneous.
The unballoon operation is also pretty much instantaneous:
thanks to the merging of the ballooned out page ranges 200 GB of memory can
be returned to the guest in about 1 second.
With virtio-balloon this operation takes about 2.5 minutes.
These tests were done against a Windows Server 2019 guest running on a
Xeon E5-2699, after dirtying the whole memory inside guest before each
balloon operation.
Using a range tree instead of a bitmap to track the removed memory also
means that the solution scales well with the guest size: even a 1 TB range
takes just a few bytes of such metadata.
Since the required GTree operations aren't present in every Glib version
a check for them was added to the meson build script, together with new
"--enable-hv-balloon" and "--disable-hv-balloon" configure arguments.
If these GTree operations are missing in the system's Glib version this
driver will be skipped during QEMU build.
An optional "status-report=on" device parameter requests memory status
events from the guest (typically sent every second), which allow the host
to learn both the guest memory available and the guest memory in use
counts.
Following commits will add support for their external emission as
"HV_BALLOON_STATUS_REPORT" QMP events.
The driver is named hv-balloon since the Linux kernel client driver for
the Dynamic Memory Protocol is named as such and to follow the naming
pattern established by the virtio-balloon driver.
The whole protocol runs over Hyper-V VMBus.
The driver was tested against Windows Server 2012 R2, Windows Server 2016
and Windows Server 2019 guests and obeys the guest alignment requirements
reported to the host via DM_CAPABILITIES_REPORT message.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
There is no strong requirement that the size has to be multiples of the
requested alignment, let's drop it. This is a preparation for hv-baloon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This reverts commit 5960f254db since the
previous commit made this situation possible again.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Only spapr supports a customed host window list, other vfio driver
assume 64bit host window. So remove the check in listener callback
and move vfio_host_win_add/del into spapr.c and make it static.
With the check removed, we still need to do the same check for
VFIO_SPAPR_TCE_IOMMU which allows a single host window range
[dma32_window_start, dma32_window_size). Move vfio_find_hostwin
into spapr.c and do same check in vfio_container_add_section_window
instead.
When mapping a ram device section, if it's unaligned with
hostwin->iova_pgsizes, this mapping is bypassed. With hostwin
moved into spapr, we changed to check container->pgsizes.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_spapr_create_window calls vfio_spapr_remove_window,
With reoder of definition of the two, we can make
vfio_spapr_create/remove_window static.
No functional changes intended.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move spapr specific init/deinit code into spapr.c and wrap
them with vfio_spapr_container_init/deinit, this way footprint
of spapr is further reduced, vfio_prereg_listener could also
be made static.
vfio_listener_release is unnecessary when prereg_listener is
moved out, so have it removed.
No functional changes intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_container_add/del_section_window are spapr specific functions,
so move them into spapr.c to make container.c cleaner.
No functional changes intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
