The PNV I2C Controller was clearing the status register
after a reset without repopulating the "upper threshold
for I2C ports", "Command Complete" and the SCL/SDA input
level fields.
Fixed this for resets caused by a system reset as well
as from writing to the "Immediate Reset" register.
Fixes: 263b81ee15 ("ppc/pnv: Add an I2C controller model")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PNV I2C engines for power9 and power10 were being assigned a base
XSCOM address that was off by one I2C engine's address range such
that engine 0 had engine 1's address and so on. The xscom address
assignment was being based on the device tree engine numbering, which
starts at 1. Rather than changing the device tree numbering to start
with 0, the addressing was changed to be based on the existing device
tree numbers minus one.
Fixes: 1ceda19c28 ("ppc/pnv: Connect PNV I2C controller to powernv10)
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit c3f24257e3.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes: c3f24257e3 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Coverity warns that "i2c_bus_busy(i2c->busses[i]) << i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
While we are at it, introduce a PNV_I2C_MAX_BUSSES constant and check
the number of busses at realize time.
Fixes: Coverity CID 1523918
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
x70WR8HrtkadsUddgSGzFRChaVb0/wI=
=Sapq
-----END PGP SIGNATURE-----
Merge tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
HPPA64-PATCHES-for-8.2
Two patches for 8.2.
The SHRPD patch fixes a real translation bug which then allows to boot
the 64-bit Linux kernels of the Debian-11 and Debian-12 installation CDs.
The second patch adds the instruction byte sequence to the
assembly log. This is not an actual bug fix, but it's important since
it helps a lot when trying to fix qemu translation bugs on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVfHPwAKCRD3ErUQojoP
# X3TrAQD2SfFsTWIYqTamh1ZHmydaJRL1xhXmPMqXgXFkDmiyhQD/VeyIyWEGj5Oe
# x70WR8HrtkadsUddgSGzFRChaVb0/wI=
# =Sapq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Nov 2023 15:04:15 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
disas/hppa: Show hexcode of instruction along with disassembly
target/hppa: Fix 64-bit SHRPD instruction
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In FDPIC signal handlers are passed around as FD pointers. Actual code
address and GOT pointer must be fetched from memory by the QEMU code
that implements kernel signal delivery functionality. This change is
equivalent to the following kernel change:
9c2cc74fb31e ("xtensa: fix signal delivery to FDPIC process")
Cc: qemu-stable@nongnu.org
Fixes: d2796be69d ("linux-user: add support for xtensa FDPIC")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On hppa many instructions can be expressed by different bytecodes.
To be able to debug qemu translation bugs it's therefore necessary to see the
currently executed byte codes without the need to lookup the sequence without
the full executable.
With this patch the instruction byte code is shown beside the disassembly.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When shifting the two joined 64-bit registers right, shift the upper
64-bit register to the left and the lower 64-bit register to the right
before merging them with OR.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Improve
$ qemu-system-x86_64 -device max-x86_64-cpu,vendor=me
qemu-system-x86_64: -device max-x86_64-cpu,vendor=me: Property '.vendor' doesn't take value 'me'
to
qemu-system-x86_64: -device max-x86_64-cpu,vendor=0123456789abc: value of property 'vendor' must consist of exactly 12 characters
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Typo corrected]
The error message
{"execute": "balloon", "arguments":{"value": -1}}
{"error": {"class": "GenericError", "desc": "Parameter 'target' expects a size"}}
points to 'target' instead of 'value'. Fix:
{"error": {"class": "GenericError", "desc": "Parameter 'value' expects a size"}}
Root cause: qmp_balloon()'s parameter is named @target. Rename it to
@value to match the QAPI schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-7-armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
The error message
$ qemu-system-x86_64 -netdev user,id=net0,ipv6-net=fec0::0/
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: Parameter 'ipv6-prefixlen' expects a number
points to ipv6-prefixlen instead of ipv6-net. Fix:
qemu-system-x86_64: -netdev user,id=net0,ipv6-net=fec0::0/: parameter 'ipv6-net' expects a number after '/'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-6-armbru@redhat.com>
set_password with "protocol": "vnc" supports only "connected": "keep".
Any other value is rejected with
Invalid parameter 'connected'
Improve this to
parameter 'connected' must be 'keep' when 'protocol' is 'vnc'
client_migrate_info requires "port" or "tls-port". When both are
missing, it fails with
Parameter 'port/tls-port' is missing
Improve this to
parameter 'port' or 'tls-port' is required
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When the PID passed to guest-exec-status does not exist, we report
"Invalid parameter 'pid'"
Improve this to
"PID 1234 does not exist"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-4-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Improve
(qemu) sync-profile of
Error: Invalid parameter 'of'
to
Error: invalid parameter 'of', expecting 'on', 'off', or 'reset'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
When dynamic-reconfiguration is off, hot plug / unplug can fail with
"Bus 'spapr-pci-host-bridge' does not support hotplugging".
spapr-pci-host-bridge is a device, not a bus. Report the name of the
bus it provides instead: 'pci.0'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-2-armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Like replay_linux.py, reverse_debugging.py starts the vm with console
set but does not interact with it (e.g., with wait_for_console_pattern).
In this situation, the console should have a drainer attached so the
socket does not fill. replay_linux.py has a drainer, but it is missing
from reverse_debugging.py.
Per analysis in Link: this can cause the console socket/pipe to fill and
QEMU get stuck in qemu_chr_write_buffer, leading to strange test case
failures (ppc64 fails because it prints a lot to console in early bios).
Attaching a drainer prevents this.
Note, this commit does not fix bugs introduced by the commits referenced
in the first two Fixes: tags, but together those commits conspire to
irritate the problem and cause test case failure, which this commit
fixes.
Link: https://lore.kernel.org/qemu-devel/ZVT-bY9YOr69QTPX@redhat.com/
Fixes: 1d4796cd00 ("python/machine: use socketpair() for console connections")
Fixes: 761a13b239 ("tests/avocado: ppc64 reverse debugging tests for pseries and powernv")
Fixes: be52eca309 ("tests/acceptance: add reverse debugging test")
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20231116115354.228678-1-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231116061956.14676-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's failing very often, so don't run this by default anymore
until it gets fixed.
Message-ID: <20231114153019.295131-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a perfect world we'd have reproducible tests,
but then we'd be sure we run the same binaries.
If a binary artifact isn't hashed, we have no idea
what we are running. Therefore enforce hashing for
all our artifacts.
With this change, unhashed artifacts produce:
$ avocado run tests/avocado/multiprocess.py
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
ERROR: QemuBaseTest.fetch_asset() missing 1 required positional argument: 'asset_hash' (0.19 s)
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20231115205149.90765-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The multiprocess test is currently succeeding with an annoying warning:
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
WARN: Test passed but there were warnings during execution. Check
the log for details
In the log, you can find an entry like:
WARNI| No hash provided. Cannot check the asset file integrity.
Add the proper asset hashes to avoid those warnings.
Message-ID: <20231115145852.494052-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The intel_iommu test is currently succeeding with annoying warnings.
Add the proper asset hashes to avoid those.
Message-ID: <20231114143531.291820-1-thuth@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "edid" feature has been added to vhost-user-gpu in commit
c06444261e ("contrib/vhost-user-gpu: implement get_edid feature"),
so waiting for "features: +virgl -edid" in the test does not work
anymore, it's "+edid" instead of "-edid" now!
While we're at it, move the expected string to the preceeding
exec_command_and_wait_for_pattern() instead (since waiting for
empty string here does not make too much sense).
Message-ID: <20231114203456.319093-1-thuth@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231114134326.287242-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 2e12dd405c "util/filemonitor-inotify: qemu_file_monitor_watch(): assert no overflow"
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 631c872614 "tests/qtest: Introduce tests for UFS"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: bc4e68d362 "hw/ufs: Initial commit for emulated Universal-Flash-Storage"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: c755c943aa "hw/net/cadence_gem: use REG32 macro for register definitions"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 6c1b28e9e4 "memory-device: Support empty memory devices"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: bb67ec32a0 "target/hppa: Include PSW_P in tb flags and mmu index"
Fixes: d7553f3591 "target/hppa: Populate an interval tree with valid tlb entries"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 179e9a3bac "target/arm: Define new TB flag for ATA0"
Fixes: 5d7b37b5f6 "target/arm: Implement the CPY* instructions"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 593c28c02c "migration/doc: How to migrate when hosts have different features"
Fixes: 1aefe2ca14 "migration/doc: Add documentation for backwards compatiblity"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 864128df46 "migration: Deprecate old compression method"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 761e3c1088 "gdbstub: fixes cases where wrong threads were reported to GDB on SIGINT"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 388d6b574e "hw/cxl: Use switch statements for read and write of cachemem registers"
Fixes: 3314efd276 "hw/cxl/mbox: Add Physical Switch Identify command."
Fixes: 004e3a93b8 "hw/cxl: Add tunneled command support to mailbox for switch cci."
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
