QEMU now requires an x86-64-v2 host, which has SSE2.
Use it freely in buffer_is_zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU now requires an x86-64-v2 host, which always has CMOV.
Use it freely in TCG generated code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only user was the SSE4.1 variant of buffer_is_zero, which has
been removed; code to compute CPUINFO_SSE4 is dead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we switched all consumers of the URI code to use the URI
parsing functions from glib instead, we can remove our internal
URI parsing code since it is not used anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-14-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we bumped the minimum glib version to 2.66, we can drop
the old code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because non-embedded aarch64 is expected to have AdvSIMD enabled, merely
double-check with the compiler flags for __ARM_NEON and don't bother with
a runtime check. Otherwise, model the loop after the x86 SSE2 function.
Use UMAXV for the vector reduction. This is 3 cycles on cortex-a76 and
2 cycles on neoverse-n1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because the three alternatives are monotonic, we don't need
to keep a couple of bitmasks, just identify the strongest
alternative at startup.
Generalize test_buffer_is_zero_next_accel and init_accel
by always defining an accel_table array.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split less-than and greater-than 256 cases.
Use unaligned accesses for head and tail.
Avoid using out-of-bounds pointers in loop boundary conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Increase unroll factor in SIMD loops from 4x to 8x in order to move
their bottlenecks from ALU port contention to load issue rate (two loads
per cycle on popular x86 implementations).
Avoid using out-of-bounds pointers in loop boundary conditions.
Follow SSE2 implementation strategy in the AVX2 variant. Avoid use of
PTEST, which is not profitable there (like in the removed SSE4 variant).
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-6-amonakov@ispras.ru>
Use of prefetching in bufferiszero.c is quite questionable:
- prefetches are issued just a few CPU cycles before the corresponding
line would be hit by demand loads;
- they are done for simple access patterns, i.e. where hardware
prefetchers can perform better;
- they compete for load ports in loops that should be limited by load
port throughput rather than ALU throughput.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-5-amonakov@ispras.ru>
Test for length >= 256 inline, where is is often a constant.
Before calling into the accelerated routine, sample three bytes
from the buffer, which handles most non-zero buffers.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Message-Id: <20240206204809.9859-3-amonakov@ispras.ru>
[rth: Use __builtin_constant_p; move the indirect call out of line.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thanks to early checks in the inline buffer_is_zero wrapper, the SIMD
routines are invoked much more rarely in normal use when most buffers
are non-zero. This makes use of AVX512 unprofitable, as it incurs extra
frequency and voltage transition periods during which the CPU operates
at reduced performance, as described in
https://travisdowns.github.io/blog/2020/01/17/avxfreq1.html
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-4-amonakov@ispras.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The SSE4.1 variant is virtually identical to the SSE2 variant, except
for using 'PTEST+JNZ' in place of 'PCMPEQB+PMOVMSKB+CMP+JNE' for testing
if an SSE register is all zeroes. The PTEST instruction decodes to two
uops, so it can be handled only by the complex decoder, and since
CMP+JNE are macro-fused, both sequences decode to three uops. The uops
comprising the PTEST instruction dispatch to p0 and p5 on Intel CPUs, so
PCMPEQB+PMOVMSKB is comparatively more flexible from dispatch
standpoint.
Hence, the use of PTEST brings no benefit from throughput standpoint.
Its latency is not important, since it feeds only a conditional jump,
which terminates the dependency chain.
I never observed PTEST variants to be faster on real hardware.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-2-amonakov@ispras.ru>
The DEBUG_PLUGIN_GEN_OPS ifdef is replaced with "-d op_plugin".
The second pr_ops call can be obtained with "-d op".
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Address the comment added in commit 4629ed1e98
("qerror: Finally unused, clean up"), from 2015:
/*
* These macros will go away, please don't use
* in new code, and do not add new ones!
*/
Mechanical transformation using:
$ sed -i -e "s/QERR_INVALID_PARAMETER,/\"Invalid parameter '%s'\",/" \
$(git grep -lw QERR_INVALID_PARAMETER)
Manually simplify qemu_opts_create(), and remove the macro definition
in include/qapi/qmp/qerror.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312141343.3168265-6-armbru@redhat.com>
QMP is irrelevant for user emulation. Extract the code
related to QMP in a different source file, which won't
be build for user emulation binaries. This avoid pulling
pointless code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240404194757.9343-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The yank feature is not used in user emulation.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel P. Berrangé <berrange@redhat.com> pointed out that the coroutine
pool size heuristic is very conservative. Instead of halving
max_map_count, he suggested reserving 5,000 mappings for non-coroutine
users based on observations of guests he has access to.
Fixes: 86a637e481 ("coroutine: cap per-thread local pool size")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240320181232.1464819-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The coroutine pool implementation can hit the Linux vm.max_map_count
limit, causing QEMU to abort with "failed to allocate memory for stack"
or "failed to set up stack guard page" during coroutine creation.
This happens because per-thread pools can grow to tens of thousands of
coroutines. Each coroutine causes 2 virtual memory areas to be created.
Eventually vm.max_map_count is reached and memory-related syscalls fail.
The per-thread pool sizes are non-uniform and depend on past coroutine
usage in each thread, so it's possible for one thread to have a large
pool while another thread's pool is empty.
Switch to a new coroutine pool implementation with a global pool that
grows to a maximum number of coroutines and per-thread local pools that
are capped at hardcoded small number of coroutines.
This approach does not leave large numbers of coroutines pooled in a
thread that may not use them again. In order to perform well it
amortizes the cost of global pool accesses by working in batches of
coroutines instead of individual coroutines.
The global pool is a list. Threads donate batches of coroutines to when
they have too many and take batches from when they have too few:
.-----------------------------------.
| Batch 1 | Batch 2 | Batch 3 | ... | global_pool
`-----------------------------------'
Each thread has up to 2 batches of coroutines:
.-------------------.
| Batch 1 | Batch 2 | per-thread local_pool (maximum 2 batches)
`-------------------'
The goal of this change is to reduce the excessive number of pooled
coroutines that cause QEMU to abort when vm.max_map_count is reached
without losing the performance of an adequately sized coroutine pool.
Here are virtio-blk disk I/O benchmark results:
RW BLKSIZE IODEPTH OLD NEW CHANGE
randread 4k 1 113725 117451 +3.3%
randread 4k 8 192968 198510 +2.9%
randread 4k 16 207138 209429 +1.1%
randread 4k 32 212399 215145 +1.3%
randread 4k 64 218319 221277 +1.4%
randread 128k 1 17587 17535 -0.3%
randread 128k 8 17614 17616 +0.0%
randread 128k 16 17608 17609 +0.0%
randread 128k 32 17552 17553 +0.0%
randread 128k 64 17484 17484 +0.0%
See files/{fio.sh,test.xml.j2} for the benchmark configuration:
https://gitlab.com/stefanha/virt-playbooks/-/tree/coroutine-pool-fix-sizing
Buglink: https://issues.redhat.com/browse/RHEL-28947
Reported-by: Sanjay Rao <srao@redhat.com>
Reported-by: Boaz Ben Shabat <bbenshab@redhat.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240318183429.1039340-1-stefanha@redhat.com>
touch_all_pages() can return early, before creating threads. In this case,
however, it leaks the MemsetContext that it has allocated at the
beginning of the function.
Reported by Coverity as CID 1534922.
Fixes: 04accf43df ("oslib-posix: initialize backend memory objects in parallel", 2024-02-06)
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass an error object as the third parameter to "notifier with return"
notifiers, so clients no longer need to bundle an error object in the
opaque data. The new parameter is used in a later patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
SocketAddress branch @fd is documented in enum SocketAddressType,
unlike the other branches. That's because the branch's type is String
from common.json.
Use a local copy of String, so we can put the documentation in the
usual place.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
make vm-build-freebsd fails with:
ld: error: undefined symbol: inotify_init1
>>> referenced by filemonitor-inotify.c:183 (../src/util/filemonitor-inotify.c:183)
>>> util_filemonitor-inotify.c.o:(qemu_file_monitor_new) in archive libqemuutil.a
On FreeBSD the inotify functions are defined in libinotify.so. Add it
to the dependencies.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240206002344.12372-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git misc net/af-xdp.c plugins/*.c audio/pwaudio.c util/userfaultfd.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbd (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
They are not used anywhere, so there's no need to keep them around.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-5-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that uri_resolve_relative() has been removed, this function is not
used in QEMU anymore - and if somebody needs this functionality, they
can simply use g_uri_escape_string() from the glib instead.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These rather complex functions have never been used since they've been
introduced in 2012, so looks like they are not really useful for QEMU.
And since the static normalize_uri_path() function is also only used by
uri_resolve(), we can remove that function now, too.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
uri_string_unescape() basically does the same as the glib function
g_uri_unescape_segment(). So we can get rid of our implementation
completely by simply using the glib function instead.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240123182247.432642-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coroutine may be pooled even after COROUTINE_TERMINATE if
CONFIG_COROUTINE_POOL is enabled and fake stack should be saved in
such a case to keep AddressSanitizerUseAfterReturn working. Even worse,
I'm seeing stack corruption without fake stack being saved.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240117-asan-v2-1-26f9e1ea6e72@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-6-philmd@linaro.org>
uintptr_t, or unsigned long which is equivalent on Linux I32LP64 systems,
is an unsigned type and there is no need to further cast to __u64 which is
another unsigned integer type; widening casts from unsigned integers
zero-extend the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use PPC_FEATURE2_ISEL and PPC_FEATURE2_VEC_CRYPTO from linux headers
instead of the GNU specific PPC_FEATURE2_HAS_ISEL and
PPC_FEATURE2_HAS_VEC_CRYPTO. This fixes build with musl libc.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1861
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes: 63922f467a ("tcg/ppc: Replace HAVE_ISEL macro with a variable")
Fixes: 68f340d4cd ("tcg/ppc: Enable Altivec detection")
Message-Id: <20231219105236.7059-1-ncopa@alpinelinux.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To be able to peek at FIFO content without popping it,
introduce the fifo8_peek_buf() method by factoring
common content from fifo8_pop_buf().
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231109192814.95977-3-philmd@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There might be cases where we know the number of bytes we can
pop from the FIFO, or we simply don't care how many bytes is
returned. Allow fifo8_pop_buf() to take a NULL numptr.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231109192814.95977-2-philmd@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_context_set_aio_params() doesn't use its undocumented
Error** argument. Remove it to simplify.
Note this removes a use of "unchecked Error**" in
iothread_set_aio_context_params().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231120171806.19361-1-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have qemu_prealloc_mem()
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-19-philmd@linaro.org>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-70-richard.henderson@linaro.org>
