Commit Graph

70 Commits

Author SHA1 Message Date
Kevin Wolf 8ee79e707a block: Catch backing files assigned to non-COW drivers
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).

This is obvious nonsense and should be rejected.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-26 13:51:01 +02:00
Chunyan Liu c282e1fdf7 cleanup QEMUOptionParameter
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:21 +08:00
Chunyan Liu 16d12159e2 qcow.c: replace QEMUOptionParameter with QemuOpts
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu 83d0521a1e change block layer to support both QemuOpts and QEMUOptionParamter
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Kevin Wolf d66e5cee00 qcow1: Stricter backing file length check
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead
of silently truncating them to 1023.

Also don't rely on bdrv_pread() catching integer overflows that make len
negative, but use unsigned variables in the first place.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19 11:36:49 +02:00
Kevin Wolf 46485de0cb qcow1: Validate image size (CVE-2014-0223)
A huge image size could cause s->l1_size to overflow. Make sure that
images never require a L1 table larger than what fits in s->l1_size.

This cannot only cause unbounded allocations, but also the allocation of
a too small L1 table, resulting in out-of-bounds array accesses (both
reads and writes).

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 11:36:49 +02:00
Kevin Wolf 42eb58179b qcow1: Validate L2 table size (CVE-2014-0222)
Too large L2 table sizes cause unbounded allocations. Images actually
created by qemu-img only have 512 byte or 4k L2 tables.

To keep things consistent with cluster sizes, allow ranges between 512
bytes and 64k (in fact, down to 1 entry = 8 bytes is technically
working, but L2 table sizes smaller than a cluster don't make a lot of
sense).

This also means that the number of bytes on the virtual disk that are
described by the same L2 table is limited to at most 8k * 64k or 2^29,
preventively avoiding any integer overflows.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19 11:36:49 +02:00
Kevin Wolf 7159a45b2b qcow1: Check maximum cluster size
Huge values for header.cluster_bits cause unbounded allocations (e.g.
for s->cluster_cache) and crash qemu this way. Less huge values may
survive those allocations, but can cause integer overflows later on.

The only cluster sizes that qemu can create are 4k (for standalone
images) and 512 (for images with backing files), so we can limit it
to 64k.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19 11:36:49 +02:00
Kevin Wolf ea54feff58 qcow1: Make padding in the header explicit
We were relying on all compilers inserting the same padding in the
header struct that is used for the on-disk format. Let's not do that.
Mark the struct as packed and insert an explicit padding field for
compatibility.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-19 11:36:49 +02:00
Max Reitz 521b2b5df0 block: Use correct width in format strings
Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.

This does not touch DEBUG output.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-30 14:46:17 +02:00
Deepak Kathayat dc6fb73d21 Fixed various typos
Signed-off-by: Deepak Kathayat <deepak.mk17@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-25 14:09:50 +01:00
Paolo Bonzini 76abe4071d block: do not abuse EMEDIUMTYPE
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird.  Improve the error by mentioning what format
was trying to open it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:24 +01:00
Paolo Bonzini b6d5066d32 qcow: correctly propagate errors
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:23 +01:00
Max Reitz 2e40134bfd block: Make bdrv_file_open() static
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.

Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:22 +01:00
Max Reitz 72daa72eee block: Allow reference for bdrv_file_open()
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz cc84d90ff5 block: Error parameter for create functions
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz 34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz d5124c00d8 bdrv: Use "Error" for creating images
Add an Error ** parameter to BlockDriver.bdrv_create to allow more
specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz 015a1036a7 bdrv: Use "Error" for opening images
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:47 +02:00
Paolo Bonzini 4bc74be997 block: return get_block_status data and flags for formats
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini b6b8a33354 block: introduce bdrv_get_block_status API
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.

This also touches all block drivers with a mostly mechanical rename.  The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Fam Zheng 4f6fd3491c block: make bdrv_delete() static
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.

This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Peter Lieven 3ac216270a block: change default of .has_zero_init to 0
.has_zero_init defaults to 1 for all formats and protocols.

this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().

if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.

during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.

vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.

a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 13:52:35 +02:00
Stefan Hajnoczi 16b3c5cd9f qcow: allow sub-cluster compressed write to last cluster
Compression in qcow requires image length to be a multiple of the
cluster size.  Lift this requirement by zero-padding the final cluster
when necessary.  The virtual disk size is still not cluster-aligned, so
the guest cannot access the zero sectors.

Note that this is almost identical to the qcow2 version of this code.
qcow2's compression code is drawn from qcow.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22 10:27:58 +02:00
Aurelien Jarno 753d9b82c5 aes: move aes.h from include/block to include/qemu
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.

Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-04-13 13:51:57 +02:00
Kevin Wolf 787e4a8500 block: Add options QDict to bdrv_file_open() prototypes
The new parameter is unused yet.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Kevin Wolf 1a86938f04 block: Add options QDict to .bdrv_open()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15 16:07:49 +01:00
Stefan Weil 15bac0d54f block: Use error code EMEDIUMTYPE for wrong format in some block drivers
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk
when a file with the wrong format is selected.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:35 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini caf71f86a3 migration: move include files to include/migration/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Jeff Cody d177692ede block: qcow image file reopen
These are the stubs for the file reopen drivers for the qcow format.

There is currently nothing that needs to be done by the qcow driver
in reopen.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:12 +02:00
Michael Tokarev d5e6b1619c change qemu_iovec_to_buf() to match other to,from_buf functions
It now allows specifying offset within qiov to start from and
amount of bytes to copy.  Actual implementation is just a call
to iov_to_buf().

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11 23:12:11 +04:00
Michael Tokarev 03396148bc allow qemu_iovec_from_buffer() to specify offset from which to start copying
Similar to
 qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
                   int c, size_t bytes);
the new prototype is:
 qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
                     const void *buf, size_t bytes);

The processing starts at offset bytes within qiov.

This way, we may copy a bounce buffer directly to
a middle of qiov.

This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.

As with utility implementation, we now assert that the
offset is inside actual iovec.  Nothing changed for
current callers, because `offset' parameter is new.

While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11 23:12:11 +04:00
Paolo Bonzini 29cdb2513c block: push recursive flushing up from drivers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:39 +02:00
Li Zhi Hui 2b16c9ffb2 qcow: Use bdrv functions to replace file operation
Since common file operation functions lack of error detection and use
much more I/O syscalls, so change them to bdrv series functions and
reduce I/O request.

Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Li Zhi Hui 84b0ec020f qcow: Return real error code in qcow_open
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi f8a2e5e3ca block: convert qcow2, qcow2, and vmdk to .bdrv_co_is_allocated()
The qcow2, qcow, and vmdk block drivers are based on coroutines.  They have a
coroutine mutex which protects internal state.  We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Dong Xu Wang a968168c58 block: Add coroutine_fn marker to coroutine functions
Looks better when reviewing these source files.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:35 +01:00
Kevin Wolf fd9f102c3e qcow: Add migration blocker
qcow caches L2 tables. For migration to work, they would have to be
invalidated. Block migration for now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-23 17:03:59 +01:00
Kevin Wolf c68b89acd6 block: Rename bdrv_co_flush to bdrv_co_flush_to_disk
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-11 14:02:59 +01:00
Kevin Wolf 64ebe71aa0 qcow: Fix bdrv_write_compressed error handling
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-28 19:25:49 +02:00
Paolo Bonzini 8b94ff8573 block: change flush to co_flush
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines.  For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.

The bdrv_flush callback is then unused and can be eliminated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:14 +02:00
Stefan Hajnoczi 6f6dc6565e block: drop redundant bdrv_flush implementation
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush().  Remove
the redundant .bdrv_flush() implementations.

[Paolo Bonzini: change raw driver to bdrv_co_flush]

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:13 +02:00
Stefan Weil add8d26203 block/qcow: Fix use of free() instead of g_free()
cppcheck reported this error:

qemu/block/qcow.c:599: error: Mismatching allocation and deallocation: cluster_data

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-14 14:57:46 +01:00
Frediano Ziglio 122bbd1dd9 qcow: remove old #undefined code
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23 17:41:14 +02:00
Frediano Ziglio 27deebe836 qcow: Remove QCowAIOCB
Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev

Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23 17:41:14 +02:00
Frediano Ziglio 43ca85b559 qcow: move some blocks of code to avoid useless variable initialization
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23 17:41:14 +02:00
Frediano Ziglio 430bbaaa95 qcow: QCowAIOCB field cleanup
remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb

Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23 17:41:14 +02:00
Frediano Ziglio f5cd8173e7 qcow/qcow2: Allocate QCowAIOCB structure using stack
instead of calling qemi_aio_get use stack

Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23 17:41:14 +02:00