This is a long story. Red Hat has relicensed Windows KVM device drivers
in 2018 and there was an agreement that to avoid WHQL driver conflict
software manufacturers should set proper PCI subsystem vendor ID in
their distributions. Thus PCI subsystem vendor id becomes actively used.
The problem is that this field is applied by us via hardware compats.
Thus technically it could be lost.
This patch adds PCI susbsystem id and vendor id to exportable parameters
for validation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180918095852.28422-1-den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command. To do that, it needs:
1. An in-band command that *reliably* takes long enough to be
overtaken.
2. An out-of-band command to do the overtaking.
3. To avoid delays, a way to make the in-band command complete quickly
after it was overtaken.
To satisfy these needs, commit 469638f9cb provides the rather
peculiar oob-capable QMP command x-oob-test:
* With "lock": true, it waits for a global semaphore.
* With "lock": false, it signals the global semaphore.
To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.
Note that waiting for a semaphore violates the rules for oob-capable
commands. Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).
Having an externally visible QMP command that may hang the monitor is
not nice. Let's apply a little more ingenuity to the problem. Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.
For 1., use
{"execute": "blockdev-add", "id": ID1,
"arguments": {
"driver": "blkdebug", "node-name": ID1, "config": FIFO,
"image": { "driver": "null-co"}}}
where ID1 is an arbitrary string, and FIFO is the name of the FIFO.
For 2., use
{"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}
where ID2 is a different arbitrary string. Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.
For 3., open FIFO for writing.
Drop QMP command x-oob-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
Events are broadcast to all monitors. If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped. This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump
containing Windows crashdump header, which can help to convert to a valid
WinDbg-understandable crashdump file, or immediately create such file.
The crashdump will be obtained by joining physical memory dump and 8K header
exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option
'-w' was added to dump-guest-memory command. At the moment, only x64
configuration is supported.
Suitable driver can be found at
https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flat unions may now have uncovered branches, so it is possible to get rid
of empty types defined for that purpose only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commands query-chardev, query-version, query-name, query-uuid,
query-iothreads, query-memdev are informational and do not depend on
the machine being initialized. Make them available in preconfig
runstate to make the latter a little bit more useful.
The generic qom commands don't depend on the machine being initialized
either; so enabled qom-list, qom-get, qom-set, qom-list-types,
qom-list-properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180620153947.30834-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The recently introduced qom-list-properties QMP command raised
a question what properties it (and its cousin - device-list-properties)
can possibly print - only those defined by DeviceClass::props
or dynamically created in TypeInfo::instance_init() so properties created
elsewhere won't show up and this behaviour might confuse the user.
For example, PIIX4 does that from piix4_pm_realize() via
piix4_pm_add_propeties():
object_property_add_uint8_ptr(OBJECT(s), ACPI_PM_PROP_ACPI_ENABLE_CMD,
&acpi_enable_cmd, NULL);
This adds a note to the command descriptions about the limitation.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180530071129.9013-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it will allow mgmt to query possible CPUs, which depends on
used machine(version)/-smp options, without restarting
QEMU and use results to configure numa mapping or adding
CPUs with device_add* later.
PS:
*) device_add is not allowed to run at preconfig in this series
but later it could be dealt with by injecting -device
in preconfig state and letting existing -device handling
to actually plug devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1525423069-61903-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New option will be used to allow commands, which are prepared/need
to run, during preconfig state. Other commands that should be able
to run in preconfig state, should be amended to not expect machine
in initialized state or deal with it.
For compatibility reasons, commands that don't use new flag
'allow-preconfig' explicitly are not permitted to run in
preconfig state but allowed in all other states like they used
to be.
Within this patch allow following commands in preconfig state:
qmp_capabilities
query-qmp-schema
query-commands
query-command-line-options
query-status
exit-preconfig
to allow qmp connection, basic introspection and moving to the next
state.
PS:
set-numa-node and query-hotpluggable-cpus will be enabled later in
a separate patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526057503-39287-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're going to make the next release be 3.0, not 2.13; change
the annotations in our json appropriately.
Changes produced with
sed -i -e 's/2\.13/3.0/g' qapi/*.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180522104000.9044-2-peter.maydell@linaro.org
The TARGET_BASE_ARCH values from "configure" don't all map to the
@CpuInfoArch enum constants; in particular "s390x" from the former does
not match @s390 in the latter. Clients are known to rely on the @s390
constant specifically, so we can't change it silently. Instead, deprecate
the @CpuInfoFast.@arch member (in favor of @CpuInfoFast.@target) using the
regular deprecation process.
(No deprecation reminder is added to sysemu_target_to_cpuinfo_arch(): once
@CpuInfoFast.@arch is removed, the assignment expression that calls
sysemu_target_to_cpuinfo_arch() from qmp_query_cpus_fast() will have to
disappear; in turn the static function left without callers will also
break the build, thus it'll have to go.)
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-6-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new field @target (of type @SysEmuTarget) to the output of the
@query-cpus-fast command, which provides more information about the
emulation target than the field @arch (of type @CpuInfoArch). Make @target
the new discriminator for the @CpuInfoFast return structure. Keep @arch
for compatibility.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-5-lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have @SysEmuTarget, it makes sense to restrict
@TargetInfo.@arch to valid sysemu targets at the schema level.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-4-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Commit ca230ff33f added the @arch field to @CpuInfoFast, but it failed
to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
defined. The updated @query-cpus-fast example in "qapi-schema.json"
showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
generated with value 0.
All @arch values other than @s390 implied the @CpuInfoOther sub-struct
for @CpuInfoFast -- at the time of writing the patch --, thus no fields
other than @arch needed to be set when TARGET_S390X was not defined. Set
@arch now, by copying the corresponding assignments from
qmp_query_cpus().
* Commit 25fa194b7b added the @riscv enum constant to @CpuInfoArch (used
in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
and @query-cpus-fast commands, respectively), and assigned, in both
return structures, the @CpuInfoRISCV sub-structure to the new enum
value.
However, qmp_query_cpus_fast() would not populate either the @arch field
or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
qmp_query_cpus() would.
Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
state without interrupting KVM is an exceptional thing that only S390X
does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
exceptional in that it has state in QEMU that is actually interesting
for upper layers and can be retrieved without performance penalty". See
also
<https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f
Fixes: 25fa194b7b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It may need to treat PC-DIMM and NVDIMM differently, e.g., when
deciding the necessity of non-volatile flag bit in SRAT memory
affinity structures.
A new field 'nvdimm' is added to the union type MemoryDeviceInfo for
such purpose. Its type is currently PCDIMMDeviceInfo and will be
updated when necessary in the future.
It also fixes "info memory-devices"/query-memory-devices which
currently show nvdimm devices as dimm devices since
object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to
TYPE_PC_DIMM which it's been inherited from.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This command is only used to test OOB functionality. It should not be
used for any other purposes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-22-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
This event will be emitted if one QMP command is dropped. Also,
declare an enum for the reasons.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-16-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.
This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.
Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.
This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ObjectPropertyInfo is more generic and only missing @description.
This adds a description to ObjectPropertyInfo and removes
DevicePropertyInfo so the resulting ObjectPropertyInfo can be used
elsewhere.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
