Commit Graph

10852 Commits

Author SHA1 Message Date
Mian M. Hamayun
4d9ebf751a hw/arm/boot: Add boot support for AArch64 processor
This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placeholders for Board-ID
that are used to implement uniform indexing across different bootloaders.

Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-7-git-send-email-peter.maydell@linaro.org
[PMM:
 * updated to use ARMInsnFixup style bootloader fragments
 * dropped virt.c additions
 * use runtime checks for "is this an AArch64 core" rather than ifdefs
 * drop some unnecessary setting of registers in reset hook
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17 19:42:30 +00:00
Peter Maydell
47b1da8134 hw/arm/boot: Allow easier swapping in of different loader code
For AArch64 we will obviously require a different set of
primary and secondary boot loader code fragments. However currently
we hardcode the offsets into the loader code where we must write
the entrypoint and other data into arm_load_kernel(). This makes it
hard to substitute a different loader fragment, so switch to a more
flexible scheme where instead of a raw array of instructions we use
an array of (instruction, fixup-type) pairs that indicate which
words need special action or data written into them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2013-12-17 19:42:30 +00:00
Peter Crosthwaite
e2cddeeb97 arm/highbank.c: Fix MPCore periphbase name
GIC_BASE_ADDR is not the base address of the GIC. Its clear from the
code that this is the base address of the MPCore. Rename to
MPCORE_PERIPHBASE accordingly.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:29 +00:00
Peter Crosthwaite
c25771281e arm/xilinx_zynq: Implement CBAR initialisation
Fix the CBAR initialisation by using the newly defined static property.
Zynq will now correctly init the CBAR to the SCU base address.

Needed to boot Linux on the xilinx_zynq machine model.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8db7d57ebe5418fed397fcc86ea719f98446c178.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:29 +00:00
Peter Crosthwaite
d8bbdcf8d6 arm/xilinx_zynq: Use object_new() rather than cpu_arm_init()
To allow the machine model to set device properties before CPU
realization.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: e57658b4506b26ab6b6fadbe6d7827f669f51895.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Peter Crosthwaite
c0f1ead985 arm/highbank: Fix CBAR initialisation
Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.

So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---

Which disappears with this patch.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Peter Crosthwaite
f282f29626 arm/highbank: Use object_new() rather than cpu_arm_init()
To allow the machine model to set device properties before CPU
realization.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8c671e500390c8be0cc363e887e32867d1d1b0d2.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Roy Franz
0163a2dc80 Fix NOR flash device ID reading
Fix NOR flash manufacturer and device ID reading.  This now
properly takes into account device widths and device max widths
as required.  The reading of these IDs uses the same max_width
dependent addressing as CFI queries.

The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate.  The existing code seems very broken.

Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.

The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
4433e660e3 Fix CFI query responses for NOR flash
This change fixes the CFI query responses to handle NOR device
widths that are different from the bank width.  Support is also
added for multi-width devices in a x8 configuration.  This is
typically x8/x16 devices, but the CFI specification mentions
x8/x32 devices so those should be supported as well if they
exist.
The query response data is now replicated per-device in the bank,
and is adjusted for x16 or x32 parts configured in x8 mode.

The existing code is left in place for boards that have not
been updated to specify an explicit device_width.  The VExpress
board has been updated in an earlier patch in this series so
this is the only board currently affected.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org
[PMM: fixed a few formatting nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
fa21a7b13e Add max device width parameter for NOR devices
For handling CFI and device ID reads, we need to not only know the
width that a NOR flash device is configured for, but also its maximum
width.  The maximum width addressing mode is used for multi-width
parts no matter which width they are configured for.  The most common
case is x16 parts that also support x8 mode.  When configured for x8
operation these devices respond to CFI and device ID requests differently
than native x8 NOR parts.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org
[PMM: Added comment explaining the semantics of width vs device-width
 vs max-device-width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
b8433303fb Set proper device-width for vexpress flash
Create vexpress specific pflash registration
function which properly configures the device-width
of 16 bits (2 bytes) for the NOR flash on the
vexpress platform.  This change is required for
buffered flash writes to work properly.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-5-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Roy Franz
2003889f67 return status for each NOR flash device
Now that we know how wide each flash device that makes up the bank is,
return status for each device in the bank.  Leave existing code
that treats 32 bit wide banks as composed of two 16 bit devices as otherwise
we may break configurations that do not set the device_width propery.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Roy Franz
1997b48527 Add device-width property to pflash_cfi01
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes.  This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Roy Franz
4b6fedcac0 rename pflash_t member width to bank_width
Rename the 'width' member of the pflash_t structure
in preparation for adding a bank_width member.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386279359-32286-2-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Gerd Hoffmann
75c70e37bc spice: stop server for qxl hard reset
Hard reset can happen at any time.  We should be able to put qxl into a
known-good state no matter what.  Stop spice server thread for reset so
it can't be confused by fetching stale commands lingering around in the
rings while we reset is ongoing.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16 10:12:20 +01:00
Anthony Liguori
e157b8fdd4 Merge remote-tracking branch 'bonzini/virtio' into staging
# By Andreas Färber (18) and Paolo Bonzini (12)
# Via Paolo Bonzini
* bonzini/virtio: (30 commits)
  virtio: Convert exit to unrealize
  virtio: Complete converting VirtioDevice to QOM realize
  virtio-scsi: Convert to QOM realize
  virtio-rng: Convert to QOM realize
  virtio-balloon: Convert to QOM realize
  virtio-net: Convert to QOM realize
  virtio-serial: Convert to QOM realize
  virtio-blk: Convert to QOM realize
  virtio-9p: Convert to QOM realize
  virtio: Start converting VirtioDevice to QOM realize
  virtio-scsi: QOM realize preparations
  virtio-rng: QOM realize preparations
  virtio-balloon: QOM realize preparations
  virtio-net: QOM realize preparations
  virtio-serial: QOM realize preparations
  virtio-blk: QOM realize preparations
  virtio-9p: QOM realize preparations
  virtio-blk-dataplane: Improve error reporting
  virtio-pci: add device_unplugged callback
  virtio-rng: switch exit callback to VirtioDeviceClass
  ...
2013-12-13 11:10:33 -08:00
Anthony Liguori
5d0e2280cc acpi.pci,pc,memory core fixes
Most notably this includes changes to exec to support
 full 64 bit addresses.
 
 This also flushes out patches that got queued during 1.7 freeze.
 There are new tests, and a bunch of bug fixes all over the place.
 There are also some changes mostly useful for downstreams.
 
 I'm also listing myself as pc co-maintainer. I'm doing this reluctantly,
 but this seems to be necessary to make sure patches are not lost or delayed too
 much, and posting the MAINTAINERS patch did not seem to make anyone else
 volunteer.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSqK0/AAoJECgfDbjSjVRpz0wH/2BCUmgQ8oZfe9PrRhdCpYbw
 6RtDLVucIUNq3CYfeV+Lua1Dw62CPVNGUR1Y2sk9s5X0C/lHLXeUkZxYy0JezGmW
 k0EZAcVC4kXqyPbVh83I2pKtTwLGfI6I1qzsLZc+6CDT34YN7Lwe+wRJXQQNGcJc
 gEbe4U8xuufdPZO2zv9RWEwmI4tI38PxnDJw+MYNJOKNnweLBRKq10YEKrref7Ml
 4O1GxAXfQd0wkAhr9Cm7ZBajOzy/ovLj/b7HmiCMOvGkOaVhzurqbOtxlsbVIF9T
 26+HEhu+2H/NO4qk5VmZjSngayUySBdEbGLHiovd8Xl4zMFPFNfQXv1mR3Vzb20=
 =GPZ/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

acpi.pci,pc,memory core fixes

Most notably this includes changes to exec to support
full 64 bit addresses.

This also flushes out patches that got queued during 1.7 freeze.
There are new tests, and a bunch of bug fixes all over the place.
There are also some changes mostly useful for downstreams.

I'm also listing myself as pc co-maintainer. I'm doing this reluctantly,
but this seems to be necessary to make sure patches are not lost or delayed too
much, and posting the MAINTAINERS patch did not seem to make anyone else
volunteer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 11 Dec 2013 10:21:51 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (14) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (28 commits)
  pc: use macro for HPET type
  hpet: fix build with CONFIG_HPET off
  acpi unit-test: adjust the test data structure for better handling
  acpi unit-test: load and check facs table
  exec: separate sections and nodes per address space
  memory.c: bugfix - ref counting mismatch in memory_region_find
  hpet: enable to entitle more irq pins for hpet
  hpet: inverse polarity when pin above ISA_NUM_IRQS
  pci: fix pci bridge fw path
  ACPI DSDT: Make control method `IQCR` serialized
  acpi: strip compiler info in built-in DSDT
  acpi unit-test: verify signature and checksum
  smbios: Set system manufacturer, product & version by default
  exec: reduce L2_PAGE_SIZE
  exec: make address spaces 64-bit wide
  exec: memory radix tree page level compression
  exec: pass hw address to phys_page_find
  exec: extend skip field to 6 bit, page entry to 32 bit
  exec: replace leaf with skip
  split definitions for exec.c and translate-all.c radix trees
  ...

Message-id: cover.1386786228.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-13 11:10:20 -08:00
Anthony Liguori
bf6e3cc4fa Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  help: add id suboption to -iscsi
  scsi-disk: fix WRITE SAME with large non-zero payload
  block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
  scsi-disk: fix VERIFY emulation
  scsi-bus: fix transfer length and direction for VERIFY command

Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-13 11:10:02 -08:00
Michael S. Tsirkin
511161027a pc: use macro for HPET type
avoid hard-coding strings

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:10 +02:00
Michael S. Tsirkin
142e0950cf hpet: fix build with CONFIG_HPET off
make hpet_find inline so we don't need
to build hpet.c to check if hpet is enabled.

Fixes link error with CONFIG_HPET off.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:10 +02:00
Liu Ping Fan
7a10ef51c2 hpet: enable to entitle more irq pins for hpet
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.

On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.

Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:09 +02:00
Liu Ping Fan
0d63b2dd31 hpet: inverse polarity when pin above ISA_NUM_IRQS
According to hpet spec, hpet irq is high active. But according to
ICH spec, there is inversion before the input of ioapic. So the OS
will expect low active on this IRQ line. (On bare metal, if OS driver
claims high active on this line, spurious irq is generated)

We fold the emulation of this inversion inside the hpet logic.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:08 +02:00
Gerd Hoffmann
4c41425d2e pci: fix pci bridge fw path
qemu uses "pci" as name for pci bridges in the firmware device path.
seabios expects "pci-bridge".  Result is that bootorder is broken for
devices behind pci bridges.

Some googling suggests that "pci-bridge" is the correct one.  At least
PPC-based Apple machines are using this.  See question "How do I boot
from a device attached to a PCI card" here:
	http://www.netbsd.org/ports/macppc/faq.html

So lets change qemu to use "pci-bridge" too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:08 +02:00
Anthony Liguori
b9aad5d68d Merge remote-tracking branch 'stefanha/net-next' into staging
# By Vincenzo Maffione (2) and others
# Via Stefan Hajnoczi
* stefanha/net-next:
  net: Update netdev peer on link change
  virtio-net: don't update mac_table in error state
  MAINTAINERS: Add netmap maintainers
  net: Adding netmap network backend

Message-id: 1386594692-21278-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-10 16:14:20 -08:00
Anthony Liguori
1ead3ed555 target-arm queue:
* support REFCNT register on integrator/cp board
  * implement the A9MP's global timer
  * add the 'virt' platform
  * support '-cpu host' on KVM/ARM
  * Cadence GEM ethernet device bugfixes
  * Implement 32-bit ARMv8 VSEL, VMAXNM, VMINNM
  * fix TTBCR write masking
  * update 32 bit decoder to use new qemu_ld/st TCG opcodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJSpyOJAAoJEDwlJe0UNgze2rYP/REOCQSq6nYvo4nmfi3e7aRv
 egQ5YE6gt76wTySHIhaHLsy5r/MPecJphrxnPVMVVJzP7Y0WsAoOtXsR5NEqSEp5
 BJhvjFcKQXyyibwmv6eZ/SA6uHbRHE7pHQqp6S8IG1msIKZsr4/8HoYs8vidUq88
 BgRo0yYnRBMlsH6qgDjX43tZehvJLooCi9b3vDq6ChdawvB1I/3Dj6ydKYqDhYLV
 svci0lbBa6Bw555hBBXiBVmhzKQ//HHMjAuPFaynhmewmbY/Lr2mWXev5sNGfhMQ
 TgyJhT5V/169OYaNuJN/aC7Ubrq4e2UoCk2NJjnSAxgXCxQoCNB7ofSy7UyeU+2V
 TYYqYkYHvRurb4D1kkMf5pL+LTtNL7+HzcqjcGp0ntNcTaJi8InRLZMIi7LXlUWl
 MbYY3CuuspniAuWC4tmhp3Vl5hA5L/tL0JV75WStON9J/GoH9RmKISvS5Etr29A/
 nZrRULuCy+egCTyTwIAxh7vdA/7sNZizuM7eq2d28zFvvxIJa9HhLiy9dBt/Whfm
 yqrA/o0w4xidEtmFwfSTxOVPPGMwumGsq0harCrElDoWqvTk7bBkRJfPj4pDkEP5
 Jpo1SVz63KeEuDxYqjlUM02Zz8+gi8jmzZqUQXWOWnjWLj+Ne8PZPuqJW7U44p4J
 sr3+2rTV6p0pX1/kvG95
 =KCVi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20131210' into staging

target-arm queue:
 * support REFCNT register on integrator/cp board
 * implement the A9MP's global timer
 * add the 'virt' platform
 * support '-cpu host' on KVM/ARM
 * Cadence GEM ethernet device bugfixes
 * Implement 32-bit ARMv8 VSEL, VMAXNM, VMINNM
 * fix TTBCR write masking
 * update 32 bit decoder to use new qemu_ld/st TCG opcodes

# gpg: Signature made Tue 10 Dec 2013 06:22:01 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Crosthwaite (16) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20131210: (37 commits)
  target-arm: fix TTBCR write masking
  target-arm: Use new qemu_ld/st opcodes
  target-arm: Implement ARMv8 SIMD VMAXNM and VMINNM instructions.
  target-arm: Implement ARMv8 FP VMAXNM and VMINNM instructions.
  softfloat: Add minNum() and maxNum() functions to softfloat.
  softfloat: Remove unused argument from MINMAX macro.
  target-arm: Implement ARMv8 VSEL instruction.
  target-arm: Move call to disas_vfp_insn out of disas_coproc_insn.
  net/cadence_gem: Don't rx packets when no rx buffer available
  net/cadence_gem: Improve can_receive debug printfery
  net/cadence_gem: Fix register w1c logic
  net/cadence_gem: Fix small packet FCS stripping
  net/cadence_gem: Fix rx multi-fragment packets
  net/cadence_gem: Add missing VMSTATE_END_OF_LIST
  net/cadence_gem: Implement SAR (de)activation
  net/cadence_gem: Implement SAR match bit in rx desc
  net/cadence_gem: Implement RX descriptor match mode flags
  net/cadence_gem: Prefetch rx descriptors ASAP
  net/cadence_gem: simplify rx buf descriptor walking
  net/cadence_gem: Don't assert against 0 buffer address
  ...

Message-id: 1386686613-2390-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-10 16:13:32 -08:00
Anthony Liguori
b5527dad7d Change audio wakeup rate from 250 Hz to 100 Hz.
Emulation bugfixes for intel-hda and adlib.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSpc3gAAoJEEy22O7T6HE4D6IQAKHNCUutcopMEcHJwkldpHqO
 uEVdNJvX91ZlgNGOWHtfqzMjRLftZVrY4XHL/D0H/LqXDeShXaT2Kz+6OOKDIDXi
 KOchgKf2w3/lbuVtKv3xQSPt2A7TdgJFmfPpbn8f4I6tq6NrTP2TVodOyLc4RF8U
 tfo+RDzZIQC5fsBFK284Ngk0abaTpRfWcNpccPh2FXznbCcgt5RiRW1bDPbjLRKD
 6QoRyZsyEHAqap49YTSzW7HQFJzSsQX48Oo+FQPU/B81kUYEL7F9sSCam3NpNkoZ
 xugn35cavGyYJE2kBmAYj/fMp4fdug8O9P/RZV6GxpDsA7OKimjq7xUxjYS+KtFB
 0zdd4ToeheJK7t85kKh2xe30xVIYjffIqwg91LJrFJmlvqbgPKR/K+aY+pVVOKv6
 S7lJscFJuBMPAxteb0ajuKZQmaK6P5LC1ckcJSsKPVehqQMzxTYdD9wsv6NN4tRk
 ZHDVZEitV+u97fWj/fGjxWPuSMBQwwlbmjyBCn4TOL1iNqdeaW30bLafKBZhdXb9
 iUaYMkCWI9dOtMYhkzyIAfPfJCdaMMf12ML+2zEskjll45R8lf+takHXnbeIr8oO
 YSe5hWdZzHCdosCOtRJB9UmzbY+EmycsFpsIPsEnSE9Tfg0CXfjnowOGveZ4ikff
 UZwqKbNaOAOTpmxM9SV8
 =zExI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-audio-1' into staging

Change audio wakeup rate from 250 Hz to 100 Hz.
Emulation bugfixes for intel-hda and adlib.

# gpg: Signature made Mon 09 Dec 2013 06:04:16 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

# By Gerd Hoffmann (2) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-audio-1:
  intel-hda: fix position buffer
  adlib: fix patching of port I/O addresses
  audio: adjust pulse to 100Hz wakeup rate
  audio: Lower default wakeup rate to 100 times / second

Message-id: 1386597974-26506-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-10 16:11:21 -08:00
Peter Crosthwaite
8202aa5391 net/cadence_gem: Don't rx packets when no rx buffer available
Return false from can_receive() when no valid buffer descriptor is
available. Ensures against mass packet droppage in some applications.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cde00ef774e84e2586bf10fd37b542f75bf36cfb.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
3ae5725f86 net/cadence_gem: Improve can_receive debug printfery
Currently this just floods indicating that can_receive has been called
by the net framework. Instead, save the result of the most recent
can_receive callback as state and only print a message if the result
changes (indicating some sort of actual state change in GEM). Make said
debug message more meaningful as well.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2eb74ca6a5756aea242d9f525961db95d6cfcf2c.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
e2314fda62 net/cadence_gem: Fix register w1c logic
This write-1-clear logic was incorrect. It was always clearing w1c
bits regardless of whether the written value was 1 or not. i.e. it
was implementing a write-anything-to-clear strategy.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ed905b04d3343966ded425f06aa2224bc7a35b59.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
191946c51f net/cadence_gem: Fix small packet FCS stripping
The minimum packet size is 64, however this is before FCS stripping
occurs. So when FCS stripping the minimum packet size is 60. Fix.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 8aac5bd737f9cf48b87f32943d7eb5939061e546.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
3057069802 net/cadence_gem: Fix rx multi-fragment packets
Bytes_to_copy was being updated before its final use where it
advances the rx buffer pointer. This was causing total mayhem,
where packet data for any subsequent fragments was being fetched
from the wrong place.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: c2a1c65c1fd06eb274442a0fa4a6839d940e145e.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
17cf2c76b6 net/cadence_gem: Add missing VMSTATE_END_OF_LIST
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 8f8c2bfb15f40fb5f0d5766aa4cd3d54c596de6a.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
64eb930176 net/cadence_gem: Implement SAR (de)activation
The Specific address registers can be enabled or disabled by software.
QEMU was assuming they were always enabled. Implement the
disable/enable feature. SARs are disabled by writing to the lower half
register. They are re-enabled by then writing the upper half.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 49efd1f7450af8f980b967d3054245bae137866c.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
a03f742983 net/cadence_gem: Implement SAR match bit in rx desc
Bit 27 of the RX buffer desc word 1 should be set when the packet was
accepted due to specific address register match. Implement.

This feature is absent from the Xilinx documentation (UG585) but the
behaviour is tested as accurate on real hardware.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7e3f26fc4ab244e8123efc12723e7164730abdcb.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
63af1e0cff net/cadence_gem: Implement RX descriptor match mode flags
The various Rx packet address matching mode flags were not being set in
the rx descriptor. Implement.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 6002a24a6a8ceaa11d3009ab5392840d1c084b28.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
06c2fe951d net/cadence_gem: Prefetch rx descriptors ASAP
The real hardware prefetches rx buffer descriptors ASAP and
potentially throws relevant interrupts following the fetch
even in the absence of a received packet.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 41629e35edfdb1f02f1e401f2c3d0e2e4c9e44b3.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
7cfd65e41c net/cadence_gem: simplify rx buf descriptor walking
There was a replication of the rx descriptor address walking logic.
Reorder the flow control to remove. This refactoring also obsoletes
the local variables packet_desc_addr and last_desc_addr.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2a425b457ff0b57274bf206ad2236690cd7f5909.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Peter Crosthwaite
11785f5352 net/cadence_gem: Don't assert against 0 buffer address
This has no real hardware analog and asserting correctness of DMA
addresses is not a perhiperal level problem. Delete.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fc02417eb1874cb05e4f20531c6203c5a00110f1.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:50 +00:00
Edgar E. Iglesias
3b2c97f991 net/cadence_gem: Update DMA rx descriptors as we process them
We were updating the ownership bit of all descriptors if packets
get split and written through several descriptors.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d61b7847b51487118783c93765a485bc5c66d272.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:49 +00:00
Peter Crosthwaite
24e822ea46 net/cadence_gem: Implement mac level loopback mode
Cadence GEM has a MAC level loopback mode. Implement. Use the same basic
operation as the already implemented PHY loopback.

Reported-by: Deepika Dhamija <deepika@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3a0baf1b6b2fc1be638bdf1a37408ec38988e970.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:49 +00:00
Peter Maydell
198aa06459 hw/arm/virt: Support -cpu host
Support -cpu host in virt machine (treating it like an A15, ie
with a GIC v2 and the A15's private peripherals.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-12-git-send-email-peter.maydell@linaro.org
2013-12-10 13:28:49 +00:00
Peter Maydell
f5fdcd6e58 hw/arm: Add 'virt' platform
Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
 Significantly overhauled:
 * renamed user-facing machine to just "virt"
 * removed the A9 support (it can't work since the A9 has no
   generic timers)
 * added virtio-mmio transports instead of random set of 'soc' devices
   (though we retain a pl011 UART)
 * instead of updating io_base as we step through adding devices,
   define a memory map with an array (similar to vexpress)
 * similarly, define irqmap with an array
 * folded in some minor fixes from John's aarch64-support patch
 * rather than explicitly doing endian-swapping on FDT cells,
   use fdt APIs that let us just pass in host-endian values
   and let the fdt layer take care of the swapping
 * miscellaneous minor code cleanups and style fixes
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:30 +00:00
John Rigby
0fb79851c3 hw/arm/boot: Allow boards to provide an fdt blob
If no fdt is provided on command line and the new field
get_dtb in struct arm_boot_info is set then call it to
get a device tree blob.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org
[PMM: minor tweaks and cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:30 +00:00
François LEGAL
57e72f2a19 cpu/a9mpcore: Add Global Timer
Add the global timer to A9 MPCore.

Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff92f35f438ac671b57d99d823723dd3e62d2c49.1385969450.git.peter.crosthwaite@xilinx.com
[PC Changes:
 * new commit message
 * split off original version as a separate patch
 * Rebased against new mpcore implementation (with struct embedding)
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:28:25 +00:00
Peter Crosthwaite
c21c3b53e1 hw/timer: Introduce ARM A9 Global Timer.
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.

Based on version contributed by Francois LEGAL.

Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
 * New commit message
 * Re-implemented as single timer model
 * Fixed backwards counting issue in polled mode
 * completed VMSD fields
 * macroified magic numbers (and headerified reg definitions)
 * split of as device-model-only patch
 * use bitops for 64 bit register access
 * Fixed auto increment mode to check condition properly
 * general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
 * minor typo fixes
 * added missing return after error_setg()
 * dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Peter Crosthwaite
4c25f365ab cpu/a9mpcore: reorder operations/declarations
To make it consistent for easier code reading. The order in which
variables are defined and functions are called is set to match the
address map ordering.

The new consistent order of doing stuff is:

SCU -> GIC -> MPTimer -> WDT.

0 functional change.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8f31398e6d9a93f57291399f269039da1a77a2b5.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Peter Crosthwaite
d3053e6be5 cpu/a9mpcore: rename timerbusdev variable
Rename this variable for consistency with the above defined mptimerdev
variable.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 28939ef95589a62414634e86c47cef76b21b15f7.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Jan Petrous
f53977f788 integrator/cp: add support for REFCNT register
Linux kernel from version 3.4 requires CM_REFCNT register for sched timer
for Integrator/CP board (integrator_defconfig).

See http://infocenter.arm.com/help/topic/com.arm.doc.dui0138e/ch04s06s11.html

Signed-off-by: Jan Petrous <jan.petrous@tieto.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Michael S. Tsirkin
6b9b440574 ACPI DSDT: Make control method IQCR serialized
Forward-port the following commit from seabios:

commit 995bbeef78b338370f426bf8d0399038c3fa259c
Author: Paul Menzel <paulepanter@users.sourceforge.net>
Date:   Thu Oct 3 11:30:52 2013 +0200

    The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the
    following warning.

            $ make
            […]
              Compiling IASL out/src/fw/acpi-dsdt.hex
            out/src/fw/acpi-dsdt.dsl.i    360:         Method(IQCR, 1, NotSerialized) {
            Remark   2120 -                                     ^ Control Method should be made Serialized (due to creation of named objects within)
            […]
            ASL Input:     out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords
            AML Output:    out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes
            Listing File:  out/src/fw/acpi-dsdt.lst - 143715 bytes
            Hex Dump:      out/src/fw/acpi-dsdt.hex - 41661 bytes

            Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations
            […]

    After changing the parameter from `NotSerialized` to `Serialized`, the
    remark is indeed gone and there is no size change.

    The remark was added in ACPICA version 20130517 [1] and gives the
    following explanation.

            If a thread blocks within the method for any reason, and another thread
            enters the method, the method will fail because an attempt will be
            made to create the same (named) object twice.

            In this case, issue a remark that the method should be marked
            serialized. ACPICA BZ 909.

    [1] ba84d0fc18

    Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>

Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10 13:29:22 +02:00
Michael S. Tsirkin
53db092ad1 acpi: strip compiler info in built-in DSDT
IASL stores it's revision in each table header it generates.
That's not nice since guests will see a change each time they move
between hypervisors.  We generally fill our own info for tables, but we
(and seabios) forgot to do this for the built-in DSDT.

Modifications in DSDT table:
 OEM ID:            "BXPC" -> "BOCHS "
 OEM Table ID:      "BXDSDT" -> "BXPCDSDT"
 Compiler ID:       "INTL" -> "BXPC"
 Compiler Version:  0x20130823 -> 0x00000001

Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10 13:29:22 +02:00