Handle failure of get_user accessing the semihosting
argument block, rather than simply ignoring the failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixing a simple typo, s/errno/err/, that caused
the error status from GDB semihosted system calls
to be returned incorrectly.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit ac4119c (chardev: Use timer instead of bottom-half to postpone
open event, 2012-10-12) moved the alarm timer initialization to an earlier
point but failed to consider that it depends on qemu_init_main_loop.
Later, commit 1c53786 (vl: init main loop earlier, 2012-10-30) fixed
this, but left -daemonize in two different ways. First, timers need to
be reinitialized after forking. Second, the global mutex was being held
by the parent, and thus dropped after forking.
The first is now fixed using pthread_atfork. For the second part,
make sure that the global mutex is not taken before daemonization,
and similarly delay qemu_thread_self.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
init_timer_alarm was being called twice. This is not needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenBSD and Darwin do not have sem_timedwait. Implement a fallback
for them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Weakrefs only tell you if the symbol was defined elsewhere, so you
need a further check at runtime to pick the default definition
when needed.
This could be automated by the compiler, but it does not do it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/migr-coroutine:
migration: move process_incoming_migration to a coroutine
migration: handle EAGAIN while reading QEMUFile
migration: move qemu_fclose to process_incoming_migration
migration: close socket QEMUFile from socket_close
migration: xxx_close will only be called once
migration: use closesocket, not close
migration: use migrate_fd_close in migrate_fd_cleanup
migration: clean up server sockets and handlers before invoking process_incoming_migration
migration: replace qemu_stdio_fd with qemu_get_fd
migration: add qemu_get_fd
migration: consolidate QEMUFile methods in a single QEMUFileOps struct
migration: unify stdio-based QEMUFile operations
The final part of incoming migration, which now consists of
process_incoming_migration for all protocols, is thus made non-blocking.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will never happen right now (the assertion would fail). The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.
Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix is now just process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common suffix now is process_incoming_migration+qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to test s->fd again, it is tested in the caller.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows requires this. Migration does not quite work under Windows
but let's be uniform across QEMU.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
migrate_fd_cleanup will usually close the file descriptor via
buffered_file_close's call to migrate_fd_close. However, in the case
of s->file == NULL it is "inlining" migrate_fd_close (almost: there is a
direct close() instead of using s->close(s)). To fix the inconsistency
and clean up the code, allow multiple calls to migrate_fd_close and use
the function in migrate_fd_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A first step towards making a common "suffix" for all migration protocols,
and moving it to process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that qemu_fseek does not exist anymore, there is no reason to do
an fseek before fread/fwrite when operating on an stdio file.
Thus, unify the get/put_buffer callbacks used by qemu_fopen
with those used for pipes.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the following:
target-i386/cpu.o: In function `kvm_cpu_fill_host':
target-i386/cpu.c:783: undefined reference to `kvm_state'
I didn't notice the problem before because GCC was optimizing the entire
kvm_cpu_fill_host() function out (because all calls are conditional on
kvm_enabled()).
* cpu_x86_fill_model_id() is used only if CONFIG_KVM is set, so #ifdef it
entirely to avoid compiler warnings.
* kvm_cpu_fill_host() should be called only if KVM is enabled, so
use #ifdef CONFIG_KVM around the entire function body.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a93a4a2 changed the names of some fields in DisplayChangeListener
and broke compilation of the cocoa UI. Update to the new names.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Console cleanup series renamed dpy_resize and dpy_update all over the
tree, but hw/xenfb.c was forgotten. Update it too so it builds again.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just a few lines above, we already initialize rom_memory accordingly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixing a simple typo, s/errno/err/, that caused
the error status from GDB semihosted system calls
to be returned incorrectly.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add more helpful debug information to the cadence UART.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* stefanha/net:
e1000: pre-initialize RAH/RAL registers
net: Reject non-netdevs in qmp_netdev_del()
net: use "socket" model name for UDP sockets
e1000: drop check_rxov, always treat RX ring with RDH == RDT as empty
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master: (28 commits)
update-linux-headers.sh: Handle new kernel uapi/ directories
target-i386: kvm_cpu_fill_host: use GET_SUPPORTED_CPUID
target-i386: cpu: make -cpu host/check/enforce code KVM-specific
target-i386: make cpu_x86_fill_host() void
Emulate qemu-kvms -no-kvm option
Issue warning when deprecated -tdf option is used
Issue warning when deprecated drive parameter boot=on|off is used
Use global properties to emulate -no-kvm-pit-reinjection
Issue warning when deprecated -no-kvm-pit is used
Use machine options to emulate -no-kvm-irqchip
cirrus_vga: allow configurable vram size
target-i386: Add missing kvm cpuid feature name
i386: cpu: add missing CPUID[EAX=7,ECX=0] flag names
i386: kvm: filter CPUID leaf 7 based on GET_SUPPORTED_CPUID, too
i386: kvm: reformat filter_features_for_kvm() code
i386: kvm: filter CPUID feature words earlier, on cpu.c
i386: kvm: mask cpuid_ext4_features bits earlier
i386: kvm: mask cpuid_kvm_features earlier
i386: kvm: x2apic is not supported without in-kernel irqchip
i386: kvm: set CPUID_EXT_TSC_DEADLINE_TIMER on kvm_arch_get_supported_cpuid()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To avoid continually having to bump the initrd load address
to account for larger kernel images, put the initrd halfway
through RAM. This allows large kernels on new boards with lots
of RAM to work OK, without breaking existing usecases for
boards with only 32MB of RAM.
Note that this change fixes in passing a bug where we were
passing an overly large max_size to load_image_targphys()
for the initrd, which meant that we wouldn't correctly refuse
to load an enormous initrd that didn't actually fit into RAM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
pseries: Cleanup duplications of ics_valid_irq() code
pseries: Clean up inconsistent variable name in xics.c
target-ppc: Extend FPU state for newer POWER CPUs
target-ppc: Rework storage of VPA registration state
Revert "PPC: pseries: Remove hack for PIO window"
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
hw/sd.c: add SD card save/load support
vmstate: Add support for saving/loading bitmaps
hw/sd.c: Fix erase for high capacity cards
pflash_cfi01: Fix debug mode printfery
pflash_cfi0x: QOMified
pflash_cfi01: remove unused total_len field
pflash_cfi0x: remove unused base field
hw/versatile_i2c: Use LOG_GUEST_ERROR
hw/arm_l2x0: Use LOG_GUEST_ERROR
hw/arm_sysctl: Use LOG_GUEST_ERROR
hw/armv7m_nvic: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/arm_timer: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/arm_gic: Use LOG_GUEST_ERROR
hw/arm11mpcore: Use LOG_GUEST_ERROR rather than hw_error()
hw/pl190: Use LOG_UNIMP rather than hw_error()
hw/pl110: Use LOG_GUEST_ERROR rather than hw_error()
hw/pl080: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/pl061: Use LOG_GUEST_ERROR
hw/pl050: Use LOG_GUEST_ERROR
hw/exynos4_boards: Don't prematurely explode QEMUMachineInitArgs
...
This follows the logic of host-linux: If a 2.0 device has no ISO
endpoint and no interrupt endpoint with a packet size > 64, we can
attach it also to an 1.1 host controller. In case the redir server does
not report endpoint sizes, play safe and remove the 1.1 compatibility as
well. Moreover, if we detect a conflicting change in the configuration
after the device was already attached, it will be disconnected
immediately.
HdG: Several small cleanups and fixes
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So that the client gets a notification about us disconnecting the device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Older versions (anything but the latest) of Linux usbfs + libusb(x),
will submit larger (bulk) transfers split into multiple 16k submissions,
which means that rather then all tds getting linked into the queue in
one atomic operarion they get linked in a bunch at a time, which could
cause problems if:
1) We scan the queue while libusb is in the middle of submitting a split
bulk transfer
2) While this bulk transfer is pending we migrate to another host.
The problem is that after 2, the new host will rescan the queue and
combine the packets in one large transfer, where as 1) has caused the
original host to see them as 2 transfers. This patch fixes this by stopping
combinging if we detect a 16k transfer with its int_req flag set.
This should not adversely effect performance for other cases as:
1) Linux never sets the interrupt flag on packets other then the last
2) Windows does set the in_req flag on each td, but will submit large
transfers in 20k tds thus never triggering the check
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently we only do pipelining for output endpoints, since to properly
support short-not-ok semantics we can only have one outstanding input
packet. Since the ehci and uhci controllers have a limited per td packet
size guests will split large input transfers to into multiple packets,
and since we don't pipeline these, this comes with a serious performance
penalty.
This patch adds helper functions to (re-)combine packets which belong to 1
transfer at the guest device-driver level into 1 large transger. This can be
used by (redirection) usb-devices to enable pipelining for input endpoints.
This patch will combine packets together until a transfer terminating packet
is encountered. A terminating packet is a packet which meets one or more of
the following conditions:
1) The packet size is *not* a multiple of the endpoint max packet size
2) The packet does *not* have its short-not-ok flag set
3) The packet has its interrupt-on-complete flag set
The short-not-ok flag of the combined packet is that of the terminating packet.
Multiple combined packets may be submitted to the device, if the combined
packets do not have their short-not-ok flag set, enabling true pipelining.
If a combined packet does have its short-not-ok flag set the queue will
wait with submitting further packets to the device until that packet has
completed.
Once enabled in the usb-redir and ehci code, this improves the speed (MB/s)
of a Linux guest reading from a USB mass storage device by a factor of
1.2 - 1.5.
And the main reason why I started working on this, when reading from a pl2303
USB<->serial converter, it combines the previous 4 packets submitted per
device-driver level read into 1 big read, reducing the number of packets / sec
by a factor 4, and it allows to have multiple reads outstanding. This allows
for much better latency tolerance without the pl2303's internal buffer
overflowing (which was happening at 115200 bps, without serial flow control).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
