Allow the IPMI interface to request a forced power off.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a way for IPMI devices to register their firmware information
with the IPMI subsystem so that various firmware entities can pull
that information later for adding to firmware tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides the simulation of the KCS hardware interface.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket). The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The field is not used for anything.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
The pxb-pcie is the counterpart of pxb for PCI express machines.
The new device re-uses the pxb code, but appears to the guests
as a different device. The pxb-pcie device does not have an internal
pci-pci bridge and exposes a PCIe root bus instead of a PCI one.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A generic PCI Bus Expander doesn't necessary have a built-in PCI bridge.
Int this case the ACPI will include IO/MEM ranges per device. Try to merge
adjacent resources to reduce the ACPI tables length.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The property is read-only and not used for anything.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
enforce_aligned_dimm never changes after the machine is
initialized, so it can be simply set in PCMachineClass like all
the other compat fields.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we don't need code in pc_compat_*() functions to set the legacy
acpi_data_size value.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This deletes a block of code that raised a command index error if a
command returned response data, but the guest did not set the
appropriate bits in the response register to handle such a response. I
cannot find any documentation that suggests the controller should
behave in this way, the error code doesn't make sense (command index
error is defined for the case where the index in a response does not
match that of the issued command), and in at least one case (CMD23
issued by UEFI on Raspberry Pi 2), actual hardware does not do this.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This check was conditionalising SD card operation on the card being
powered by the SDHCI host controller. It is however possible
(particularly in embedded systems) for the power control of the SD card
to be managed outside of SDHCI. This can be as trivial as hard-wiring
the SD slot VCC to a constant power-rail.
This means the guest SDHCI can validly opt-out of the SDHCI power
control feature while still using the card. So delete this check to
allow operation of the card with SDHCI power control.
This is needed for at least Xilinx Zynq and Raspberry Pi, and
also makes Freescale i.MX25 work for me. The digilent Zybo board
has a public schematic which shows SD VCC hardwiring:
http://digilentinc.com/Data/Products/ZYBO/ZYBO_sch_VB.3.pdf
bottom of page 3.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1450738069-18664-2-git-send-email-Andrew.Baumann@microsoft.com
[AB: Add Pi to list of devices fixed in commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Request merging must not result in a huge request that exceeds the
maximum number of iovec elements. Use BlockLimits.max_iov instead of
hardcoding IOV_MAX.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
1. avoid possible superflous checking
2. make code more robustness
["make code more robustness" refers to avoiding integer
underflows/overflows.
--Stefan]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1447207166-12612-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function. If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.
Fix it by removing the double access to src->nr_segments.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This was found by code inspection. If the request is cancelled twice,
the notifier is never called on the second cancellation request,
and hence for example a TMF might never finish.
All the calls in scsi_req_cancel_async are idempotent, so the change
is safe.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-2-git-send-email-pbonzini@redhat.com>
This avoids calls to aio_poll without having acquired the context first.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-1-git-send-email-pbonzini@redhat.com>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the previous patch which changed pvscsi to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie'.
Its default value is false, exposing pvscsi as a pcie device.
Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-7-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report the 'express endpoint' capability if on a PCIE bus.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-6-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a class type for pvscsi, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.
No semantic change.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-5-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the previous patches, which introduced various changes in
pvscsi's pci configuration space (device subsystem id and revision, msi
offset), this patch introduces a boolean property
'x-old-pci-configuration' to pvscsi.
Its default value is false, exposing the above changes in the pci config
space.
Setting 'x-old-pci-configuration' to 'on' preserves the old behavior,
which allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-4-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place device reported MSI capability at the same offset as placed by
the VMware virtual hardware - at offset 0x7c.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-3-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be VMware PVSCSI SCSI Controller, rev 02.
As reported by the VMware virtual hardware.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-2-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to prepare for CCM code refactoring.
This is just a bit of function and enum values renaming.
We also remove some useless intermediate variables.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.
We change the CCMR reg reset value to match linux expected config.
This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.
With this change the "sleep 60" command on linux is time accurate
with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a gpio-keys node. This is used for Poweroff for the systems which
use DT not ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-11-git-send-email-zhaoshenglong@huawei.com
[PMM: use "standard-headers/linux/input.h" rather than <linux/input.h>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently mach-virt model doesn't support powerdown request. Guest VM
doesn't react to system_powerdown from monitor console (or QMP) because
there is no communication mechanism for such requests. This patch registers
GPIO Pin 3 with powerdown notification. So guest VM can receive notification
when such powerdown request is triggered.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here GPIO pin 3 is used for Power Button, add _E03 in ACPI DSDT table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GPIO controller in ACPI DSDT table. It can be used for gpio event.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-5-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASL Interrupt() macro translates to Extended Interrupt Descriptor
which supports variable number of IRQs. It will be used for
conversion of ASL code for pc/q35 machines that use it for
returning several IRQs in _PSR object.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add serialized method support so that explicit Mutex can be
avoided
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a first baby step towards removing widespread inclusion of
cpu.h and compiling more devices once (so that arm, aarch64 and
in the future target-multi can share the object files).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: changed __FUNCTION__ to __func__ since we're touching
these lines of code anyway]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Behaviour of emulated devices should not depend on the endianness
of the CPU, so avoid using the endian-dependent load and store
functions in the PXA2xx and OMAP display devices. These devices
are little endian when they do DMA access.
(Since ARM softmmu is always compiled as little endian, this means
that the endian-dependent load and store functions are always little
endian, so this commit makes no functionally visible change.)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The i.MX6 GPIO device supports 2 interrupts instead of one.
* 1 for the lower 16 GPIOs.
* 1 for the upper 16 GPIOs.
i.MX31 and i.MX25 only support 1 interrupt for the 32 GPIOs.
So we add a property to turn the behavior on when required.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1447497668-1603-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X75u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-12-17' into staging
QAPI patches for 2015-12-17
# gpg: Signature made Thu 17 Dec 2015 07:33:41 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-12-17: (40 commits)
qapi: Detect base class loops
qapi: Move duplicate collision checks to schema check()
qapi: Enforce (or whitelist) case conventions on qapi members
qapi: Track enum values by QAPISchemaMember, not string
qapi: Prepare new QAPISchemaMember base class
qapi: Shorter visits of optional fields
qapi: Simplify visits of optional fields
qapi: Fix alternates that accept 'number' but not 'int'
qapi: Inline _make_implicit_tag()
qapi-types: Drop unnedeed ._fwdefn
qapi: Simplify visiting of alternate types
qapi: Convert QType into QAPI built-in enum type
qobject: Rename qtype_code to QType
qobject: Simplify QObject
qapi: Change munging of CamelCase enum values
qapi: Add alias for ErrorClass
cpu: Convert CpuInfo into flat union
qapi: Remove obsolete tests for MAX collision
qapi: Don't let implicit enum MAX member collide
qapi: Tighten the regex on valid names
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
IOPort read access is limited to one byte at a time by
fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely
ignore its size argument (which will always be 1), and simply
call its fw_cfg_read() helper function once, returning 8 bits
via the least significant byte of a 64-bit return value.
This patch replaces fw_cfg_comb_read() with the generic method
fw_cfg_data_read(), and removes the unused fw_cfg_read() helper.
When called with size = 1, fw_cfg_data_read() acts exactly like
fw_cfg_read(), performing the same set of sanity checks, and
executing the while loop at most once (subject to the current
read offset being within range).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-7-git-send-email-somlo@cmu.edu
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.
To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.
This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When calculating a pointer to the currently selected fw_cfg item, the
following is used:
FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.
This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.
This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, the fw_cfg internal API specifies that if an item was set up
with a read callback, the callback must be run each time a byte is read
from the item. This behavior is both wasteful (most items do not have a
read callback set), and impractical for bulk transfers (e.g., DMA read).
At the time of this writing, the only items configured with a callback
are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They
all share the same callback functions: virt_acpi_build_update() on ARM
(in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in
hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return
without doing anything at all after the first time they are invoked with
a given build_state; since build_state is also shared across all three
items mentioned above, the callback only ever runs *once*, the first
time either of the listed items is read).
This patch amends the specification for fw_cfg_add_file_callback() to
state that any available read callback will only be invoked once each
time the item is selected. This change has no practical effect on the
current behavior of QEMU, and it enables us to significantly optimize
the behavior of fw_cfg reads during guest firmware setup, eliminating
a large amount of redundant callback checks and invocations.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction. That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.
This is CVE-2015-8558.
Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the host polls for events, we check our
events qlist and send one event at a time. Also, note
that the event packet needs to be sent in one go, so
I increased the max packet size to 64.
Tested with a linux guest.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-5-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On a reset, call usb_mtp_object_free on all objects and their children
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Xen toolstack uses "vhd" to specify a disk in VHD format, however
the name of the driver in QEMU is "vpc". Replace "vhd" with "vpc", so
that QEMU can find the right driver to use for it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Since commit 4652f1640e "virtio-9p: add savevm
handlers", if the user hot-unplugs a quiescent 9p device and live
migrates, the source QEMU crashes before migration completetion...
This happens because virtio-9p devices have a realize handler which
calls virtio_init() and register_savevm(). Both calls store pointers
to the device internals, that get dereferenced during migration even
if the device got unplugged.
This patch simply adds an unrealize handler to perform minimal
cleanup and avoid the crash. Hot unplug of non-quiescent 9p devices
is still not supported in QEMU, and not supported by linux guests
either.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20151208155457.27775.69441.stgit@bahia.huguette.org
[PMM: rewrapped long lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce yet another mask for them, so that the generic routine can
handle them, at once rendering xen_pt_pmcsr_reg_write() superfluous.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The way the generic infrastructure works the intention of not allowing
unaligned accesses can't be achieved by simply setting .unaligned to
false. The benefit is that we can now replace the conditionals in
{get,set}_entry_value() by assert()-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The remaining log message in pci_msix_write() is wrong, as there guest
behavior may only appear to be wrong: For one, the old logic didn't
take the mask-all bit into account. And then this shouldn't depend on
host device state (i.e. the host may have masked the entry without the
guest having done so). Plus these writes shouldn't be dropped even when
an entry gets unmasked. Instead, if they can't be made take effect
right away, they should take effect on the next unmasking or enabling
operation - the specification explicitly describes such caching
behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
blk_attach_dev() fails here only when we're working for device
"sdhci-pci" (which already attached the backend), and then we don't
want to attach a second time. If we ever create another failure mode,
we're setting up ourselves to using the same backend from multiple
frontends, which is likely to end in tears. Can't clean this up this
close to the release, so mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two. The properties
that really belong to the card would then have to somehow pass-through
to the card's properties. To avoid that complication, either mark
them experimental or drop them.
Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller. Property "drive" belongs to the card;
rename it to "x-drive". Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The official way of enabling dataplane is through the "iothread"
property that references an iothread object created by "-object
iothread". Since the old "x-data-plane=on" way now even crashes, it's
probably easier to just drop it:
$ qemu-system-x86_64 -drive file=null-co://,id=d0,if=none \
-device virtio-blk-pci,drive=d0,x-data-plane=on
ERROR:/home/fam/work/qemu/qom/object.c:1515:
object_get_canonical_path_component: assertion failed: (obj->parent != NULL)
Aborted
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1449485967-19240-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJWZZJPAAoJEO8Ells5jWIRmp0H/26aFXVEgZykkUVNbqq05r7w
AI7podQlFOAESJHqZtR8FMaH8TAZ5GhphP4pn0PsWp54VjwcYZbdoME+dhZ4Elyc
WDanRHIweLv/zVg6+M8oHhw5GMaxtFLoLWrf0oanbUW9IZZmmM3COz/Y31hSVrR2
EzEJi1VZZhpMj3ibeOJns4MrugYrne8MtOdvusE/Uw2rJBTiStnWw1eTk8RmkNcg
5un1mQZxFU2AcNzmWdmWJmjY0rCnR3HhtTdZOwjM6uZGIJ9hbsItGzqiGadBfozI
fUtIa2HZahioe0VIzoB0snXnAuhV1jA0Uy18i04dPvgQOmiVSRjQNE2/lwQflyE=
=Pad3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
lan9118: log and ignore access to invalid registers, rather than aborting
lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
vmxnet3: silence warning
pcnet: fix rx buffer overflow(CVE-2015-7512)
net: pcnet: add check to validate receive data size(CVE-2015-7504)
e1000: fix hang of win2k12 shutdown with flood ping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vmxnet3 always produces a warning under qtest.
This is not a user error, don't warn.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.
Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.
There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.
On the other hand according to the initial research in
commit e9845f0985
Author: Vincenzo Maffione <v.maffione@gmail.com>
Date: Fri Aug 2 18:30:52 2013 +0200
e1000: add interrupt mitigation support
...
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
this should also boost performance a bit.
See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The GT64xxx's internal registers can be placed above the first 4 GiB
in the address space, but not above the first 64 GiB. Correctly cast
the register to a 64-bit integer, and mask away bits above bit 35.
Datasheet at http://pdf.datasheetarchive.com/datasheetsmain/Datasheets-33/DSA-655889.pdf
(bug reported by Coverity).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the case of a 4-byte length, shifting a value by 24 may cause
an unintended sign extension when converting from int to size_t.
Use a uint32_t variable instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
prop_get_fdt() misuses the visitor API: when fdt is null, it doesn't
visit anything. object_property_get_qobject() happily
object_property_get_qobject(). Amazingly, the latter survives the
misuse. Turns out we've papered over it long before prop_get_fdt()
existed, in commit 1d10b44.
However, commit 6c2f9a1 changed how we paper over it, and as a side
effect changed qom-get's value from {} to null. Change it right back
by fixing the visitor misuse.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It should only be created via spapr_dr_connector_new(). Attempting to
create it with -device crashes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since prop_get_fdt() is only used with QmpOutputVisitor, errors
shouldn't actually happen, so this is only a latent bug.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.
This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.
As a result, device may crash upon attempt to write to the PCIE config
space.
Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.
This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
If you run a qemu advertising VERSION_1 with an old kernel where
vhost did not yet support VERSION_1, you'll end up with a device
that is {modern pci|ccw revision 1} but does not advertise VERSION_1.
This is not a sensible configuration and is rejected by the Linux
guest drivers.
To fix this, add a ->post_plugged() callback invoked after features
have been queried that can handle the VERSION_1 bit being withdrawn
and change ccw to fall back to revision 0 if VERSION_1 is gone.
Note that pci is _not_ fixed; we'll need to rethink the approach
for the next release but at least for pci it's not a regression.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- The bios should be built for the first z machine, so that newer
instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=xIKz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20151201' into staging
Last round of s390x fixes for 2.5:
- The bios should be built for the first z machine, so that newer
instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.
# gpg: Signature made Tue 01 Dec 2015 08:59:42 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20151201:
s390x/pci: fix up IOMMU size
s390x: no deprecation warning while testing
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: build for z900
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Present code uses @size==UINT64_MAX to initialize IOMMU. It infers that it
can map any 64-bit IOVA whatsoever. But in fact, the largest DMA range for
each PCI Device on s390x is from ZPCI_SDMA_ADDR to ZPCI_EDMA_ADDR. The largest
value is returned from hardware, which is to indicate the largest range
hardware can support. But the real IOMMU size for specific PCI Device is
obtained once qemu intercepts mpcifc instruction that guest is requesting a
DMA range for that PCI Device. Therefore, before intercepting mpcifc instruction,
qemu cannot be aware of the size of IOMMU region that guest will use.
Moreover, iommu replay during device initialization for the whole region in
4k steps takes a very long time.
In conclusion, this patch intializes IOMMU region for each PCI Device when
intercept mpcifc instruction which is to register DMA range for the PCI Device.
And then, destroy IOMMU region when guest wants to deregister IOAT.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
'make check' tries to start all available machines; the deprecation
message for the s390-virtio machine is both useless and annoying
there. Silence it while testing.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlZcWOcACgkQAvw66wEB28J96QCgoMJRcWSdhboxEXPasd9Pc4UK
N3EAn2L/vkcFaC6cCt81jZell+jrhzCH
=Z5Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Two fixes for virtfs/9p from Paolo.
# gpg: Signature made Mon 30 Nov 2015 14:10:47 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
virtio-9p: use QEMU thread pool
fsdev-proxy-helper: avoid TOC/TOU race
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QEMU thread pool already has a mechanism to invoke callbacks in the main
thread. It does not need an EventNotifier and it is more efficient too.
Use it instead of GAsyncQueue + GThreadPool + glue.
As a side effect, it silences Coverity's complaint about an unchecked
return value for event_notifier_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(removed no more needed #include <glib.h> from virtio-9p-coth.h)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The taihu_cpld_writel() function had an obvious typo that meant that
if it was ever called it would go into an infinite recursion. Newer
versions of clang will detect and warn about this:
hw/ppc/ppc405_boards.c:481:1: warning: all paths through this function will call itself [-Winfinite-recursion]
Fix this by converting taihu_cpld from the legacy old_mmio accessors
to new-style ones, with an impl {} declaration to cause the core
memory code to do the splitting of 16 bit and 32 bit accesses into
multiple 8-bit accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
