This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU is started with `-D qemu.log.%d` without any `-d` option,
doing `log all` in the monitor fails with:
Filename template with '%d' required for 'tid'
It is confusing since '%d' was actually passed.
This happens because QEMU caches the log file name with %d converted
to getpid() since `tid` wasn't required. This name isn't suitable
for a subsequent enablement of per-thread logs. There's little cause
to change the behavior as `-d tid` is mostly used at user-only startup.
Drop the per-thread from the requested flags in this case : `log all`
will thus enable everything except `tid` instead of failing. This is
preferable over forcing the user to enable each log item individually.
With this patch, `tid` is now truely immutable : it can only be set
or unset from the command line and never changed afterwards.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-3-groug@kaod.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Per-thread logging was implemented under the assumption that once
enabled, it is not possible to switch back to single file logging.
This isn't enforced though and it is possible to go through the
global file opening sequence in per-thread mode. The code isn't
ready for this and produces unexpected results as detailed below.
Start QEMU in system emulation mode with `-D ./qemu.log.%d -d tid`
and then change the log level from the monitor to something that
doesn't have tid, e.g. `log cpu_reset`. The value of log_flags
is zero and per_thread is set to false : the rest of the code
then assumes it is running in the global log case and opens a
file named `qemu.log.%d`, which is obviously not an expected
behavior.
Enforce the immutability of the flag early in qemu_set_log_internal()
so that its value is correct for all subsequent users.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-2-groug@kaod.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mayfail is always passed as false for every invocation throughout the program.
It controls whether to printf or not to printf an error on
g_module_open failure.
Remove this unused argument.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929093035.4231-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WaitForMultipleObjects() can only wait for MAXIMUM_WAIT_OBJECTS
object handles. Correct the event array size in aio_poll() and
add a assert() to ensure it does not cause out of bound access.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221019102015.2441622-3-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the logic in qemu_add_wait_object() to avoid adding the same
HANDLE twice, as the behavior is undefined when passing an array
that contains same HANDLEs to WaitForMultipleObjects() API.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221019102015.2441622-2-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The maximum number of wait objects for win32 should be
MAXIMUM_WAIT_OBJECTS, not MAXIMUM_WAIT_OBJECTS + 1.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221019102015.2441622-1-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
-----BEGIN PGP SIGNATURE-----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=h0Ep
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu into staging
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When `-D ${logfile} -d tid` is passed, qemu_log_trylock() creates
a dedicated log file for the current thread and opens it. The
corresponding file descriptor is cached in a __thread variable.
Nothing is done to close the corresponding file descriptor when the
thread terminates though and the file descriptor is leaked.
The issue was found during code inspection and reproduced manually.
Fix that with an atexit notifier.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221021105734.555797-1-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for asynchronously tearing down a VM on Linux.
When qemu terminates, either naturally or because of a fatal signal,
the VM is torn down. If the VM is huge, it can take a considerable
amount of time for it to be cleaned up. In case of a protected VM, it
might take even longer than a non-protected VM (this is the case on
s390x, for example).
Some users might want to shut down a VM and restart it immediately,
without having to wait. This is especially true if management
infrastructure like libvirt is used.
This patch implements a simple trick on Linux to allow qemu to return
immediately, with the teardown of the VM being performed
asynchronously.
If the new commandline option -async-teardown is used, a new process is
spawned from qemu at startup, using the clone syscall, in such way that
it will share its address space with qemu.The new process will have the
name "cleanup/<QEMU_PID>". It will wait until qemu terminates
completely, and then it will exit itself.
This allows qemu to terminate quickly, without having to wait for the
whole address space to be torn down. The cleanup process will exit
after qemu, so it will be the last user of the address space, and
therefore it will take care of the actual teardown. The cleanup
process will share the same cgroups as qemu, so both memory usage and
cpu time will be accounted properly.
If possible, close_range will be used in the cleanup process to close
all open file descriptors. If it is not available or if it fails, /proc
will be used to determine which file descriptors to close.
If the cleanup process is forcefully killed with SIGKILL before the
main qemu process has terminated completely, the mechanism is defeated
and the teardown will not be asynchronous.
This feature can already be used with libvirt by adding the following
to the XML domain definition to pass the parameter to qemu directly:
<commandline xmlns="http://libvirt.org/schemas/domain/qemu/1.0">
<arg value='-async-teardown'/>
</commandline>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Tested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220812133453.82671-1-imbrenda@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmNawAcACgkQvobrtBUQ
T9/pWA/9FXE6kvkv9YQhb/h1rMALO1aLKqUG/jWKP/mzqqLpDKHxxPin/nw8RYff
xyHt5mC7t1g7a8FFMlXxFHw1WE9o46j3tQg2IokWlX2ossYaZQx+BVv4s1zjTxcK
KPVKWoEqN5sfa2T7gUGbfZ+dH9LSZ29DRT+GrO9YEvjdSg0yUKHXPetjw6iw5OVT
GuI22xOVKbuCBf7PW/nvUe/6prxAfc7IavvAusrdkMFXymcys87q7ZCxGYEsDxyC
vUkLdAoB9kcjwvmU+sZl9WhjasRQkUxW8zCToKea4TSS1fp5pgVL0TT4x7yq7ts4
nqnaqiSTBfRda62lF64A9lM91K7hbDqPC33FkCNKWJGsQAYIFvdVJdqJsvZHUr1/
3KyHkXMsyzRfGnT7MHK+GpwcgvTupBP8ceiyYq28CLNAKXpXb6vmJIsIAdF3UaYi
N320ogiU3iRmkqdbbbGTpBB40UQvQvdbmqKTTDmigLdpDL2TLzAqfpu1zepg+7xE
wcXoPM9ZcRSwM7i9QyPMtjharCTeVR/QPlUN9agDGOlzNpUahIC5YrmCVKXNunnE
M259Ytyb6ymaMrsHgshW1gJP3327N/lIOp5yLLHEzgLM1xAGOaDP83FsF8JA/Zsd
f1he75N3KbDPYhgrdfFfitcO8F8zvhK3AqyqNDPCpJKVSeKKqFE=
=qrzm
-----END PGP SIGNATURE-----
Merge tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu into staging
pull: crypto and io queue
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmNawAcACgkQvobrtBUQ
# T9/pWA/9FXE6kvkv9YQhb/h1rMALO1aLKqUG/jWKP/mzqqLpDKHxxPin/nw8RYff
# xyHt5mC7t1g7a8FFMlXxFHw1WE9o46j3tQg2IokWlX2ossYaZQx+BVv4s1zjTxcK
# KPVKWoEqN5sfa2T7gUGbfZ+dH9LSZ29DRT+GrO9YEvjdSg0yUKHXPetjw6iw5OVT
# GuI22xOVKbuCBf7PW/nvUe/6prxAfc7IavvAusrdkMFXymcys87q7ZCxGYEsDxyC
# vUkLdAoB9kcjwvmU+sZl9WhjasRQkUxW8zCToKea4TSS1fp5pgVL0TT4x7yq7ts4
# nqnaqiSTBfRda62lF64A9lM91K7hbDqPC33FkCNKWJGsQAYIFvdVJdqJsvZHUr1/
# 3KyHkXMsyzRfGnT7MHK+GpwcgvTupBP8ceiyYq28CLNAKXpXb6vmJIsIAdF3UaYi
# N320ogiU3iRmkqdbbbGTpBB40UQvQvdbmqKTTDmigLdpDL2TLzAqfpu1zepg+7xE
# wcXoPM9ZcRSwM7i9QyPMtjharCTeVR/QPlUN9agDGOlzNpUahIC5YrmCVKXNunnE
# M259Ytyb6ymaMrsHgshW1gJP3327N/lIOp5yLLHEzgLM1xAGOaDP83FsF8JA/Zsd
# f1he75N3KbDPYhgrdfFfitcO8F8zvhK3AqyqNDPCpJKVSeKKqFE=
# =qrzm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Oct 2022 13:29:43 EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu:
crypto: add test cases for many malformed LUKS header scenarios
crypto: ensure LUKS tests run with GNUTLS crypto provider
crypto: quote algorithm names in error messages
crypto: split off helpers for converting LUKS header endianess
crypto: split LUKS header definitions off into file
crypto: check that LUKS PBKDF2 iterations count is non-zero
crypto: strengthen the check for key slots overlapping with LUKS header
crypto: validate that LUKS payload doesn't overlap with header
crypto: enforce that key material doesn't overlap with LUKS header
crypto: enforce that LUKS stripes is always a fixed value
crypto: sanity check that LUKS header strings are NUL-terminated
tests: avoid DOS line endings in PSK file
crypto: check for and report errors setting PSK credentials
scripts: check if .git exists before checking submodule status
seccomp: Get actual errno value from failed seccomp functions
io/channel-watch: Fix socket watch on Windows
io/channel-watch: Drop the unnecessary cast
io/channel-watch: Drop a superfluous '#ifdef WIN32'
util/qemu-sockets: Use g_get_tmp_dir() to get the directory for temporary files
crypto/luks: Support creating LUKS image on Darwin
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Socket communication in the libqtest and libqmp codes uses read()
and write() which work on any file descriptor on *nix, and sockets
in *nix are an example of a file descriptor.
However sockets on Windows do not use *nix-style file descriptors,
so read() and write() cannot be used on sockets on Windows.
Switch over to use send() and recv() instead which work on both
Windows and *nix.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-3-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be consistent with socket_uri(), add 'tcp:' prefix for inet type in
socket_parse(), by default socket_parse() use tcp when no prefix is
provided (format is host:port).
In socket_uri(), use 'vsock:' prefix for vsock type rather than 'tcp:'
because it makes a vsock address look like an inet address with CID
misinterpreted as host.
Goes back to commit 9aca82ba31 "migration: Create socket-address parameter"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename SocketAddress_to_str() to socket_uri() and move it to
util/qemu-sockets.c close to socket_parse().
socket_uri() generates a string from a SocketAddress while
socket_parse() generates a SocketAddress from a string.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... and implement it under POSIX. When a ThreadContext is provided,
create new threads via the context such that these new threads obtain a
properly configured CPU affinity.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-6-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's make it easier to pin threads created via a ThreadContext to
all host CPUs currently belonging to a given set of host NUMA nodes --
which is the common case.
"node-affinity" is simply a shortcut for setting "cpu-affinity" manually
to the list of host CPUs belonging to the set of host nodes. This property
can only be written.
A simple QEMU example to set the CPU affinity to host node 1 on a system
with two nodes, 24 CPUs each, whereby odd-numbered host CPUs belong to
host node 1:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,node-affinity=1
And we can query the cpu-affinity via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
1,
3,
5,
7,
9,
11,
13,
15,
17,
19,
21,
23,
25,
27,
29,
31,
33,
35,
37,
39,
41,
43,
45,
47
]
We cannot query the node-affinity:
(qemu) qom-get tc1 node-affinity
Error: Insufficient permission to perform this operation
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
Note that if the host CPUs for a host node change due do CPU hot(un)plug
CPU onlining/offlining (i.e., lscpu output changes) after the ThreadContext
was started, the CPU affinity will not get updated.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-5-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Setting the CPU affinity of QEMU threads is a bit problematic, because
QEMU doesn't always have permissions to set the CPU affinity itself,
for example, with seccomp after initialized by QEMU:
-sandbox enable=on,resourcecontrol=deny
General information about CPU affinities can be found in the man page of
taskset:
CPU affinity is a scheduler property that "bonds" a process to a given
set of CPUs on the system. The Linux scheduler will honor the given CPU
affinity and the process will not run on any other CPUs.
While upper layers are already aware of how to handle CPU affinities for
long-lived threads like iothreads or vcpu threads, especially short-lived
threads, as used for memory-backend preallocation, are more involved to
handle. These threads are created on demand and upper layers are not even
able to identify and configure them.
Introduce the concept of a ThreadContext, that is essentially a thread
used for creating new threads. All threads created via that context
thread inherit the configured CPU affinity. Consequently, it's
sufficient to create a ThreadContext and configure it once, and have all
threads created via that ThreadContext inherit the same CPU affinity.
The CPU affinity of a ThreadContext can be configured two ways:
(1) Obtaining the thread id via the "thread-id" property and setting the
CPU affinity manually (e.g., via taskset).
(2) Setting the "cpu-affinity" property and letting QEMU try set the
CPU affinity itself. This will fail if QEMU doesn't have permissions
to do so anymore after seccomp was initialized.
A simple QEMU example to set the CPU affinity to host CPU 0,1,6,7 would be:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,cpu-affinity=0-1,cpu-affinity=6-7
And we can query it via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
0,
1,
6,
7
]
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
In general, the interface behaves like pthread_setaffinity_np(): host
CPU numbers that are currently not available are ignored; only host CPU
numbers that are impossible with the current kernel will fail. If the
list of host CPU numbers does not include a single CPU that is
available, setting the CPU affinity will fail.
A ThreadContext can be reused, simply by reconfiguring the CPU affinity.
Note that the CPU affinity of previously created threads will not get
adjusted.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-4-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Usually, we let upper layers handle CPU pinning, because
pthread_setaffinity_np() (-> sched_setaffinity()) is blocked via
seccomp when starting QEMU with
-sandbox enable=on,resourcecontrol=deny
However, we want to configure and observe the CPU affinity of threads
from QEMU directly in some cases when the sandbox option is either not
enabled or not active yet.
So let's add a way to configure CPU pinning via
qemu_thread_set_affinity() and obtain CPU affinity via
qemu_thread_get_affinity() and implement them under POSIX using
pthread_setaffinity_np() + pthread_getaffinity_np().
Implementation under Windows is possible using SetProcessAffinityMask()
+ GetProcessAffinityMask(), however, that is left as future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-3-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's
* give the function a "qemu_*" style name
* make sure the parameters in the implementation match the prototype
* rename smp_cpus to max_threads, which makes the semantics of that
parameter clearer
... and add a function documentation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-2-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
When a RAMBlockNotifier is added, ->ram_block_added() is called with all
existing RAMBlocks. There is no equivalent ->ram_block_removed() call
when a RAMBlockNotifier is removed.
The util/vfio-helpers.c code (the sole user of RAMBlockNotifier) is fine
with this asymmetry because it does not rely on RAMBlockNotifier for
cleanup. It walks its internal list of DMA mappings and unmaps them by
itself.
Future users of RAMBlockNotifier may not have an internal data structure
that records added RAMBlocks so they will need ->ram_block_removed()
callbacks.
This patch makes ram_block_notifier_remove() symmetric with respect to
callbacks. Now util/vfio-helpers.c needs to unmap remaining DMA mappings
after ram_block_notifier_remove() has been called. This is necessary
since users like block/nvme.c may create additional DMA mappings that do
not originate from the RAMBlockNotifier.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a coroutine wakes up it may determine that it must re-queue.
Normally coroutines are pushed onto the back of the CoQueue, but for
fairness it may be necessary to push it onto the front of the CoQueue.
Add a flag to specify that the coroutine should be pushed onto the front
of the CoQueue. A later patch will use this to ensure fairness in the
bounce buffer CoQueue used by the blkio BlockDriver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace the existing logic to get the directory for temporary files
with g_get_tmp_dir(), which works for win32 too.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to msdn documentation and Linux man pages, send() should try
to send as much as possible in blocking mode, while recv() may return
earlier with a smaller available amount, we should try to continue
send/recv from there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-3-marcandre.lureau@redhat.com>
With a pipe or other reasons, read/write may return less than the
requested bytes. This happens with the test-io-channel-command test on
Windows. glib spawn code uses a binary pipe of 4096 bytes, and the first
read returns that much (although more are requested), for some unclear
reason...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-2-marcandre.lureau@redhat.com>
As described in:
https://learn.microsoft.com/en-us/visualstudio/debugger/how-to-set-a-thread-name-in-native-code?view=vs-2022
SetThreadDescription() is available since Windows 10, version 1607 and
in some versions only by "Run Time Dynamic Linking". Its declaration is
not yet in mingw, so we lookup the function the same way glib does.
Tested with Visual Studio Community 2022 debugger.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-23-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_get_aio_context inspects a coroutine, but it does
not have to be called from the coroutine itself (or from any
coroutine).
Reviewed-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_socketpair() will create a pair of connected sockets
with FD_CLOEXEC set
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <17fa1eff729eeabd9a001f4639abccb127ceec81.1661240709.git.tugy@chinatelecom.cn>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
=eMUT
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJjEaMLAAoJEO8Ells5jWIRoRwIAJpwefLgH/+lkd1mtWqxBhuS
# KLa0bkcS6nIGnjQzNX/XWipu/5tMbBLzbaKw0myodvoK6Yx0MFog1cWf6gLHuvWH
# Jy3ONUrF9umHYuOa9sJJtXv/aP7neNJSB3RW67BaiLCLkaetDj9lLciA/KKMvb/I
# JNFtuLVTPibZ5iVTjvifFWmJD/Yk0P8mlrH5yfrA3B2EaaWf1es0GWobGIwwLu9s
# ZSqjhMDAhfOW2E1sBh7jFRh4lJX1t1jRhyIGx2bOXevPx2hFHq6FSq+yuJ9OsZvO
# wC8mC4DD+fovypDWbv3WLslIejM0+THD8KuBQnZtKX5Mbhc+0cELpIFLUdH95TM=
# =eMUT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Sep 2022 02:30:35 EDT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (21 commits)
net: tulip: Restrict DMA engine to memories
net/colo.c: Fix the pointer issue reported by Coverity.
vdpa: Delete CVQ migration blocker
vdpa: Add virtio-net mac address via CVQ at start
vhost_net: add NetClientState->load() callback
vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
vdpa: Move command buffers map to start of net device
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vhost_net: Add NetClientInfo stop callback
vhost_net: Add NetClientInfo start callback
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost: Delete useless read memory barrier
vhost: use SVQ element ndescs instead of opaque data for desc validation
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vdpa: Use ring hwaddr at vhost_vdpa_svq_unmap_ring
vhost: Always store new kick fd on vhost_svq_set_svq_kick_fd
vdpa: Make SVQ vring unmapping return void
vdpa: Remove SVQ vring from iova_tree at shutdown
util: accept iova_tree_remove_parameter by value
vdpa: do not save failed dma maps in SVQ iova tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support for the unix socket has existed both in BSD and Linux for the
longest time, but not on Windows. Since Windows 10 build 17063 [1],
the native support for the unix socket has come to Windows. Starting
this build, two Win32 processes can use the AF_UNIX address family
over Winsock API to communicate with each other.
[1] https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220802075200.907360-3-bmeng.cn@gmail.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The last user of this function has just been removed, so we can
drop this function now, too.
Message-Id: <20220810125720.3849835-4-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 06680b15b4 moved qemu_*_exec_dir() to cutils but forgot
to move the macOS dyld(3) include, resulting in the following
error (when building with Homebrew GCC on macOS Monterey 12.4):
[313/1197] Compiling C object libqemuutil.a.p/util_cutils.c.o
FAILED: libqemuutil.a.p/util_cutils.c.o
../../util/cutils.c:1039:13: error: implicit declaration of function '_NSGetExecutablePath' [-Werror=implicit-function-declaration]
1039 | if (_NSGetExecutablePath(fpath, &len) == 0) {
| ^~~~~~~~~~~~~~~~~~~~
../../util/cutils.c:1039:13: error: nested extern declaration of '_NSGetExecutablePath' [-Werror=nested-externs]
Fix by moving the include line to cutils.
Fixes: 06680b15b4 ("include: move qemu_*_exec_dir() to cutils")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220809222046.30812-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
close() is a *nix function. It works on any file descriptor, and
sockets in *nix are an example of a file descriptor.
closesocket() is a Windows-specific function, which works only
specifically with sockets. Sockets on Windows do not use *nix-style
file descriptors, and socket() returns a handle to a kernel object
instead, so it must be closed with closesocket().
In QEMU there is already a logic to handle such platform difference
in os-posix.h and os-win32.h, that:
* closesocket maps to close on POSIX
* closesocket maps to a wrapper that calls the real closesocket()
on Windows
Replace the call to close a socket with closesocket() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A recent commit moved some Haiku-specific code parts from oslib-posix.c
to cutils.c, but failed to move the corresponding header #include
statement, too, so "make vm-build-haiku.x86_64" is currently broken.
Fix it by moving the header #include, too.
Fixes: 06680b15b4 ("include: move qemu_*_exec_dir() to cutils")
Message-Id: <20220718172026.139004-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before this change, the directory of the executable was being added to
resolve modules in the build tree. However, get_relocated_path() can now
resolve them with the new bundle mechanism.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-5-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Developers often run QEMU without installing. The bundle mechanism
allows to look up files which should be present in installation even in
such a situation.
It is a general mechanism and can find any files in the installation
tree. The build tree will have a new directory, qemu-bundle, to
represent what files the installation tree would have for reference by
the executables.
Note that it abandons compatibility with Windows older than 8. The
extended support for the prior version, 7 ended more than 2 years ago,
and it is unlikely that someone would like to run the latest QEMU on
such an old system.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220624145039.49929-3-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new API, to make a time limited call of the coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
It always returns IOVA_OK so nobody uses it.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220427154931.3166388-1-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It seems that aio_wait_kick always required a memory barrier
or atomic operation in the caller, but nobody actually
took care of doing it.
Let's put the barrier in the function instead, and pair it
with another one in AIO_WAIT_WHILE. Read aio_wait_kick()
comment for further explanation.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220524173054.12651-1-eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much logic to simply check that bitmaps are of the same
size. Let's just define that hbitmap_merge() and
bdrv_dirty_bitmap_merge_internal() require their argument bitmaps be of
same size, this simplifies things.
Let's look through the callers:
For backup_init_bcs_bitmap() we already assert that merge can't fail.
In bdrv_reclaim_dirty_bitmap_locked() we gracefully handle the error
that can't happen: successor always has same size as its parent, drop
this logic.
In bdrv_merge_dirty_bitmap() we already has assertion and separate
check. Make the check explicit and improve error message.
Signed-off-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220517111206.23585-4-v.sementsov-og@mail.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
