Commit Graph

170 Commits

Author SHA1 Message Date
Alex Bennée
b5bd744042 target/arm: relax permission checks for HWCAP_CPUID registers
Although technically not visible to userspace the kernel does make
them visible via a trap and emulate ABI. We provide a new permission
mask (PL0U_R) which maps to PL0_R for CONFIG_USER builds and adjust
the minimum permission check accordingly.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-15 09:56:38 +00:00
Peter Maydell
a15945d98d target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
The {IOE, DZE, OFE, UFE, IXE, IDE} bits in the FPSCR/FPCR are for
enabling trapped IEEE floating point exceptions (where IEEE exception
conditions cause a CPU exception rather than updating the FPSR status
bits). QEMU doesn't implement this (and nor does the hardware we're
modelling), but for implementations which don't implement trapped
exception handling these control bits are supposed to be RAZ/WI.
This allows guest code to test for whether the feature is present
by trying to write to the bit and checking whether it sticks.

QEMU is incorrectly making these bits read as written. Make them
RAZ/WI as the architecture requires.

In particular this was causing problems for the NetBSD automatic
test suite.

Reported-by: Martin Husemann <martin@netbsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190131130700.28392-1-peter.maydell@linaro.org
2019-02-05 16:52:42 +00:00
Richard Henderson
4a9ee99db3 target/arm: Add TBFLAG_A64_TBID, split out gen_top_byte_ignore
Split out gen_top_byte_ignore in preparation of handling these
data accesses; the new tbflags field is not yet honored.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05 16:52:39 +00:00
Richard Henderson
08f1434a71 target/arm: Add BT and BTYPE to tb->flags
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05 16:52:36 +00:00
Richard Henderson
f6e52eaac1 target/arm: Add PSTATE.BTYPE
Place this in its own field within ENV, as that will
make it easier to reset from within TCG generated code.

With the change to pstate_read/write, exception entry
and return are automatically handled.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05 16:52:36 +00:00
Richard Henderson
be53b6f4d7 target/arm: Introduce isar_feature_aa64_bti
Also create field definitions for id_aa64pfr1 from ARMv8.5.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05 16:52:36 +00:00
Remi Denis-Courmont
f6768aa1b4 target/arm: fix AArch64 virtual address space size
Since QEMU does not support the ARMv8.2-LVA, Large Virtual Address,
extension (yet), the VA address space is 48-bits plus a sign bit. User
mode can only handle the positive half of the address space, so that
makes a limit of 48 bits.

(With LVA, it would be 53 and 52 bits respectively.)

The incorrectly large address space conflicts with PAuth instructions,
which use bits 48-54 and 56-63 for the pointer authentication code. This
also conflicts with (as yet unsupported by QEMU) data tagging and with
the ARMv8.5-MTE extension.

Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01 15:23:51 +00:00
Aaron Lindsay OS
4e7beb0cc0 target/arm: Add a timer to predict PMU counter overflow
Make PMU overflow interrupts more accurate by using a timer to predict
when they will overflow rather than waiting for an event to occur which
allows us to otherwise check them.

Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190124162401.5111-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01 14:55:45 +00:00
Aaron Lindsay OS
bf8d09694c target/arm: Don't clear supported PMU events when initializing PMCEID1
A bug was introduced during a respin of:

	commit 57a4a11b2b
	target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0

This patch introduced two calls to get_pmceid() during CPU
initialization - one each for PMCEID0 and PMCEID1. In addition to
building the register values, get_pmceid() clears an internal array
mapping event numbers to their implementations (supported_event_map)
before rebuilding it. This is an optimization since much of the logic is
shared. However, since it was called twice, the contents of
supported_event_map reflect only the events in PMCEID1 (the second call
to get_pmceid()).

Fix this bug by moving the initialization of PMCEID0 and PMCEID1 back
into a single function call, and name it more appropriately since it is
doing more than simply generating the contents of the PMCEID[01]
registers.

Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190123195814.29253-1-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29 11:46:04 +00:00
Aaron Lindsay
5ecdd3e47c target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER
Add arrays to hold the registers, the definitions themselves, access
functions, and logic to reset counters when PMCR.P is set. Update
filtering code to support counters other than PMCCNTR. Support migration
with raw read/write functions.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-11-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:56 +00:00
Aaron Lindsay
57a4a11b2b target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0
This commit doesn't add any supported events, but provides the framework
for adding them. We store the pm_event structs in a simple array, and
provide the mapping from the event numbers to array indexes in the
supported_event_map array. Because the value of PMCEID[01] depends upon
which events are supported at runtime, generate it dynamically.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:56 +00:00
Aaron Lindsay
cad8673744 target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-9-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:56 +00:00
Aaron Lindsay
beceb99c0c target/arm: Define FIELDs for ID_DFR0
This is immediately necessary for the PMUv3 implementation to check
ID_DFR0.PerfMon to enable/disable specific features, but defines the
full complement of fields for possible future use elsewhere.

Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-8-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:56 +00:00
Aaron Lindsay
033614c47d target/arm: Filter cycle counter based on PMCCFILTR_EL0
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-5-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:55 +00:00
Aaron Lindsay
5d05b9d462 target/arm: Reorganize PMCCNTR accesses
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:55 +00:00
Richard Henderson
5d8634f5a3 target/arm: Reuse aa64_va_parameters for setting tbflags
The arm_regime_tbi{0,1} functions are replacable with the new function
by giving the lowest and highest address.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:54 +00:00
Richard Henderson
476a4692f0 target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII
We will shortly want to talk about TBI as it relates to data.
Passing around a pair of variables is less convenient than a
single variable.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:54 +00:00
Richard Henderson
50494a279d target/arm: Introduce arm_mmu_idx
The pattern

  ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));

is computing the full ARMMMUIdx, stripping off the ARM bits,
and then putting them back.

Avoid the extra two steps with the appropriate helper function.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:54 +00:00
Richard Henderson
65e4655c60 target/arm: Move cpu_mmu_index out of line
This function is, or will shortly become, too big to inline.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:53 +00:00
Richard Henderson
0816ef1bfc target/arm: Add PAuth active bit to tbflags
There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:53 +00:00
Richard Henderson
b2af69d0b6 target/arm: Add SCTLR bits through ARMv8.5
Post v8.4 bits taken from SysReg_v85_xml-00bet8.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:38:52 +00:00
Richard Henderson
991ad91b6a target/arm: Add state for the ARMv8.3-PAuth extension
Add storage space for the 5 encryption keys.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-2-richard.henderson@linaro.org
[PMM: use 0xf rather than -1 in FIELD_DP64() expressions to
 avoid clang warnings about implicit truncation from int to
 bitfield changing the value]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21 10:23:11 +00:00
Peter Maydell
c102d9471f target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
  * hw/misc/tz-mpc: Fix value of BLK_MAX register
  * target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
  * nRF51 SoC: add timer, GPIO, RNG peripherals
  * hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
  * cpus.c: Fix race condition in cpu_stop_current()
  * hw/arm: versal: Plug memory leaks
  * Allow M profile boards to run even if -kernel not specified
  * gdbstub: Add multiprocess extension support for use when the
    board has multiple CPUs of different types (like the Xilinx Zynq boards)
  * target/arm: Don't decode S bit in SVE brk[ab] merging insns
  * target/arm: Convert ARM_TBFLAG_* to FIELDs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJcM36AAAoJEDwlJe0UNgzepuMP/A6umcXRrO+vOZgkW+cvJ8cD
 JkDdb8H/u3S6zqNokABI3Ya/areX1P30sRV7e7mC5IsknVNZe0MqQX6TW5477HMP
 Oz/m1AbyByWMLVILFiWfte5dtRRLfs3axzrmhu6HwJXe0NIUiYQofoJzCZEDMxDn
 71cehgeNkUGA36HViPyqzHZYADFkCX3Tfmh1FEh2jD7taK9GNsff8p6cHTb05W7d
 wWk68PS8VKTb5VrYH6SyiAHW8gBVrrUkYlkPKHzemK5fwlgDOSfxVLthf8mo08SH
 QxEXI430tagdmrGNO/nKOTA2NQwMzvCk/OLf0Qwg9I9F9pYtiOJ7nXXbtqDC8eKy
 DdHsL57W0F7sFkoVt+YNHSeylyLRluDh+D+Q7OHnlvwsEYmecqsWkW/A2CYC0uWs
 8ajxPBNpGG1lIvo63YK5/4kOy0DE/6ISljYOSlYYg3iXeAZPkQZMTlUxoYmJQ+Zr
 h1tLg1N9SuyQK5g5Uuluw2GwgzIv/Bt1LFo7pnvsA2X6PKiv6nno40T8q0Lw6ah4
 lmAUWx0OUilTrvQwterHlr6hfWu2RLiRoxCg06a3C93YlRjsR3vZOBeQ5ByaE+ho
 5ItKn58EerO+UaweVoc6MDhJFPC8b16Eee281BCec8Ks4GR1tIcpP/0z2lUwhBu6
 hoPmkoPtFtu1dKBgF8Ma
 =x1jv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging

target-arm queue:
 * Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
 * hw/misc/tz-mpc: Fix value of BLK_MAX register
 * target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
 * nRF51 SoC: add timer, GPIO, RNG peripherals
 * hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
 * cpus.c: Fix race condition in cpu_stop_current()
 * hw/arm: versal: Plug memory leaks
 * Allow M profile boards to run even if -kernel not specified
 * gdbstub: Add multiprocess extension support for use when the
   board has multiple CPUs of different types (like the Xilinx Zynq boards)
 * target/arm: Don't decode S bit in SVE brk[ab] merging insns
 * target/arm: Convert ARM_TBFLAG_* to FIELDs

# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
  Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
  hw/misc/tz-mpc: Fix value of BLK_MAX register
  target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
  arm: Add Clock peripheral stub to NRF51 SOC
  tests/microbit-test: Add Tests for nRF51 Timer
  arm: Instantiate NRF51 Timers
  hw/timer/nrf51_timer: Add nRF51 Timer peripheral
  tests/microbit-test: Add Tests for nRF51 GPIO
  arm: Instantiate NRF51 general purpose I/O
  hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
  arm: Instantiate NRF51 random number generator
  hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
  arm: Add header to host common definition for nRF51 SOC peripherals
  qtest: Add set_irq_in command to set IRQ/GPIO level
  hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
  cpus.c: Fix race condition in cpu_stop_current()
  MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
  hw/arm: versal: Plug memory leaks
  Revert "armv7m: Guard against no -kernel argument"
  arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 16:56:33 +00:00
Richard Henderson
aad821ac4f target/arm: Convert ARM_TBFLAG_* to FIELDs
Use "register" TBFLAG_ANY to indicate shared state between
A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for
fields that are specific to the given cpu state.

Move ARM_TBFLAG_BE_DATA to shared state, instead of its current
placement within "Bit usage when in AArch32 state".

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181218164348.7127-1-richard.henderson@linaro.org
[PMM: removed the renaming of BE_DATA flag to BE]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07 15:23:45 +00:00
Marc-André Lureau
51e5ef459e arm: replace instance_post_init()
Replace arm_cpu_post_init() instance callback by calling it from leaf
classes, to avoid potential ordering issue with other post_init callbacks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Richard Henderson
2d7137c10f target/arm: Implement the ARMv8.1-LOR extension
Provide a trivial implementation with zero limited ordering regions,
which causes the LDLAR and STLLR instructions to devolve into the
LDAR and STLR instructions from the base ARMv8.0 instruction set.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
f777844460 target/arm: Introduce arm_hcr_el2_eff
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine
that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into
account, as documented for the plethora of bits in HCR_EL2.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
ab638a328f target/arm: Implement the ARMv8.2-AA32HPD extension
The bulk of the work here, beyond base HPD, is defining the
TTBCR2 register.  In addition we must check TTBCR.T2E, which
is not present (RES0) for AArch64.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
ea22747c63 target/arm: Tidy scr_write
Because EL3 has a fixed execution mode, we can properly decide
which of the bits are RES{0,1}.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
99f8f86d36 target/arm: Add SCR_EL3 bits up to ARMv8.5
Post v8.4 bits taken from SysReg_v85_xml-00bet8.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
099bf53b7a target/arm: Add HCR_EL2 bits up to ARMv8.5
Post v8.3 bits taken from SysReg_v85_xml-00bet8.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Peter Maydell
3dc91ddbc6 target/arm: Move id_aa64mmfr* to ARMISARegisters
At the same time, define the fields for these registers,
and use those defines in arm_pamax().

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed up typo (s/achf/ahcf/) belatedly spotted by RTH]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:40:56 +00:00
Peter Maydell
ed89f078ff target/arm: Track the state of our irq lines from the GIC explicitly
Currently we track the state of the four irq lines from the GIC
only via the cs->interrupt_request or KVM irq state. That means
that we assume that an interrupt is asserted if and only if the
external line is set. This assumption is incorrect for VIRQ
and VFIQ, because the HCR_EL2.{VI,VF} bits allow assertion
of VIRQ and VFIQ separately from the state of the external line.

To handle this, start tracking the state of the external lines
explicitly in a CPU state struct field, as is common practice
for devices.

The complicated part of this is dealing with inbound migration
from an older QEMU which didn't have this state. We assume in
that case that the older QEMU did not implement the HCR_EL2.{VI,VF}
bits as generating interrupts, and so the line state matches
the current state in cs->interrupt_request. (This is not quite
true between commit 8a0fc3a29f and its revert, but
that commit is broken and never made it into any released QEMU
version.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-3-peter.maydell@linaro.org
2018-11-13 10:47:59 +00:00
Alex Bennée
22af90255e arm: fix aa64_generate_debug_exceptions to work with EL2
The test was incomplete and incorrectly caused debug exceptions to be
generated when returning to EL2 after a failed attempt to single-step
an EL1 instruction. Fix this while cleaning up the function a little.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-13 10:47:59 +00:00
Alex Bennée
b281ba4223 arm: use symbolic MDCR_TDE in arm_debug_target_el
We already have this symbol defined so lets use it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-13 10:47:59 +00:00
Richard Henderson
0f8d06f16c target/arm: Conditionalize some asserts on aarch32 support
When populating id registers from kvm, on a host that doesn't support
aarch32 mode at all, neither arm_div nor jazelle will be supported either.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181102102025.3546-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-02 14:08:38 +00:00
Richard Henderson
5763190fa8 target/arm: Convert v8.2-fp16 from feature bit to aa64pfr0 test
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:51:31 +01:00
Richard Henderson
cd208a1c39 target/arm: Convert sve from feature bit to aa64pfr0 test
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:51:29 +01:00
Richard Henderson
09cbd50198 target/arm: Convert jazelle from feature bit to isar1 test
Having V6 alone imply jazelle was wrong for cortex-m0.
Change to an assertion for V6 & !M.

This was harmless, because the only place we tested ARM_FEATURE_JAZELLE
was for 'bxj' in disas_arm(), which is unreachable for M-profile cores.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:17 +01:00
Richard Henderson
7e0cf8b47f target/arm: Convert division from feature bits to isar0 tests
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case.  Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Richard Henderson
962fcbf2ef target/arm: Convert v8 extensions from feature bits to isar tests
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Richard Henderson
47576b94af target/arm: Move some system registers into a substructure
Create struct ARMISARegisters, to be accessed during translation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Dongjiu Geng
202ccb6bab target/arm: Add support for VCPU event states
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception.
And also it can support the exception state migration.

The SError exception states include SError pending state and ESR value,
the kvm_put/get_vcpu_events() will be called when set or get system
registers. When do migration, if source machine has SError pending,
QEMU will do this migration regardless whether the target machine supports
to specify guest ESR value, because if target machine does not support that,
it can also inject the SError with zero ESR value.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1538067351-23931-3-git-send-email-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Richard Henderson
a62e62af9f target/arm: Define fields of ISAR registers
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16 16:16:42 +01:00
Richard Henderson
9a05f7b674 target/arm: Fix aarch64_sve_change_el wrt EL0
At present we assert:

  arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.

The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible.  Add an extra argument to provide
it from the surrounding context.

Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16 16:16:42 +01:00
Peter Maydell
86f026de22 target/arm: Define new EXCP type for v8M stack overflows
Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-3-peter.maydell@linaro.org
2018-10-08 14:55:04 +01:00
Peter Maydell
4730fb8503 target/arm: Define new TBFLAG for v8M stack checking
The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181002163556.10279-2-peter.maydell@linaro.org
2018-10-08 14:55:04 +01:00
Richard Henderson
ced3155141 target/arm: Adjust aarch64_cpu_dump_state for system mode SVE
Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.

Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-08 14:55:03 +01:00
Richard Henderson
0ab5953b00 target/arm: Handle SVE vector length changes in system mode
SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.

For correctness, our implementation requires that predicate bits
that are inaccessible are never set.  Which means noticing length
changes and zeroing the appropriate register bits.

Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-08 14:55:02 +01:00
Peter Maydell
6e0fafe2ef target/arm: Remove a handful of stray tabs
Following the bulk conversion of the iwMMXt code, there are
just a handful of hard coded tabs in target/arm; fix them.
This is a whitespace-only patch.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-4-peter.maydell@linaro.org
2018-08-24 13:17:48 +01:00