Commit Graph

312 Commits

Author SHA1 Message Date
Peter Lieven
3d2acaa308 block/iscsi: allow cluster_size of 4K and greater
depending on the target the opt_unmap_gran might be as low
as 4K. As we know use this also as a knob to activate the allocationmap
feature lower the barrier. The limit 4K (and not 512) is choosen
to avoid a potentially too big allocationmap.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-29 11:15:01 +02:00
Peter Lieven
5917af812e block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-29 11:14:41 +02:00
Peter Lieven
b03c38057b block/iscsi: speed up read for unallocated sectors
this patch implements a cache that tracks if a page on the
iscsi target is allocated or not. The cache is implemented in
a way that it allows for false positives
(e.g. pretending a page is allocated, but it isn't), but
no false negatives.

The cached allocation info is then used to speed up the
read process for unallocated sectors by issueing a GET_LBA_STATUS
request for all sectors that are not yet known to be allocated.
If the read request is confirmed to fall into an unallocated
range we directly return zeroes and do not transfer the
data over the wire.

Tests have shown that a relatively small amount of GET_LBA_STATUS
requests happens a vServer boot time to fill the allocation cache
(all those blocks are not queried again).

Not to transfer all the data of unallocated sectors saves a lot
of time, bandwidth and storage I/O load during block jobs or storage
migration and it saves a lot of bandwidth as well for any big sequential
read of the whole disk (e.g. block copy or speed tests) if a significant
number of blocks is unallocated.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-29 11:14:25 +02:00
Peter Lieven
dbe5c58f2a block/iscsi: allow fall back to WRITE SAME without UNMAP
if the iscsi driver receives a write zeroes request with
the BDRV_REQ_MAY_UNMAP flag set it fails with -ENOTSUP
if the iscsi target does not support WRITE SAME with
UNMAP. However, the BDRV_REQ_MAY_UNMAP is only a hint
and writing zeroes with WRITE SAME will still be
better than falling back to writing zeroes with WRITE16.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28 15:04:17 +02:00
Markus Armbruster
172fc4dd33 iscsi: Don't use error_is_set() to suppress additional errors
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.

Commit 24d3bd6 added a broken error path to iscsi_do_inquiry(): it
first calls error_setg(), then jumps to the preexisting error label,
where error_setg() gets called again, triggering an assertion failure.

Commit cbee81f fixed this by guarding the second error_setg() with an
error_is_set().

Replace this fix by a simpler and safer one: jump right behind the
second error_setg().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 18:05:06 +02:00
Kevin Wolf
98522f63f4 block: Add errp to bdrv_new()
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.

Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22 12:00:20 +02:00
Fam Zheng
cd82b6fb4d iscsi: Remember to set ret for iscsi_open in error case
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-11 13:59:49 +02:00
Fam Zheng
cbee81f6de iscsi: Don't set error if already set in iscsi_do_inquiry
This eliminates the possible assertion failure in error_setg().

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-04 14:11:34 +02:00
Paolo Bonzini
c97ca29db0 iscsi: always query max WRITE SAME length
Max WRITE SAME length is also used when the UNMAP bit is zero, so it
should be queried even if LBPWS=0.  Same for the optimal transfer
length.

However, the write_zeroes_alignment only matters for UNMAP=1 so we
still restrict it to LBPWS=1.

Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-03 13:10:53 +02:00
Paolo Bonzini
b2f9c08a4f iscsi: ignore flushes on scsi-generic devices
Non-block SCSI devices do not support flushing, but we may still send
them requests via bdrv_flush_all.  Just ignore them.

Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-03 13:10:45 +02:00
Paolo Bonzini
27898a5daa iscsi: recognize "invalid field" ASCQ from WRITE SAME command
Some targets may return "invalid field" as the ASCQ from WRITE SAME
if they support the command only without the UNMAP field.  Recognize
that, and return ENOTSUP just like for "invalid operation code".

Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-03 13:10:32 +02:00
Kevin Wolf
f47c3f5a80 iscsi: Use bs->sg for everything else than disks
The current iscsi block driver code makes the rather arbitrary decision
that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all
other device types are disks.

Instead of this, check for TYPE_DISK to expose the disk interface and
make everything else bs->sg = 1. In particular, this includes devices
with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is.
(See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact
scenario.)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-05 16:58:20 +01:00
Peter Lieven
d9738fd246 block/iscsi: fix segfault if writesame fails
commit fa6252b0 introduced a segfault because it tries
to read iTask.task->sense after iTask.task has been
freed.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 15:59:24 +01:00
Peter Lieven
24d3bd67ac block/iscsi: query for supported VPD pages
this patch ensures that we only query for block provisioning and
block limits vpd pages if they are advertised. It also cleans
up the inquiry code and eliminates some redundant code.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 10:02:23 +01:00
Peter Lieven
837c390137 block/iscsi: fix deadlock on scsi check condition
the retry logic was broken because the complete status
of the task structure was not reset. this resulted in
an infinite loop retrying the command over and over.

CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 10:02:23 +01:00
Paolo Bonzini
f2917853f7 iscsi: correctly propagate errors in iscsi_open
Before:
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=iscsi,file.filename=foo
    Failed to parse URL : foo
    qemu-io-old: can't open device (null): Could not open 'foo': Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o file.driver=iscsi,file.filename=foo
    qemu-io: can't open device (null): Failed to parse URL : foo

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:23 +01:00
Paolo Bonzini
35cb1748d5 iscsi: fix indentation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:23 +01:00
Peter Maydell
4c0c9bbe78 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  monitor: Add object_add class argument completion.
  monitor: Add object_del id argument completion.
  monitor: Add device_add device argument completion.
  monitor: Add device_del id argument completion.
  qmp: expose list of supported character device backends
  Use error_is_set() only when necessary
  QMP: allow JSON dict arguments in qmp-shell
  hmp: migrate command (without -d) now blocks correctly

Conflicts:
	blockdev.c

[PMM: resolved trivial conflict in blockdev.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 12:10:23 +00:00
Markus Armbruster
84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Jeff Cody
28f106afb3 block: Add notes to iSCSI's .bdrv_open and .bdrv_reopen_prepare
iSCSI currently does not need to do any actions to support the
current usage of bdrv_reopen().  However, it is important to note
a couple of things: 1.) A connection will not be re-established to
an iSCSI target, and 2.) If iscsi_open() is changed to parse 'flags',
then iscsi_reopen_prepare() may need to be more than a stub.

In light of the above, this commit adds comments above both of the
functions to bring attention to these facts.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 13:38:35 +01:00
Peter Lieven
5d259fc7da block/iscsi: always fill bs->bl.opt_transfer_length
the opt_transfer_length has nothing to do with logical
block provisioning stuff so always copy it from
the block limits VPD page.

Reported-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09 09:12:38 +01:00
Anthony Liguori
e9f526ab7b Merge remote-tracking branch 'bonzini/scsi-next' into staging
* bonzini/scsi-next:
  scsi: Support TEST UNIT READY in the dummy LUN0
  block: add .bdrv_reopen_prepare() stub for iscsi
  virtio-scsi: Prevent assertion on missed events
  virtio-scsi: Cleanup of I/Os that never started
  scsi: Assign cancel_io vector for scsi_disk_emulate_ops

Conflicts:
	block/iscsi.c

aliguori: resolve trivial merge conflict in block/iscsi.c

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:50:14 -08:00
Paolo Bonzini
2c9880c45e iscsi: Set bs->request_alignment
The iSCSI backend already gets the block size from the READ CAPACITY
command it sends.  Save it so that the generic block layer gets it
too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
d34682cd4a block: Move initialisation of BlockLimits to bdrv_refresh_limits()
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:01 +01:00
Peter Lieven
92397116a6 block/iscsi: return -ENOMEM if an async call fails immediately
if an async libiscsi call fails directly it can only be due
to an out of memory condition. All other errors are returned
through the callback.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:16 +01:00
Jeff Cody
dc6afb99b3 block: add .bdrv_reopen_prepare() stub for iscsi
To suppport reopen(), the .bdrv_reopen_prepare() stub must exist.
iSCSI does not have anything that needs to be done to support reopen,
so we can just implement the _prepare() stub.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15 10:44:52 +01:00
Edgar E. Iglesias
133fe77437 Merge remote branch 'luiz/queue/qmp' into qmpq
* luiz/queue/qmp:
  migration: qmp_migrate(): keep working after syntax error
  qerror: Remove assert_no_error()
  qemu-option: Remove qemu_opts_create_nofail
  target-i386: Remove assert_no_error usage
  hw: Remove assert_no_error usages
  qdev: Delete dead code
  error: Add error_abort
  monitor: add object-add (QMP) and object_add (HMP) command
  monitor: add object-del (QMP) and object_del (HMP) command
  qom: catch errors in object_property_add_child
  qom: fix leak for objects created with -object
  rng: initialize file descriptor to -1
  qemu-monitor: HMP cpu-add wrapper
  vl: add missing transition debug->finish_migrate

Message-Id: 1389045795-18706-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-14 12:10:08 +10:00
Anthony Liguori
eedc1a5db5 Merge remote-tracking branch 'bonzini/scsi-next' into staging
* bonzini/scsi-next:
  scsi-disk: add UNMAP limits to block limits VPD page
  block/iscsi: use a bh to schedule co reentrance

Message-id: 1387720926-11421-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-10 11:05:17 -08:00
Peter Crosthwaite
87ea75d5e1 qemu-option: Remove qemu_opts_create_nofail
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.

null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 15:02:30 -05:00
Stefan Weil
219c252193 block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.

libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.

Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20 09:11:58 +01:00
Peter Lieven
8b9dfe9098 block/iscsi: use a bh to schedule co reentrance
this fixes a potential segfault and performance regression.

If the coroutine is reentered directly in the iscsi_co_generic_cb
iscsi_process_{read,write} are interrupted and reentered any
time later. One the one hand this could happen after an iscsi_close
where the iscsi context is already gone (segfault). On the
other hand this limits the number of processed callbacks
in each aio_dispatch to one (potential performance regression).

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-16 11:25:51 +01:00
Peter Lieven
063c3378a9 block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.

The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 11:28:16 +01:00
Peter Lieven
7572ddc8db block/iscsi: set bs->bl.opt_transfer_length
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05 11:45:24 +01:00
Peter Lieven
1c0704a556 block/iscsi: set bdi->cluster_size
this patch aims to set bdi->cluster_size to the internal page size
of the iscsi target so that enabled callers can align requests
properly.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05 11:45:24 +01:00
Paolo Bonzini
fa6252b056 block/iscsi: check WRITE SAME support differently depending on MAY_UNMAP
The current check is right for MAY_UNMAP=1.  For MAY_UNMAP=0, just
try and fall back to regular writes as soon as a WRITE SAME command
fails.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Peter Lieven
2af8a1a704 block/iscsi: updated copyright
added myself to reflect recent work on the iscsi block driver.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Peter Lieven
4b52498e62 block/iscsi: remove .bdrv_has_zero_init
since commit 3ac21627 the default value changed to 0.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03 15:26:49 +01:00
Peter Lieven
d4cd961507 iscsi: add bdrv_co_write_zeroes
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28 10:30:52 +01:00
Peter Lieven
01a6a238a3 iscsi: simplify iscsi_co_discard
now that bdrv_co_discard can handle limits we do not need
the request split logic here anymore.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28 10:30:52 +01:00
Peter Lieven
ba6c59191f iscsi: set limits in BlockDriverState
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28 10:30:52 +01:00
Peter Lieven
186d4f2b1d block/iscsi: add .bdrv_get_info
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28 10:30:51 +01:00
Stefan Weil
73f395fa88 misc: New spelling fixes in comments
compatiblity -> compatibility
continously -> continuously
existance -> existence
usefull -> useful
shoudl -> should

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-26 13:01:57 +04:00
Peter Lieven
24c7608a5d block/iscsi: reenable iscsi_co_get_block_status
Commit f35c934a accidently disabled iscsi_co_get_block_status for all
libiscsi versions. Its not possible to check for enumeration constants
in the C preprocessor. This patch changes the check to the preprocessor
constant LIBISCSI_FEATURE_IOVECTOR which was introduced shortly after
get_lba_status support was added to libiscsi.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-09 10:43:42 +02:00
Benoît Canet
030be32184 block: introduce BlockDriver.bdrv_needs_filename to enable some drivers.
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.

The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.

The first exception to this rule will be the quorum driver.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-25 16:21:28 +02:00
Anthony Liguori
f3ca508f00 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
  lsi: add 53C810 variant
  lsi: remove todo
  lsi: ignore write accesses to CTEST0 registers
  lsi: check ssid versus sdid only if ssid is valid
  lsi: use constant name instead of its value
2013-09-23 11:52:32 -05:00
Stefan Weil
f35c934a5a block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
Debian wheezy includes libiscsi-dev 1.4.0 which does not provide
SCSI_PROVISIONING_TYPE_DEALLOCATED. Drop iscsi_co_get_block_status
in this case to allow compilation without errors.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-18 01:28:50 +02:00
Anthony Liguori
5dc11192b2 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
  qemu-iotests: Fix test 038
  block: Assert validity of BdrvActionOps
  qemu-iotests: Cleanup test image in test number 007
  qemu-img: fix invalid JSON
  coroutine: add ./configure --disable-coroutine-pool
  qemu-iotests: Adjustments due to error propagation
  qcow2: Use Error parameter
  qemu-img create: Emit filename on error
  block: Error parameter for create functions
  block: Error parameter for open functions
  bdrv: Use "Error" for creating images
  bdrv: Use "Error" for opening images
  qemu-iotests: add 057 internal snapshot for block device test case
  hmp: add interface hmp_snapshot_delete_blkdev_internal
  hmp: add interface hmp_snapshot_blkdev_internal
  qmp: add interface blockdev-snapshot-delete-internal-sync
  qmp: add interface blockdev-snapshot-internal-sync
  qmp: add internal snapshot support in qmp_transaction
  snapshot: distinguish id and name in snapshot delete
  snapshot: new function bdrv_snapshot_find_by_id_and_name()
  ...

Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
2013-09-17 09:51:40 -05:00
Peter Lieven
65f3e33964 iscsi: split discard requests in multiple parts
Replace .bdrv_aio_discard with .bdrv_co_discard so that discard
requests can be split in multiple parts, each for a small amount
of sectors.

This is useful because we expose a generic API with no limit
on the amount of sectors that can be unmapped in one request.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 13:14:19 +02:00
Max Reitz
d5124c00d8 bdrv: Use "Error" for creating images
Add an Error ** parameter to BlockDriver.bdrv_create to allow more
specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz
015a1036a7 bdrv: Use "Error" for opening images
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:47 +02:00
Peter Lieven
54a5c1d5db iscsi: add .bdrv_get_block_status
this patch adds a coroutine for .bdrv_co_block_status as well as
a generic framework that can be used to build coroutines in block/iscsi.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Peter Lieven
f18a7cbb09 iscsi: add logical block provisioning information to iscsilun
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Paolo Bonzini
5accc8408f scsi: prefer UUID to VM name for the initiator name
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Fam Zheng
4f6fd3491c block: make bdrv_delete() static
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.

This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng
13c91cb7e2 iscsi: use bdrv_new() instead of stack structure
BlockDriverState structure needs bdrv_new() to initialize refcnt, don't
allocate a local structure variable and memset to 0, becasue with coming
refcnt implementation, bdrv_unref will crash if bs->refcnt not
initialized to 1.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Stefan Hajnoczi
f2e5dca46b aio: drop io_flush argument
The .io_flush() handler no longer exists and has no users.  Drop the
io_flush argument to aio_set_fd_handler() and related functions.

The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19 15:52:19 +02:00
Stefan Hajnoczi
70ecdc6e4e block/iscsi: drop iscsi_process_flush()
.io_flush() is no longer called so drop iscsi_process_flush().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19 15:52:19 +02:00
Richard W.M. Jones
f5075224d6 block/iscsi.c: Fix printf format error.
The error on armv7hl was:

block/iscsi.c: In function ‘is_request_lun_aligned’:
block/iscsi.c:251:26: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int64_t’ [-Werror=format=]
                          iscsilun->block_size, sector_num, nb_sectors);
                          ^

This also splits the long line to comply with qemu coding guidelines.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-02 18:02:48 +04:00
Peter Lieven
0777b5dde4 iscsi: factor out sector conversions
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17 17:01:41 +02:00
Peter Lieven
91bea4e2bb iscsi: assert that sectors are aligned to LUN blocksize
if the blocksize of an iSCSI LUN is bigger than the BDRV_SECTOR_SIZE
it is possible that sector_num or nb_sectors are not correctly
aligned.

to avoid corruption we fail requests which are misaligned.

Signed-off-by: Peter Lieven <pl@kamp.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17 17:01:41 +02:00
Peter Lieven
7e4d5a9f94 iscsi: remove support for misaligned nb_sectors in aio_readv
this hask is not working (anymore). support for misaligned offsets should
be handled at the block layer.

Signed-off-by: Peter Lieven <pl@kamp.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17 17:01:41 +02:00
Peter Lieven
d3bda7bc16 iscsi: fix -ENOSPC in iscsi_create()
the -ENOPSC case did not work due to the missing goto.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17 17:00:28 +02:00
Ronnie Sahlberg
0a53f01074 Fix iSCSI crash on SG_IO with an iovector
Don't assume that SG_IO is always invoked with a simple buffer,
check the iovec_count and if it is >= 1 then we need to pass an array
of iovectors to libiscsi instead of just a plain buffer.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17 17:00:26 +02:00
Paolo Bonzini
1288844e7c iscsi: reorganize iscsi_readcapacity_sync
Avoid the goto, and use the same retry logic for the 10- and 16-
byte versions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-18 12:43:03 +02:00
Paolo Bonzini
f0d2a4d4d6 iscsi: simplify freeing of tasks
Always free them in the iscsi_aio_*_acb functions and remove the
checks in their callers.  Remove ifs when the task struct was
previously dereferenced (spotted by Coverity).

Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-18 12:43:03 +02:00
Kevin Wolf
56d1b4d21d block: Remove filename parameter from .bdrv_file_open()
It is unused now in all block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 11:34:35 +02:00
Kevin Wolf
60beb3412d iscsi: Use bdrv_open options instead of filename
This is only to convert the internal interface that is used for passing
the "filename" to be parsed, but converting to actual fine grained
options is left for another day, as it doesn't look trivial.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 10:27:59 +02:00
Paolo Bonzini
0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Kevin Wolf
787e4a8500 block: Add options QDict to bdrv_file_open() prototypes
The new parameter is unused yet.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Peter Lieven
cb1b83e740 iscsi: add iscsi_truncate support
this patch adds iscsi_truncate which effectively allows for
online resizing of iscsi volumes. for this to work you have
to resize the volume on your storage and then call
block_resize command in qemu which will issue a
readcapacity16 to update the capacity.

v4:
  - factor out complete readcapacity logic into a separate function
  - handle capacity change check condition in readcapacity function
    (this happens if the block_resize cmd is the first iscsi task
    executed after a resize on the storage)

v3:
  - remove switch statement in iscsi_open
  - create separate patch for brdv_drain_all() in bdrv_truncate()

v2:
  - add a general bdrv_drain_all() before bdrv_truncate() to avoid
    in-flight AIOs while the device is truncated
  - since no AIOs are in flight we can use a sync libiscsi call
    to re-read the capacity
  - factor out the readcapacity16 logic as it is redundant
    to iscsi_open() and iscsi_truncate().

Signed-off-by: Peter Lieven <pl@kamp.de>
[allow any type of unit attention check condition in iscsi_readcapacity_sync(),
 as in Message-ID: <51263A2A.6070304@dlhnet.de> - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 17:51:51 +01:00
Peter Lieven
1dde716ed6 iscsi: retry read, write, flush and unmap on unit attention check conditions
the storage might return a check condition status for various reasons.
(e.g. bus reset, capacity change, thin-provisioning info etc.)

currently all these informative status responses lead to an I/O error
which is populated to the guest. this patch introduces a retry mechanism
to avoid this.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05 17:51:50 +01:00
Peter Lieven
7371d56fb2 iscsi: add support for iovectors
This patch adds support for directly passing the iovec
array from QEMUIOVector if libiscsi supports it (1.8.0
or newer).

Signed-off-by: Peter Lieven <pl@kamp.de>
[Preserve the improvements from commit 4cc841b, iscsi: partly
 avoid iovec linearization in iscsi_aio_writev, 2012-11-19 - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-24 15:37:55 +01:00
Paolo Bonzini
4790b03d30 iscsi: do not leak acb->buf when commands are aborted
acb->buf is freed in the WRITE(16) callback, but this may not
get called at all when commands are aborted.  Add another
free in the ABORT TASK callback, which requires setting acb->buf
to NULL everywhere.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-24 15:37:55 +01:00
Anthony Liguori
177f7fc688 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
  scsi: Drop useless null test in scsi_unit_attention()
  lsi: use qbus_reset_all to reset SCSI bus
  scsi: fix segfault with 0-byte disk
  iscsi: add support for iSCSI NOPs [v2]
  iscsi: partly avoid iovec linearization in iscsi_aio_writev
  iscsi: add iscsi_create support
2013-01-23 09:08:54 -06:00
Peter Lieven
5b5d34ec98 iscsi: add support for iSCSI NOPs [v2]
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target.
If a consecutive number of NOP-In replies fail a reconnect is initiated.
iSCSI NOPs help to ensure that the connection to the target is still operational.
This should not, but in reality may be the case even if the TCP connection is still
alive if there are bugs in either the target or the initiator implementation.

v2:
 - track the NOPs inside libiscsi so libiscsi can reset the counter
   in case it initiates a reconnect.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-22 15:07:03 +01:00
Peter Lieven
4cc841b57c iscsi: partly avoid iovec linearization in iscsi_aio_writev
libiscsi expects all write16 data in a linear buffer. If the
iovec only contains one buffer we can skip the linearization
step as well as the additional malloc/free and pass the
buffer directly.

Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-22 15:07:03 +01:00
Peter Lieven
de8864e5ae iscsi: add iscsi_create support
This patch adds support for bdrv_create. This allows e.g.
to use qemu-img to convert from any supported device to
an iscsi backed storage as destination.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-22 15:07:03 +01:00
Paolo Bonzini
4d4545743f qemu-option: move standard option definitions out of qemu-config.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:17:53 +01:00
Paolo Bonzini
1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini
737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Paolo Bonzini
077805fa92 janitor: do not rely on indirect inclusions of or from qemu-char.h
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!).  Clean this up, and also
add missing inclusions of qemu-char.h itself.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:52 +01:00
Peter Lieven
f807ecd574 iscsi: do not assume device is zero initialized
Without any complex checks we can't assume that an
iscsi target is initialized to zero.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-28 12:51:58 +01:00
Peter Lieven
e829b0bb05 iscsi: fix deadlock during login
If the connection is interrupted before the first login is successfully
completed qemu-kvm is waiting forever in qemu_aio_wait().

This is fixed by performing an sync login to the target. If the
connection breaks after the first successful login errors are
handled internally by libiscsi.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-28 12:50:56 +01:00
Peter Lieven
8da1e18b0c iscsi: fix segfault in url parsing
If an invalid URL is specified iscsi_get_error(iscsi) is called
with iscsi == NULL.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-28 12:46:13 +01:00
Stefan Hajnoczi
d7331bed11 aio: rename AIOPool to AIOCBInfo
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore.  Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14 18:19:21 +01:00
Anthony Liguori
444dbc381b Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
  block: remove keep_read_only flag from BlockDriverState struct
  block: convert bdrv_commit() to use bdrv_reopen()
  block: vpc image file reopen
  block: vdi image file reopen
  block: vmdk image file reopen
  block: qcow image file reopen
  block: qcow2 image file reopen
  block: qed image file reopen
  block: raw image file reopen
  block: raw-posix image file reopen
  block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
  block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
  block: do not parse BDRV_O_CACHE_WB in block drivers
  block: move open flag parsing in raw block drivers to helper functions
  block: move aio initialization into a helper function
  block: Framework for reopening files safely
  block: make bdrv_set_enable_write_cache() modify open_flags
  block: correctly set the keep_read_only flag
  blockdev: preserve readonly and snapshot states across media changes
2012-09-25 16:06:16 -05:00
Jeff Cody
39c9fb9565 block: do not parse BDRV_O_CACHE_WB in block drivers
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags,
and in the bs->open_flags.

This patch removes the code, leaving the behaviour behind as if
BDRV_O_CACHE_WB was set.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:11 +02:00
Ronnie Sahlberg
40a13ca8d2 iSCSI: We dont need to explicitely call qemu_notify_event() any more
We no longer need to explicitely call qemu_notify_event() any more
since this is now done automatically any time the filehandles we listen
to change.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:12:33 +02:00
Ronnie Sahlberg
f1a12821d7 iSCSI: We need to support SG_IO also from iscsi_ioctl()
We need to support SG_IO from the synchronous iscsi_ioctl() since
scsi-block uses this to do an INQ to the device to discover its properties
This patch makes scsi-block work with iscsi.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:05:51 +02:00
Ronnie Sahlberg
135b908878 iscsi: Set number of blocks to 0 for blank CDROM devices
The number of blocks of the device is used to compute the device size
in bdrv_getlength()/iscsi_getlength().
For MMC devices, the ReturnedLogicalBlockAddress in the READCAPACITY10
has a special meaning when it is 0.
In this case it does not mean that LBA 0 is the last accessible LBA,
and thus the device has 1 readable block, but instead it means that the
disc is blank and there are no readable blocks.

This change ensures that when the iSCSI LUN is loaded with a blank
DVD-R disk or similar that bdrv_getlength() will return the correct
size of the device as 0 bytes.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-08-28 14:50:08 +02:00
Paolo Bonzini
1bd075f29e iscsi: fix races between task completion and abort
This patch fixes two main issues with block/iscsi.c:

1) iscsi_task_mgmt_abort_task_async calls iscsi_scsi_task_cancel which
was also directly called in iscsi_aio_cancel

2) a race between task completion and task abortion could happen cause
the scsi_free_scsi_task were done before iscsi_schedule_bh has finished.
To fix this, all the freeing of IscsiTasks and releasing of the AIOCBs
is centralized in iscsi_bh_cb, independent of whether the SCSI command
has completed or was cancelled.

3) iscsi_aio_cancel was not synchronously waiting for the end of the
command.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-20 15:58:47 +02:00
Paolo Bonzini
cfb3f5064a iscsi: simplify iscsi_schedule_bh
It is always used with the same callback, remove the argument.  And
its return value is never used, assume allocation succeeds.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-20 15:58:47 +02:00
Paolo Bonzini
27cbd828c6 iscsi: move iscsi_schedule_bh and iscsi_readv_writev_bh_cb
Put these functions at the beginning, to avoid forward references
in the next patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-20 15:58:47 +02:00
Paolo Bonzini
b209091957 Revert "iscsi: Fix NULL dereferences / races between task completion and abort"
This reverts commit 64e69e8092.  The commit
returned immediately from iscsi_aio_cancel, risking corruption in case the
following happens:

    guest                  qemu                 target
  =========================================================================
    send write 1 -------->
                           send write 1 -------->
    cancel write 1 ------>
                           cancel write 1 ------>
       <------------------ cancellation processed
    send write 2 -------->
                           send write 2 -------->
                               <---------------- completed write 2
       <------------------ completed write 2
                               <---------------- completed write 1
                               <---------------- cancellation not done

Here, the guest would see write 2 superseding write 1, when in fact the
outcome could have been the opposite.  The right behavior is to return
only after the target says whether the cancellation was done or not, and
it will be implemented by the next three patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-20 15:50:45 +02:00
Stefan Priebe
64e69e8092 iscsi: Fix NULL dereferences / races between task completion and abort
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15 13:16:22 +02:00
Ronnie Sahlberg
31459f463a iscsi: Pick default initiator-name based on the name of the VM
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.

Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.

This way we can thus create default names to use as the initiator name
based on the guest session.

If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be

    iqn.2008-11.org.linux-kvm

If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of

    iqn.2008-11.org.linux-kvm:<name>

These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-08-09 15:04:09 +02:00
Paolo Bonzini
f2ef4a6dd9 iscsi: reorganize code for parse_initiator_name
Merge the occurrences of the "iqn.2008-11.org.linux-kvm" string
to avoid duplication.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-08 14:51:59 +02:00
Paolo Bonzini
b93c94f7ec iscsi: do not leak initiator_name
The argument of iscsi_create_context is never freed by libiscsi,
which in fact calls strdup on it.  Avoid a leak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-08 14:51:59 +02:00
Anthony Liguori
23797df3d9 Merge remote-tracking branch 'mjt/mjt-iov2' into staging
* mjt/mjt-iov2:
  rewrite iov_send_recv() and move it to iov.c
  cleanup qemu_co_sendv(), qemu_co_recvv() and friends
  export iov_send_recv() and use it in iov_send() and iov_recv()
  rename qemu_sendv to iov_send, change proto and move declarations to iov.h
  change qemu_iovec_to_buf() to match other to,from_buf functions
  consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
  allow qemu_iovec_from_buffer() to specify offset from which to start copying
  consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
  rewrite iov_* functions
  change iov_* function prototypes to be more appropriate
  virtio-serial-bus: use correct lengths in control_out() message

Conflicts:
	tests/Makefile

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-09 12:35:06 -05:00
Ronnie Sahlberg
622695a458 ISCSI: force use of sg for SMC and SSC devices
If the device we open is a SMC or SSC device, then force the use of sg. We
dont have any medium changer or tape emulation so only passthrough via
real sg or scsi-generic via iscsi would work anyway.

Forcing sg also makes qemu skip trying to read from the device to guess
the image format by reading from the device (find_image_format()).
SMC devices do not implement READ6/10/12/16 so it is not possible to
read from them (SSC have different CDBs).

With this patch I can successfully manage a SMC device wiht iscsi in
passthrough mode.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[Added TYPE_TAPE handling - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-02 10:18:41 +02:00
Ronnie Sahlberg
983924532f ISCSI: Add SCSI passthrough via scsi-generic to libiscsi
Update iscsi to allow passthrough of SG_IO scsi commands when the iscsi
device is forced to be scsi-generic.

Implement both bdrv_ioctl() and bdrv_aio_ioctl() in the iscsi backend,
emulate the SG_IO ioctl and pass the SCSI commands across to the
iscsi target.

This allows end-to-end passthrough of SCSI all the way from the guest,
to qemu, via scsi-generic, then libiscsi all the way to the iscsi target.

To activate this you need to specify that the iscsi lun should be treated
as a scsi-generic device.

Example:
    -device lsi -device scsi-generic,drive=MyISCSI \
    -drive file=iscsi://10.1.1.125/iqn.ronnie.test/1,if=none,id=MyISCSI

Note, you can currently not boot a qemu guest from a scsi device.

Note,
This only works when the host is linux, since the emulation relies on
definitions of SG_IO from the scsi-generic implementation in the
linux kernel.
It should be fairly easy to re-implement some structures similar enough
for non-linux hosts to do the same style of passthrough via a fake
scsi generic layer and libiscsi if need be.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-02 10:18:41 +02:00
Michael Tokarev
d5e6b1619c change qemu_iovec_to_buf() to match other to,from_buf functions
It now allows specifying offset within qiov to start from and
amount of bytes to copy.  Actual implementation is just a call
to iov_to_buf().

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11 23:12:11 +04:00
Ronnie Sahlberg
f4dfa67f04 ISCSI: Switch to using READ16/WRITE16 for I/O to the LUN
This allows using LUNs bigger than 2TB.  Keep using READ10 for other
device types such as MMC.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28 14:04:16 +02:00
Ronnie Sahlberg
6bcd1346bb ISCSI: Only call READCAPACITY16 for SBC devices, use READCAPACITY10 for MMC
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28 14:04:15 +02:00
Ronnie Sahlberg
dbfff6d776 ISCSI: get device type at connection time
This is needed to avoid READ CAPACITY(16) for MMC devices.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-28 14:04:14 +02:00
Paolo Bonzini
c7b4a95202 ISCSI: change num_blocks to 64-bit
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-28 14:04:14 +02:00
Ronnie Sahlberg
c9b9f6824f ISCSI: redo how we set up the events
Call qemu_notify_event() after updating events.  Otherwise, If we add
an event for -is-writeable but the socket is already writeable there
may be a delay before the event callback is actually triggered.

Those delays would in particular hurt performance during BIOS boot and
when the GRUB bootloader reads the kernel and initrd.

But first call out to the socket write functions directly, and only set up
the write event if the socket is full.  This will happen very rarely and
this improves performance.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-05-28 14:04:06 +02:00
Ronnie Sahlberg
fa6acb0c2f ISCSI: Add support for thin-provisioning via discard/UNMAP and bigger LUNs
Update the configure test for libiscsi support to detect version 1.3
or later.  Version 1.3 of libiscsi provides both READCAPACITY16 as well
as UNMAP commands.

Update the iscsi block layer to use READCAPACITY16 to detect the size of
the LUN instead of READCAPACITY10. This allows support for LUNs larger
than 2TB.

Update to implement bdrv_aio_discard() using the UNMAP command.
This allows us to use thin-provisioned LUNs from TGTD and other iSCSI
targets that support thin-provisioning.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[squashed in subsequent patch from Ronnie to fix off-by-one in LBA count]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-04 10:39:18 +02:00
Paolo Bonzini
bafbd6a1c6 aio: remove process_queue callback and qemu_aio_process_queue
Both unused after the previous patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-19 16:37:53 +02:00
Ronnie Sahlberg
f9dadc9855 iSCSI: add configuration variables for iSCSI
This patch adds configuration variables for iSCSI to set
initiator-name to use when logging in to the target,
which type of header-digest to negotiate with the target
and username and password for CHAP authentication.

This allows specifying a initiator-name either from the command line
-iscsi initiator-name=iqn.2004-01.com.example:test
or from a configuration file included with -readconfig
    [iscsi]
      initiator-name = iqn.2004-01.com.example:test
      header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
      user = CHAP username
      password = CHAP password

If you use several different targets, you can also configure this on a per
target basis by using a group name:
    [iscsi "iqn.target.name"]
    ...

The configuration file can be read using -readconfig.
Example :
qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1
 -readconfig iscsi.conf

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-09 16:17:50 +01:00
Ronnie Sahlberg
c589b24972 iSCSI block driver
This provides built-in support for iSCSI to QEMU.

This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.

This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
    git://github.com/sahlberg/libiscsi.git

The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
  qemu against libiscsi.
* --enable-libiscsi
  Force a build against libiscsi. If libiscsi is not available
  the build will fail.
* --disable-libiscsi
  Do not link against libiscsi, even if it is available.

When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.

You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:48 +02:00