The test case #310 is similar to #216 by Max Reitz. The difference is
that the test #310 involves a bottom node to the COR filter driver.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[vsementsov: detach backing to test reads from top, limit to qcow2]
Message-Id: <20201216061703.70908-7-vsementsov@virtuozzo.com>
[mreitz: Add "# group:" line]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unfortunately commit "iotests: handle tmpfs" breaks running iotests
with -nbd -nocache, as _check_o_direct tries to create
$TEST_IMG.test_o_direct, but in case of nbd TEST_IMG is something like
nbd+unix:///... , and test fails with message
qemu-img: nbd+unix:///?socket[...]test_o_direct: Protocol driver
'nbd' does not support image creation, and opening the image
failed: Failed to connect to '/tmp/tmp.[...]/nbd/test_o_direct': No
such file or directory
Use TEST_DIR instead.
Fixes: cfdca2b9f9
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201218182012.47607-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Just drop code duplication.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201130134024.19212-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_img_args variable is unrelated here. We should print just args.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201130134024.19212-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix long line, extra import and one mypy complaint about incompatible
int and float.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201118180433.11931-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to drop group file. Define group in tests as a preparatory
step.
The patch is generated by
cd tests/qemu-iotests
grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
All other test files are executable. Fix these.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to be stricter about comparing test result with .out
files. So, fix some whitespaces now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If you run './check 303', check includes common.config which adjusts
$PATH to include '.' first, and therefore finds qcow2.py on PATH. But
if you run './303' directly, there is nothing to adjust PATH, and if
'.' is not already on your PATH by other means, the test fails because
the executable is not found. Adjust how we invoke the helper
executable to avoid needing a PATH search in the first place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If you run './check 277', check includes common.config which adjusts
$PATH to include '.' first, and therefore finds nbd-fault-injector.py
on PATH. But if you run './277' directly, there is nothing to adjust
PATH, and if '.' is not already on your PATH by other means, the test
fails because the executable is not found. Adjust how we invoke the
helper executable to avoid needing a PATH search in the first place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The "auto" documentation states:
That means they should run with every QEMU binary (also non-x86)
which is not the case as the check-system-fedora build which only
includes a rag tag group of rare and deprecated targets doesn't
support the virtio device required.
Fixes: ef9bba1484 ("quorum: Implement bdrv_co_block_status()")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210105100402.12350-1-alex.bennee@linaro.org>
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl/cwIoSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AnvMH+gOnZCwEUKWuBxGX3Wjb/kqV1OuhAhcP
IVrKLRnqdarCYMQ9M4SZL6pedfsujHA7vClTV7NTrenXBsEIradBQ59ztQ0oDirS
4ipIjVtNqj7m86l+IRZDq5HlwOYwwFnWogmLo2bcmNJGLpPQQfrhL2vRJ1wLgFYk
WjeAVlkkYcHnTIDvs4ne9WRSlxGVBWJ4X5nSlRdZqeyUcMY9v4wL4P9Wc4ZuORmq
/5HRcT5JKGaT2bAueaqAGEdtPFGbazEP5uU7MTTK/fueDKIRAXO2d0gqhANtOOJQ
7hMmKhwOPOOhrrpCVi9nxsVwdCOHfurV0km6cOs+Iprm/Wm2UtuS/A8=
=z+7k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-12-18' into staging
Block patches:
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
# gpg: Signature made Fri 18 Dec 2020 14:45:30 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-12-18: (30 commits)
iotests: Fix _send_qemu_cmd with bash 5.1
iotests/102: Pass $QEMU_HANDLE to _send_qemu_cmd
block/nvme: Implement fake truncate() coroutine
quorum: Implement bdrv_co_pwrite_zeroes()
quorum: Implement bdrv_co_block_status()
scripts/simplebench: add bench_prealloc.py
simplebench/results_to_text: make executable
simplebench/results_to_text: add difference line to the table
simplebench/results_to_text: improve view of the table
simplebench: move results_to_text() into separate file
simplebench: rename ascii() to results_to_text()
scripts/simplebench: use standard deviation for +- error
scripts/simplebench: support iops
scripts/simplebench: fix grammar: s/successed/succeeded/
iotests: add 298 to test new preallocate filter driver
iotests.py: execute_setup_common(): add required_fmts argument
iotests: qemu_io_silent: support --image-opts
qemu-io: add preallocate mode parameter for truncate command
block: introduce preallocate filter
block: bdrv_check_perm(): process children anyway
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With bash 5.1, the output of the following script changes:
a=("double space")
a=${a[@]:0:1}
echo "$a"
from "double space" to "double space", i.e. all white space is
preserved as-is. This is probably what we actually want here (judging
from the "...to accommodate pathnames with spaces" comment), but before
5.1, we would have to quote the ${} slice to get the same behavior.
In any case, without quoting, the reference output of many iotests is
different between bash 5.1 and pre-5.1, which is not very good. The
output of 5.1 is what we want, so whatever we do to get pre-5.1 to the
same result, it means we have to fix the reference output of basically
all tests that invoke _send_qemu_cmd (except the ones that only use
single spaces in the commands they invoke).
Instead of quoting the ${} slice (cmd="${$@: 1:...}"), we can also just
not use array slicing and replace the whole thing with a simple "cmd=$1;
shift", which works because all callers quote the whole $cmd argument
anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-3-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The first parameter passed to _send_qemu_cmd is supposed to be the
$QEMU_HANDLE. 102 does not do so here, fix it.
As a result, the output changes: Now we see the prompt this command is
supposedly waiting for before the resize message - as it should be.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217153803.101231-2-mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This simply calls bdrv_co_pwrite_zeroes() in all children.
bs->supported_zero_flags is also set to the flags that are supported
by all children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <2f09c842781fe336b4c2e40036bba577b7430190.1605286097.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The quorum driver does not implement bdrv_co_block_status() and
because of that it always reports to contain data even if all its
children are known to be empty.
One consequence of this is that if we for example create a quorum with
a size of 10GB and we mirror it to a new image the operation will
write 10GB of actual zeroes to the destination image wasting a lot of
time and disk space.
Since a quorum has an arbitrary number of children of potentially
different formats there is no way to report all possible allocation
status flags in a way that makes sense, so this implementation only
reports when a given region is known to contain zeroes
(BDRV_BLOCK_ZERO) or not (BDRV_BLOCK_DATA).
If all children agree that a region contains zeroes then we can return
BDRV_BLOCK_ZERO using the smallest size reported by the children
(because all agree that a region of at least that size contains
zeroes).
If at least one child disagrees we have to return BDRV_BLOCK_DATA.
In this case we use the largest of the sizes reported by the children
that didn't return BDRV_BLOCK_ZERO (because we know that there won't
be an agreement for at least that size).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Tao Xu <tao3.xu@intel.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <db83149afcf0f793effc8878089d29af4c46ffe1.1605286097.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-13-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a parameter to skip test if some needed additional formats are not
supported (for example filter drivers).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-12-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
device[NUMBER] thing in QOM path is not stable and tracking it during
code modifications is not fun. Let's filter it like it's already done
in iotest 186.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to original commit, that added this filter (627f607e3d),
the problematic thing in qom path is device[NUMBER], not the whole
path. Seems that tracking the other parts of the path in iotest output
is not bad. Let's make _filter_qom_path stricter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201216095205.526235-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8b1170012b has added a global maximum disk length for the block
layer, so the error message when creating an overly large disk has
changed.
Fixes: 8b1170012b
("block: introduce BDRV_MAX_LENGTH")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201214175158.299919-1-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
See the new comment for why this should be done.
I do not have a reproducer on master, but when using FUSE block exports,
this test breaks depending on the underlying filesystem (for me, it
works on tmpfs, but fails on xfs, because the block allocated by
file-posix has 16 kB there instead of 4 kB).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201207152245.66987-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have good coverage of the normal I/O paths now, but what remains is a
test that tests some more special cases: Exporting an image on itself
(thus turning a formatted image into a raw one), some error cases, and
non-writable and non-growable exports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.
Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pretends FUSE exports are a kind of protocol. As such, they are
always tested under the format node. This is probably the best way to
test them, actually, because this will generate more I/O load and more
varied patterns.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
287 creates an image in a subshell (thanks to the pipe) to see whether
that is possible with compression_type=zstd. If _make_test_img were to
modify any global state, this global state would then be lost before we
could cleanup the image.
When using FUSE as the test protocol, this global state is important, so
clean up the image before the state is lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When most iotests want to create a test image that is named differently
from the default $TEST_IMG, they do something like this:
TEST_IMG="$TEST_IMG.base" _make_test_img $options
This works fine with the "file" protocol, but not so much for anything
else: _make_test_img tries to create an image under $TEST_IMG_FILE
first, and only under $TEST_IMG if the former is not set; and on
everything but "file", $TEST_IMG_FILE is set.
There are two ways we can fix this: First, we could make all tests
adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present
(e.g. with something like _set_test_img_suffix $suffix that would affect
not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a
pretty clean solution, and this is maybe what we should have done from
the start.
But it would also require changes to most existing bash tests. So the
alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still
points to the original value. If so, it is possible that the caller has
adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for
most protocols) derive the corresponding $TEST_IMG_FILE value from
$TEST_IMG value and thus work around what technically is the caller
misbehaving.
This second solution is less clean, but it is robust against people
keeping their old habit of adjusting TEST_IMG only, and requires much
less changes. So this patch implements it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-15-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most Python tests are restricted to the file protocol (without
explicitly saying so), but these are the ones that would break
./check -fuse -qcow2.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the test environment has some other child processes running (like a
storage daemon that provides a FUSE export), then "wait" will never
finish. Use wait=yes _cleanup_qemu instead.
(We need to discard the output so there is no change to the reference
output.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-13-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid creating images with custom filenames in $TEST_DIR, because
non-file protocols may want to keep $TEST_IMG (and all other test
images) in some other directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-12-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This generally does not work on non-file protocols. It is better to
create the image with the final name from the start, and most tests do
this already. Let 046 follow suit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img convert (without -n) can often be replaced by a combination of
_make_test_img + qemu-img convert -n. Doing so allows converting to
protocols that do not allow direct file creation, such as FUSE exports.
The only problem is that for formats other than qcow2 and qed (qcow1 at
least), this may lead to high disk usage for some reason, so we cannot
do it everywhere.
But we can do it in 028 and 089, so let us do that so they can run on
FUSE exports. Also, in 028 this allows us to remove a 9-line comment
that used to explain why we cannot safely filter drive-backup's image
creation output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-10-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Executing _make_test_img as part of a pipe will undo all variable
changes it has done. As such, this could not work with FUSE (because
we want to remember all of our exports and their qemu instances).
Replace the pipe by a temporary file in 071 and 174 (the two tests that
can run on FUSE).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In most cases, _make_test_img does not need a _filter_imgfmt on top. It
does that by itself.
(The exception is when IMGFMT has been overwritten but TEST_IMG has not.
In such cases, we do need a _filter_imgfmt on top to filter the test's
original IMGFMT from TEST_IMG.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block-commit defaults @base-node to the deepest backing image. When
there is none, it fails with "Base 'NULL' not found". Improve to
"There is no backing image".
block-commit and block-stream reject a @base argument that doesn't
resolve with "Base 'BASE' not found". Commit 6b33f3ae8b "qemu-img:
Improve commit invalid base message" improved this message in
qemu-img. Improve it here, too: "Can't find '%s' in the backing
chain".
QERR_BASE_NOT_FOUND is now unused. Drop.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-4-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Test what happens when a rewrite-corrupted quorum node performs such a
rewrite, while there is no parent that has taken the WRITE permission.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, this breaks whenever the test directory contains the image
format (e.g. "/tmp/test-raw-file" is filtered to "/tmp/test-IMGFMT-file"
instead of "TEST_DIR").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 277 fails on Fedora 33 (Python 3.9) because a deprecation warning
changes the output:
nbd-fault-injector.py:230: DeprecationWarning: This method will be
removed in future versions. Use 'parser.read_file()' instead.
In fact, readfp() has already been deprecated in Python 3.2 and the
replacement has existed since the same version, so we can now
unconditionally switch to read_file().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113100602.15936-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The recent changes that brought RCU delayed device deletion,
broke few tests and this test breakage went unnoticed.
Fix this test by rewriting it in python
(which allows to wait for DEVICE_DELETED events before continuing).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201104185025.434703-3-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
filter_qmp_virtio_scsi can be used to filter virtio-scsi-pci/ccw differences.
Note that this patch was only tested on x86.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201104185025.434703-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
pylint complains about the use of super with the current class and
instance as arguments in VM.__init__():
iotests.py:546:8: R1725: Consider using Python 3 style super() without arguments (super-with-arguments)
No reason not to follow the advice and make it happy, so let's do this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-4-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When run with Python 3.9, pylint incorrectly warns about things like
Optional[foo] because it doesn't recognise Optional as unsubscriptable.
This is a known pylint bug:
https://github.com/PyCQA/pylint/issues/3882
Just disable this check to get rid of the warnings.
Disabling this shouldn't make us miss any real bug because mypy also
has a similar check ("... is not indexable").
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-3-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 1847a4a8c2 clarified that event_wait() can return None (though
only with timeout=0) and commit f12a282ff4 annotated it as returning
Optional[QMPMessage].
Type checks in wait_migration() fail because of the unexpected optional
return type:
iotests.py:750: error: Value of type variable "Msg" of "log" cannot be "Optional[Dict[str, Any]]"
iotests.py:751: error: Value of type "Optional[Dict[str, Any]]" is not indexable
iotests.py:754: error: Value of type "Optional[Dict[str, Any]]" is not indexable
Fortunately, the non-zero default timeout is used in the event_wait()
call, so we can make mypy happy by just asserting this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-2-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
