this patch implements a cache that tracks if a page on the
iscsi target is allocated or not. The cache is implemented in
a way that it allows for false positives
(e.g. pretending a page is allocated, but it isn't), but
no false negatives.
The cached allocation info is then used to speed up the
read process for unallocated sectors by issueing a GET_LBA_STATUS
request for all sectors that are not yet known to be allocated.
If the read request is confirmed to fall into an unallocated
range we directly return zeroes and do not transfer the
data over the wire.
Tests have shown that a relatively small amount of GET_LBA_STATUS
requests happens a vServer boot time to fill the allocation cache
(all those blocks are not queried again).
Not to transfer all the data of unallocated sectors saves a lot
of time, bandwidth and storage I/O load during block jobs or storage
migration and it saves a lot of bandwidth as well for any big sequential
read of the whole disk (e.g. block copy or speed tests) if a significant
number of blocks is unallocated.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if the iscsi driver receives a write zeroes request with
the BDRV_REQ_MAY_UNMAP flag set it fails with -ENOTSUP
if the iscsi target does not support WRITE SAME with
UNMAP. However, the BDRV_REQ_MAY_UNMAP is only a hint
and writing zeroes with WRITE SAME will still be
better than falling back to writing zeroes with WRITE16.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some hardware instances do support MSI, so we should do likewise.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSI-X support has been fixed in qemu, so we can enable it again.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Do not change VMSTATE_PCI_DEVICE to PCIE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer firmware implement a LD_LIST_QUERY command, and due to a driver
issue no drives might be detected if this command isn't supported.
So add emulation for this command, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the "scsi-block:" prefix for error messages as suggested
by Markus.
Improve the previous patch by making the message the same for both
scsi-block and scsi-generic, including the strerror() output in both
and making an explicit reference to SG_IO. Also s/can not/cannot/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More often it is that bdrv_ioctl fails due to not supported by driver or
whatever reason, in this case we should be specific, because "interface
too old" is very confusing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTWWmXAAoJEK0ScMxN0CebsZkIANjGnHRgWcrTOBqsjFZ0liaH
1QtQPW4iCoTv+LmyW9BD2xWZGeGvst/sE6mpFCIu2Rp6F4ZUVpsmoKJt8KSXmWhS
SfX1qc/yOIo1/zq5gNl5e9aQXqey8qmq3sTRuSowVQ9T8+r7Rhs0bRgg5Q3SCqrk
gfb/EzzzfXUw/618vyOy6OReetL0ueZswyXFchnVl33NqnELz9Qf5J+eaxw/5vx1
t+eQ36HifAAz0VUkEE5rSfkX7+Uu8/XzmYZsao3f+MxJPjU78tvZs+i1QdZv4GC+
B0FYEGx6jXBZYeCfZ4ZlMXM2flu3tiB32ZANATrxV9iOvKk1fyDRTqdMucSuPr0=
=o672
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/tgt-axp-pull-20140424' into staging
target-alpha queue pull for 20140424
# gpg: Signature made Thu 24 Apr 2014 20:44:23 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/tgt-axp-pull-20140424: (40 commits)
target-alpha: Remove cpu_unique, cpu_sysval, cpu_usp
target-alpha: Tidy alpha_translate_init
target-alpha: Don't issue goto_tb under singlestep
target-alpha: Use non-local temps for zero/sink
target-alpha: Use extract to get insn fields
target-alpha: Convert mfpr/mtpr to source/sink
target-alpha: Convert gen_cpys et al to source/sink
target-alpha: Convert gen_fcvtlq/ql to source/sink
target-alpha: Convert gen_fcmov to source/sink
target-alpha: Convert gen_bcond to source/sink
target-alpha: Convert most ieee insns to source/sink
target-alpha: Convert gen_ieee_input to source/sink
target-alpha: Convert MVIOP2 to source/sink
target-alpha: Convert ARITH3 to source/sink
target-alpha: Convert FARITH3 to source/sink
target-alpha: Convert FARITH2 to source/sink
target-alpha: Convert gen_zap/not to source/sink
target-alpha: Convert gen_ins_h/l to source/sink
target-alpha: Convert gen_ext_h/l to source/sink
target-alpha: Convert gen_msk_h/l to source/sink
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iitJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Wed 23 Apr 2014 11:02:29 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
block/cloop: use PRIu32 format specifier for uint32_t
vmdk: Fix "%x" to PRIx32 in format strings for cid
qemu-img: Improve error messages
qemu-iotests: Check common namespace for id and node-name
block: Catch duplicate IDs in bdrv_new()
qemu-img: Avoid duplicate block device IDs
block: Add errp to bdrv_new()
convert fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
block: Remove -errno return value from bdrv_assign_node_name
curl: Replaced old error handling with error reporting API.
block: Handle error of bdrv_getlength in bdrv_create_dirty_bitmap
vmdk: Fix %d and %lld to PRI* in format strings
block: Check bdrv_getlength() return value in bdrv_make_zero()
block: Catch integer overflow in bdrv_rw_co()
block: Limit size to INT_MAX in bdrv_check_byte_request()
block: Fix nb_sectors check in bdrv_check_byte_request()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTVthUAAoJEK0ScMxN0Ceb5OUH/0Ri4engOQim3mV1jAOr2Vca
3zg+Hl8b+UioXD0se24Iipr6s+02G1DApbbLPX7DZAnoh9jEBvDtHOdde3pNbMkQ
jcTpShTyT7OKSsklRN19ckvk0ffBch5W3Ekkw6/Hg6ys2HIvirRpEL6R58oJNlP6
xcCkQZISZVkakbv5xft8YQo1v8wnU5q2l85OaC1aaDB6g+Y6ZgoA1qkWjqlHkmQk
1asflfbC0r5ke+yx7vz6310f5xBDLSVv17dqsDUr70o1m/6bem6wQXMczwmYUfk5
99OCPiqdiCZLJyVFvIvfwSakL9Bq/nvnmywXTkrB7rovk5VZz3gc4sJkuUkL+KM=
=URV1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/tcg-next-20140422' into staging
Pull tcg 2014-04-22
# gpg: Signature made Tue 22 Apr 2014 22:00:04 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/tcg-next-20140422:
tcg: Use HOST_WORDS_BIGENDIAN
tcg: Fix fallback from muls2_i64 to mulu2_i64
tcg: Use tcg_gen_mulu2_i32 in tcg_gen_muls2_i32
tcg: Relax requirement for mulu2_i32 on 32-bit hosts
tcg-s390: Remove W constraint
tcg-sparc: Use the type parameter to tcg_target_const_match
tcg-ppc64: Use the type parameter to tcg_target_const_match
tcg-aarch64: Remove w constraint
tcg: Add TCGType parameter to tcg_target_const_match
tcg: Fix out of range shift in deposit optimizations
tci: Mask shift counts to avoid undefined behavior
tcg: Mask shift quantities while folding
tcg: Use "unspecified behavior" for shifts
tcg: Fix warning (1 bit signed bitfield entry) and replace int by bool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTVU30AAoJEK0ScMxN0CebrMgH/16I+uED2phrizgnbAYngwA0
ZS8BpImCpg84KGXOVR7dlaUKhESFTfqrOHyFNycpq417ig32euvLhxleEFFcflsJ
oKTCsfxqcXyAgNjxuNKObafJ1mNrgtNm8vj8n0kpd8Suzn8j/DXawLrIG1KzSuKz
eoJJyLBhVouahKs7gaFRh6p2URpU5qx0hD8wmg0ljZ/+51mvWDKPnxD6TEpWCMDR
UvlBw+vjYc5+nr8B/nKEE+I5O1NRtJsAPEpYi2NeJhkC9b8j2GMaOu9q6FSZPkE2
8xsVIO3Qu9rO1porxSPJIuCsK8avyu77+12Co4zOuxCpGYMPlIHC35trsww+muA=
=DkMn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/tcg-ia64-pull-20140421' into staging
Pull for 20140421
# gpg: Signature made Mon 21 Apr 2014 17:57:24 BST using RSA key ID 4DD0279B
# gpg: Can't check signature: public key not found
* remotes/rth/tags/tcg-ia64-pull-20140421:
tcg-ia64: Convert to new ldst opcodes
tcg-ia64: Move part of softmmu slow path out of line
tcg-ia64: Convert to new ldst helpers
tcg-ia64: Reduce code duplication in tcg_out_qemu_ld
tcg-ia64: Move tlb addend load into tlb read
tcg-ia64: Move bswap for store into tlb load
tcg-ia64: Re-bundle the tlb load
tcg-ia64: Optimize small arguments to exit_tb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJTUMffAAoJEL7lnXSkw9fb5YQH/1SHIUFYl85Z/qIXQppcLQXm
Og32R7N82Z+E/FSBCuYWXB2Xo9jih4Pfn49A5tMyoITYQkrhNpHx3iXbZ2Ggk8/S
FmD5Uuc3lCfhfldDyfKtKGMli0CYsxXfBKupUTrImHEGeQ4WSU8fkzuQy6MP9W+m
HCms7nVXBgNqJ6mWBHkSgcXWbiKCPcfCJ5AvFQYDWHV83OF43jPnttXzKw/0ZNtZ
COLW9j5KdFHerQx02mFOT0Ne8TUgEEUgihaKm5fJqaSZ6+xAA7LuHnSdXrRCyMOQ
m9lY6WTQjf4XlSc4C13cAXSGgxfLeh8//DUa72huRuVMNRD66TGizoqlrS2NKuM=
=AXjD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-04-18' into staging
trivial patches for 2014-04-18
# gpg: Signature made Fri 18 Apr 2014 07:36:15 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB
* remotes/mjt/tags/trivial-patches-2014-04-18:
Fix grammar in comment
doc: grammify "allows to"
configure: Remove redundant message for -Werror
scripts: add sample model file for Coverity Scan
xbzrle.c: Avoid undefined behaviour with signed arithmetic
int128.h: Avoid undefined behaviours involving signed arithmetic
hw/ide/ahci.c: Avoid shift left into sign bit
net: Report error when device / hub combo is not found.
configure: Fix indentation of help for --enable/disable-debug-info
qga: trivial fix for unclear documentation of guest-set-time
vl: Report accelerator not supported for target more nicely
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PRIu32 is the format string specifier for uint32_t, let's use it.
Variables ->block_size, ->n_blocks, and i are all uint32_t.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implementation of a USB Media Transfer Device device for easy
filesharing. Read-only. No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously, when there is a user error in argv parsing, qemu-img prints
help text and exits.
Add an error_exit function to print a helpful error message and a hint
to run 'qemu-img --help' for more information.
As a bonus, "qemu-img <cmd> --help" now has a more reasonable exit code
0.
In the future the help text should be split by sub command, and only
print the information for the specified command.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A name that is taken by an ID can't be taken by a node-name at the same
time. Check that conflicts are correctly detected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.
This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-img used to use "image" as ID for all block devices. This means
that e.g. img_convert() ended up with potentially multiple source images
and one target image, all with the same ID. The next patch will catch
this and fail to open the block device.
This patch makes sure that qemu-img uses meaningful unique IDs for the
block devices it uses.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch converts fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
(error_setg() is part of error reporting API in include/qapi/error.h)
Signed-off-by: Aakriti Gupta <aakritty@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_getlength could fail, check the return value before using it.
Return NULL and set errno if it fails. Callers are updated to handle
the error case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Insanely large requests could cause an integer overflow in
bdrv_rw_co() while converting sectors to bytes. This patch catches the
problem and returns an error (if we hadn't overflown the integer here,
bdrv_check_byte_request() would have rejected the request, so we're not
breaking anything that was supposed to work before).
We actually do have a test case that triggers behaviour where we
accidentally let such a request pass, so that it would return success,
but read 0 bytes instead of the requested 4 GB. It fails now like it
should.
If the vdi block driver wants to be able to deal with huge images, it
can't read the whole block bitmap at once into memory like it does
today, but needs to use a metadata cache like qcow2 does.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8f4754ed intended to protect against integer overflow bugs in
block drivers by making sure that a single request that is passed to
drivers is no longer than INT_MAX bytes.
However, meanwhile there are some callers that don't use that code path
any more but call bdrv_check_byte_request() directy, so let's add a
check there as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Brown Bag sez, don't put the fallback code into the wrong function.
Also, check for muluh_i64 and use tcg_gen_mulu2_i64 instead of raw ops.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead require either mulu2_i32 or muluh_i32. The code in tcg-op.h
already supports looking for both. Previous incomplete conversion?
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most 64-bit targets need to be able to ignore the high bits
of a TCG_TYPE_I32 value.
Suggested-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
By inspection, for a deposit(x, y, 0, 64), we'd have a shift of (1<<64)
and everything else falls apart. But we can reuse the existing deposit
logic to get this right.
Signed-off-by: Richard Henderson <rth@twiddle.net>
TCG now requires unspecified behavior rather than a potential crash,
bring the C shift within the letter of the law.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The TCG result would be undefined, but we can at least produce one
plausible result and avoid triggering the wrath of analysis tools.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the definition such that shifts are not allowed to crash
for any input.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Static code analyzers complain about signed bitfields with only a single
bit. is_ld is used as a boolean value, so make it bool.
ppc64 already used bool for the 2nd argument is_ld of the local function
add_qemu_ldst_label. Modify all other TCG targets to do follow this
example.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
English language grammar does not allow usage
of the word "allows" directly followed by an
infinitive, declaring constructs like "something
allows to do somestuff" un-grammatical. Often
it is possible to just insert "one" between "allows"
and "to" to make the construct grammatical, but
usually it is better to re-phrase the statement.
This patch tries to fix 4 examples of "allows to"
usage in qemu doc, but does not address comments
in the code with similar constructs. It also adds
missing "the" in the same line.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The compiler flag -Werror is printed (or not printed) as any other
compiler flag which is part of QEMU_CFLAGS.
Therefore an extra output line for -Werror is redundant and can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is the model file that is being used for the QEMU project's scans
on scan.coverity.com. It fixed about 30 false positives (10% of the
total) and exposed about 60 new memory leaks.
The file is not automatically used; changes to it must be propagated
to the website manually by an admin (right now Markus, Peter and me
are admins).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
