check-tcg will automatically run the plugins against most TCG tests if
it is enabled in the build. We exclude sparc64-linux-user for now as
there are pending patches that need to be merged fixing it's fork
implementation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This adds a whole bunch of asserts which will catch bugs you might
introduce into the TCG code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Hopefully we'll see the same benefits as the other builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to:
https://docs.travis-ci.com/user/reference/osx/#macos-version
we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a job to generate the release tarball and build/install few
QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191007160450.3619-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The "command -v ccache && ccache ..." likely were supposed to test
the availability of ccache before running the program. But this
shell construct causes Travis to abort if ccache is not available.
Use an if-statement instead to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191009170701.14756-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
libgnutls-dev and libpng12-dev are not available in newer versions
of Ubuntu anymore, so installing these packages fails e.g. in the
new arm64 containers on Travis. Let's use newer versions of these
packages by default instead. (The old versions still get tested in
the "gcc-9" build).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've removed support for SDL 1.2 quite a while ago already, so let's
use SDL 2 now in Travis to get test coverage for SDL again.
And while we're at it, also add libsdl2-image-dev which can be used
by QEMU nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This library is needed to compile the VDE network backend.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Adding debug makes things run a bit slower so lets not hammer all the
targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
So far we were not testing virtio-9p in Travis yet, since we forgot to
install libcap-devel. Do it now to get some more test coverage.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190905113346.2473-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will set the CACHE_NAME variable to improve the caching
of various jobs using the same characteristics. Document it
first.
See https://docs.travis-ci.com/user/caching/#caches-and-build-matrices
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default, ccache is not installed on macOS environments.
See https://docs.travis-ci.com/user/caching/#ccache-on-macos
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Per https://ccache.dev/manual/latest.html:
By default, ccache tries to give as few false cache hits as
possible. However, in certain situations it’s possible that
you know things that ccache can’t take for granted.
[The CCACHE_SLOPINESS environment variable] makes it possible
to tell ccache to relax some checks in order to increase the
hit rate.
We can relax the ctime/mtime header checks:
- include_file_ctime
By default, ccache also will not cache a file if it
includes a header whose ctime is too new. This option
disables that check.
- include_file_mtime
By default, ccache will not cache a file if it includes
a header whose mtime is too new. This option disables
that check.
We also add a call to clear the cache statistics before running
the build, and display them when the build finishes.
See https://docs.travis-ci.com/user/caching/#ccache-cache
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avocado tests download artifacts from various sources.
These sources sometime have network issues resulting in build
failures. Cache Avocado cache to reduce build failure.
See https://docs.travis-ci.com/user/caching/#arbitrary-directories
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We always install the same packages ever and ever, cache them.
See https://docs.travis-ci.com/user/caching/#pip-cache
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to cache few gigabytes, increase the cache timeout
to avoid build failures when uploading our cache.
See https://docs.travis-ci.com/user/caching/#setting-the-timeout
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Using the 'multiple caching features' means explode the YAML array,
thus it eases the git workflow (it is easier to move patches around).
See https://docs.travis-ci.com/user/caching#enabling-multiple-caching-features
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170809202712.6951-4-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Just like the previous tests, boots a Linux kernel on a ppc64 target
using the pseries machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190607152223.9467-5-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
We have some flaky tests and usually the test passes on a retry.
Enable travis_retry for the test phase and see if that helps keep
things green.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It looks like the Travis image package databases are out of date
causing the build to error with:
Error: Your Homebrew is outdated. Please run `brew update`.
Error: Kernel.exit
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It's fairly common to build qemu-user binaries with --static linking
so the binary can be copied around without libraries. Enable --static
in the default qemu-user build to cover this.
There are other qemu-user builds that use dynamic linking so they
should catch any problems there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Because Travis doesn't allow us to keep files produced during tests
(such as log files), let's print the complete job log to the "console"
in case of job failures.
This is a debugging aid, and given that there's been some timeouts
happening on some tests, we absolutely needs the logs to have a proper
action.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190607152223.9467-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6d7a134da4.
We'll have a better fix, that will show the full avocado job log
only if a test case failed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We document this on our wiki and we might as well catch it in our CI
rather than waiting for it to be picked up on merge:
https://wiki.qemu.org/Testing#clang_UBSan
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The toolchain PPA has it so we might as well use it. We currently have
to add:
-Wno-error=stringop-truncation
as there are still strncpy operations in the tree operating on things
that haven't been annotated with QEMU_NONSTRING.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to enable the qemu-iotests during "make check" again,
and for running the iotests, we need bash and gnu-sed.
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. One extra command added to
the QEMU command line is '-vga std', because the kernel used is
known to crash without it.
If alpha is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:alpha" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:alpha tests/acceptance
$ avocado run -t machine:clipper tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-21-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a s390x target
using the s390-ccw-virtio machine.
Because it's not possible to have multiple VT220 consoles,
'-nodefaults' is used, so that the one set with set_console() works
correctly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-20-crosa@redhat.com>
[ehabkost: Updated kernel URL to point to fedoraproject.org]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on an arm target
using the virt machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-19-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a aarch64 target
using the virt machine.
One special option added is the CPU type, given that the kernel
selected fails to boot on the virt machine's default CPU (cortex-a15).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-18-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working.
If mips64el is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips64el"
tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips64el tests/acceptance
$ avocado run -t machine:malta tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190312171824.5134-15-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. Also, it relies on the serial
device set by the machine itself.
If mips is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips tests/acceptance
$ avocado run -t machine:malta tests/acceptance
$ avocado run -t endian:big tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312171824.5134-14-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This build keeps timing out on Travis and it's unlikely including the
additional guest front-ends will catch any failures in the fallback
code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This is essentially a softmmu tweak so don't bother building
linux-user builds as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
We define a new class of targets (MAIN_SOFTMMU_TARGETS) to cover the
major architectures. We either just build those or use the new
target-list-exclude mechanism to remove them from the list. This will
hopefully stop some of the longer builds hitting the Travis timeout
limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
While used by TCG it is not explicitly part of TCG and the tests can
be run standalone in a minimal build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The --enable-modules build is consistently tripping the time limit so
reduce our target list to the "major" architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will be moving all builds out of tree eventually but for now we
need to for building the docs as sphinx requires an out-of-tree build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Travis enforce the use of the git protocol v2 on their images,
but the 'xcode10' image doesn't handle this correctly, resulting
in the brew packages installation failing:
$ git config protocol.version
2
$ rvm $brew_ruby do brew bundle --verbose --global
/usr/local/bin/brew tap homebrew/bundle
==> Tapping homebrew/bundle
Cloning into '/usr/local/Homebrew/Library/Taps/homebrew/homebrew-bundle'...
fatal: unknown value for config 'protocol.version': 2
Error: Failure while executing; `git clone https://github.com/Homebrew/homebrew-bundle /usr/local/Homebrew/Library/Taps/homebrew/homebrew-bundle --depth=1` exited with 128.
Error: Failure while executing; `/usr/local/bin/brew tap homebrew/bundle` exited with 1.
The newer 'xcode10.2' beta [*] image doesn't have this limitation.
This image comes with the following brew packages pre-installed,
which extend the current code coverage:
- libffi
- libpng
- libtasn1
- gnutls
- jpeg
- nettle
[*] https://blog.travis-ci.com/2019-02-12-xcode-10-2-beta-2-is-now-available
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190220193541.24419-1-philmd@redhat.com>
[AJB: re-enabled MacOS build first]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 315d318452 turned --disable-uuid into a warning only; remove
the check from Travis.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190215094502.32149-2-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've had the build break with replication disabled, so lets
test that case in travis.
Suggsted-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190215094502.32149-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The builds are reaching the magic 50 minute limit with regularity so
lets split them up. Rather than doing a full debug build on both just
enable debug tcg for linux-user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It fails to install homebrew. Unfortunately we cannot mark
it as an expected failure because Travis does not match
allow_failures rows against include rows (only against the
main test matrix, which we do not use at all), so just disable
it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190220105131.23479-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The alternate coroutine builds are really only of interest to people
running KVM (although I think you could use them for TCG if you really
tried). As they tend to run long lets kill two birds with one stone
and fold the --disable-tcg build into them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Re-building the tools and documents by default is a little wasteful as
they are not really affected by the main build options. Split tools
and documents into their own task with a minimal softmmu and
linux-user target list just to check they don't interact badly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The default package set installed on macOS builders from Travis already
includes libffi and gettext as shown by log messages:
Skipping install of libffi formula. It is already up-to-date.
Using libffi
Skipping install of gettext formula. It is already up-to-date.
Using gettext
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For the two Python jobs, which seem to have the goal of making sure
QEMU builds successfully on the 3.0-3.6 spectrum of Python 3 versions,
the specified version is only applicable if a Python virtual
environment is used. To do that, it's necessary to define the
(primary?) language of the job to be Python.
Also, Travis doesn't have a 3.0 Python installation available for the
chosen distro, 3.4 being the lower version available.
Reference: https://docs.travis-ci.com/user/languages/python/#specifying-python-versions
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-4-crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[ehabkost: Now 3.4 is the lowest Python version available]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
fixup! Travis CI: make specified Python versions usable on jobs
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Travis is slowly catching up. Move to Xenial based images for our
current builds. These are now all proper VMs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The global defaults request "trusty" and "gcc", so matrix entries do not
need to repeat this.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Travis sometimes fails a build because it produces no console output for
over 10 minutes. If this is due to a genuine hang, it would be useful to
have used verbose test output to see where it failed. If this is just
due to tests being very slow, having verbose output might allow the
build to succeed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Travis container based envs are deprecated:
https://docs.travis-ci.com/user/reference/trusty/
"Container-based infrastructure is currently being deprecated.
Please remove any sudo: false keys in your .travis.yml file
to use the default fully-virtualized Linux infrastructure
instead."
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
One of the matrix entries redefines the script command in order to add
the ${MAKEFLAGS} variable. Ideally ${MAKEFLAGS} would be referenced by
the definition of the ${TEST_CMD} env variable, but this isn't possible
in travis. ${MAKEFLAGS} exists to eliminate duplication of flags in
every "make" command, but this cure causes a worse problem, namely the
reduplication of the "script" command. It is simpler to just insert "-j3"
directly into any "make" command.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Rather than poking homebrew manually we can specify the packages
needed via the homebrew addon. These are only installed on MacOS based
builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The configure script & Makefile are already capable of figuring out
which git submodules are required for a given build platform, and
cloning them at the right time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Matrix entries are defining env variables using two different syntax
styles:
- env: FOO=bar
WIZZ=bang
and
- env:
- FOO=bar
- WIZZ=bang
Switch everything to use the latter style as the more normal indentation
approach.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The current build matrix is constructed from entries listed under the
environment variable config section, as well as the general purpose
build matrix section. Move everything under the general purpose section
so it is clear at a glance what is in the matrix.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Improve the readability of the travis config by adding two blank lines
between each major section and matrix entry.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We have reached the point where the MacOSX build was regularly timing
out. So as before I've reduced the target list to "major"
architectures to try and bring the build time down. I've added an
additional MacOSX build with the latest XCode with a minimal list of
"most likely" targets on MacOS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This enables the execution of the acceptance tests on Travis.
Because the Travis environment is based on Ubuntu Trusty, it requires
the python3-pip and python3.4-venv packages.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-4-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This gives a more useful summary, sorted by descending % coverage,
after the tests have run. The final numbers will give an idea if our
coverage is getting better or worse.
To keep the width sane we need to post process the file that the old
gcovr tool generates. This is done with a mix of sed, awk and column
in the scripts/coverage-summary.sh script.
As quite a lot of lines don't get covered at all we filter out all the
0% lines. If the file doesn't appear it is not being exercised.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Force one config to build 'out-of-tree' (object files and executables
are created in a tree outside the project source code).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Builds only require:
- dtc
- keycodemapdb
- capstone
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: drop wget cache]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These builds are reaching regular timeouts and probably don't need to
be so widely exercised. ftrace and ust in particular are used in
conjunction with whole system profiling which makes most sense with
KVM setups, hence the native softmmu target.
We also expand simple to cover the multiple log backends while
restricting its scope to user-mode testing only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This build is regularly timing out and even switching off linux-user
wasn't enough. Instead explicitly choose a target list of broadly the
"major" architectures. This is enough to check the gprof build
machinery works without worrying about the actual coverage results.
I did try various YAML constructs for specifying CONFIG with
continuation but couldn't get any of them to work hence the very long
line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When configure fails in CI systems we must be able to see the contents
of the config.log file to diagnose the root cause.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
[AJB: used Eric's suggested {} form]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
GCC has moved on and so should we. We also enable apt update to ensure
we get the latest build from the toolchain PPA.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add some commentary and make the selection of Container based Trusty
build explicit. We will need to add VM builds later when using docker.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As Travis includes Clang 5.0 in its own build environment there is no
point manually building with older Clangs. We still need to test with
the two pythons though so we leave them as minimal system only builds.
We also split the clang build into two as it often exceeds the 40
minute build time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently the default testing doesn't exercise the linux-user builds
so there is no point spending time building them. We may want to
enable a separate gcov build once linux-user testing is re-enabled
although it's likely to report very low coverage.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As all the disabled features only affect system emulation we might as
well disable user mode to save compile time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As the build times have risen we keep timing out. Split the default
config into system and user builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The log backend is the default one, we don't need to explicitly set it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The modules and co-routine builds are only really relevant to softmmu
builds and regularly timeout on Travis. Let's disable linux-user
builds here for more headroom.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
It helps ASAN to detect more leaks on coroutine stacks, and to get rid
of some extra warnings.
Before:
tests/test-coroutine -p
/basic/lifecycle
/basic/lifecycle: ==20781==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
==20781==WARNING: ASan is ignoring requested __asan_handle_no_return:
stack top: 0x7ffcb184d000; bottom 0x7ff6c4cfd000; size: 0x0005ecb50000
(25446121472)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
OK
After:
tests/test-coroutine -p /basic/lifecycle
/basic/lifecycle: ==21110==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
OK
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Update travis to fix the build with ASAN annotations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently travis declares ancient python 2.4 is desired. Update that to
2.6 which is the oldest version any targetted distros still needs. If we
just list a python 3 version at the top level this will double the
number of travis jobs we run which is unreasonable.
So arbitrarily pick the clang test matrix entries to build with python
3.0 and 3.6, to extend coverage of python versions, without increasing
job count or build time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-14-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Because global environment variables can be overridden when .travis.yml
is processed by the docker-travis target, the effect of this patch is
that docker-travis now obeys the "J=n" option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's fairly easy for --disable-tcg to bitrot. Test it in our CI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170714093016.10897-1-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Trusty based builds run a little slower than the main container
based ones. This is also true for the latest version of Clang. The
builds are getting very close (and occasionally run over) the 50 minute
timeout. Rather than partitioning by target I just split them into
linux-user and system builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Although we've reduced the matrix to avoid repeating clang builds we can
still add an additional clang build to use the latest stable version of
clang which will typically be available on current distros.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We test with both gcc and clang in order to detect cases
where clang issues warnings that gcc misses. To achieve
this though we don't need to build QEMU in multiple
different configurations. Just a single clang-on-linux
build will be sufficient, if we have an "all enabled"
config.
This cuts the number of build jobs from 21 to 16,
reducing the load imposed on shared Travis CI infra.
This will make it practical to enable jobs for other
interesting & useful configurations without DOS'ing
Travis to much.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As it seems easy to break the ThreadSanitizer build we should defend it to
ensure that fixes get applied when it breaks. We use the Ubuntu GCC PPA
to get the latest GCC goodness.
As we need to use the -fuse-ld=gold work around we have to disable the
linux-user targets as these trip up the linker.
The make check run is also disabled for Travis but this can be
re-enabled once the check targets have been fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-13-alex.bennee@linaro.org>
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On travis-ci.org, all builds fail with
/usr/include/features.h:324:11: error: unable to open bits/predefs.h
With "make docker-travis@ubuntu", they fail with
/usr/include/features.h:374:13: error: unable to open sys/cdefs.h
With "make docker-travis@fedora", finally, they fail due to sparse
not being able to parse some #pragmas in glib headers. Just kill
the thing from the CI builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: tweak title for my OCD]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we want to run our docker based tests we'll need to do them on a
normal VM with docker support. Lets just enable the build on trusty for
now to check against a newer Ubuntu.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
