Add a new chardev backend which allows D-Bus client to handle the
chardev stream & events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to use direct connections instead of via the bus. Clients
are accepted with QMP add_client.
This allows to provide the D-Bus display without a bus. It also
simplifies the testing setup (some CI have issues to setup a D-Bus bus
in a container).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The "dbus" display backend exports the QEMU consoles and other
UI-related interfaces over D-Bus.
By default, the connection is established on the session bus, but you
can specify a different bus with the "addr" option.
The backend takes the "org.qemu" service name, while still allowing
further instances to queue on the same name (so you can lookup all the
available instances too). It accepts any number of clients at this
point, although this is expected to evolve with options to restrict
clients, or only accept p2p via fd passing.
The interface is intentionally very close to the internal QEMU API,
and can be introspected or interacted with busctl/dfeet etc:
$ ./qemu-system-x86_64 -name MyVM -display dbus
$ busctl --user introspect org.qemu /org/qemu/Display1/Console_0
org.qemu.Display1.Console interface - - -
.RegisterListener method h - -
.SetUIInfo method qqiiuu - -
.DeviceAddress property s "pci/0000/01.0" emits-change
.Head property u 0 emits-change
.Height property u 480 emits-change
.Label property s "VGA" emits-change
.Type property s "Graphic" emits-change
.Width property u 640 emits-change
[...]
See the interfaces XML source file and Sphinx docs for the generated API
documentations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add the SGXEPCSection list into SGXInfo to show the multiple
SGX EPC sections detailed info, not the total size like before.
This patch can enable numa support for 'info sgx' command and
QMP interfaces. The new interfaces show each EPC section info
in one numa node. Libvirt can use QMP interface to get the
detailed host SGX EPC capabilities to decide how to allocate
host EPC sections to guest.
(qemu) info sgx
SGX support: enabled
SGX1 support: enabled
SGX2 support: enabled
FLC support: enabled
NUMA node #0: size=67108864
NUMA node #1: size=29360128
The QMP interface show:
(QEMU) query-sgx
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 67108864}, {"node": 1, "size": 29360128}], "flc": true}}
(QEMU) query-sgx-capabilities
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 17070817280}, {"node": 1, "size": 17079205888}], "flc": true}}
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In terms of scope, die-id should mean "the die number within
socket the CPU belongs to" instead of "the die number within
node/board the CPU belongs to". Fix it to avoid confusing
the Doc reader.
Fixes: 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211122032651.16064-1-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new boolean 'kernel-hashes' option on the sev-guest object.
It will be used to to decide whether to add the hashes of
kernel/initrd/cmdline to SEV guest memory when booting with -kernel.
The default value is 'off'.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The work in merge commit e86e00a249 lacks special feature flag
'unstable', because it raced with it. Add it where it's missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211109145559.2122827-1-armbru@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Modern way is using blockdev-add + blockdev-backup, which provides a
lot more control on how target is opened.
As example of drive-backup problems consider the following:
User of drive-backup expects that target will be opened in the same
cache and aio mode as source. Corresponding logic is in
drive_backup_prepare(), where we take bs->open_flags of source.
It works rather bad if source was added by blockdev-add. Assume source
is qcow2 image. On blockdev-add we should specify aio and cache options
for file child of qcow2 node. What happens next:
drive_backup_prepare() looks at bs->open_flags of qcow2 source node.
But there no BDRV_O_NOCAHE neither BDRV_O_NATIVE_AIO: BDRV_O_NOCAHE is
places in bs->file->bs->open_flags, and BDRV_O_NATIVE_AIO is nowhere,
as file-posix parse options and simply set s->use_linux_aio.
The documentation is updated in a minimal way, so that drive-backup is
noted only as a deprecated command, and blockdev-backup used in most of
places.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
commit f78d4ed701 has fixed qemu tag, making 'sample-pages' option tag
involved by accident, which introduced since 6.1 in commit 7afa08cd8f.
revert this line.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The single backtick markup in ReST is the "default role". Currently,
Sphinx's default role is called "content". Sphinx suggests you can use
the "Any" role instead to turn any single-backtick enclosed item into a
cross-reference.
This is useful for things like autodoc for Python docstrings, where it's
often nicer to reference other types with `foo` instead of the more
laborious :py:meth:`foo`. It's also useful in multi-domain cases to
easily reference definitions from other Sphinx domains, such as
referencing C code definitions from outside of kerneldoc comments.
Before we do that, though, we'll need to turn all existing usages of the
"content" role to inline verbatim markup wherever it does not correctly
resolve into a cross-refernece by using double backticks instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211004215238.1523082-2-jsnow@redhat.com>
The patchset merged in 71864eadd9 ("migration/dirtyrate:
introduce struct and adjust DirtyRateStat") was targeting
QEMU 6.1 but got merged later, so correct the tag for 6.2.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info irq" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info ramblock" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info rdma" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info numa" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info profile" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info roms" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This provides a foundation on which to convert simple HMP commands to
use QMP. The QMP implementation will generate formatted text targeted
for human consumption, returning it in the HumanReadableText data type.
The HMP command handler will simply print out the formatted string
within the HumanReadableText data type. Since this will be an entirely
formulaic action in the case of HMP commands taking no arguments, a
custom command handler is provided.
Thus instead of registering a 'cmd' callback for the HMP command, a
'cmd_info_hrt' callback is provided, which will simply be a pointer
to the QMP implementation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit d7ddd0a161 ("linux-aio: limit the batch size using
`aio-max-batch` parameter") added a way to limit the batch size
of Linux AIO backend for the entire AIO context.
The same AIO context can be shared by multiple devices, so
latency-sensitive devices may want to limit the batch size even
more to avoid increasing latency.
For this reason we add the `aio-max-batch` option to the file
backend, which will be used by the next commits to limit the size of
batches including requests generated by this device.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-2-sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VMDK files support an attribute that represents the version of the guest
tools that are installed on the disk.
This attribute is used by vSphere before a machine has been started to
determine if the VM has the guest tools installed.
This is important when configuring "Operating system customizations" in
vSphere, as it checks for the presence of the guest tools before
allowing those customizations.
Thus when the VM has not yet booted normally it would be impossible to
customize it, therefore preventing a customized first-boot.
The attribute should not hurt on disks that do not have the guest tools
installed and indeed the VMware tools also unconditionally add this
attribute.
(Defaulting to the value "2147483647", as is done in this patch)
Signed-off-by: Thomas Weißschuh <thomas.weissschuh.ext@zeiss.com>
Message-Id: <20210913130419.13241-1-thomas.weissschuh.ext@zeiss.com>
[hreitz: Added missing '#' in block-core.json]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
introduce dirty-bitmap mode as the third method of calc-dirty-rate.
implement dirty-bitmap dirtyrate calculation, which can be used
to measuring dirtyrate in the absence of dirty-ring.
introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to
indicate dirty bitmap method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
use dirty ring feature to implement dirtyrate calculation.
introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.
introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce "DirtyRateMeasureMode" to specify what method should be
used to calculate dirty rate, introduce "DirtyRateVcpu" to store
dirty rate for each vcpu.
use union to store stat data of specific mode
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <661c98c40f40e163aa58334337af8f3ddf41316a.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
New option parameters unstable-input and unstable-output set policy
for unstable interfaces just like deprecated-input and
deprecated-output set policy for deprecated interfaces (see commit
6dd75472d5 "qemu-options: New -compat to set policy for deprecated
interfaces"). This is intended for testing users of the management
interfaces. It is experimental.
For now, this covers only syntactic aspects of QMP, i.e. stuff tagged
with feature 'unstable'. We may want to extend it to cover semantic
aspects, or the command line.
Note that there is no good way for management application to detect
presence of these new option parameters: they are not visible output
of query-qmp-schema or query-command-line-options. Tolerable, because
it's meant for testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc comments fixed up]
The code to check policy for handling deprecated input is triplicated.
Factor it out into compat_policy_input_ok() before I mess with it in
the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211028102520.747396-9-armbru@redhat.com>
[Policy code moved from qmp-dispatch.c to qapi-util.c to make visitors
link without qmp-dispatch.o]
The code to check enumeration value policy can see special feature
flag 'deprecated' in QEnumLookup member flags[value]. I want to make
feature flag 'unstable' visible there as well, so I can add policy for
it.
Instead of extending flags[], replace it by @special_features (a
bitset of QapiSpecialFeature), because that's how special features get
passed around elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The code to check command policy can see special feature flag
'deprecated' as command flag QCO_DEPRECATED. I want to make feature
flag 'unstable' visible there as well, so I can add policy for it.
To let me make it visible, add member @special_features (a bitset of
QapiSpecialFeature) to QmpCommand, and adjust the generator to pass it
through qmp_register_command(). Then replace "QCO_DEPRECATED in
@flags" by QAPI_DEPRECATED in @special_features", and drop
QCO_DEPRECATED.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-7-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The generated visitor functions call visit_deprecated_accept() and
visit_deprecated() when visiting a struct member with special feature
flag 'deprecated'. This makes the feature flag visible to the actual
visitors. I want to make feature flag 'unstable' visible there as
well, so I can add policy for it.
To let me make it visible, replace these functions by
visit_policy_reject() and visit_policy_skip(), which take the member's
special features as an argument. Note that the new functions have the
opposite sense, i.e. the return value flips.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211028102520.747396-6-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Unbreak forward visitor]
Add special feature 'unstable' everywhere the name starts with 'x-',
except for InputBarrierProperties member x-origin and
MemoryBackendProperties member x-use-canonical-path-for-ramblock-id,
because these two are actually stable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-3-armbru@redhat.com>
This copies the code implementing the policy from qapi/qmp-dispatch.c
to qapi/qobject-input-visitor.c. Tolerable, but if we acquire more
copies, we should look into factoring them out.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-5-armbru@redhat.com>
The next commit needs to access compat policy from the generic visitor
core. Move it there from qobject input and output visitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-4-armbru@redhat.com>
This is quite similar to commit 84ab008687 "qapi: Add feature flags to
struct members", only for enums instead of structs.
Special feature flag 'deprecated' is silently ignored there. This is
okay only because it will be implemented shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The next commit will add feature flags to enum members. There's a
problem, though: query-qmp-schema shows an enum type's members as an
array of member names (SchemaInfoEnum member @values). If it showed
an array of objects with a name member, we could simply add more
members to these objects. Since it's just strings, we can't.
I can see three ways to correct this design mistake:
1. Do it the way we should have done it, plus compatibility goo.
We want a ['SchemaInfoEnumMember'] member in SchemaInfoEnum. Since
changing @values would be a compatibility break, add a new member
@members instead.
@values is now redundant. In my testing, output of
qemu-system-x86_64's query-qmp-schema grows by 11% (18.5KiB).
We can deprecate @values now and drop it later. This will break
outmoded clients. Well-behaved clients such as libvirt are
expected to break cleanly.
2. Like 1, but omit "boring" elements of @member, and empty @member.
@values does not become redundant. @members augments it. Somewhat
cumbersome, but output of query-qmp-schema grows only as we make
enum members non-boring.
There is nothing to deprecate here.
3. Versioned query-qmp-schema.
query-qmp-schema provides either @values or @members. The QMP
client can select which version it wants. There is no redundant
output.
We can deprecate old versions and eventually drop them. This will
break outmoded clients. Breaking cleanly is easier than for 1.
While 1 and 2 operate within the common rules for compatible
evolution apply (section "Compatibility considerations" in
docs/devel/qapi-code-gen.rst), 3 bypasses them. Attractive when
operating within the rules is just too awkward. Not the case here.
This commit implements 1. Libvirt developers prefer it.
Deprecate @values in favour of @members. Since query-qmp-schema
compatibility is pretty fundamental for management applications, an
extended grace period is advised.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The error message claims the parameter is invalid:
$ qemu-system-x86_64 -object qom-type=nonexistent
qemu-system-x86_64: -object qom-type=nonexistent: Invalid parameter 'nonexistent'
What's wrong is actually the *value* 'nonexistent'. Improve the
message to
qemu-system-x86_64: -object qom-type=nonexistent: Parameter 'qom-type' does not accept value 'nonexistent'
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/608
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211020180231.434071-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Like we already do for -object, introduce support for JSON syntax in
-device, which can be kept stable in the long term and guarantees that a
single code path with identical behaviour is used for both QMP and the
command line. Compared to the QemuOpts based code, the parser contains
less surprises and has support for non-scalar options (lists and
structs). Switching management tools to JSON means that we can more
easily change the "human" CLI syntax from QemuOpts to the keyval parser
later.
In the QAPI schema, a feature flag is added to the device-add command to
allow management tools to detect support for this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211008133442.141332-16-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the ObjectType entries already depend on CONFIG_* switches.
Some others also only make sense with certain configurations, but
are currently always listed in the ObjectType enum. Let's make them
depend on the correpsonding CONFIG_* switches, too, so that upper
layers (like libvirt) have a better way to determine which features
are available in QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210928160232.432980-1-thuth@redhat.com>
[Do the same for MemoryBackendEpcProperties. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is already a section with various SEV commands / types,
so move the SEV guest attestation together.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007161716.453984-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap long lines before 70 characters for legibility.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007161716.453984-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we might not always have a device id, it is impossible to always
match MEMORY_DEVICE_SIZE_CHANGE events to an actual device. Let's
include the qom-path in the event, which allows for reliable mapping of
events to devices.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210929162445.64060-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several QGA definitions omit a blank line after the symbol
declaration. This works OK currently, but it's the only place where we
do this. Adjust it for consistency.
Future commits may wind up enforcing this formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
