task->complete is a bool not an integer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20210707180449.32665-1-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd supports 1 byte alignment for all aio operations.
Currently, there is no API call to query limits from the Ceph
ObjectStore backend. So drop the bdrv_refresh_limits completely
until there is such an API call.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-7-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch wittingly sets BDRV_REQ_NO_FALLBACK and silently ignores
BDRV_REQ_MAY_UNMAP for older librbd versions.
The rationale for this is as follows (citing Ilya Dryomov current RBD
maintainer):
---8<---
a) remove the BDRV_REQ_MAY_UNMAP check in qemu_rbd_co_pwrite_zeroes()
and as a consequence always unmap if librbd is too old
It's not clear what qemu's expectation is but in general Write
Zeroes is allowed to unmap. The only guarantee is that subsequent
reads return zeroes, everything else is a hint. This is how it is
specified in the kernel and in the NVMe spec.
In particular, block/nvme.c implements it as follows:
if (flags & BDRV_REQ_MAY_UNMAP) {
cdw12 |= (1 << 25);
}
This sets the Deallocate bit. But if it's not set, the device may
still deallocate:
"""
If the Deallocate bit (CDW12.DEAC) is set to '1' in a Write Zeroes
command, and the namespace supports clearing all bytes to 0h in the
values read (e.g., bits 2:0 in the DLFEAT field are set to 001b)
from a deallocated logical block and its metadata (excluding
protection information), then for each specified logical block, the
controller:
- should deallocate that logical block;
...
If the Deallocate bit is cleared to '0' in a Write Zeroes command,
and the namespace supports clearing all bytes to 0h in the values
read (e.g., bits 2:0 in the DLFEAT field are set to 001b) from
a deallocated logical block and its metadata (excluding protection
information), then, for each specified logical block, the
controller:
- may deallocate that logical block;
"""
https://nvmexpress.org/wp-content/uploads/NVM-Express-NVM-Command-Set-Specification-2021.06.02-Ratified-1.pdf
b) set BDRV_REQ_NO_FALLBACK in supported_zero_flags
Again, it's not clear what qemu expects here, but without it we end
up in a ridiculous situation where specifying the "don't allow slow
fallback" switch immediately fails all efficient zeroing requests on
a device where Write Zeroes is always efficient:
$ qemu-io -c 'help write' | grep -- '-[zun]'
-n, -- with -z, don't allow slow fallback
-u, -- with -z, allow unmapping
-z, -- write zeroes using blk_co_pwrite_zeroes
$ qemu-io -f rbd -c 'write -z -u -n 0 1M' rbd:foo/bar
write failed: Operation not supported
--->8---
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-6-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-5-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While at it just call rbd_get_size and avoid rbd_image_info_t.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-4-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-3-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ceph Luminous (version 12.2.z) is almost 4 years old at this point.
Bump the requirement to get rid of the ifdef'ry in the code.
Qemu 6.1 dropped the support for RHEL-7 which was the last supported
OS that required an older librbd.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-2-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Starting from ceph Pacific, RBD has built-in support for image-level encryption.
Currently supported formats are LUKS version 1 and 2.
There are 2 new relevant librbd APIs for controlling encryption, both expect an
open image context:
rbd_encryption_format: formats an image (i.e. writes the LUKS header)
rbd_encryption_load: loads encryptor/decryptor to the image IO stack
This commit extends the qemu rbd driver API to support the above.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20210627114635.39326-1-oro@il.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sometimes the parser needs to further split a token it has collected
from the token input stream. Right now, it does a cursory check to see
if the relevant characters appear in the token to determine if it should
break it down further.
However, qemu_rbd_next_tok() will escape characters as it removes tokens
from the token stream and plain strchr() won't. This can make the
initial strchr() check slightly misleading since it implies
qemu_rbd_next_tok() will find the token and split on it, except the
reality is that qemu_rbd_next_tok() will pass over it if it is escaped.
Use a custom strchr to avoid mixing escaped and unescaped string
operations. Furthermore, this code is identical to how
qemu_rbd_next_tok() seeks its next token, so incorporate this custom
strchr into the body of that function to reduce duplication.
Reported-by: Han Han <hhan@redhat.com>
Fixes: https://bugzilla.redhat.com/1873913
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210421212343.85524-3-ckuehl@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When we allocate 'q_namespace', we forgot to set 'has_q_namespace'
to true. This can cause several issues, including a memory leak,
since qapi_free_BlockdevCreateOptions() does not deallocate that
memory, as reported by valgrind:
13 bytes in 1 blocks are definitely lost in loss record 7 of 96
at 0x4839809: malloc (vg_replace_malloc.c:307)
by 0x48CEBB8: g_malloc (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x48E3FE3: g_strdup (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x180010: qemu_rbd_co_create_opts (rbd.c:446)
by 0x1AE72C: bdrv_create_co_entry (block.c:492)
by 0x241902: coroutine_trampoline (coroutine-ucontext.c:173)
by 0x57530AF: ??? (in /usr/lib64/libc-2.32.so)
by 0x1FFEFFFA6F: ???
Fix setting 'has_q_namespace' to true when we allocate 'q_namespace'.
Fixes: 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210329150129.121182-3-sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qemu_rbd_connect(), 'mon_host' is allocated by qemu_rbd_mon_host()
using g_strjoinv(), but it's only freed in the error path, leaking
memory in the success path as reported by valgrind:
80 bytes in 4 blocks are definitely lost in loss record 5,028 of 6,516
at 0x4839809: malloc (vg_replace_malloc.c:307)
by 0x5315BB8: g_malloc (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x532B6FF: g_strjoinv (in /usr/lib64/libglib-2.0.so.0.6600.8)
by 0x87D07E: qemu_rbd_mon_host (rbd.c:538)
by 0x87D07E: qemu_rbd_connect (rbd.c:562)
by 0x87E1CE: qemu_rbd_open (rbd.c:740)
by 0x840EB1: bdrv_open_driver (block.c:1528)
by 0x8453A9: bdrv_open_common (block.c:1802)
by 0x8453A9: bdrv_open_inherit (block.c:3444)
by 0x8464C2: bdrv_open (block.c:3537)
by 0x8108CD: qmp_blockdev_add (blockdev.c:3569)
by 0x8EA61B: qmp_marshal_blockdev_add (qapi-commands-block-core.c:1086)
by 0x90B528: do_qmp_dispatch_bh (qmp-dispatch.c:131)
by 0x907EA4: aio_bh_poll (async.c:164)
Fix freeing 'mon_host' also when qemu_rbd_connect() ends correctly.
Fixes: 0a55679b4a
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210329150129.121182-2-sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
Commit 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
introduced namespace support for RBD, but we forgot to add the
new 'namespace' options to qemu_rbd_strong_runtime_opts[].
The 'namespace' is used to identify the image, so it is a strong
option since it can changes the data of a BDS.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1821528
Fixes: 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
Cc: Florian Florensa <fflorensa@online.net>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200914190553.74871-1-sgarzare@redhat.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This saw its last use in 4bfb274165.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-2-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Convert
visit_type_FOO(v, ..., &ptr, &err);
...
if (err) {
...
}
to
visit_type_FOO(v, ..., &ptr, errp);
...
if (!ptr) {
...
}
for functions that set @ptr to non-null / null on success / error.
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
Now that there are no clients of bdrv_has_zero_init_truncate, none of
the drivers need to worry about providing it.
What's more, this eliminates a source of some confusion: a literal
reading of the documentation as written in ceaca56f and implemented in
commit 1dcaf527 claims that a driver which returns 0 for
bdrv_has_zero_init_truncate() must not return 1 for
bdrv_has_zero_init(); this condition was violated for parallels, qcow,
and sometimes for vdi, although in practice it did not matter since
those drivers also lacked .bdrv_co_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-10-eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate always returns 1 because rbd always
0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Starting from ceph Nautilus, RBD has support for namespaces, allowing
for finer grain ACLs on images inside a pool, and tenant isolation.
In the rbd cli tool documentation, the new image-spec and snap-spec are :
- [pool-name/[namespace-name/]]image-name
- [pool-name/[namespace-name/]]image-name@snap-name
When using an non namespace's enabled qemu, it complains about not
finding the image called namespace-name/image-name, thus we only need to
parse the image once again to find if there is a '/' in its name, and if
there is, use what is before it as the name of the namespace to later
pass it to rados_ioctx_set_namespace.
rados_ioctx_set_namespace if called with en empty string or a null
pointer as the namespace parameters pretty much does nothing, as it then
defaults to the default namespace.
The namespace is extracted inside qemu_rbd_parse_filename, stored in the
qdict, and used in qemu_rbd_connect to make it work with both qemu-img,
and qemu itself.
Signed-off-by: Florian Florensa <fflorensa@online.net>
Message-Id: <20200110111513.321728-2-fflorensa@online.net>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Replay is capable of recording normal BH events, but sometimes
there are single use callbacks scheduled with aio_bh_schedule_oneshot
function. This patch enables recording and replaying such callbacks.
Block layer uses these events for calling the completion function.
Replaying these calls makes the execution deterministic.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to implement .bdrv_has_zero_init_truncate() for every block
driver that supports truncation and has a .bdrv_has_zero_init()
implementation.
Implement it the same way each driver implements .bdrv_has_zero_init().
This is at least not any more unsafe than what we had before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
RBD APIs don't allow us to write more than the size set with
rbd_create() or rbd_resize().
In order to support growing images (eg. qcow2), we resize the
image before write operations that exceed the current size.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190509145927.293369-1-sgarzare@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some block drivers have traditionally changed their node to read-only
mode without asking the user. This behaviour has been marked deprecated
since 2.11, expecting users to provide an explicit read-only=on option.
Now that we have auto-read-only=on, enable these drivers to make use of
the option.
This is the only use of bdrv_set_read_only(), so we can make it a bit
more specific and turn it into a bdrv_apply_auto_read_only() that is
more convenient for drivers to use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit e2b8247a32 introduced an error path in qemu_rbd_open() after
calling rbd_open(), but neglected to close the image again in this error
path. The error path should contain everything that the regular close
function qemu_rbd_close() contains.
This adds the missing rbd_close() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split warnings consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract, and
improve a rather useless warning in sheepdog.c.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-4-armbru@redhat.com>
Drop changes to "without an explicit read-only=on" warnings, because
there's a series removing them pending. Also drop a cc: to a former
Sheepdog maintainer.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
When we converted rbd to get rid of the older key/value-centric
encoding format, we broke compatibility with image files with backing
file strings encoded in the old format.
This leaves a bit of an ugly conundrum, and a hacky solution.
If the initial attempt to parse the "proper" options fails, it assumes
that we may have an older key/value encoded filename. Fall back to
attempting to parse the filename, and extract the required options from
it. If that fails, pass along the original error message.
We do not support mixed modern usage alongside legacy keyvalue pair
usage.
A deprecation warning has been added, although care should be taken
when actually deprecating since the impact is not limited to
commandline or qapi usage, but also opening existing images.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 15b332e5432ad069441f7275a46080f465d789a0.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Code movement to pull the conversion from Qdict to BlockdevOptionsRbd
into a helper function.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 5b49a980f2cde6610ab1df41bb0277d00b5db893.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Legacy -drive supports "password-secret" parameter that isn't
available with -blockdev / blockdev-add. That's because we backed out
our first try to provide it there due to interface design doubts, in
commit 577d8c9a81, v2.9.0.
This is the second try. It brings back the parameter, except it's
named "key-secret" now.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
Addressed by the rename.
* We're not sure where member @password-secret belongs (see the
previous commit).
See previous commit.
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter auth-client-required lets you configure authentication
methods. We tried to provide that in v2.9.0, but backed out due to
interface design doubts (commit 464444fcc1).
This commit is similar to what we backed out, but simpler: we use a
list of enumeration values instead of a list of objects with a member
of enumeration type.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
Fixed: we use "auth-client-required".
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
That fix is commit 2836284db6. This commit doesn't bring the bugs
back.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
We've had time to ponder, and we decided to stick to the way Ceph
configuration works: the key configured separately, and silently
ignored if the authentication method doesn't use it.
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
Likewise.
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
Again, we decided to stick to the way Ceph configuration works, except
we make auth-client-required a list of enumeration values instead of a
string containing keywords separated by delimiters.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Configuration flows through the block subsystem in a rather peculiar
way. Configuration made with -drive enters it as QemuOpts.
Configuration made with -blockdev / blockdev-add enters it as QAPI
type BlockdevOptions. The block subsystem uses QDict, QemuOpts and
QAPI types internally. The precise flow is next to impossible to
explain (I tried for this commit message, but gave up after wasting
several hours). What I can explain is a flaw in the BlockDriver
interface that leads to this bug:
$ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234
qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid
QMP blockdev-add is broken the same way.
Here's what happens. The block layer passes configuration represented
as flat QDict (with dotted keys) to BlockDriver methods
.bdrv_file_open(). The QDict's members are typed according to the
QAPI schema.
nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with
qdict_crumple() and a qobject input visitor.
This visitor comes in two flavors. The plain flavor requires scalars
to be typed according to the QAPI schema. That's the case here. The
keyval flavor requires string scalars. That's not the case here.
nfs_file_open() uses the latter, and promptly falls apart for members
@user, @group, @tcp-syn-count, @readahead-size, @page-cache-size,
@debug.
Switching to the plain flavor would fix -blockdev, but break -drive,
because there the scalars arrive in nfs_file_open() as strings.
The proper fix would be to replace the QDict by QAPI type
BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my
reach right now.
Next best would be to fix the block layer to always pass correctly
typed QDicts to the BlockDriver methods. Also beyond my reach.
What I can do is throw another hack onto the pile: have
nfs_file_open() convert all members to string, so use of the keyval
flavor actually works, by replacing qdict_crumple() by new function
qdict_crumple_for_keyval_qiv().
The pattern "pass result of qdict_crumple() to
qobject_input_visitor_new_keyval()" occurs several times more:
* qemu_rbd_open()
Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only
string members, its only a latent bug. Fix it anyway.
* parallels_co_create_opts(), qcow_co_create_opts(),
qcow2_co_create_opts(), bdrv_qed_co_create_opts(),
sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts()
These work, because they create the QDict with
qemu_opts_to_qdict_filtered(), which creates only string scalars.
The function sports a TODO comment asking for better typing; that's
going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter "filename" is deprecated since commit 91589d9e5c, v2.10.0.
Time to get rid of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the rbd driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if RBD is tolerant of
non-sector AIO operations, I went with the conservate approach
of adding .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 4bfb274 added some QAPIfication of option parsing in
qemu_rbd_open(). We need to remove all the options we processed,
otherwise in bdrv_open_inherit() we will think the remaining options are
invalid.
(This needs to go in 2.12 to avoid a regression that prevents rbd
from being opened.)
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
This is almost exactly the same code. The differences are that
qemu_rbd_connect() supports BlockdevOptionsRbd.server and that the cache
mode is set explicitly.
Supporting 'server' is a welcome new feature for image creation.
Caching is disabled by default, so leave it that way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that the options are already available in qemu_rbd_open() and not
only parsed in qemu_rbd_connect(), we can assign s->snap and
s->image_name there instead of passing the fields by reference to
qemu_rbd_connect().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to rbd, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
With the conversion to a QAPI options object, the function is now
prepared to be used in a .bdrv_co_create implementation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of the QemuOpts in qemu_rbd_connect(), we want to use QAPI
objects. As a preparation, fetch those options directly from the QDict
that .bdrv_open() supports in the rbd driver and that are not in the
schema.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The code to establish an RBD connection is duplicated between open and
create. In order to be able to share the code, factor out the code from
qemu_rbd_open() as a first step.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If we want to include the invalid option name in the error message, we
can't free the string earlier than that.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QED's bdrv_invalidate_cache implementation would like to reuse functions
that acquire/release the metadata locks. Call it from coroutine context
to simplify the logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-6-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
