tests/tcg/configure.sh has a complicated story.
In the beginning its code ran as part of the creation of config-target.mak
files, and that is where it placed the information on the target compiler.
However, probing for the buildability of TCG tests required multiple
inclusions of config-target.mak in the _main_ Makefile (not in
Makefile.target, which took care of building the QEMU executables in
the pre-Meson era), which polluted the namespace.
Thus, it was moved to a separate directory. It created small config-*.mak
files in $(BUILD_DIR)/tests/tcg. Those were also included multiple
times, but at least they were small and manageable; this was also an
important step in disentangling the TCG tests from Makefile.target.
Since then, Meson has allowed the configure script to go on a diet.
A few compilation tests survive (mostly for sanitizers) but these days
it mostly takes care of command line parsing, looking for tools, and
setting up the environment for Meson to do its stuff.
It's time to extend configure with the capability to build for more
than just one target: not just tests, but also firmware. As a first
step, integrate all the logic to find cross compilers in the configure
script, and move tests/tcg/configure.sh back there (though as a
separate loop, not integrated in the one that generates target
configurations for Meson).
tests/tcg is actually very close to being buildable as a standalone
project, so I actually expect the compiler tests to move back to
tests/tcg, as a "configure" script of sorts which would run at Make
time after the docker images are built. The GCC tree has a similar idea
of doing only bare-bones tree-wide configuration and leaving the rest
for Make time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-19-alex.bennee@linaro.org>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
Use more conventional variables to set the location of pre-built
DLL/bin.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-15-marcandre.lureau@redhat.com>
Now that we allow compiling with Capstone v3.0.5 again, all our supported
build hosts should provide at least this version of the disassembler
library, so we do not need to ship this as a submodule anymore.
Message-Id: <20220516145823.148450-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our support statement for Windows currently talks about "Vista / Server
2008" - which is related to the API of Windows, and this is not easy
to understand for the non-technical users. Additionally, glib sets the
_WIN32_WINNT macro to 0x0601 already, which indicates the Windows 7 API,
so QEMU effectively depends on the Windows 7 API, too.
Thus let's bump the _WIN32_WINNT setting in QEMU to the same level as
glib uses and adjust our support statement in the documentation to
something similar that we're using for Linux and the *BSD systems
(i.e. only the two most recent versions), which should hopefully be
easier to understand for the users now.
And since we're nowadays also compile-testing QEMU with MSYS2 on Windows
itself, I think we could mention this build environment here, too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/880
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220513063958.1181443-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not rely on the detection that was done in the configure script,
since in the future we may want to cross-compile this file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Finish the conversion by moving all the definitions and the constraint
checks to meson_options.txt and meson.build respectively.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-user-fs is a device and it should be possible to enable/disable
it with --without-default-devices, not --without-default-features.
Compute its default value in Kconfig to obtain the more intuitive
behavior.
In this case the configure options were undocumented, too.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-vsock and vhost-user-vsock are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanup to ease review of the conversion to meson. vhost_net_user and
vhost_net_vdpa are never assigned anything in the command line parsing
loop, so they are always equal to $vhost_user and $vhost_vdpa.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has no functional change, it only makes the command line shorter
and nicer.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If an option is not used anywhere by the configure script, it can be just
added to $meson_options even if it is not parsed by the automatically
generated bits in scripts/meson-buildoptions.sh.
The only slightly tricky case is $debug, where the
if test "$fortify_source" = "yes" ; then
QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
debug=no
fi
assignment is dead; configure sets fortify_source=no whenever debug=yes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While prefix, bindir and qemu_suffix needs special treatment due to
differences between Windows and POSIX systems, everything else
needs no extra code in configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the last CONFIG_* entry in config-host.mak that had to be
special cased.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hash is now generated with a Python script.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new support for string option parsing.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new support for string option parsing.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is quite a complicated check. I moved all the test programs to
a single file in scripts/, picking the right program with #if and a -D
flag in meson.build's cc.links() invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mingw-w64-tool package in Fedora provides widl tool with a
cross prefix, so adds it automatically for cross builds.
WIDL env can be used to redefine the path to tool.
The same behavior as with windres.
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220428181525.300521-1-kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$debug_info is not needed anywhere except in the final meson invocation,
no need to special case it.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason other than history (dating back to commit 1d728c3946, "tests: add gcov
support", 2013-01-06) for this, remove this unnecessary conditional.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file has been removed in commit a8260d3876 ("ui: install logo icons to
$prefix/share/icons", 2019-01-21), do not try to symlink it in the build tree.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The .wxs file uses $(var.Mingw_bin) while configure/meson have always
used Mingw_dlls. Fix them to match what was probably intended.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tcg_interpreter is never written, it is purely a meson option;
trace_backends is never read.
And SeaBIOS is only build from the source tree with roms/Makefile,
so the config.mak file is unused.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c87ea11631 "configure: add --without-default-feature"
changed fortify_source from "yes" to "$default_feature". But there's
no option to turn it on, we only turn it off for debug build. I think
this should always be initialized to "yes" in the first place.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20220422100825.3692002-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-19-alex.bennee@linaro.org>
(note: the test isn't working as intended, the next patches fixes it)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Filter unsupported Objective-C options, to avoid
'unknown-warning-option' warnings when using Clang:
[34/373] Compiling Objective-C object libcommon.fa.p/audio_coreaudio.m.o
warning: unknown warning option '-Wold-style-declaration'; did you mean '-Wout-of-line-declaration'? [-Wunknown-warning-option]
warning: unknown warning option '-Wimplicit-fallthrough=2'; did you mean '-Wimplicit-fallthrough'? [-Wunknown-warning-option]
2 warnings generated.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We can pass C/CPP/LD flags via CFLAGS/CXXFLAGS/LDFLAGS environment
variables, or via configure --extra-cflags / --extra-cxxflags /
--extra-ldflags options. Provide similar behavior for Objective C:
use existing flags from $OBJCFLAGS, or passed via --extra-objcflags.
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
With the possibility of using a pipe pair via qemu_pipe() as a
replacement on operating systems that doesn't support eventfd,
vhost-user can also work on all POSIX systems.
This change allows enabling vhost-user on all non-Windows platforms
and makes libvhost_user (which still depends on eventfd) a linux-only
feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220304100854.14829-4-slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.
Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For the users, it looks a little bit weird that capstone and slirp are
not disabled automatically if they run the configure script with the
"--without-default-features" option, so let's do that now.
Note: fdt is *not* changed accordingly since this affects the targets
that we can build, so disabling fdt automatically here might have
unexpected side-effects for the users.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220221090647.150184-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The VSS headers are part of standard MS VS SDK, at least since version
15, and probably before that.
They are also included with MinGW, although currently broken.
Let's streamline a bit the options, by not making it so special, and
instead rely on proper system headers configuration or user
--extra-cxxflags. This still requires some extra step to cross-build
with MinGW as described in the meson.build file now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Use a "feature"-type option. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test is a bit different from the others, in that it does not run
if $membarrier is empty. For meson, the default can simply be disabled;
if one day we will toggle the default, no change is needed in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with other tests, --enable-avx2 and --enable-avx512f
fail to compile on x86 systems if cpuid.h is not available.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
__get_cpuid_max returns an unsigned value.
For consistency, store the result in an unsigned variable.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Without this fix, any use of --cross-cc-cflags-* causes a message like:
$ ../configure --cross-cc-ppc64le=clang --cross-cc-cflags-ppc64le="-target powerpc64le-unknown-linux-gnu -sysroot ..."
../configure: 1: eval: cross_cc_cflags_--cross-cc-cflags-ppc64le=-target: not found
../configure: 3816: export: cross_cc_cflags_--cross-cc-cflags-ppc64le: bad variable name
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220120173142.2755077-1-matheus.ferst@eldorado.org.br>
[Fix other occurrences too, noted by Philippe Mathieu-Daudé. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If roms/seabios/Makefile is not present, the configure script
is not creating the roms/seabios directory anymore (commit
5dce7b8d8c, "configure: remove DIRS", 2021-12-18); thus, creating
roms/seabios/config.mak fails.
The easiest thing to do is to not create the file, since it will not
be used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures that the file is regenerated properly whenever config-target.h
or config-devices.h files change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes it easier to identify candidates for moving to Meson.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always include the STRIP variable in config-host.mak (it's only used
by the s390-ccw firmware build, and it adds a default if configure
omitted it), and use meson-buildoptions.sh to turn
--enable/--disable-strip into -Dstrip.
The default is now not to strip the binaries like for almost every other
package that has a configure script.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These files have been removed for more than year in the best
case, or for more than ten years for some really old TCG files.
Remove any traces of it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to other optional features, leave the variables empty and compute
the actual value later. Use the existence of include or source directories
to detect whether an OS or CPU supports respectively bsd-user and linux-user.
For now, BSD user-mode emulation is buildable even on TCI-only
architectures. This probably will change once safe signals are
brought over from linux-user.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
--dynamic-list is present on all supported ELF (not Windows or Darwin)
platforms, since it dates back to 2006; -exported_symbols_list is
likewise present on all supported versions of macOS. Do not bother
doing a functional test in configure.
Remove the file creation from configure as well: for Darwin, move the
the creation of the Darwin-formatted symbols to meson; for ELF, use the
file in the source path directly and switch from -Wl, to -Xlinker to
not break weird paths that include a comma.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The handling for the XFS_IOC_DIOINFO ioctl is currently quite excessive:
This is not a "real" feature like the other features that we provide with
the "--enable-xxx" and "--disable-xxx" switches for the configure script,
since this does not influence lots of code (it's only about one call to
xfsctl() in file-posix.c), so people don't gain much with the ability to
disable this with "--disable-xfsctl".
It's also unfortunate that the ioctl will be disabled on Linux in case
the user did not install the right xfsprogs-devel package before running
configure. Thus let's simplify this by providing the ioctl definition
on our own, so we can completely get rid of the header dependency and
thus the related code in the configure script.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215125824.250091-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use $cpu instead of $ARCH, which has been removed from
the top-level configure.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 823eb01345 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Example output of `uname -a` on an initial Gentoo LA64 port, running
the upstream submission version of Linux (with some very minor patches
not influencing output here):
> Linux <hostname> 5.14.0-10342-g37a00851b145 #5 SMP PREEMPT Tue Aug 10 12:56:24 PM CST 2021 loongarch64 GNU/Linux
And the same on the vendor-supplied Loongnix 20 system, with an early
in-house port of Linux, and using the old-world ABI:
> Linux <hostname> 4.19.167-rc5.lnd.1-loongson-3 #1 SMP Sat Apr 17 07:32:32 UTC 2021 loongarch64 loongarch64 loongarch64 GNU/Linux
So a name of "loongarch64" matches both, fortunately.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211221054105.178795-31-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Further meson configuration tests are to be added based on the glib
version. Also correct the version reporting in the config log.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
DIRS is used to create the directory in which the LINKS symbolic links
reside, or to create directories for object files. The former can
be done directly in the symlinking loop, while the latter is done
by Meson already, so DIRS is not necessary.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$ARCH and the HOST_* symbols are only used by the QEMU build; configure
uses $cpu instead. Remove it from config-host.mak.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only difference between the two, as far as either configure or
Meson are concerned, is in the multilib flags passed to the compiler.
For QEMU, this fixes the handling of TYPE_OLDDEVT in
include/exec/user/thunk.h and enables testing of dirty ring buffer,
because both are using HOST_X86_64.
For tests/tcg, this means that on a hypothetical x32 host the
cross compiler will not be used to build the tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only difference between the two, as far as either configure or
Meson are concerned, is the default endianness of the compiler.
For tests/tcg, specify the endianness explicitly on the command line;
for configure, do the same so that it is possible to have --cpu=ppc64le
on a bigendian system or vice versa. Apart from this, cpu=ppc64le can
be normalized to ppc64 also in configure and not just in the meson
cross file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
targetos is already mostly the same as Meson host_machine.system(),
just in CamelCase. Adjust Windows, which is different, and switch to
lowercase to match Meson.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using the MinGW toolchain, we use the .exe suffix for the
executable name. We also need to use it for the symlinks in the
build directory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211109144504.1541206-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's easier to do this in meson.build now.
Message-Id: <20211209144801.148388-1-thuth@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
User flags should be passed via CFLAGS/CXXFLAGS/LDFLAGS,
or --extra-cflags/extra-cxxflags/--extra-ldflags on the
command line.
QEMU_CFLAGS, QEMU_CXXFLAGS and QEMU_LDFLAGS are reserved
for flags detected by configure, so do not add to them
and clear them at the beginning of the script.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson (intentionally) does not add QEMU_CFLAGS to cc.compiles/cc.links
tests, as they are supposed to be independent of the specific sets of
compilation flags used to build the programs. However, the user can
still use CFLAGS or the toolchain file's LANG_args/LANG_link_args option
to specify -I or -L options that apply to cc.compiles/cc.links as well.
This is also the intended use of configure's --extra-cflags,
--extra-cxxflags and --extra-ldflags options. For example, if
one has netmap's header in a nonstandard directory, up to commit
837b84b1c0 it used to work fine to do:
.../configure --enable-netmap \
--extra-cflags=-I/path/to/netmap/sys
but since the test was converted to meson, this does not work anymore.
Pass these options to meson via the toolchain file instead of via
config-host.mak, since both have the same purpose.
Reported-by: Owen LaGarde
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: 47b30835e4 ("configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson", 2020-10-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CFLAGS, CXXFLAGS and LDFLAGS influence the tests (for example if they include
-L or -I options), so they should be kept from the invocation of configure
to the subsequent reinvocations via config.status.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson_quote assumes a non-empty argument list, and incorrectly returns a
one-entry array if passed nothing. Move the check for an empty argument
list from the invocations to the function itself.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
--audio-drv-list is now establishing which audio drivers to try if -audiodev
is not used; drivers for -audiodev are configured with --enable/--disable
options or possibly --without-default-features. Adjust the help message
for --audio-drv-list.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We recently bumped our minimum required version of GCC to 7.4
and Clang to 6.0, and those compiler versions should support
the __thread keyword already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211028185910.1729744-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And while we're at it, also provide a proper entry for this feature
in meson_options.txt, so that people who don't need it have a knob
to disable this feature.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211028185910.1729744-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This gains some bugfixes, especially:
- it fixes the introspection of array options. While technically we
still support Meson 0.58.2, this issue only appears when adding a new
option and not if the user is just building QEMU. In the relatively
rare case of a contributor using --meson to point to a 0.58 version,
review can catch spurious changes to scripts/meson-buildoptions.sh
easily.
- it fixes "meson test" when it is not the process group leader. Make is
the process group leader when "make check" invokes "meson test", so this
is a requirement for using it as a test harness.
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 4dba278908 ("configure, meson: move CPU_CFLAGS out of
QEMU_CFLAGS"), CPU_CFLAGS is included in the link commands both during
configure and (via config-meson.cross) during meson. It need not be
added separately to QEMU_LDFLAGS.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using a linuxthreads system with a recent QEMU will have bigger problems
than just not having NPTL. Remove the unnecessary check.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables native builds on MSYS2 with symlinks disabled.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Message-Id: <2b5ab039-8495-b55f-03f1-ecfd996907a9@zapateado.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This partially reverts commit bbd2d5a812.
This commit was misguided and broke using --disable-pie on any distro
that enables PIE by default in their compiler driver, including Debian
and its derivatives. Whilst -no-pie is not a linker flag, it is a
compiler driver flag that ensures -pie is not automatically passed by it
to the linker. Without it, all compile_prog checks will fail as any code
built with the explicit -fno-pie will fail to link with the implicit
default -pie due to trying to use position-dependent relocations. The
only bug that needed fixing was LDFLAGS_NOPIE being used as a flag for
the linker itself in pc-bios/optionrom/Makefile.
Note this does not reinstate exporting LDFLAGS_NOPIE, as it is unused,
since the only previous use was the one that should not have existed. I
have also updated the comment for the -fno-pie and -no-pie checks to
reflect what they're actually needed for.
Fixes: bbd2d5a812
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20210805192545.38279-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The existing code for safe-syscall.inc.S will compile
without change for riscv32 and riscv64. We may also
drop the meson.build stanza that merges them for tcg/.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now meson_options.txt lists about 90 options. Each option
needs code in configure to parse it and pass the option down to Meson as
a -D command-line argument; in addition the default must be duplicated
between configure and meson_options.txt. This series tries to remove
the code duplication by generating the case statement for those --enable
and --disable options, as well as the corresponding help text.
About 80% of the options can be handled completely by the new mechanism.
Eight meson options are not of the --enable/--disable kind. Six more need
to be parsed in configure for various reasons documented in the patch,
but they still have their help automatically generated.
The advantages are:
- less code in configure
- parsing and help is more consistent (for example --enable-blobs was
not supported)
- options are described entirely in one place, meson_options.txt.
This make it more attractive to use Meson options instead of
hand-crafted configure options and config-host.mak
A few options change name: --enable-tcmalloc and --enable-jemalloc
become --enable-malloc={tcmalloc,jemalloc}; --disable-blobs becomes
--disable-install-blobs; --enable-trace-backend becomes
--enable-trace-backends. However, the old names are allowed
for backwards compatibility.
Message-Id: <20211007130829.632254-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare the configure script and Makefile for automatically generated
help and parsing.
Because we need to run the script to generate the full help, we
cannot rely on the user supplying the path to a Python interpreter
with --python; therefore, the introspection output is parsed into
shell functions and stored in scripts/. The converter is written
in Python as standard for QEMU, and this commit contains a stub.
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Options such as "--enable-capstone=git" do not make much sense when building
from a tarball. Accept "internal" for consistency with the meson options.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The options were deprecated in 6.0. That said, we do not really have a
formal deprecation cycle for build-time changes, since they do not affect
users.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson already has its own logic to find the "ar" binary, so remove the
Solaris specific check.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add meson feature options for Spice and Spice protocol, and move
detection logic out of configure.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007102453.978041-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211007130829.632254-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the pthreads check dead in configure, so remove it
as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-9-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove some special cases by moving them to Meson.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to pass it in config-host.mak.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007130829.632254-6-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is just a constant string, there is no need to pass it in config-host.mak.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007130829.632254-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the suffix directly in trace/simple.c, so that quoting is done
properly by Meson.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Oleinik <alxndr@bu.edu>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211007130829.632254-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle the choice of audio drivers the same as all other dependencies.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings a change that makes audio drivers more similar to all
other modules. All drivers are built by default, while
--audio-drv-list only governs the default choice of the audio driver.
Meson options are added to disable the drivers, and the next patches
will fix the help messages and command line options, and especially
make the non-default drivers available via -audiodev.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ever since winwaveaudio was removed in 2015, CONFIG_AUDIO_WIN_INT
is only set if dsound is in use, so use CONFIG_AUDIO_DSOUND directly.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130630.632028-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OSS is a kernel API, so the option should not be needed. The library
is used on NetBSD, where OSS is emulated, so keep the variable.
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130630.632028-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many cases you would want to do this but one is if you
want to use a test friendly compiler like gcc instead of a system
compiler like clang. Either way we should honour the users choice if
they have made it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Warner Losh <imp@bsdimp.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210917162332.3511179-2-alex.bennee@linaro.org>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flags that choose the target architecture, such as -m32 on x86, affect
all invocations of the compiler driver, for example including options
such as --print-search-dirs. To ensure that they are treated as such,
place them in the cross file in the [binaries] section instead of
including them in QEMU_CFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As discussed in issue 614, we're shipping GCC 7.4.0 as the
system compiler in NetBSD 9, the most recent stable branch,
and are still actively interested in QEMU on this platform.
The differences between GCC 7.5.0 and 7.4.0 are trivial.
Signed-off-by: Nia Alarie <nia@NetBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <YVcpe79I0rly1HJh@homeworld.netbsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that a link to pc-bios/qemu_vga.ndrv is added to the build tree,
otherwise the optional MacOS client driver will not be loaded by OpenBIOS
when launching QEMU directly from the build directory.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210831165020.84855-1-programmingkidx@gmail.com>
[lv: commit message rewording as suggested by Mark]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The GBM library detection does not need to be in the configure script,
since it does not have any user-facing options (there are no
--enable-gbm or --disable-gbm switches). Let's move it to meson.build
instead, so we don't have to clutter config-host.mak with the related
switches.
Additionally, only check for GBM if it is really required, i.e. if we
either compile with OpenGL or with virglrenderer support.
Message-Id: <20210714085045.797168-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Mac --enable-modules and --enable-plugins are currently incompatible, because the
Apple -Wl,-exported_symbols_list command line options prevents the export of any
symbols needed by the modules. On x86 -Wl,--dynamic-list does not have this effect,
but only because the -Wl,--export-dynamic option provided by gmodule-2.0.pc overrides
it. On Apple there is no -Wl,--export-dynamic, because it is the default, and thus
no override.
Either way, when modules are active there is no reason to include the plugin_ldflags.
While at it, avoid the useless -Wl,--export-dynamic when --enable-plugins is
specified but --enable-modules is not; this way, the GNU and Apple configurations
are more similar.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/516
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: fix noexport to no-export]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210811100550.54714-1-pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
By default, -fsanitize=fuzzer instruments all code with coverage
information. However, this means that libfuzzer will track coverage over
hundreds of source files that are unrelated to virtual-devices. This
means that libfuzzer will optimize inputs for coverage observed in timer
code, memory APIs etc. This slows down the fuzzer and stores many inputs
that are not relevant to the actual virtual-devices.
With this change, clang versions that support the
"-fsanitize-coverage-allowlist" will only instrument a subset of the
compiled code, that is directly related to virtual-devices.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
When using clang, we get
ERROR: configure test passed without -Werror but failed with -Werror.
This is probably a bug in the configure script. The failing command
will be at the bottom of config.log.
You can run configure with --disable-werror to bypass this check.
What we really want from these two tests is whether the
entire code sequence is supported, including pragmas.
Adding -Werror makes the test properly fail for clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210719200112.295316-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Haiku does not support compiling with -fpie. See the discussion here
for details:
https://discuss.haiku-os.org/t/qemu-on-haiku-sdl-issue/10961/6?u=rjzak
Signed-off-by: Richard Zak <richard.j.zak@gmail.com>
Message-Id: <CAOakUfM8zMpYiAEn-_f9s1DHdVB-Bq9fGMM=Hfr8hJW9ra6aWw@mail.gmail.com>
[thuth: Tweaked title and patch description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Missed in commit f3478392 "docs: Move deprecation, build
and license info out of system/"
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723065828.1336760-1-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It was pointed out in review of the previous patch that the if leg
isn't needed as the for loop will not enter on an empty $device_archs.
Fixes: d1d5e9eefd ("configure: allow the selection of alternate config in the build")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210720232703.10650-5-alex.bennee@linaro.org>
The vhost_kernel and vhost_vdpa variables should be pre-initialized with
the $default_feature setting so that these features get disabled when
the user runs the configure scripts with --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "xen" variable should either contain "enabled", "disabled" or
nothing (for auto detection). But when the user currently runs the
configure script with --without-default-features, it gets set to
"no" instead. This does not work as expected, the feature will still
be enabled if the Xen headers are present. Thus set the variable
to "disabled" instead if default_feature switch has been set.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no reason why we should keep VNC enabled when the user
specified --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A typo prevents that many features get disabled when the user
runs "configure" with the --without-default-features switch.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We recently bumped our requirement for Clang to at least version 6.0.
And according to:
https://releases.llvm.org/6.0.0/tools/clang/docs/AttributeReference.html
Clang v6.0 supports the alloc_size attribute. Thus we can drop this
check in the configure script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210714072855.785566-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now require c11, so the fallbacks are now dead code
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently, the block driver whitelists are only applied for the system
emulator. All other binaries still give unrestricted access to all block
drivers. There are use cases where this made sense because the main
concern was avoiding customers running VMs on less optimised block
drivers and getting bad performance. Allowing the same image format e.g.
as a target for 'qemu-img convert' is not a problem then.
However, if the concern is the supportability of the driver in general,
either in full or when used read-write, not applying the list driver
whitelist in tools doesn't help - especially since qemu-nbd and
qemu-storage-daemon now give access to more or less the same operations
in block drivers as running a system emulator.
In order to address this, introduce a new configure option that enforces
the driver whitelist in all binaries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210709164141.254097-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a user is trying to compile QEMU with link-time optimization
enabled by running the configure script like this:
.../configure --extra-cflags="-flto"
then the endianess test is failing since the magic values do not
show up in the intermediate object files there. If the host is
a big endian machine (like s390x), the QEMU binary is then unusable
since the corresponding variable "bigendian" is pre-initialized
with "no".
To fix this issue, we should rather create a full binary and look
for the magic strings there instead.
And we really should not continue the build if the endianess check
failed, to make it clear right from the start that something went
wrong here, thus let's also add some "exit 1" statements here
after emitting the error message.
Message-Id: <20210715083928.933806-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Aside from a minor bloat to file size the ability to have TCG plugins
has no real impact on performance unless a plugin is actively loaded.
Even then the libempty.so plugin shows only a minor degradation in
performance caused by the extra book keeping the TCG has to do to keep
track of instructions. As it's a useful feature lets just enable it by
default and reduce our testing matrix a little.
We need to move our linker testing earlier so we can be sure we can
enable the loader module required. As we have ruled out static &
plugins in an earlier patch we can also reduce the indent a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210709143005.1554-33-alex.bennee@linaro.org>
There are some patches on the list that enable plugins on Windows but
they still need some changes to be ready:
https://patchew.org/QEMU/20201013002806.1447-1-luoyonggang@gmail.com/
In the meantime lets stop the user from being able to configure the
support so they don't get confused by the weird linker error messages
later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20210709143005.1554-32-alex.bennee@linaro.org>
Moving this check earlier will make the later re-factor for enabling
by default a bit neater.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210709143005.1554-31-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210709143005.1554-30-alex.bennee@linaro.org>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the default config works well enough it does end up enabling a
lot of stuff. For more minimal builds we can select a different list
of devices and let Kconfig work out what we want. For example:
../../configure --without-default-features \
--target-list=arm-softmmu,aarch64-softmmu \
--with-devices-aarch64=minimal
will override the aarch64-softmmu default set of devices with a more
minimal set of devices that just enables the virt and sbsa-ref models.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-6-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for offering variation to our build configurations lets
move everything and rename it to default. Common included base configs
are also renamed.
During the cleanup the stale usb.mak and pci.mak references were
removed from MAINTAINERS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-5-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some reason, libpmem option setting was set to work in an opposite
way (--enable-libpmem disabled it and vice versa). Fixing this so
configuration works properly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210707075144.82717-1-mrezanin@redhat.com>
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some reason, libdaxctl option setting was set to work in an opposite
way (--enable-libdaxctl disabled it and vice versa). Fixing this so
configuration works properly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707063124.81954-1-mrezanin@redhat.com>
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused. They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And remove them from the summary, since now their outcome is verbosely
included in the meson output.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All currently supported distros have vte 0.37 or newer, which is where the
ABI changed from 2.90 to 2.91. So drop support for the older ABI.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it depend on gnutls too, since it is only used as part of gnutls
tests.
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All XTS configuration uses qemu_private_xts. Drop other variables as
they have only ever been used to generate the summary (which has since
been moved to meson.build).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
-----BEGIN PGP SIGNATURE-----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=bMQp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210621' into staging
s390x update:
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
# gpg: Signature made Mon 21 Jun 2021 10:53:00 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210621: (37 commits)
s390x/css: Add passthrough IRB
s390x/css: Refactor IRB construction
s390x/css: Split out the IRB sense data
s390x/css: Introduce an ESW struct
linux-user/s390x: Save and restore psw.mask properly
target/s390x: Use s390_cpu_{set_psw, get_psw_mask} in gdbstub
target/s390x: Improve s390_cpu_dump_state vs cc_op
target/s390x: Do not modify cpu state in s390_cpu_get_psw_mask
target/s390x: Expose load_psw and get_psw_mask to cpu.h
configure: Check whether we can compile the s390-ccw bios with -msoft-float
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
s390x/tcg: We support Vector enhancements facility
linux-user: elf: s390x: Prepare for Vector enhancements facility
s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
s390x/tcg: Implement VECTOR FP NEGATIVE MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement 32/128 bit for VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement 128 bit for VECTOR FP LOAD ROUNDED
s390x/tcg: Implement 64 bit for VECTOR FP LOAD LENGTHENED
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The -msoft-float switch is not available in older versions of Clang.
Since we rely on the compiler to not generate floating point instructions
unexpectedly, we block those old compilers now via a test in the configure
script. Note that for some weird reasons, the Clang compiler only complains
about the missing soft-float support if no other flags are passed via
"-Wl,..." to the linker. So we have to use "compile_object" instead of
"compile_prog" for this check.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210525142032.156989-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
_sigev_un._tid is an internal glibc field and is not available on
musl libc. The sigevent(7) man page and Linux UAPI headers both use
sigev_notify_thread_id as a public way to access this field.
musl libc supports this field since 1.2.2[0], and glibc plans to
add support as well[1][2].
If sigev_notify_thread_id is not available, fall back to _sigev_un._tid
as before.
[0] http://git.musl-libc.org/cgit/musl/commit/?id=7c71792e87691451f2a6b76348e83ad1889f1dcb
[1] https://www.openwall.com/lists/musl/2019/08/01/5
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27417
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035556.7931-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The longest test at the moment seems to be a (slower)
aarch64 host, for which test-mmap takes 64 seconds.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
_Static_assert is part of C11, which is now required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the minimum gcc version is 7.5, we can use C11.
This will allow lots of cleanups to the code, currently
hidden behind macros in include/qemu/compiler.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The meson.build file defines supported_cpus which does not contain
x32, and x32 is not one of meson's stable built-in values:
https://mesonbuild.com/Reference-tables.html#cpu-families
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Message-Id: <878s3jrzm0.fsf@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added function that loads RSS eBPF program.
Added stub functions for RSS eBPF loader.
Added meson and configuration options.
By default, eBPF feature enabled if libbpf is present in the build system.
libbpf checked in configuration shell script and meson script.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required CLang version.
Per repology, currently shipping versions are:
RHEL-8: 10.0.1
Debian Buster: 7.0.1
openSUSE Leap 15.2: 9.0.1
Ubuntu LTS 18.04: 6.0.0
Ubuntu LTS 20.04: 10.0.0
FreeBSD 12: 8.0.1
Fedora 33: 11.0.0
Fedora 34: 11.1.0
With this list Ubuntu LTS 18.04 is the constraint at 6.0.0
An LLVM version of 6.0.0 corresponds to macOS XCode version of 10.0
which dates from Sept 2018.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-13-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required GCC version.
Per repology, currently shipping versions are:
RHEL-8: 8.3.1
Debian Buster: 8.3.0
openSUSE Leap 15.2: 7.5.0
Ubuntu LTS 18.04: 7.5.0
Ubuntu LTS 20.04: 9.3.0
FreeBSD: 10.3.0
Fedora 33: 9.2.0
Fedora 34: 11.0.1
OpenBSD: 8.4.0
macOS HomeBrew: 11.1.0
With this list Ubuntu LTS 18.04 / openSUSE Leap 15.2 are the
constraint at 7.5.0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-12-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The glib version was not previously constrained by RHEL-7 since it
rebases fairly often. Instead SLES 12 and Ubuntu 16.04 were the
constraints in 00f2cfbbec. Both of
these are old enough that they are outside our platform support
matrix now.
Per repology, current shipping versions are:
RHEL-8: 2.56.4
Debian Buster: 2.58.3
openSUSE Leap 15.2: 2.62.6
Ubuntu LTS 18.04: 2.56.4
Ubuntu LTS 20.04: 2.64.6
FreeBSD: 2.66.7
Fedora 33: 2.66.8
Fedora 34: 2.68.1
OpenBSD: 2.68.1
macOS HomeBrew: 2.68.1
Thus Ubuntu LTS 18.04 / RHEL-8 are the constraint for GLib version
at 2.56
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-11-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gnutls version
Per repology, current shipping versions are:
RHEL-8: 3.6.14
Debian Buster: 3.6.7
openSUSE Leap 15.2: 3.6.7
Ubuntu LTS 18.04: 3.5.18
Ubuntu LTS 20.04: 3.6.13
FreeBSD: 3.6.15
Fedora 33: 3.6.16
Fedora 34: 3.7.1
OpenBSD: 3.6.15
macOS HomeBrew: 3.6.15
Ubuntu LTS 18.04 has the oldest version and so 3.5.18 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-7-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gcrypt version and
assume that HMAC is always supported
Per repology, current shipping versions are:
RHEL-8: 1.8.5
Debian Buster: 1.8.4
openSUSE Leap 15.2: 1.8.2
Ubuntu LTS 18.04: 1.8.1
Ubuntu LTS 20.04: 1.8.5
FreeBSD: 1.9.2
Fedora 33: 1.8.6
Fedora 34: 1.9.3
OpenBSD: 1.9.3
macOS HomeBrew: 1.9.3
Ubuntu LTS 18.04 has the oldest version and so 1.8.0 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-6-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required nettle version and
drop a lot of backwards compatibility code for 2.x series of nettle.
Per repology, current shipping versions are:
RHEL-8: 3.4.1
Debian Buster: 3.4.1
openSUSE Leap 15.2: 3.4.1
Ubuntu LTS 18.04: 3.4
Ubuntu LTS 20.04: 3.5.1
FreeBSD: 3.7.2
Fedora 33: 3.5.1
Fedora 34: 3.7.2
OpenBSD: 3.7.2
macOS HomeBrew: 3.7.2
Ubuntu LTS 18.04 has the oldest version and so 3.4 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-4-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. So from the RHEL-7 perspective, we do not have to support
libssh v0.7 anymore now.
Let's look at the versions from other distributions and operating
systems - according to repology.org, current shipping versions are:
RHEL-8: 0.9.4
Debian Buster: 0.8.7
openSUSE Leap 15.2: 0.8.7
Ubuntu LTS 18.04: 0.8.0 *
Ubuntu LTS 20.04: 0.9.3
FreeBSD: 0.9.5
Fedora 33: 0.9.5
Fedora 34: 0.9.5
OpenBSD: 0.9.5
macOS HomeBrew: 0.9.5
HaikuPorts: 0.9.5
* The version of libssh in Ubuntu 18.04 claims to be 0.8.0 from the
name of the package, but in reality it is a 0.7 patched up as a
Frankenstein monster with patches from the 0.8 development branch.
This gave us some headaches in the past already and so it never worked
with QEMU. All attempts to get it supported have failed in the past,
patches for QEMU have never been merged and a request to Ubuntu to
fix it in their 18.04 distro has been ignored:
https://bugs.launchpad.net/ubuntu/+source/libssh/+bug/1847514
Thus we really should ignore the libssh in Ubuntu 18.04 in QEMU, too.
Fix it by bumping the minimum libssh version to something that is
greater than 0.8.0 now. Debian Buster and openSUSE Leap have the
oldest version and so 0.8.7 is the new minimum.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210519155859.344569-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with --disable-system there is a harmless yet still
annoying error message at the end of the "configure" step:
sed: can't read *-config-devices.h: No such file or directory
When only building the tools or docs, without any emulator at all,
there is even an additional message about missing *-config-target.h
files.
Fix it by checking whether any of these files are available before
using them.
Fixes: e0447a834d ("configure: Poison all current target-specific #defines")
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210519113840.298174-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now --with-git-submodules=ignore has a subtle difference from
just running without a .git directory, in that it does not check
that submodule sources actually exist. Move the check for
ui/keycodemapdb/README so that it happens even if the user
specified --with-git-submodules=ignore, with a customized
error message that is more suitable for this situation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210512045821.3257963-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When implementing spice vdagent protocol in qemu we only need the
spice-protocol package for that, spice-server is not needed. So
go split those two build dependencies.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-2-kraxel@redhat.com>
Otherwise you run into hilarity like trying when cross compiling a 32
bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
test cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-32-alex.bennee@linaro.org>
this is needed by the tricore-tcg-tests as tricore-gcc is not easily
available. Thus we rely on the HOST_CC to do the preprocessing of the
tricore assembly files.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-6-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-16-alex.bennee@linaro.org>
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen",
and it does not pass test -x (which does not walk the path).
Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1
assignment in tests/qtest/meson.build uses an empty string as the
command, and fails very eloquently:
../tests/qtest/meson.build:92:2: ERROR: No program name specified.
Use the "has" function instead of test -x, and fix the generation
of config-host.mak since meson.build expects that GDBUS_CODEGEN
is absent, rather than empty, if the tool is unavailable.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: #178
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix ECKD booting with null block numbers in the chain
-----BEGIN PGP SIGNATURE-----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=Gg+4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging
* Make the s390-ccw bios compilable with Clang
* Fix ECKD booting with null block numbers in the chain
# gpg: Signature made Mon 10 May 2021 08:27:34 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10:
pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes
pc-bios/s390-ccw: Allow building with Clang, too
pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning
pc-bios/s390-ccw: Fix the cc-option macro in the Makefile
pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn
pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker
pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer
pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang
pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Usually Meson uses pre-serialized information in meson-private to
speed up re-runs. This is not possible for version changes, where
Meson instead rebuilds the serialized information using cmd_line.txt.
In some cases cmd_line.txt can contain stale information, since it
is not rebuild except when "meson setup" is invoked. Update it in
the configure script to allow upgrading our Meson version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Commit "c87ea11631 configure: add --without-default-features" use
default_feature to set default values for configure option. This value
is used for EXESUF too.
However, EXESUF is not option to be tested, it is just append to any
binary name so using --without-default-features set EXESUF to "n"o and
all binaries using it has form <name>no (e.g. qemu-imgno).
This is not expected behavior as disabling features should not cause
generating different binary names.
Reverting back to setting EXESUF to empty value unless needed otherwise.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210331081845.105089-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test for 128-bit atomics is causing trouble with FreeBSD 12.2 and
--enable-werror:
cc -Werror -fPIE -DPIE -std=gnu99 -Wall -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-string-plus-int -Wno-typedef-redefinition -Wno-tautological-type-limit-compare -fstack-protector-strong -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -pie -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong
config-temp/qemu-conf.c:4:7: error: implicit declaration of function '__atomic_load_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:5:3: error: implicit declaration of function '__atomic_store_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_store_16(&x, y, 0);
^
config-temp/qemu-conf.c:5:3: note: did you mean '__atomic_load_16'?
config-temp/qemu-conf.c:4:7: note: '__atomic_load_16' declared here
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:6:3: error: implicit declaration of function '__atomic_compare_exchange_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
^
3 errors generated.
Looking for they way we are using atomic functions in QEMU, we are not
using these functions with the _16 suffix anyway. Switch to the same
functions that we use in the include/qemu/atomic.h header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210317110512.583747-2-thuth@redhat.com>
Message-Id: <20210323165308.15244-12-alex.bennee@linaro.org>
In bbc17caf81, we used an alias attribute to allow target_page
to be declared const, and yet be initialized late.
This fails when using LTO with several versions of gcc.
The compiler looks through the alias and decides that the const
variable is statically initialized to zero, then propagates that
zero to many uses of the variable.
This can be avoided by compiling one object file with -fno-lto.
In this way, any initializer cannot be seen, and the constant
propagation does not occur.
Since we are certain to have this separate compilation unit, we
can drop the alias attribute as well. We simply have differing
declarations for target_page in different compilation units.
Drop the use of init_target_page, and drop the configure detection
for CONFIG_ATTRIBUTE_ALIAS.
In order to change the compilation flags for a file with meson,
we must use a static_library. This runs into specific_ss, where
we would need to create many static_library instances.
Fix this by splitting page-vary.c: the page-vary-common.c part is
compiled once as a static_library, while the page-vary.c part is
left in specific_ss in order to handle the target-specific value
of TARGET_PAGE_BITS_MIN.
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org>
[PMD: Fix typo in subject, split original patch in 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20210322112427.4045204-4-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now, compilation of util/dbus is implicit and depends
on libgio presence on the building host.
The patch adds options to manage libgio dependencies explicitly.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210312151440.405776-1-den-plotnikov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With --enable-fuzzing, QEMU_CFLAGS include -fsanitize=fuzzer-no-link.
This should allow us to build non-fuzzer binaries using objects
instrumented for fuzzing. However, to do that, we also need to link with
-fsanitize=fuzzer-no-link. We were not doing that.
Reported-by: Li Qiang <liq3ea@163.com>,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210221174510.22542-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add configuration options to enable or disable multiprocess QEMU code
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cc37253e35418ebd7b675a31a3df6e3c7a12dc1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Users might want to enable all features, without realizing some
features have negative effect. Mention the TCI feature is slow
and experimental, hoping it will be selected knowingly.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210125144530.2837481-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SVE, currently the bulk of the GDB TCG tests, we need at least GDB
9.1 to support the "ieee_half" data type we report. This only affects
when GDB tests are run; users can still use lower versions of gdb as
long as they aren't talking to an SVE enabled model. The work around
is to either get a newer gdb or disable SVE for their CPU model.
Reported-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210202134001.25738-9-alex.bennee@linaro.org>
When checking GDB versions we have to tolerate all sorts of random
distro extensions to the version string. While we already attempt to
do some of that before we call version_ge is makes sense to try and
regularise the first input by stripping extraneous -'s. While we at it
convert the old-style shell quoting into a cleaner form t shut up my
editors linter lest it confuse me by underlining the whole line.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202134001.25738-8-alex.bennee@linaro.org>
The configure option was backward, and we failed to
pass the value on to meson.
Fixes: 23a77b2d18 ("build-system: clean up TCG/TCI configury")
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A workaround added in early days of 64-bit OSX forced x86_64 if the
host machine had 64-bit support. This creates issues when cross-
compiling for ARM64. Additionally, the user can always use --cpu=* to
manually set the host CPU and therefore this workaround should be
removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-12-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On iOS there is no CoreAudio, so we should not assume Darwin always
has it.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-11-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-9-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add objc to the Meson cross file as well as detection of Darwin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-8-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Meson will find CoreFoundation, IOKit, and Cocoa as needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-7-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The iOS toolchain does not use the host prefix naming convention. So we
need to enable cross-compile options while allowing the PREFIX to be
blank.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-3-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the preadv availability check to meson.build. This is what we
want to be doing for host-OS-feature-checks anyway, but it also fixes
a problem with building for macOS with the most recent XCode SDK on a
Catalina host.
On that configuration, 'preadv()' is provided as a weak symbol, so
that programs can be built with optional support for it and make a
runtime availability check to see whether the preadv() they have is a
working one or one which they must not call because it will
runtime-assert. QEMU's configure test passes (unless you're building
with --enable-werror) because the test program using preadv()
compiles, but then QEMU crashes at runtime when preadv() is called,
with errors like:
dyld: lazy symbol binding failed: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
dyld: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
Meson's own function availability check has a special case for macOS
which adds '-Wl,-no_weak_imports' to the compiler flags, which forces
the test to require the real function, not the macOS-version-too-old
stub.
So this commit fixes the bug where macOS builds on Catalina currently
require --disable-werror.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210126155846.17109-1-peter.maydell@linaro.org
