Commit Graph

22 Commits

Author SHA1 Message Date
Alexander Graf
8118f0950f migration: Append JSON description of migration stream
One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.

We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.

This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.

With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05 17:16:14 +01:00
Fam Zheng
eda470e41a scsi: Drop scsi_req_abort
The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30 13:30:50 +02:00
Alexey Kardashevskiy
b9e77bc718 scsi: Print command name in debug
This makes scsi_command_name() public.

This makes use of scsi_command_name() in debug output for scsi-disk and
spapr-vscsi host bus adapter. Before this, SCSI used to print hex numbers
instead of human-friendly strings.

This adds GET_EVENT_STATUS_NOTIFICATION and READ_DISC_INFORMATION to
the list of SCSI commands supported by scsi_command_name().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 08:47:10 +02:00
Juan Quintela
3aff6c2fea savevm: Remove all the unneeded version_minimum_id_old (ppc)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2014-06-16 04:55:26 +02:00
Prasad Joshi
ec8929a555 spapr_vscsi: remove duplicate condition check
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-26 13:19:22 +01:00
Alexey Kardashevskiy
22956a3755 spapr-vscsi: fix CRQ status
Normally VIOSRP_OK (0) means success and non-zero value means error
except VIOSRP_OK2 (0x99) which is another success code by weird accident.

This uses 0 as success code always as some guests do not cope with
the 0x99 value well. The existing linux driver checks for both VIOSRP_OK
and VIOSRP_OK2 since 2.6.32.

This returns non-zero code (VIOSRP_ADAPTER_FAIL == 0x10) on errors which
can only happen if DMA write failed.

Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-14 10:06:55 +01:00
Nathan Whitehorn
3052f0d594 spapr_vscsi: Fix REPORT_LUNS handling
Intercept REPORT_LUNS commands addressed either to SRP LUN 0 or the well-known
LUN for REPORT_LUNS commands. This is required to implement the SAM and SPC
specifications.

Since SRP implements only a single SCSI target port per connection, the SRP
target is required to report all available LUNs in response to a REPORT_LUNS
command addressed either to LUN 0 or the well-known LUN. Instead, QEMU was
forwarding such requests to the first QEMU SCSI target, with the result that
initiators that relied on this feature would only see LUNs on the first QEMU
SCSI target.

Behavior for REPORT_LUNS commands addressed to any other LUN is not specified
by the standard and so is left unchanged. This preserves behavior under Linux
and SLOF, which enumerate possible LUNs by hand and so address no commands
either to LUN 0 or the well-known REPORT_LUNS LUN.

Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[agraf: define constant as ULL for 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:26 +01:00
Fam Zheng
c5f52875b9 scsi: Change scsi sense buf size to 252
Current buffer size fails the assersion check in like

    hw/scsi/scsi-bus.c:1655:    assert(req->sense_len <= sizeof(req->sense));

when backend (block/iscsi.c) returns more data then 96.

Exercise the core dump path by booting an Gentoo ISO with scsi-generic
device backed with iscsi (built with libiscsi 1.7.0):

    x86_64-softmmu/qemu-system-x86_64 \
    -drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \
    -device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \
    -device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \
    -boot d \
    -cdrom gentoo.iso

    qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete:
    Assertion `req->sense_len <= sizeof(req->sense)' failed.

According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So
increase the value to fix it.

Also remove duplicated define for the macro.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 10:02:23 +01:00
Alexey Kardashevskiy
29fdedfed5 spapr: add vio-bus devices to categories
In order to get devices appear in output of
"./qemu-system-ppc64 -device ?",
they must be assigned to one of DEVICE_CATEGORY_XXXX.

This puts VIO devices classes to corresponding categories.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-11-08 04:33:18 +01:00
Alexey Kardashevskiy
f4ff3b7ba1 spapr-vscsi: Report error on unsupported MAD requests
The existing driver just dropped unsupported requests. This adds error
responses to those unhandled requests.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 13:15:54 +02:00
Nikunj A. Dadhania
26573a0c1f spapr-vscsi: Adding VSCSI capabilities
This implements capabilities exchange between vscsi host and client.  As
at the moment no capability is supported, put zero flags everywhere and
return.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
2013-09-12 13:15:54 +02:00
Alexey Kardashevskiy
eb37f14658 spapr-vscsi: add task management
At the moment the guest kernel issues two types of task management
requests to the hypervisor - task about and lun reset. This adds
handling for these tasks. As spapr-vscsi starts calling scsi_req_cancel(),
free_request callback was implemented.

As virtio-vscsi, spapr-vscsi does not handle CLEAR_ACA either as CDB
control byte does not seem to be used at all so NACA bit is not
set to the guest so the guest has no good reason to call CLEAR_ACA task.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Fix choice of UCSOLCNT vs. SCSOLCNT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Andreas Färber
b1187b51ff scsi: Pass size to scsi_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() casts instead of direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Peter Maydell
f6bda9cb99 spapr: Rename 'dprintf' to 'DPRINTF'
'dprintf' is the name of a POSIX standard function so we should not be
stealing it for our debug macro. Rename to 'DPRINTF' (in line with
a number of other source files.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1375100199-13934-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:56:46 -05:00
Alexey Kardashevskiy
dbd94f8e4a spapr-vscsi: fix SOLNT bit in SRP_RSP
The driver calculates SOLNT bit from UCSOLNT and  SCSOLNT bits from
the request. The iu pointer has a type of srp_iu* which points to a union,
so cmd and rsp overlap. As the vscsi_send_rsp function calls
memset(iu, 0, sizeof(rsp)), it clears first 36 bytes of both cmd and rsp
so cmd.sol_not is always zero at the moment of calculating rsp.sol_not.

This fixes the bug.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1375073319-17488-1-git-send-email-aik@ozlabs.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
David Gibson
1168ec7da1 pseries: savevm support for PAPR virtual SCSI
This patch adds the necessary support for saving the state of the PAPR VIO
virtual SCSI device. This also saves and restores active SCSI requests.

[aik: implemented vscsi_req save/restore]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-8-git-send-email-aliguori@us.ibm.com
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:08 -05:00
Alexey Kardashevskiy
8ca8a17c9a pseries: rework PAPR virtual SCSI
The patch reimplements handling of indirect requests in order to
simplify upcoming live migration support.
- all pointers (except SCSIRequest*) were replaces with integer
indexes and offsets;
- DMA'ed srp_direct_buf kept untouched (ie. BE format);
- vscsi_fetch_desc() is added, now it is the only place where
descriptors are fetched and byteswapped;
- vscsi_req struct fields converted to migration-friendly types;
- many dprintf()'s fixed.

This also removed an unused field 'lun' from the spapr_vscsi device
which is assigned, but never used.  So, remove it.

[David Gibson: removed unused 'lun']
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-7-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:08 -05:00
Andreas Färber
caad4eb345 scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
KONRAD Frederic
11fc853c4c scsi: add bus_name parameter to scsi_bus_new.
This adds the possibility to create a scsi-bus with a specified name.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:05:15 -05:00
David Gibson
fd506b4f61 pseries: Convert VIO code to QOM style type safe(ish) casts
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts.  This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model.  This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 23:02:41 +02:00
Paolo Bonzini
47b43a1f41 hw: move private headers to hw/ subdirectories.
Many headers are used only in a single directory.  These can be
kept in hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:16 +02:00
Paolo Bonzini
53a5500244 hw: move SCSI controllers to hw/scsi/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00