this patch changes the driver to uses 16 Byte CDBs for
READ/WRITE only if the target requires 64bit lba addressing.
On one hand this saves 6 bytes in each PDU on the other
hand it seems that 10 Byte CDBs seems to be much better
supported and tested as a recent issue I had with a
major storage supplier lined out.
For WRITESAME the logic is a bit more tricky as WRITESAME10
with UNMAP was added really late. Thus a fallback to WRITESAME16
is possible if it supports UNMAP and WRITESAME10 not.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.
This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:
iscsi: implement .bdrv_detach/attach_aio_context()
because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead
of 64 * 1024; because:
according to existing create_options, "cluster size" has default value =
QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be
stringized and set to .def_value_str. That is,
.def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE),
so the QED_DEFAULT_CLUSTER_SIZE could not be a expression.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vvfat shares create options of qcow driver. To avoid vvfat breaking when
qcow driver changes from QEMUOptionParameter to QemuOpts, let it able
to handle both cases.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
it will happen in the future that the callback of a libnfs call
directly invokes the callback. In this case we end up in a segfault
because the NFSRPC is gone when we the BH is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be a problem when running on big-endian machines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sheepdog driver doesn't need to read data_vdi_id[] when a live snapshot is
created.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Liu Yuan <namei.unix@gmail.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sheepdog driver should decide a write request is COW or not based on inode
object which is active when the write request is issued.
Example of wrong inode update path in the previous driver:
1. drier issues an ordinal write request to an existing object
2. user creates a snapshot of the VDI before the write request is completed
3. the respones for the request is RDONLY, because the VDI is already a snapshot
4. the driver reload an inode object of the new active VDI, then issues a write
request again
5. the second write request can be completed
6. driver decide the request is COW or not with the below conditional branch:
if (s->inode.data_vdi_id[idx] != s->inode.vdi_id) {
7. the ID of the written object and VID of the new active VDI is different, so
the driver updates data_vdi_id[idx] and writes inode object
8. the existing object cannot be seen by the new active VDI, it results object
leaking
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Liu Yuan <namei.unix@gmail.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk data-plane now uses the QEMU block layer for I/O. We do not
need raw_get_aio_fd() anymore. It was a layering violation anyway, so
let's get rid of it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVVmdkState->extents[].file. The block layer takes
care of ->file and ->backing_hd but doesn't know about our extents
BlockDriverStates, which is also part of the graph.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Use
bdrv_get_aio_context() to register fd handlers in the right AioContext
for this BlockDriverState.
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
For now this doesn't make much difference but will allow ssh to work in
IOThread instances in the future.
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_set_fd_handler() to aio_set_fd_handler() and qemu_aio_wait() to
aio_poll().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the socket fd handler from the old to the new
AioContext.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Drop the assumption that we're using the main AioContext for raw-win32.
Convert the aio-win32 code to support detach/attach and replace
qemu_aio_wait() with aio_poll().
The .bdrv_detach/attach_aio_context() interfaces move the aio-win32
event notifier from the old to the new AioContext.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each QEMUWin32AIOState event notifier is associated with an AioContext.
Since BlockDriverState instances can use different AioContexts we cannot
continue to use a global QEMUWin32AIOState.
Let each BDRVRawState have its own QEMUWin32AIOState and free it when
BDRVRawState is closed.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hot unplugging -drive aio=native,file=test.img,format=raw images leaves
the Linux AIO event notifier and struct qemu_laio_state allocated.
Luckily nothing will use the event notifier after the BlockDriverState
has been closed so the handler function is never called.
It's still worth fixing this resource leak.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux AIO.
Convert the Linux AIO event notifier to use aio_set_event_notifier().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the event notifier handler from the old to the new
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVQuorumState->bs[] children. The block layer takes
care of ->file and ->backing_hd but doesn't know about our ->bs[]
BlockDriverStates, which is also part of the graph.
Reviewed-by: Benoît Canet <benoit.canet@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we're
using the BlockDriverState's AioContext.
Implement .bdrv_detach/attach_aio_context() interfaces to move the
QED_F_NEED_CHECK timer from the old AioContext to the new one.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. The following
functions need to be converted:
* qemu_bh_new() -> aio_bh_new()
* qemu_aio_set_fd_handler() -> aio_set_fd_handler()
* qemu_aio_wait() -> aio_poll()
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the fd handler from the old to the new AioContext.
Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_set_fd_handler() calls to aio_set_fd_handler().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the socket fd handler from the old to the new
AioContext.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux
AIO. Convert qemu_aio_set_fd_handler() to aio_set_fd_handler() and
timer_new_ms() to aio_timer_new().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the fd and timer from the old to the new AioContext.
Cc: Peter Lieven <pl@kamp.de>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Drop the assumption that we're using the main AioContext. Use
aio_bh_new() instead of qemu_bh_new().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The curl block driver uses fd handlers, timers, and BHs. The fd
handlers and timers are managed on behalf of libcurl, which controls
them using callback functions that the block driver implements.
The simplest way to implement .bdrv_detach/attach_aio_context() is to
clean up libcurl in the old event loop and initialize it again in the
new event loop. We do not need to keep track of anything since there
are no pending requests when the AioContext is changed.
Also make sure to use aio_set_fd_handler() instead of
qemu_aio_set_fd_handler() and aio_bh_new() instead of qemu_bh_new() so
the current AioContext is passed in.
Cc: Alexander Graf <agraf@suse.de>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we
use the BlockDriverState's AioContext.
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVBlkverifyState->test_file. The block layer takes
care of ->file and ->backing_hd but doesn't know about our ->test_file
BlockDriverState, which is also part of the graph.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() so we use the BlockDriverState's
AioContext.
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In vmdk_create and vmdk_create_extent, initialize local_err before using
it, and don't leak it on error.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the MacOSX specific code in raw-posix.c we use the define
LONG_LONG_MAX. This is actually a non-standard pre-C99 define;
switch to using the standard LLONG_MAX instead.
This apparently fixes a compilation failure with certain
compiler/OS versions (though it is unclear which).
Reported-by: Peter Bartoli <peter@bartoli.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Has always been leaky. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Has always been leaky. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On error path. Introduced in commit a046433a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit a8d8ecb. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit 5a8a30d. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I figure the leak originated in bdrv_create2(), and was duplicated
into callers when commit 91a073a dropped that function. Looks like
the other places have since been fixed.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Open and create methods must set an error when they fail.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Completes the conversion to Error started in commit 015a103^..d5124c0,
except for a few bugs fixed in the next commit.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Completes the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Continues the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Completes the conversion to Error started in commit 015a103^..d5124c0.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libssh2_session_last_error() already returns the error code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Completes the conversion to Error started in commit 015a103^..d5124c0.
Cc: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This triggers if bs->drv becomes NULL in a concurrent request. This is
currently only the case when corruption prevention kicks in (i.e. at
most once per image, and after that it produces I/O errors).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/bonzini/scsi-next:
megasas: remove buildtime strings
block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=LnQj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Mon 19 May 2014 15:21:14 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
block: optimize zero writes with bdrv_write_zeroes
blockdev: add a function to parse enum ids from strings
util: add qemu_iovec_is_zero
qcow1: Stricter backing file length check
qcow1: Validate image size (CVE-2014-0223)
qcow1: Validate L2 table size (CVE-2014-0222)
qcow1: Check maximum cluster size
qcow1: Make padding in the header explicit
curl: Add usage documentation
curl: Add sslverify option
curl: Remove broken parsing of options from url
curl: Fix build when curl_multi_socket_action isn't available
qemu-iotests: Fix blkdebug in VM drive in 030
qemu-iotests: Fix core dump suppression in test 039
iotests: Add test for the JSON protocol
block: Allow JSON filenames
check-qdict: Add test for qdict_join()
qdict: Add qdict_join()
block: add test for vhdx image created by Disk2VHD
block: vhdx - account for identical header sections
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b03c380 introduced the function
iscsi_allocationmap_is_allocated(), however it is only used within a
code block that is conditionally compiled. This produces a warning
(error with -werror) of "defined but not used" for the the function, if
LIBISCSI_FEATURE_IOVECTOR is not defined.
This wraps iscsi_allocationmap_is_allocated() in the same conditional.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* remotes/bonzini/scsi-next:
[PATCH] block/iscsi: bump year in copyright notice
block/iscsi: allow cluster_size of 4K and greater
block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
block/iscsi: speed up read for unallocated sectors
block/iscsi: allow fall back to WRITE SAME without UNMAP
MAINTAINERS: mark megasas as maintained
megasas: Add MSI support
megasas: Enable MSI-X support
megasas: Implement LD_LIST_QUERY
scsi: Improve error messages more
scsi-disk: Improve error messager if can't get version number
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead
of silently truncating them to 1023.
Also don't rely on bdrv_pread() catching integer overflows that make len
negative, but use unsigned variables in the first place.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
A huge image size could cause s->l1_size to overflow. Make sure that
images never require a L1 table larger than what fits in s->l1_size.
This cannot only cause unbounded allocations, but also the allocation of
a too small L1 table, resulting in out-of-bounds array accesses (both
reads and writes).
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Too large L2 table sizes cause unbounded allocations. Images actually
created by qemu-img only have 512 byte or 4k L2 tables.
To keep things consistent with cluster sizes, allow ranges between 512
bytes and 64k (in fact, down to 1 entry = 8 bytes is technically
working, but L2 table sizes smaller than a cluster don't make a lot of
sense).
This also means that the number of bytes on the virtual disk that are
described by the same L2 table is limited to at most 8k * 64k or 2^29,
preventively avoiding any integer overflows.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Huge values for header.cluster_bits cause unbounded allocations (e.g.
for s->cluster_cache) and crash qemu this way. Less huge values may
survive those allocations, but can cause integer overflows later on.
The only cluster sizes that qemu can create are 4k (for standalone
images) and 512 (for images with backing files), so we can limit it
to 64k.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
We were relying on all compilers inserting the same padding in the
header struct that is used for the on-disk format. Let's not do that.
Mark the struct as packed and insert an explicit padding field for
compatibility.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This allows qemu to use images over https with a self-signed certificate. It
defaults to verifying the certificate.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer now supports a generic json syntax for passing option parameters
explicitly, making parsing of options from the url redundant.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VHDX spec v1.00 declares that "a header is current if it is the only
valid header or if it is valid and its SequenceNumber field is greater
than the other header’s SequenceNumber field. The parser must only use
data from the current header. If there is no current header, then the
VHDX file is corrupt."
However, the Disk2VHD tool from Microsoft creates a VHDX image file that
has 2 identical headers, including matching checksums and matching
sequence numbers. Likely, as a shortcut the tool is just writing the
header twice, for the active and inactive headers, during the image
creation. Technically, this should be considered a corrupt VHDX file
(at least per the 1.00 spec, and that is how we currently treat it).
But in order to accomodate images created with Disk2VHD, we can safely
create an exception for this case. If we find identical sequence
numbers, then we check the VHDXHeader-sized chunks of each 64KB header
sections (we won't rely just on the crc32c to indicate the headers are
the same). If they are identical, then we go ahead and use the first
one.
Reported-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current version of raw-posix always uses ioctl(FS_IOC_FIEMAP) if
FIEMAP is available; lseek with SEEK_HOLE/SEEK_DATA are not even
compiled in in this case. However, there may be implementations which
support the latter but not the former (e.g., NFSv4.2) as well as vice
versa.
To cover both cases, try FIEMAP first (as this will return -ENOTSUP if
not supported instead of returning a failsafe value (everything
allocated as a single extent)) and if that does not work, fall back to
SEEK_HOLE/SEEK_DATA.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The docs for glfs_init suggest that the function sets errno on every
failure. In fact it doesn't. As other functions such as
qemu_gluster_open() in the gluster block code report their errors based
on this fact we need to make sure that errno is set on each failure.
This fixes a crash of qemu-img/qemu when a gluster brick isn't
accessible from given host while the server serving the volume
description is.
Thread 1 (Thread 0x7ffff7fba740 (LWP 203880)):
#0 0x00007ffff77673f8 in glfs_lseek () from /usr/lib64/libgfapi.so.0
#1 0x0000555555574a68 in qemu_gluster_getlength ()
#2 0x0000555555565742 in refresh_total_sectors ()
#3 0x000055555556914f in bdrv_open_common ()
#4 0x000055555556e8e8 in bdrv_open ()
#5 0x000055555556f02f in bdrv_open_image ()
#6 0x000055555556e5f6 in bdrv_open ()
#7 0x00005555555c5775 in bdrv_new_open ()
#8 0x00005555555c5b91 in img_info ()
#9 0x00007ffff62c9c05 in __libc_start_main () from /lib64/libc.so.6
#10 0x00005555555648ad in _start ()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will return cluster_size and needs_compressed_writes to caller, if all the
extents have the same value (or there's only one extent). Otherwise return
-ENOTSUP.
cluster_size is only reported for sparse formats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a wrapper function to support "compressed" path in qemu-img convert.
Only support streamOptimized subformat case for now (num_extents == 1
and extent compression is true).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After the URL has been parsed make sure the server part is valid in
order to avoid a segmentation fault when calling nfs_mount().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the very first allocation has a length of 0, the free_cluster_index
is still 0 after the for loop, which means that subtracting one from it
will underflow and signal an invalid range of clusters by returning
-EFBIG. However, there is no such range, as its length is 0.
Fix this by preventing underflows on free_cluster_index during the
check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When receiving a new aio read request, we first look for an existing
transaction whose range will cover the read request by the time it
completes. However, we weren't checking that the existing transaction
was still active. If it had timed out, we were adding the request to a
transaction which would never complete and had already been cancelled,
resulting in a hang.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to the documentation, the correct way to ensure all
informationals have been returned by curl_multi_info_read is to loop
until it returns NULL.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
curl_multi_socket_all is a deprecated catch-all which checks for
activities on all open curl sockets. We have enough information from
the event loop to check only the sockets with activity. This change
removes use of curl_multi_socket_all in favour of
curl_multi_socket_action called with the relevant handle.
At the same time, it also ensures that the driver only checks for
completion of read operations after reading from a socket, rather than
both reading and writing.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove calls to curl_multi_do where the relevant handles are already
registered to the event loop.
Ensure that we kick off socket handling with CURL_SOCKET_TIMEOUT after
adding a new handle.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver will not start more than a fixed number of curl sessions.
If it needs more, it must wait for the completion of an existing one.
The driver was sleeping, which will prevent the main loop from
running, and therefore the event it's waiting on. It was also directly
calling its internal handler rather than waiting on existing
registered handlers to be called from the main loop.
This change causes it simply to wait for a period of time whilst
allowing the main loop to execute.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A curl write callback is supposed to return the number of bytes it
handled. curl_read_cb would have erroneously reported it had handled
all bytes in the event that the internal curl state was invalid.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This isn't any of the usually acceptable uses of goto.
Signed-off-by: Matthew Booth <mbooth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, if an error occurs during the part of vdi_create() which
actually writes the image, the function stores -errno, but continues
anyway.
Instead of trying to write data which (if it can be written at all) does
not make any sense without the operations before succeeding (e.g.,
writing the image header), just error out immediately.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, seek_to_sector() returns -1 both for errors and unallocated
sectors, resulting in silent errors. As 0 is an invalid offset of data
clusters (bitmap_offset is greater than 0 because s->data_offset is
greater than 0), just return 0 for unallocated sectors and -errno in
case of error. This should then be propagated by bochs_read(), the sole
user of seek_to_sector().
That function also has a case of "return -1 in case of error", which is
fixed by this patch as well.
bochs_read() is called by bochs_co_read() which passes the return value
through, therefore it is indeed correct for bochs_read() to return
-errno.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, new_l1_size is an int64_t, whereas min_size is a uint64_t.
Therefore, during the loop which adjusts new_l1_size until it equals or
exceeds min_size, new_l1_size might overflow and become negative. The
comparison in the loop condition however will take it as an unsigned
value (because min_size is unsigned) and therefore recognize it as
exceeding min_size. Therefore, the loop is left with a negative
new_l1_size, which is not correct. This could be fixed by making
new_l1_size uint64_t.
On the other hand, however, by doing this, the while loop may take
forever. If min_size is e.g. UINT64_MAX, it will take new_l1_size
probably multiple overflows to reach the exact same value (if it reaches
it at all). Then, right after the loop, new_l1_size will be recognized
as being too big anyway.
Both problems require a ridiculously high min_size value, which is very
unlikely to occur; but both problems are also simply avoided by checking
whether min_size is sane before calculating new_l1_size (which should
still be checked separately, though).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The call to bdrv_getlength() from qcow2_check_refcounts() may result in
an error. Check this and abort if necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.
This does not touch DEBUG output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
alloc_clusters_noref() stores the cluster index in a uint64_t. However,
offsets are often represented as int64_t (as for example the return
value of alloc_clusters_noref() itself demonstrates). Therefore, we
should make sure all offsets in the allocated range of clusters are
representable using int64_t without overflows.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_image_info_specific_dump() uses an error variable for
visit_type_ImageInfoSpecific, but ignores the result. As this function
is used here with an output visitor to transform the ImageInfoSpecific
object to a generic QDict, an error should actually be impossible. It is
however better to assert that this is indeed the case. This is done by
this patch using error_abort instead of an unused local Error variable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having unlink() calls in the generic block layer, where we
aren't even guarateed to have a file name, move them to those block
drivers that are actually used and that always have a filename. Gets us
rid of some #ifdefs as well.
The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open
flag so that it is inherited in the protocol layer and the raw-posix and
raw-win32 drivers can unlink the file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
discard_single_l2() should not implement its own version of
qcow2_get_cluster_type(), but rather rely on this already existing
function. By doing so, it will work for compressed clusters as well
(which it did not so far).
Also, rename "old_offset" to "old_l2_entry", as both are quite different
(and the value is indeed of the latter kind).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_info could fail. Add check before using the returned value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The direct return will skip releasing of all the resouces at
immediate_exit, don't miss that.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
depending on the target the opt_unmap_gran might be as low
as 4K. As we know use this also as a knob to activate the allocationmap
feature lower the barrier. The limit 4K (and not 512) is choosen
to avoid a potentially too big allocationmap.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch implements a cache that tracks if a page on the
iscsi target is allocated or not. The cache is implemented in
a way that it allows for false positives
(e.g. pretending a page is allocated, but it isn't), but
no false negatives.
The cached allocation info is then used to speed up the
read process for unallocated sectors by issueing a GET_LBA_STATUS
request for all sectors that are not yet known to be allocated.
If the read request is confirmed to fall into an unallocated
range we directly return zeroes and do not transfer the
data over the wire.
Tests have shown that a relatively small amount of GET_LBA_STATUS
requests happens a vServer boot time to fill the allocation cache
(all those blocks are not queried again).
Not to transfer all the data of unallocated sectors saves a lot
of time, bandwidth and storage I/O load during block jobs or storage
migration and it saves a lot of bandwidth as well for any big sequential
read of the whole disk (e.g. block copy or speed tests) if a significant
number of blocks is unallocated.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although bdrv_getlength() was just called above this, and checked for
error, it is better to just use the value we already get, and use
DIV_ROUND_UP.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if the iscsi driver receives a write zeroes request with
the BDRV_REQ_MAY_UNMAP flag set it fails with -ENOTSUP
if the iscsi target does not support WRITE SAME with
UNMAP. However, the BDRV_REQ_MAY_UNMAP is only a hint
and writing zeroes with WRITE SAME will still be
better than falling back to writing zeroes with WRITE16.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/qmp-unstable/queue/qmp:
monitor: fix qmp_getfd() fd leak in error case
HMP: support specifying dump format for dump-guest-memory
HMP: fix doc of dump-guest-memory
qmp: object-add: Validate class before creating object
monitor: Add device_add and device_del completion.
monitor: Add command_completion callback to mon_cmd_t.
monitor: Fix drive_del id argument type completion.
error: Remove some unused headers
qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
qerror.h: Remove QERR defines that are only used once
qerror.h: Remove unused error classes
error: Print error_report() to stderr if using qmp
monitor: Remove unused monitor_print_filename
error: Privatize error_print_loc
vnc: Remove default_mon usage
slirp: Remove default_mon usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.
Commit 24d3bd6 added a broken error path to iscsi_do_inquiry(): it
first calls error_setg(), then jumps to the preexisting error label,
where error_setg() gets called again, triggering an assertion failure.
Commit cbee81f fixed this by guarding the second error_setg() with an
error_is_set().
Replace this fix by a simpler and safer one: jump right behind the
second error_setg().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. Check perfectly suitable return
values instead when possible. errp can't be null there now, but this
is more robust and more obviously correct
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Commit 84d18f0 dumbed
it down to obvious, but a few more have crept in since, and
documentation was overlooked. Dumb these down, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
PRIu32 is the format string specifier for uint32_t, let's use it.
Variables ->block_size, ->n_blocks, and i are all uint32_t.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch converts fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
(error_setg() is part of error reporting API in include/qapi/error.h)
Signed-off-by: Aakriti Gupta <aakritty@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_getlength could fail, check the return value before using it.
Return NULL and set errno if it fails. Callers are updated to handle
the error case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old check was off by a factor of 512 and didn't consider cases where
we don't get an exact division. This could lead to an out-of-bounds
array access in seek_to_sector().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When qcow2_get_cluster_offset() sees a zero cluster in a version 2
image, it (rightfully) returns an error. But in doing so it shouldn't
leak an L2 table cache reference.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This eliminates the possible assertion failure in error_setg().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max WRITE SAME length is also used when the UNMAP bit is zero, so it
should be queried even if LBPWS=0. Same for the optimal transfer
length.
However, the write_zeroes_alignment only matters for UNMAP=1 so we
still restrict it to LBPWS=1.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non-block SCSI devices do not support flushing, but we may still send
them requests via bdrv_flush_all. Just ignore them.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets may return "invalid field" as the ASCQ from WRITE SAME
if they support the command only without the UNMAP field. Recognize
that, and return ENOTSUP just like for "invalid operation code".
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.
Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables. Each QCowL2Meta describes one L2 table update. This is a
rare case in preallocate() but can happen.
This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas. Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies. preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids a possible division by zero.
Convert s->tracks to unsigned as well because it feels better than
surviving just because the results of calculations with s->tracks are
converted to unsigned anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.
The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Even with a limit of 64k snapshots, each snapshot could have a filename
and an ID with up to 64k, which would still lead to pretty large
allocations, which could potentially lead to qemu aborting. Limit the
total size of the snapshot table to an average of 1k per entry when
the limit of 64k snapshots is fully used. This should be plenty for any
reasonable user.
This also fixes potential integer overflows of s->snapshot_size.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the L1 table to loaded for an internal snapshot, the code allocated
only enough memory to hold the currently active L1 table. If the
snapshot's L1 table is actually larger than the current one, this leads
to a buffer overflow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bs->total_sectors is not the highest possible sector number that could
be involved in a copy on write operation: VM state is after the end of
the virtual disk. This resulted in wrong values for the number of
sectors to be copied (n).
The code that checks for the end of the image isn't required any more
because the code hasn't been calling the block layer's bdrv_read() for a
long time; instead, it directly calls qcow2_readv(), which doesn't error
out on VM state sector numbers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both compressed and uncompressed I/O is buffered. dmg_open() calculates
the maximum buffer size needed from the metadata in the image file.
There is currently a buffer overflow since ->lengths[] is accounted
against the maximum compressed buffer size but actually uses the
uncompressed buffer:
switch (s->types[chunk]) {
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
We must account against the maximum uncompressed buffer size for type=1
chunks.
This patch fixes the maximum buffer size calculation to take into
account the chunk type. It is critical that we update the correct
maximum since there are two buffers ->compressed_chunk and
->uncompressed_chunk.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The DMG metadata is stored as uint64_t, so use the same type for
sector_num. int was a particularly poor choice since it is only 32-bit
and would truncate large values.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Chunk length and sectorcount are used for decompression buffers as well
as the bdrv_pread() count argument. Ensure that they have reasonable
values so neither memory allocation nor conversion from uint64_t to int
will cause problems.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the right types instead of signed int:
size_t new_size;
This is a byte count for g_realloc() that is calculated from uint32_t
and size_t values.
uint32_t chunk_count;
Use the same type as s->n_chunks, which is used together with
chunk_count.
This patch is a cleanup and does not fix bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not necessary to check errno for EINTR and the block layer does
not produce short reads. Therefore we can drop the loop that attempts
to read a compressed chunk.
The loop is buggy because it incorrectly adds the transferred bytes
twice:
do {
ret = bdrv_pread(...);
i += ret;
} while (ret >= 0 && ret + i < s->lengths[chunk]);
Luckily we can drop the loop completely and perform a single
bdrv_pread().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a terminator is reached the base for offsets and sectors is stored.
The following records that are processed will use this base value.
If the first record we encounter is a terminator, then calculating the
base values would result in out-of-bounds array accesses. Don't do
that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up the mix of tabs and spaces, as well as the coding style
violations in block/dmg.c. There are no semantic changes since this
patch simply reformats the code.
This patch is necessary before we can make meaningful changes to this
file, due to the inconsistent formatting and confusing indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The size in bytes is assigned to an int later, so check that instead of
the number of entries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to avoid integer overflows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This ensures that the checks catch all invalid cluster indexes
instead of returning the refcount of a wrong cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.
Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
curl_read_cb is callback function for libcurl when data arrives. The
data size passed in here is not guaranteed to be within the range of
request we submitted, so we may overflow the guest IO buffer. Check the
real size we have before memcpy to buffer to avoid overflow.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Other variables (e.g. sectors_per_block) are calculated using these
variables, and if not range-checked illegal values could be obtained
causing infinite loops and other potential issues when calculating
BAT entries.
The 1.00 VHDX spec requires BlockSize to be min 1MB, max 256MB.
LogicalSectorSize is required to be either 512 or 4096 bytes.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The maximum blocks_in_image is 0xffffffff / 4, which also limits the
maximum disk_size for a VDI image to 1024TB. Note that this is the maximum
size that QEMU will currently support with this driver, not necessarily the
maximum size allowed by the image format.
This also fixes an incorrect error message, a bug introduced by commit
5b7aa9b56d (Reported by Stefan Weil)
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes some cases of division by zero crashes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds checks to make sure that max_table_entries and block_size
are in sane ranges. Memory is allocated based on max_table_entries,
and block_size is used to calculate indices into that allocated
memory, so if these values are incorrect that can lead to potential
unbounded memory allocation, or invalid memory accesses.
Also, the allocation of the pagetable is changed from g_malloc0()
to qemu_blockalign().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
32 bit truncation could let us access the wrong offset in the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes two possible division by zero crashes: In bochs_open() and in
seek_to_sector().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should neither become negative nor allow unbounded memory
allocations. This fixes aborts in g_malloc() and an s->catalog_bitmap
buffer overflow on big endian hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gets us rid of integer overflows resulting in negative sizes which
aren't correctly checked.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an on-disk structure, so offsets must be accurate.
Before this patch, sizeof(bochs) != sizeof(header_v1), which makes the
memcpy() between both invalid. We're lucky enough that the destination
buffer happened to be the larger one, and the memcpy size to be taken
from the smaller one, so we didn't get a buffer overflow in practice.
This patch unifies the both structures, eliminating the need to do a
memcpy in the first place. The common fields are extracted to the top
level of the struct and the actually differing part gets a union of the
two versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cloop stores the number of compressed blocks in the n_blocks header
field. The file actually contains n_blocks + 1 offsets, where the extra
offset is the end-of-file offset.
The following line in cloop_read_block() results in an out-of-bounds
offsets[] access:
uint32_t bytes = s->offsets[block_num + 1] - s->offsets[block_num];
This patch allocates and loads the extra offset so that
cloop_read_block() works correctly when the last block is accessed.
Notice that we must free s->offsets[] unconditionally now since there is
always an end-of-file offset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The offsets[] array allows efficient seeking and tells us the maximum
compressed data size. If the offsets are bogus the maximum compressed
data size will be unrealistic.
This could cause g_malloc() to abort and bogus offsets mean the image is
broken anyway. Therefore we should refuse such images.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit offsets_size to 512 MB so that:
1. g_malloc() does not abort due to an unreasonable size argument.
2. offsets_size does not overflow the bdrv_pread() int size argument.
This limit imposes a maximum image size of 16 TB at 256 KB block size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following integer overflow in offsets_size can lead to out-of-bounds
memory stores when n_blocks has a huge value:
uint32_t n_blocks, offsets_size;
[...]
ret = bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4);
[...]
s->n_blocks = be32_to_cpu(s->n_blocks);
/* read offsets */
offsets_size = s->n_blocks * sizeof(uint64_t);
s->offsets = g_malloc(offsets_size);
[...]
for(i=0;i<s->n_blocks;i++) {
s->offsets[i] = be64_to_cpu(s->offsets[i]);
offsets_size can be smaller than n_blocks due to integer overflow.
Therefore s->offsets[] is too small when the for loop byteswaps offsets.
This patch refuses to open files if offsets_size would overflow.
Note that changing the type of offsets_size is not a fix since 32-bit
hosts still only have 32-bit size_t.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Avoid unbounded s->uncompressed_block memory allocation by checking that
the block_size header field has a reasonable value. Also enforce the
assumption that the value is a non-zero multiple of 512.
These constraints conform to cloop 2.639's code so we accept existing
image files.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The mirror blockjob coroutine rate-limits itself by sleeping. The
coroutine also performs I/O asynchronously so it's important that the
aio callback doesn't wake the coroutine early as that breaks
rate-limiting.
Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling delay calculation was using an inaccurate sector count to
calculate the time to sleep. This broke rate-limiting for the block
mirror job.
Move the delay calculation into mirror_iteration() where we know how
many sectors were transferred. This lets us calculate an accurate delay
time.
Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if an NFS operation fails we should report what libnfs knows
about the failure. It is likely more than just an error code.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_alloc_clusters() fails, new_offset and ret will both be
negative after the fail label, thus passing the first if condition and
subsequently resulting in a call of qcow2_free_clusters() with an
invalid (negative) offset parameter. Fix this by introducing a new label
"fail_free_cluster" which is only invoked if new_offset is indeed
pointing to a newly allocated cluster that should be cleaned up by
freeing it.
While we're at it, clean up the whole fail path. qcow2_cache_put()
should (and actually can) never fail, hence the return value can safely
be ignored (aside from asserting that it indeed did not fail).
Furthermore, there is no reason to give QCOW2_DISCARD_ALWAYS to
qcow2_free_clusters(), a mere QCOW2_DISCARD_OTHER will suffice.
Ultimately, rename the "fail" label to "done", as it is invoked both on
failure and success.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Contrary to the comment describing this function's behavior, it does not
return 0 on success, but rather the offset of the newly allocated
cluster. This patch adjusts the comment accordingly to reflect the
actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
nbd_receive_reply() is called by the event loop whenever data is
available or the socket has been closed by the remote side.
This patch closes the socket when an error occurs to prevent the
nbd_receive_reply() handler from being called indefinitely after the
connection has failed.
Note that we were already correctly returning EIO for pending requests
but leaving the nbd_receive_reply() handler registered resulted in high
CPU consumption and a flood of error messages.
Reuse nbd_teardown_connection() to close the socket.
Reported-by: Zhifeng Cai <bluewindow@h3c.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On 32-bit hosts, some compilers will warn on too large integer constants
for constants that are 64-bit in length. Explicitly put a 'ULL' suffix
on those defines.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_device" protocol driver should strip the "host_device:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The hdev_create() implementation in block/raw-posix.c is used by the
"host_device", "host_cdrom" and "host_floppy" protocol block drivers
together. Thus, any of the associated prefixes may occur and exactly one
should should be stripped, if it does (thus,
"host_device:host_cdrom:/dev/cdrom" is not shortened to "/dev/cdrom").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_cdrom" protocol drivers should strip the "host_cdrom:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_floppy" protocol driver should strip the "host_floppy:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
