Computing the deadline of all vm_clocks is somewhat expensive and calls
out to qemu-timer.c; two reasons not to do it in the seqlock's write-side
critical section. This however opens the door for races in setting and
reading vm_clock_warp_start.
To plug them, we need to cover the case where a new deadline slips in
between the call to qemu_clock_deadline_ns_all and the actual modification
of the icount_warp_timer. Restrict changes to vm_clock_warp_start and
the icount_warp_timer's expiration time, to only move them back (which
would simply cause an early wakeup).
If a vm_clock timer is cancelled while CPUs are idle, this might cause the
icount_warp_timer to fire unnecessarily. This is not a problem, after it
fires the timer becomes inactive and the next call to timer_mod_anticipate
will be precise.
In addition to this, we must deactivate the icount_warp_timer _before_
checking whether CPUs are idle. This way, if the "last" CPU becomes idle
during the call to timer_del we will still set up the icount_warp_timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for future code changes, move the increment of qemu_icount_bias
outside the "if" statement.
Also, hoist outside the if the check for timers that expired due to the
"warping". The check is redundant when !runstate_is_running(), but
doing it this way helps because the code that increments qemu_icount_bias
will be a critical section.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help later when we will have to place these calls in
a critical section, and thus call a version of cpu_get_icount()
that does not take the lock.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CLOCK_VIRTUAL may be read outside BQL. This will make its
foundation, i.e. cpu_clock_offset exposed to race condition.
Using private lock to protect it.
After this patch, reading QEMU_CLOCK_VIRTUAL is thread safe
unless use_icount is true, in which case the existing callers
still rely on the BQL.
Lock rule: private lock innermost, ie BQL->"this lock"
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.
The CPU to receive the RESTART interrupt is the "default" one.
There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".
In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
"default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Rearrange timer.h so it is in order by function type.
Make legacy functions call non-legacy functions rather than vice-versa.
Convert cpus.c to use new API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Notify all timerlists derived from vm_clock in icount warp
calculations.
When calculating timer delay based on vm_clock deadline, use
all timerlists.
For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.
NB: thread safety - when different timerlists sit on different
threads, this will need some locking.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It makes more sense and will make things simpler later.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Even if the VM is already stopped, we cannot assume that all data has
already been successfully flushed to disk. The flush during the previous
vm_stop() could have failed.
Run bdrv_flush_all() unconditionally so that we get an error each time
if the block device isn't really flushed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Chegu Vinod
# Via Juan Quintela
* quintela/migration.next:
Force auto-convegence of live migration
Add 'auto-converge' migration capability
Introduce async_run_on_cpu()
Message-id: 1373664508-5404-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If flushing the block devices fails, return an error. The VM is stopped
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce an asynchronous version of run_on_cpu() i.e. the caller
doesn't have to block till the call back routine finishes execution
on the target vcpu.
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.
However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.
Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pass it to qemu_dummy_cpu_thread_fn().
Use CPUState::env_ptr for cpu_single_env.
Prepares for changing qemu_init_vcpu() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pass it on to qemu_kvm_cpu_thread_fn().
Prepares for changing qemu_init_vcpu() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use CPUState::env_ptr for now.
Prepares for changing cpu_handle_guest_debug() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer uses CPUArchState.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed.
Prepares for changing qemu_kvm_init_cpu_signals() argument to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer uses CPUArchState.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer needs CPUArchState.
Prepares for changing all_cpu_threads_idle() CPU loop to CPUState and
needed for changing qemu_kvm_wait_io_event() argument to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Due to a preceding while loop, no CPU would've been put into stopped
state. Reinitialize the variable.
This fixes commit d798e97456 (Allow to use
pause_all_vcpus from VCPU context) for non-KVM case.
While at it, change a 0 to false, amending commit
4fdeee7cd4 (cpu: Move stop field to
CPUState).
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replaces an open-coded loop and hides unused CPUArchState.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also add a stub for it, to make possible to use it in qom/cpu.c,
which is shared with user emulators.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
GetLastError() returns a DWORD value which is unsigned long,
so the correct format specifier is %lu.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
... so it could be called without requiring CPUArchState.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
On multi-core systems, SuspendThread does not guaranty immediate thread
suspension. We add busy loop to wait for effective thread suspension
after call to ThreadSuspend().
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, just less usages of first_cpu and next_cpu fields.
env is passed to cpu_memory_rw_debug(), which in turn passes it to
target-specific cpu_get_phys_page_debug(). Changing both would be a
larger refactoring, so defer that by using env_ptr for now.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The set_cpu_log() function in cpus.c is a fairly simple wrapper
which is only called from one location. Just inline the code
into vl.c, since there is no need to indirect it via cpus.c
and the handling of the error case is more appropriate to vl.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since
the qemu_log functionality is no longer restricted to TCG CPU
debug logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Abstract out the "print a human readable list of all the
valid log categories" functionality which is currently duplicated
in three separate places. (We leave the monitor.c help_cmd()
implementation as-is since it wants to send the message to
the monitor and add its own information.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_log() functionality is no longer specific to TCG CPU debug logs.
Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the
pointless wrapper set_cpu_log_filename().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 20d695a925 (kvm: Pass
CPUState to kvm_arch_*) CPUArchState is no longer needed.
Allows to change qemu_kvm_eat_signals() argument as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
To facilitate the field movements, pass MIPSCPU to malta_mips_config();
avoid that for mips_cpu_map_tc() since callers only access MIPS Thread
Contexts, inside TCG helpers.
Signed-off-by: Andreas Färber <afaerber@suse.de>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
CPUArchState is no longer needed except for iterating the CPUs.
Needed for qemu_tcg_init_vcpu().
KVM and dummy threads still need CPUArchState for cpu_single_env.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]
Old code used !io_thread to know if a thread was an vcpu or not. That
fails when we introduce the iothread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Drop unused DECODE_CPREG_CRN macro
target-arm: use deposit instead of hardcoded version
target-arm: mark a few integer helpers const and pure
target-arm: convert sar, shl and shr helpers to TCG
target-arm: convert add_cc and sub_cc helpers to TCG
target-arm: use globals for CC flags
target-arm: Reinstate display of VFP registers in cpu_dump_state
cpu_dump_state: move DUMP_FPU and DUMP_CCOP flags from x86-only to generic
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Contrary to its name, 'qemu_global_mutex' is only used locally
in cpus.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
On x86 userspace delivers interrupts to the kernel asynchronously
(and therefore VCPU idle management is done in the kernel) if and
only if there is an in-kernel irqchip. On other architectures this
isn't necessarily true (they may always send interrupts
asynchronously), so define a new kvm_async_interrupts_enabled()
function instead of misusing kvm_irqchip_in_kernel().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
CPU_COMMON_THREAD was only used for Windows, adding an hThread field
to CPU_COMMON.
Move the field into QOM CPUState and change its type to HANDLE,
which it is assigned from. This requires Windows headers, pulled in
through qemu-thread.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 946fb27c1 moved all the uses of all_cpu_threads_idle()
into cpus.c. This means we can mark the function 'static'
(again), if we shuffle it a bit earlier in the source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch combines qtest and -icount together to turn the vm_clock
into a source that can be fully managed by the client. To this end new
commands clock_step and clock_set are added. Hooking them with libqtest
is left as an exercise to the reader.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
In order to perform critical manipulations on the VM state in the
context of a VCPU, specifically code patching, stopping and resuming of
all VCPUs may be necessary. resume_all_vcpus is already compatible, now
enable pause_all_vcpus for this use case by stopping the calling context
before starting to wait for the whole gang.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When the TCG thread is started but not yet the machine, we wait in
qemu_tcg_cpu_thread_fn on tcg_halt_cond. To allow run_on_cpu already at
this time, we need to process pending request in that loop.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As we have thread-local cpu_single_env now and KVM uses exactly one
thread per VCPU, we can drop the cpu_single_env updates from the loop
and initialize this variable only once during setup.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On real hardware, NMI button events are injected via the LINT1 line of
the APICs. E.g. kdump expect this wiring and gets upset if the per-APIC
LINT1 mask is not respected, i.e. if NMIs are injected to VCPUs that
should not receive them. Change the APIC emulation code to reflect this.
Based on qemu-kvm patch by Lai Jiangshan.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
These two blocks of code are exactly the same, remove one.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Windows, cpus.c needs access to the hThread. Add a Windows-specific
function to grab it. This requires changing the CPU threads to
joinable. There is no substantial change because the threads run
in an infinite loop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split from Jan's original qemu-thread-posix.c patch. No semantic change,
just introduce the new API that POSIX and Win32 implementations will
conform to.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Please, note that the QMP command has a new 'cpu-index' parameter.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We disable vm_clock when pausing all vcpus, but we forget to
reenable it when resuming all vcpus. It will cause that the
guest can not be rebooted.
Tested-by: Zhi Yong Wu <zwu.kernel@gmai.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After the removal of the non-threaded mode cpu_exec_all is now only used
by TCG. Refactor it accordingly, also dropping its unused return value.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It should be a matter of allowing the transition POSTMIGRATE ->
FINISH_MIGRATE, but it turns out that the VM won't do the
transition the second time because it's already stopped.
So this commit also adds vm_stop_force_state() which performs
the transition even if the VM is already stopped.
While there also allow other states to migrate.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that iothread is always compiled sending a signal seems only an
additional step. This patch also avoid writing to two pipe (one from signal
and one in qemu_service_io).
Work with kvm enabled or disabled. strace output is more readable (less syscalls).
[ kwolf: Merged build fix by Paolo Bonzini ]
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, only vm_start() and vm_stop() change the VM state.
That's, the state is only changed when starting or stopping the VM.
This commit adds the runstate_set() function, which makes it possible
to also do state transitions when the VM is stopped or running.
Additional states are also added and the current state is stored.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Enabling the I/O thread by default seems like an important part of declaring
1.0. Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.
I know there have been concerns about performance. I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.
I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can express the VCPU thread wakeup with the stop mechanism, saving
both qemu_system_ready and the qemu_system_cond. For KVM threads, we can
just enter the main loop as long as the thread is stopped. The central
TCG thread is better held back before the loop as there can be side
effects of the services called even when all CPUs are stopped.
Creating VCPUs in stopped state will also be required for proper CPU
hotplugging support.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In TCG mode, iothread and vcpus run in lock-step. So it's pointless to
send a signal from qemu_cpu_kick to the vcpu thread - if we got here,
the receiver already left the vcpu loop.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This conveys the intention better, and scales to more than >1
threads contending the mutex with the iothread (as long as all
of them have a "quiescent point" like the TCG thread has).
Also, on Mac OS X the fair_mutex somehow didn't work as intended
and deadlocked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Both the signal thread (via sigwait()) and the cpu thread (via
a normal signal handler) were attempting to catch SIG_IPI.
This resulted in random freezes under Darwin.
This patch separates SIG_IPI from the rest of the signals handled
by the signal thread, because it is independently caught by the cpu
thread.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Changes since v1:
- take pthread_sigmask() out of the ifdef as it is now common
to both parts.
This fix effectively blocks, in the main thread, the signals handled
by signalfd or the compatibility signal thread.
This way, such signals are received synchronously in the main thread
through sigfd_handler() instead of triggering the signal handler
directly, asynchronously.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sigset_t, used by that header, is not available in mingw32 environments.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It is purely for icount-based virtual timers. And now that we got the
code right, rename the function to clarify the intended scope.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The previous patch however is not enough, because if the virtual CPU
goes to sleep waiting for a future timer interrupt to wake it up, qemu
deadlocks. The timer interrupt never comes because time is driven by
icount, but the vCPU doesn't run any insns.
You could say that VCPUs should never go to sleep in icount
mode if there is a pending vm_clock timer; rather time should
just warp to the next vm_clock event with no sleep ever taking place.
Even better, you can sleep for some time related to the
time left until the next event, to avoid that the warps are too visible
externally; for example, you could be sending network packets continously
instead of every 100ms.
This is what this patch implements. qemu_clock_warp is called: 1)
whenever a vm_clock timer is adjusted, to ensure the warp_timer is
synchronized; 2) at strategic points in the CPU thread, to make sure
the insn counter is synchronized before the CPU starts running.
In any case, the warp_timer is disabled while the CPU is running,
because the insn counter will then be making progress on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The correct fix for -icount is to consider the biggest difference
between iothread and non-iothread modes. In the traditional model,
CPUs run _before_ the iothread calls select (or WaitForMultipleObjects
for Win32). In the iothread model, CPUs run while the iothread
isn't holding the mutex, i.e. _during_ those same calls.
So, the iothread should always block as long as possible to let
the CPUs run smoothly---the timeout might as well be infinite---and
either the OS or the CPU thread itself will let the iothread know
when something happens. At this point, the iothread wakes up and
interrupts the CPU.
This is exactly the approach that this patch takes: when cpu_exec_all
returns in -icount mode, and it is because a vm_clock deadline has
been met, it wakes up the iothread to process the timers. This is
really the "bulk" of fixing icount.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Here the int values fds[0], sigfd, s, sock and fd are converted
to void pointers which are later converted back to an int value.
These conversions should always use intptr_t instead of unsigned long.
They are needed for environments where sizeof(long) != sizeof(void *).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Based on patch by Glauber Costa:
To allow management applications like libvirt to apply CPU affinities to
the VCPU threads, expose their ID via info cpus. This patch provides the
pre-existing and used interface from qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With in-kernel irqchip support enabled, the vcpu threads sleep in kernel
space while halted. Account for this difference in cpu_thread_is_idle.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit 83f338f73e broke x86 hardware breakpoint emulation by moving the
debug exception handling out of cpu_exec. Fix this by moving all TCG
related bits back, only leaving the generic guest debugging parts in
cpus.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: TeLeMan <geleman@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
qemu_kvm_eat_signals requires POSIX support with realtime extensions for
sigtimedwait. Not all our target platforms provide this. Moreover,
undefined sigbus_reraise was referenced on non-Linux as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Whenever env->created becomes true, qemu_cpu_cond is signaled by
{kvm,tcg}_cpu_thread_fn.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
all_vcpus_paused can start returning true after penv->stopped changes
from 0 to 1. When this is done, qemu_pause_cond is always signaled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_main_loop_start is the only place where qemu_system_ready is set
to 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The following conditions can cause cpu_has_work(env) to become true:
- env->queued_work_first: run_on_cpu is already kicking the VCPU
- env->stop = 1: pause_all_vcpus is already kicking the VCPU
- env->stopped = 0: resume_all_vcpus is already kicking the VCPU
- vm_running = 1: vm_start is calling resume_all_vcpus
- env->halted = 0: see previous patch
- qemu_cpu_has_work(env): when it becomes true, board code should set
env->halted = 0 too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Sometimes vcpus are stopped directly without going through ->stop = 1.
Exit the VCPU execution loop in this case as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We have qemu_cpu_self and qemu_thread_self. The latter is retrieving the
current thread, the former is checking for equality (using CPUState). We
also have qemu_thread_equal which is only used like qemu_cpu_self.
This refactors the interfaces, creating qemu_cpu_is_self and
qemu_thread_is_self as well ass qemu_thread_get_self.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mixing up TCG bits with KVM already led to problems around eflags
emulation on x86. Moreover, quite some code that TCG requires on cpu
enty/exit is useless for KVM. So dispatch between tcg_cpu_exec and
kvm_cpu_exec as early as possible.
The core logic of cpu_halted from cpu_exec is added to
kvm_arch_process_irqchip_events. Moving away from cpu_exec makes
exception_index meaningless for KVM, we can simply pass the exit reason
directly (only "EXCP_DEBUG vs. rest" is relevant).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To prepare splitting up KVM and TCG CPU entry/exit, move the debug
exception into cpus.c and invoke cpu_handle_debug_exception on return
from qemu_cpu_exec.
This also allows to clean up the debug request signaling: We can assign
the job of informing main-loop to qemu_system_debug_request and stop the
calling cpu directly in cpu_handle_debug_exception. That means a debug
stop will now only be signaled via debug_requested and not additionally
via vmstop_requested.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of fiddling with debug_requested and vmstop_requested directly,
introduce qemu_system_debug_request and turn qemu_system_vmstop_request
into a public interface. This aligns those services with exiting ones in
vl.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avoid duplicate use of the function name cpu_has_work, it's confusing,
also their scope. Refactor cpu_has_work to cpu_thread_is_idle and do the
same with any_cpu_has_work.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pure interface cosmetics: Ensure that only kvm core services (as
declared in kvm.h) start with "kvm_". Prepend "qemu_" to those that
violate this rule in cpus.c. Also rename the corresponding tcg functions
for the sake of consistency.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce qemu_cpu_kick_self to send SIG_IPI to the calling VCPU
context. First user will be kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, we only configure and process MCE-related SIGBUS events if
CONFIG_IOTHREAD is enabled. The groundwork is laid, we just need to
factor out the required handler registration and system configuration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Found by Stefan Hajnoczi: There is a race in kvm_cpu_exec between
checking for exit_request on vcpu entry and timer signals arriving
before KVM starts to catch them. Plug it by blocking both timer related
signals also on !CONFIG_IOTHREAD and process those via signalfd.
As this fix depends on real signalfd support (otherwise the timer
signals only kick the compat helper thread, and the main thread hangs),
we need to detect the invalid constellation and abort configure.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Will be required for SIGBUS handling. For obvious reasons, this will
remain a nop on Windows hosts.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move qemu_kvm_eat_signals around and call it also when the IO-thread is
not used. Do not yet process SIGBUS, will be armed in a separate step.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We do not use the timeout, so drop its logic. As we always poll our
signals, we do not need to drop the global lock. Removing those calls
allows some further simplifications. Also fix the error processing of
sigpending at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Block SIG_IPI, unblock it during KVM_RUN, just like in io-thread mode.
It's unused so far, but this infrastructure will be required for
self-IPIs and to process SIGBUS plus, in KVM mode, SIGIO and SIGALRM. As
Windows doesn't support signal services, we need to provide a stub for
the init function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move {tcg,kvm}_init_ipi and block_io_signals to avoid prototypes, rename
the former two to clarify that they deal with more than SIG_IPI. No
functional changes - except for the tiny fixup of strerror usage.
The forward declaration of sigbus_handler is just temporarily, it will
be moved in a succeeding patch. dummy_signal is moved into the !_WIN32
block as we will soon need it also for !CONFIG_IOTHREAD.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery
from cpus.c. This patch also fixes --disable-kvm build by providing the
missing kvm_on_sigbus_vcpu kvm-stub.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Do not ignore errors of kvm_init_vcpu, they are fatal.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Except for timer events, we currently do not leave the loop over all
VCPUs if an IO event was filed. That may cause unexpected IO latencies
under !CONFIG_IOTHREAD in SMP scenarios. Fix it by setting the global
exit_request which breaks the loop.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If some I/O operation ends up calling qemu_system_reset_request in VCPU
context, we record this and inform the io-thread, but we do not
terminate the VCPU loop. This can lead to fairly unexpected behavior if
the triggering reset operation is supposed to work synchronously.
Fix this for TCG (when run in deterministic I/O mode) by setting the
VCPU on stop and issuing a cpu_exit. KVM requires some more work on its
VCPU loop.
[ ported from qemu-kvm ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If we call qemu_cpu_kick more than once before the target was able to
process the signal, pthread_kill will fail, and qemu will abort. Prevent
this by avoiding the redundant signal.
This logic can be found in qemu-kvm as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The imbalance in the hold time of qemu_global_mutex only exists in TCG
mode. In contrast to TCG VCPUs, KVM drops the global lock during guest
execution. We already avoid touching the fairness lock from the
IO-thread in KVM mode, so also stop using it from the VCPU threads.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Flush all requests once we have stopped all
cpus and devices.
Make sure disk is in consistent state.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's
commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef
Author: Huang Ying <ying.huang@intel.com>
Date: Mon Sep 21 10:43:25 2009 +0800
MCE: Relay UCR MCE to guest
UCR (uncorrected recovery) MCE is supported in recent Intel CPUs,
where some hardware error such as some memory error can be reported
without PCC (processor context corrupted). To recover from such MCE,
the corresponding memory will be unmapped, and all processes accessing
the memory will be killed via SIGBUS.
For KVM, if QEMU/KVM is killed, all guest processes will be killed
too. So we relay SIGBUS from host OS to guest system via a UCR MCE
injection. Then guest OS can isolate corresponding memory and kill
necessary guest processes only. SIGBUS sent to main thread (not VCPU
threads) will be broadcast to all VCPU threads as UCR MCE.
aliguori: fix build
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Guest debugging is currently broken under CONFIG_IOTHREAD. The reason is
inconsistent or even lacking signaling the debug events from the source
VCPU to the main loop and the gdbstub.
This patch addresses the issue by pushing this signaling into a
CPUDebugExcpHandler: cpu_debug_handler is registered as first handler,
thus will be executed last after potential breakpoint emulation
handlers. It sets informs the gdbstub about the debug event source,
requests a debug exit of the main loop and stops the current VCPU. This
mechanism works both for TCG and KVM, with and without IO-thread.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These functions are also used for kvm under !CONFIG_IOTHREAD, having
'tcg' in their name is just misleading.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When checking for I/O events in the tcg CPU loop, make sure that we
call qemu_wait_io_event_common for all CPUs, not only the current one.
Otherwise pause_all_vcpus may lock up or run_on_cpu requests may starve.
Rename qemu_wait_io_event to qemu_tcg_wait_io_event at this chance and
purge its argument list as it has no use for it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If a cpu_exit request is pending, ensure that we leave the CPU loop
quickly. For this purpose, keep the global exit_request pending until
we are about to leave tcg_cpu_exec. Also, immediately break out of the
SMP loop if the request is set, do not run till the end of the chain.
This preserves the VCPU scheduling order in SMP mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All signals will thus be routed through the IO thread.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
run_on_cpu allows to execute work on a given CPUState context.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Store tcg loop exit request on a global variable, and transfer it to
per-CPUState exit_request after assignment of cpu_single_env.
This makes exit request signal from robust. Drop the timedlock hack.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
> Hello,
>
> d6f4ade (disentangle tcg and deadline calculation, 2010-03-10)
> introduces following regression(s):
>
> 100% cpu utilization when QEMU is invoked like:
> qemu -S -s ...
>
> ditto when gdb takes control over the session via gdb-stub
> (i.e. the breakpoint is hit or C-c is pressed inside gdb to
> interrupt the attached qemu instance)
The bug is that env->stopped is not really as comprehensive as it seems to
be (and cpu_has_work thinks); it is only valid with iothread basically,
and even then it is cleared by reset and it is not set when starting
qemu with -S.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
