Previously ORC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Previously ANDC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The fallback implementation of "ret = arg1 ^ -1" isn't ideal
because of the extra tcg op to load the minus one.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The fallback implementation of "ret = 0 - arg1" isn't ideal,
first because of the extra tcg op to load the zero, and second
because we fail to handle zero as %g0 for arg1 of the sub.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save':
/src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
/src/qemu/net.c: In function `net_check_clients':
/src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function
/src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
New version after malc's comments. (This avoids having to do
#if defined __linux__ || defined __FreeBSD__ || defined __FreeBSD_kernel__
for the third case.)
Submitted by: Andreas Tobler <andreast@fgznet.ch> (original version)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
New version after malc's comments. (Added error handling.)
Submitted by: Andreas Tobler <andreast@fgznet.ch>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
When qemu-img can't open the new backing file for a rebase, it prints an error
message which contains the file name of the old backing file. This is wrong,
obviously.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a possible read beyond the end of the temporary buffers used for
comparing data in the old and the new backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a write requests crosses a L2 table boundary and all clusters until the
end of the L2 table are usable for the request, we must not look at the next
L2 entry because we already have arrived at the end of the array.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the device can't be created, don't leak the QemuOpts and release the id of
the device that should have been added by the failed device_add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi,
Kevin and I have agreed on the approach for this one now. So here is
the latest version of the patch for QEMU, submitting e820 reservation
entries via fw_cfg.
Cheers,
Jes
Use qemu-cfg to provide the BIOS with an optional table of e820 entries.
Notify the BIOS of the location of the TSS+EPT range to by reserving
it via the e820 table.
This matches a corresponding patch for Seabios, however older versions
of Seabios will default to the hardcoded address range and stay
compatible with current QEMU.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Save/restore information necessary to continue in progress PIO/ATAPI CMD
transfers.
This includes the IO buffer.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael noted we don't allow disabling of MSI for the virtio-serial-pci
device. Fix that.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since commit 98b19252cf, all
serial devices declare MULTIPORT feature.
To allow 0.12 compatibility, we should clear this when
max_nr_ports is 1.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio-serial-pci can support multiple ports in the current development
version that will become 0.13. Add compatibility options for the 0.12
and 0.11 pc machine types.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The version 0.13 will be the new default and compatibility options will
be added to the 0.12 version.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I found that the QEMU USB keyboard support does not work properly with
the Set_Idle command. Once a non-zero value is given to Set_Idle,
then the keyboard reports an event on every poll - not based on the
time issued in the Set_Idle command.
I changed the code (see patch below) and it works for me. I'm not
that familiar with the qemu internals, so I'm not sure if this is the
best way to implement this feature.
-Kevin
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Open backing file read-only where possible
Upgrade backing file to read-write during commit, back to read-only after commit
If upgrade fail, back to read-only. If also fail, "disconnect" the drive.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Starting with mingw32-runtime 3.15, C99/POSIX
format strings (%zu, %lld, ...) are supported
by defining __USE_MINGW_ANSI_STDIO=1.
As QEMU uses such format strings, unconditionally
define this macro. It won't hurt on older revisions
of mingw32-runtime.
Tested with manually installed mingw32-runtime 3.15
on debian (cross compiled + wine).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Arghh... Adding missing S-O-B
Hi Anthony. I wonder if there was a problem when importing my async
command handler patchset. Since the 'balloon' command completes
immediately, it must call the completion callback before returning.
That call was missing but is added by the patch below.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Handlers can generate only one error in a call, we let the
programmer know if they brake this rule and clients will only
get the first generated error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QObject Monitor handlers should not call any Monitor print
function: they should only build objects, printing is done
by common code.
Current QMP code will ignore such calls, as we can't send
garbage to clients, additionally it will also emit an
undefined error on the assumption that print calls usually
report errors.
However, the right way to deal with this is to rely on a
return code. This has been fixed by other commit already.
Now, this commit drops the error from monitor_vprintf() and
adds a better debugging mechanism for those 'stray' prints:
we count them if debug is enabled and let the developer know
if a QObject handler is trying to print anything.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit verifies the following two rules specified by
Markus Armbruster:
1. If the handler returns failure, it must have passed an error.
If it didn't, it's broken. Report an internal error to the client,
and report the bug to the programmer.
2. If the handler returns success, it must not have passed an error.
If it did, it's broken. Report the error to the client, and report
the bug to the programmer.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can ignore calls to monitor_vprintf() in QMP mode and use
monitor_puts() directly in monitor_json_emitter().
This allows us to drop this ugly hack.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add configure options (--enable-debug-mon and --disable-debug-mon)
plus the MON_DEBUG() macro.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that all handlers are converted to cmd_new_ret(), we can rename
it back to cmd_new(). But now it returns a value.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that trivial as the call chain also has to be modified.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that this function only fails in QMP, in the user Monitor
it prints the help text instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While there I'm also dropping a unneeded else clause (the last
one in the function).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following handlers always succeed and hence can be converted
to cmd_new_ret() in the same commit.
- do_stop()
- do_quit()
- do_system_reset()
- do_system_powerdown()
- do_migrate_cancel()
- do_qmp_capabilities()
- do_migrate_set_speed()
- do_migrate_set_downtime()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to implement the new error handling and debugging
mechanism for command handlers, we need to change the cmd_new()
callback to return a value.
This commit introduces cmd_new_ret(), which returns a value and
will be used only temporarily to handle the transition from
cmd_new().
That is, as soon as all command handlers are ported to cmd_new_ret(),
it will be renamed back to cmd_new() and the new error handling
and debugging mechanism will be added on top of it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Moving stuff in console.c to avoid the need for prototypes makes
this patch a bit bigger, but there's no change in the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Let register_displayallocator hand over the old width/height to the new
allocator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ensure initialization of a dumb display, if needed, by making
all accesses go through get_displaystate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
