local_err is used again in migration_bitmap_sync_precopy() after
precopy_notify(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-6-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
local_err is used again in secondary_vm_do_failover() after
replication_stop_all(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-5-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Migration from QEMU(v4.0) fails when using 3.1 or older machine
type. For example if one attempts to migrate
QEMU-2.12 started as
qemu-system-ppc64 -nodefaults -M pseries-2.12 -m 4096 -mem-path /tmp/
to current master, it will fail with
qemu-system-ppc64: Unknown ramblock "ppc_spapr.ram", cannot accept migration
qemu-system-ppc64: error while loading state for instance 0x0 of device 'ram'
qemu-system-ppc64: load of migration failed: Invalid argument
Caused by 900c0ba373 commit which switches main RAM allocation to
memory backends and the fact in 3.1 and older QEMU, backends used
full[***] QOM path as memory region name instead of backend's name.
That was changed after 3.1 to use prefix-less names by default
(fa0cb34d22) for new machine types.
*** effectively makes main RAM memory region names defined by
MachineClass::default_ram_id being altered with '/objects/' prefix
and therefore migration fails as old QEMU sends prefix-less
name while new QEMU expects name with prefix when using 3.1 and
older machine types.
Fix it by forcing implicit[1] memory backend to always use
prefix-less names for its memory region by setting
'x-use-canonical-path-for-ramblock-id'
property to false.
1) i.e. memory backend created by compat glue which maps
-m/-mem-path/-mem-prealloc/default RAM size into
appropriate backend type/options to match old CLI format.
Fixes: 900c0ba373
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Message-Id: <20200304172748.15338-1-imammedo@redhat.com>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On success, the fdopendir() call closes fd. Later on the error
path we try to close an already-closed fd. This can lead to
use-after-free. Fix by only closing the fd if the fdopendir()
call failed.
Cc: qemu-stable@nongnu.org
Fixes: b39bce121b (add dirp_map to hide lo_dirp pointers)
Reported-by: Coverity (CID 1421933 USE_AFTER_FREE)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200321120654.7985-1-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We're iterating the list, and then freeing the iteration pointer rather
than the list head.
Fixes: 0a9667ecdb ("hmp: Update info vnc")
Reported-by: Coverity (CID 1421932)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200323120822.51266-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When using max-bandwidth=~100Mb/s, this test fails on Travis-CI
s390x when configured with --disable-tcg:
$ make check-qtest
TEST check-qtest-s390x: tests/qtest/boot-serial-test
qemu-system-s390x: -accel tcg: invalid accelerator tcg
qemu-system-s390x: falling back to KVM
TEST check-qtest-s390x: tests/qtest/pxe-test
TEST check-qtest-s390x: tests/qtest/test-netfilter
TEST check-qtest-s390x: tests/qtest/test-filter-mirror
TEST check-qtest-s390x: tests/qtest/test-filter-redirector
TEST check-qtest-s390x: tests/qtest/drive_del-test
TEST check-qtest-s390x: tests/qtest/device-plug-test
TEST check-qtest-s390x: tests/qtest/virtio-ccw-test
TEST check-qtest-s390x: tests/qtest/cpu-plug-test
TEST check-qtest-s390x: tests/qtest/migration-test
**
ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
ERROR - Bail out! ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
make: *** [tests/Makefile.include:633: check-qtest-s390x] Error 1
Per David Gilbert, "it could just be the writing is slow on s390
and the migration thread fast; in which case the autocomplete
wouldn't be needed. Perhaps we just need to reduce the bandwidth
limit."
Tuning the threshold by reducing the initial bandwidth makes the
autoconverge test pass.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323184015.11565-1-philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This fix coverity issues 94417686:
1260 break;
CID 94417686: (MISSING_BREAK)
1261. unterminated_case: The case for value "MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD" is not terminated by a 'break' statement.
1261 case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
1262 p->has_throttle_trigger_threshold = true;
1263 visit_type_int(v, param, &p->throttle_trigger_threshold, &err);
1264 case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL:
Fixes: dc14a47076
Fixes: Coverity (CID 1421950)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200318071620.59748-1-pannengyuan@huawei.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Although qemu-ga has supported vsock since 2016 it was not documented on
the man page.
Also add the socket address representation to the qga --help output.
Fixes: 586ef5dee7
("qga: add vsock-listen method")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The QAPI struct GuestFileWhence has a comment about how we are
exploiting equivalent values between two different integer types
shared in a union. But C says behavior is undefined on assignments to
overlapping storage when the two types are not the same width, and
indeed, 'int64_t value' and 'enum QGASeek name' are very likely to be
different in width. Utilize a temporary variable to fix things.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 0b4b49387
Fixes: Coverity CID 1421990
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
guest-file-read command is currently implemented to read from a
file handle count number of bytes. when executed with a very large count number
qemu-ga crashes.
after some digging turns out that qemu-ga crashes after trying to allocate
a buffer large enough to save the data read in it, the buffer was allocated using
g_malloc0 which is not fail safe, and results a crash in case of failure.
g_malloc0 was replaced with g_try_malloc0() which returns NULL on failure,
A check was added for that case in order to prevent qemu-ga from crashing
and to send a response to the qemu-ga client accordingly.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1594054
Signed-off-by: Basil Salman <basil@daynix.com>
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch handles the case where VSS Provider is already registered,
where in such case qga uninstalls the provider and registers it again.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Installation might fail if we don't wait for the provider
unregisteration process to finish.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
- Use-after-free fix
- Fix for a memleak in an error path
- Preventative measures against other potential use-after-frees, and
against NULL deferences at runtime
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFFBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl55+r0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AypAH9ijjB8H/Vxp+A8DSIvMwXVDTEp2I+ACX
+riIwJIgvpz9Vblf9PPFjGfoArBMtQwb4F91aPy+eDaYq+teaekmPU4YXGMz+/dG
5JDKoAbJJr1gwMrSOIW3kQ/MKvoP0hiEFgwXvBvXJkXiANb2sCIvrXXKr/gFB0vt
M0/TERutiO7r+mkbfIVPKJahlaswguvoavqDak6kk5+OeOBpBoPwfPWlcjjEfGHb
epZiZN/i6fHLphfD+TEmTIzQQQI6csPUDA/ORbhodVZ2sQJ5kVfLVs+69RAwilC6
L3F1SnstnXcazUYlWOIicTJfKfC0BubM2Sofs7mfPFwN6I8A6PRTtw==
=KpHc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-03-24' into staging
Block patches for 5.0-rc0:
- Use-after-free fix
- Fix for a memleak in an error path
- Preventative measures against other potential use-after-frees, and
against NULL deferences at runtime
- iotest fixes
# gpg: Signature made Tue 24 Mar 2020 12:19:09 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-03-24:
iotests/026: Move v3-exclusive test to new file
iotests: Fix cleanup path in some tests
block/qcow2: zero data_file child after free
block: bdrv_set_backing_bs: fix use-after-free
block: Assert BlockDriver::format_name is not NULL
block: Avoid memleak on qcow2 image info failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
data_file does not work with v2, and we probably want 026 to keep
working for v2 images. Thus, open a new file for v3-exclusive error
path test cases.
Fixes: 81311255f2
(“iotests/026: Test EIO on allocation in a data-file”)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311140707.1243218-1-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some iotests leave behind some external data file when run for qcow2
with -o data_file. Fix that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200224171631.384314-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
data_file being NULL doesn't seem to be a correct state, but it's
better than dead pointer and simpler to debug.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200316060631.30052-3-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is a use-after-free possible: bdrv_unref_child() leaves
bs->backing freed but not NULL. bdrv_attach_child may produce nested
polling loop due to drain, than access of freed pointer is possible.
I've produced the following crash on 30 iotest with modified code. It
does not reproduce on master, but still seems possible:
#0 __strcmp_avx2 () at /lib64/libc.so.6
#1 bdrv_backing_overridden (bs=0x55c9d3cc2060) at block.c:6350
#2 bdrv_refresh_filename (bs=0x55c9d3cc2060) at block.c:6404
#3 bdrv_backing_attach (c=0x55c9d48e5520) at block.c:1063
#4 bdrv_replace_child_noperm
(child=child@entry=0x55c9d48e5520,
new_bs=new_bs@entry=0x55c9d3cc2060) at block.c:2290
#5 bdrv_replace_child
(child=child@entry=0x55c9d48e5520,
new_bs=new_bs@entry=0x55c9d3cc2060) at block.c:2320
#6 bdrv_root_attach_child
(child_bs=child_bs@entry=0x55c9d3cc2060,
child_name=child_name@entry=0x55c9d241d478 "backing",
child_role=child_role@entry=0x55c9d26ecee0 <child_backing>,
ctx=<optimized out>, perm=<optimized out>, shared_perm=21,
opaque=0x55c9d3c5a3d0, errp=0x7ffd117108e0) at block.c:2424
#7 bdrv_attach_child
(parent_bs=parent_bs@entry=0x55c9d3c5a3d0,
child_bs=child_bs@entry=0x55c9d3cc2060,
child_name=child_name@entry=0x55c9d241d478 "backing",
child_role=child_role@entry=0x55c9d26ecee0 <child_backing>,
errp=errp@entry=0x7ffd117108e0) at block.c:5876
#8 in bdrv_set_backing_hd
(bs=bs@entry=0x55c9d3c5a3d0,
backing_hd=backing_hd@entry=0x55c9d3cc2060,
errp=errp@entry=0x7ffd117108e0)
at block.c:2576
#9 stream_prepare (job=0x55c9d49d84a0) at block/stream.c:150
#10 job_prepare (job=0x55c9d49d84a0) at job.c:761
#11 job_txn_apply (txn=<optimized out>, fn=<optimized out>) at
job.c:145
#12 job_do_finalize (job=0x55c9d49d84a0) at job.c:778
#13 job_completed_txn_success (job=0x55c9d49d84a0) at job.c:832
#14 job_completed (job=0x55c9d49d84a0) at job.c:845
#15 job_completed (job=0x55c9d49d84a0) at job.c:836
#16 job_exit (opaque=0x55c9d49d84a0) at job.c:864
#17 aio_bh_call (bh=0x55c9d471a160) at util/async.c:117
#18 aio_bh_poll (ctx=ctx@entry=0x55c9d3c46720) at util/async.c:117
#19 aio_poll (ctx=ctx@entry=0x55c9d3c46720,
blocking=blocking@entry=true)
at util/aio-posix.c:728
#20 bdrv_parent_drained_begin_single (poll=true, c=0x55c9d3d558f0)
at block/io.c:121
#21 bdrv_parent_drained_begin_single (c=c@entry=0x55c9d3d558f0,
poll=poll@entry=true)
at block/io.c:114
#22 bdrv_replace_child_noperm
(child=child@entry=0x55c9d3d558f0,
new_bs=new_bs@entry=0x55c9d3d27300) at block.c:2258
#23 bdrv_replace_child
(child=child@entry=0x55c9d3d558f0,
new_bs=new_bs@entry=0x55c9d3d27300) at block.c:2320
#24 bdrv_root_attach_child
(child_bs=child_bs@entry=0x55c9d3d27300,
child_name=child_name@entry=0x55c9d241d478 "backing",
child_role=child_role@entry=0x55c9d26ecee0 <child_backing>,
ctx=<optimized out>, perm=<optimized out>, shared_perm=21,
opaque=0x55c9d3cc2060, errp=0x7ffd11710c60) at block.c:2424
#25 bdrv_attach_child
(parent_bs=parent_bs@entry=0x55c9d3cc2060,
child_bs=child_bs@entry=0x55c9d3d27300,
child_name=child_name@entry=0x55c9d241d478 "backing",
child_role=child_role@entry=0x55c9d26ecee0 <child_backing>,
errp=errp@entry=0x7ffd11710c60) at block.c:5876
#26 bdrv_set_backing_hd
(bs=bs@entry=0x55c9d3cc2060,
backing_hd=backing_hd@entry=0x55c9d3d27300,
errp=errp@entry=0x7ffd11710c60)
at block.c:2576
#27 stream_prepare (job=0x55c9d495ead0) at block/stream.c:150
...
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200316060631.30052-2-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_do_find_format() calls strcmp() using BlockDriver::format_name
as argument, which must not be NULL. Assert this field is not null
when we register a block driver in bdrv_register().
Reported-by: Mansour Ahmadi <ManSoSec@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200318222235.23856-1-philmd@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we fail to get bitmap info, we must not leak the encryption info.
Fixes: b8968c875f
Fixes: Coverity CID 1421894
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200320183620.1112123-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Here's a final pull request before the qemu-5.0 hard freeze.
We have an implementation of the POWER9 forms of the slbia
instruction, a small cleanup and a handful of assorted fixes.
-----BEGIN PGP SIGNATURE-----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=hGAI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200324' into staging
ppc patch queue for 2020-03-24
Here's a final pull request before the qemu-5.0 hard freeze.
We have an implementation of the POWER9 forms of the slbia
instruction, a small cleanup and a handful of assorted fixes.
# gpg: Signature made Tue 24 Mar 2020 05:12:30 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200324:
ppc/ppc405_boards: Remove unnecessary NULL check
hw/ppc: Take QEMU lock when calling ppc_dcr_read/write()
spapr: Fix memory leak in h_client_architecture_support()
target/ppc: don't byte swap ELFv2 signal handler
target/ppc: Fix ISA v3.0 (POWER9) slbia implementation
target/ppc: Fix slbia TLB invalidation gap
ppc/spapr: Set the effective address provided flag in mc error log.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This code is inside the "if (dinfo)" condition, so testing
again here whether it is NULL is unnecessary.
Fixes: dd59bcae7 (Don't size flash memory to match backing image)
Reported-by: Coverity (CID 1421917)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200320155740.5342-1-philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ppc_dcr_read() and ppc_dcr_write() functions call into callbacks
in device code, so we need to hold the QEMU iothread lock while
calling them. This is the case already for the callsites in
kvmppc_handle_dcr_read/write(), but we must also take the lock when
calling the helpers from TCG.
This fixes a bug where attempting to initialise the PPC405EP
SDRAM will cause an assertion when sdram_map_bcr() attempts
to remap memory regions.
Reported-by: Amit Lazar <abasarlaz@hotmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200322192258.14039-1-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the only error path that needs to free the previously allocated
ov1.
Reported-by: Coverity (CID 1421924)
Fixes: cbd0d7f363 "spapr: Fail CAS if option vector table cannot be parsed"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158481206205.336182.16106097429336044843.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Previously, the signal handler would be byte swapped if the target and
host CPU used different endianness. This would cause a SIGSEGV when
attempting to translate the opcode pointed to by the swapped address.
Thread 1 "qemu-ppc64" received signal SIGSEGV, Segmentation fault.
0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
351 __builtin_memcpy(&r, ptr, sizeof(r));
#0 0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
#1 0x00000000600a92fe in ldl_be_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:449
#2 0x00000000600c0790 in translator_ldl_swap at qemu/include/exec/translator.h:201
#3 0x000000006011c1ab in ppc_tr_translate_insn at qemu/target/ppc/translate.c:7856
#4 0x000000006005ae70 in translator_loop at qemu/accel/tcg/translator.c:102
The signal handler will be byte swapped as a result of the __get_user()
call in sigaction() if it is necessary, no additional swap is required.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200319133244.8818-1-vfazio@xes-inc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new ISA v3.0 slbia variants have not been implemented for TCG,
which can lead to crashing when a POWER9 machine boots Linux using
the hash MMU, for example ("disable_radix" kernel command line).
Add them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200319064439.1020571-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fixed compile error for USER_ONLY builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbia must invalidate TLBs even if it does not remove a valid SLB
entry, because slbmte can overwrite valid entries without removing
their TLBs.
As the architecture says, slbia invalidates all lookaside information,
not conditionally based on if it removed valid entries.
It does not seem possible for POWER8 or earlier Linux kernels to hit
this bug because it never changes its kernel SLB translations, and it
should always have valid entries if any accesses are made to userspace
regions. However other operating systems which may modify SLB entry 0
or do more fancy things with segments might be affected.
When POWER9 slbia support is added in the next patch, this becomes a
real problem because some new slbia variants don't invalidate all
non-zero entries.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200318044135.851716-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Per PAPR, it is expected to set effective address provided flag in
sub_err_type member of mc extended error log (i.e
rtas_event_log_v6_mc.sub_err_type). This somehow got missed in original
fwnmi-mce patch series. The current code just updates the effective address
but does not set the flag to indicate that it is available. Hence guest
fails to extract effective address from mce rtas log. This patch fixes
that.
Without this patch guest MCE logs fails print DAR value:
[ 11.933608] Disabling lock debugging due to kernel taint
[ 11.933773] MCE: CPU0: machine check (Severe) Host TLB Multihit [Recovered]
[ 11.933979] MCE: CPU0: NIP: [c000000000090b34] radix__flush_tlb_range_psize+0x194/0xf00
[ 11.934223] MCE: CPU0: Initiator CPU
[ 11.934341] MCE: CPU0: Unknown
After the change:
[ 22.454149] Disabling lock debugging due to kernel taint
[ 22.454316] MCE: CPU0: machine check (Severe) Host TLB Multihit DAR: deadbeefdeadbeef [Recovered]
[ 22.454605] MCE: CPU0: NIP: [c0000000003e5804] kmem_cache_alloc+0x84/0x330
[ 22.454820] MCE: CPU0: Initiator CPU
[ 22.454944] MCE: CPU0: Unknown
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Message-Id: <158451653844.22972.17999316676230071087.stgit@jupiter>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity reports a BAD_SHIFT with ctz32(imm5), with imm5 == 0.
This is an invalid encoding, but we diagnose that just below
by rejecting size > 3. Avoid the warning by sinking the
computation of index below the check.
Reported-by: Coverity (CID 1421965)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity raised a shed-load of errors cascading from inferring
that clz32(immh) might yield 32, from immh might be 0.
While immh cannot be 0 from encoding, it is not obvious even to
a human how we've checked that: via the filtering provided by
data_proc_simd[].
Reported-by: Coverity (CID 1421923, and more)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity rightly notes that ctz32(bas) on 0 will return 32,
which makes the len calculation a BAD_SHIFT.
A value of 0 in DBGWCR<n>_EL1.BAS is reserved. Simply move
the existing check we have for this case.
Reported-by: Coverity (CID 1421964)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent firmwares uses SPI DMA transfers in U-Boot to load the
different images (kernel, initrd, dtb) in the SoC DRAM. The AST2600
FMC model is missing the masks to be applied on the DMA registers
which resulted in incorrect values. Fix that and wire the SPI
controllers which have DMA support on the AST2600.
Fixes: bcaa8ddd08 ("aspeed/smc: Add AST2600 support")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20200320053923.20565-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The license is the 'GNU General Public License v2.0 or later',
not 'and':
This program is free software; you can redistribute it and/ori
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
Fix the license comment.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is mostly a fix for in-tree build.
It removes errors on .d directories:
grep: ./.gitlab-ci.d: Is a directory
grep: ./scripts/qemu-guest-agent/fsfreeze-hook.d: Is a directory
and improves performance by only checking <ARCH>-linux-user directories.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200323114116.163609-1-laurent@vivier.eu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In update_machine_ipl_properties() the array ascii_loadparm needs to
hold the 8 char loadparm and a string terminating zero char.
Let's increase the size of ascii_loadparm accordingly.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 0a01e082a4 ("s390/ipl: sync back loadparm")
Fixes: Coverity CID 1421966
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200320143101.41764-1-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Create a subdirectory for s390x under docs/system/ and move the
existing vfio-ap documentation there.
Create an initial document describing s390x system emulation.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200318103940.1169-1-cohuck@redhat.com>
When external event sources are disabled fdmon-io_uring falls back to
fdmon-poll. The ->need_wait() callback needs to watch for this so it
can return true when external event sources are disabled.
It is also necessary to call ->wait() when AioHandlers have changed
because io_uring is asynchronous and we must submit new sqes.
Both of these changes to ->need_wait() together fix tests/test-aio -p
/aio/external-client, which failed with:
test-aio: tests/test-aio.c:404: test_aio_external_client: Assertion `aio_poll(ctx, false)' failed.
Reported-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200319163559.117903-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
git shortlog
126c04acbabd7ad32c2b018fe10dfac2a3bc1210..55ab21c9a36852915b81f1b41ebaf3b6509dd8ba
5eraph (1):
Use specific outbound IP address
Akihiro Suda (8):
remove confusing comment that exists from ancient slirp
add slirp_new(SlirpConfig *, SlirpCb *, void *)
allow custom MTU
add disable_host_loopback (prohibit connections to 127.0.0.1)
add SlirpConfig version
emu: remove dead code
emu: disable by default
fix a typo in a comment
Anders Waldenborg (1):
state: fix loading of guestfwd state
Giuseppe Scrivano (1):
socket: avoid getpeername after shutdown(SHUT_WR)
Jindrich Novy (1):
Don't leak memory when reallocation fails.
Jordi Pujol Palomer (1):
fork_exec: correctly parse command lines that contain spaces
Marc-André Lureau (60):
Merge branch 'AkihiroSuda/libslirp-slirp4netns'
Merge branch 'fix-typo' into 'master'
meson: make it subproject friendly
Merge branch 'meson' into 'master'
misc: fix compilation warnings
Merge branch 'fix-shutdown-wr' into 'master'
sbuf: remove unused and undefined sbcopy() path
sbuf: check more strictly sbcopy() bounds with offset
sbuf: replace a comment with a runtime warning
Replace remaining malloc/free user with glib
tcp_attach() can no longer fail
state: can't ENOMEM
sbuf: use unsigned types
sbuf: simplify sbreserve()
dnssearch: use g_strv_length()
vmstate: silence scan-build warning
gitlab-ci: run scan-build
Merge branch 'mem-cleanups' into 'master'
libslirp.map: bind slirp_new to SLIRP_4.1 version
meson: fix libtool versioning
Release v4.1.0
Merge branch '4.1.0' into 'master'
CHANGELOG: start unreleased section
Merge branch 'add-unix' into 'master'
util: add G_SIZEOF_MEMBER() macro
Check bootp_filename is not going to be truncated
bootp: remove extra cast
bootp: replace simple snprintf() with strcpy()
tftp: clarify what is actually OACK m_len
tcp_emu: add more fixme/warnings comments
util: add slirp_fmt() helpers
dhcpv6: use slirp_fmt()
misc: use slirp_fmt0()
tftp: use slirp_fmt0()
tcp_ctl: use slirp_fmt()
tcp_emu: fix unsafe snprintf() usages
misc: improve error report
Use g_snprintf()
util: add gnuc format function attribute to slirp_fmt*
Merge branch 'aw-guestfwd-state' into 'master'
Merge branch 'slirp-fmt' into 'master'
socket: remove extra label and variable
socket: factor out sotranslate ipv4/ipv6 handling
socket: remove need for extra scope_id variable
socket: do not fallback on host loopback if get_dns_addr() failed
socket: do not fallback on loopback addr for addresses in our mask/prefix
Prepare for v4.2.0 release
Merge branch 'translate-fix' into 'master'
Merge branch 'release-v4.2.0' into 'master'
changelog: post-release
changelog: fix link
.gitlab-ci: add --werror, treat CI build warnings as errors
Revert "socket: remove need for extra scope_id variable"
Teach slirp_version_string() to return vcs version
Merge branch 'mingw-fix' into 'master'
Merge branch 'vcs-version' into 'master'
meson: bump required version to 0.49
build-sys: fix NetBSD build regression
Merge branch 'netbsd-fix' into 'master'
build-sys: make libslirp-version.h depend on Makefile
PanNengyuan (1):
libslirp: fix NULL pointer dereference in tcp_sockclosed
Philippe Mathieu-Daudé (1):
Add a git-publish configuration file
Prasad J Pandit (4):
slirp: ncsi: compute checksum for valid data length
slirp: use correct size while emulating IRC commands
slirp: use correct size while emulating commands
slirp: tftp: restrict relative path access
Renzo Davoli (2):
Add slirp_remove_guestfwd()
Add slirp_add_unix()
Samuel Thibault (14):
ip_reass: explain why we should not always update the q pointer
Merge branch 'comment' into 'master'
Merge branch 'no-emu' into 'master'
Fix bogus indent, no source change
ip_reass: Fix use after free
Merge branch 'reass2' into 'master'
Make host receive broadcast packets
arp: Allow 0.0.0.0 destination address
Merge branch 'warnings' into 'master'
Merge branch 'arp_0' into 'master'
Merge branch 'broadcast' into 'master'
tcp_emu: Fix oob access
Merge branch 'oob' into 'master'
Merge branch 'master' into 'master'
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Update the copyright date to 2020 for the copyright strings which are
user-facing and represent overall copyright info for all of QEMU.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200316112006.19107-1-peter.maydell@linaro.org
Waiting for only 1 second proved to be too short on a loaded system,
resulting in false positives when testing pull requests. Increase the
timeout a bit to make this less likely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-4-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With a QEMU bug, it can happen that the QEMU process doesn't react to a
'quit' QMP command. If we got an exception during previous QMP
communication (e.g. iotests Timeout expiring), we could also be in an
inconsistent state where after sending 'quit' we immediately read an old
response and close the socket even though the 'quit' command wasn't
processed yet. Both cases would lead to a hanging test.
Fix this by waiting for the QEMU process to exit after sending 'quit'
with a timeout, and if it doesn't happen within three seconds, send
SIGKILL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-3-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this, you can send SIGABRT to a hanging test case and you'll get a
Python stack trace so you know where it was hanging.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-2-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
