bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This fixes devices like IDE that can still start new requests from I/O
handlers in the CPU thread while the block backend is drained.
The basic assumption is that in a drain section, no new requests should
be allowed through a BlockBackend (blk_drained_begin/end don't exist,
we get drain sections only on the node level). However, there are two
special cases where requests should not be queued:
1. Block jobs: We already make sure that block jobs are paused in a
drain section, so they won't start new requests. However, if the
drain_begin is called on the job's BlockBackend first, it can happen
that we deadlock because the job stays busy until it reaches a pause
point - which it can't if its requests aren't processed any more.
The proper solution here would be to make all requests through the
job's filter node instead of using a BlockBackend. For now, just
disabling request queuing on the job BlockBackend is simpler.
2. In test cases where making requests through bdrv_* would be
cumbersome because we'd need a BdrvChild. As we already got the
functionality to disable request queuing from 1., use it in tests,
too, for convenience.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
mirror_top_bs is currently implicitly drained through its connection to
the source or the target node. However, the drain section for target_bs
ends early after moving mirror_top_bs from src to target_bs, so that
requests can already be restarted while mirror_top_bs is still present
in the chain, but has dropped all permissions and therefore runs into an
assertion failure like this:
qemu-system-x86_64: block/io.c:1634: bdrv_co_write_req_prepare:
Assertion `child->perm & BLK_PERM_WRITE' failed.
Keep mirror_top_bs drained until all graph changes have completed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In write-blocking mode, all writes to the top node directly go to the
target. We must only mirror chunks of data that are aligned to the
job's granularity, because that is how the dirty bitmap works.
Therefore, the request alignment for writes must be the job's
granularity (in write-blocking mode).
Unfortunately, this forces all reads and writes to have the same
granularity (we only need this alignment for writes to the target, not
the source), but that is something to be fixed another time.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190805153308.2657-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: d06107ade0
Signed-off-by: Max Reitz <mreitz@redhat.com>
The commit and the mirror block job must be able to drop their filter
node at any point. However, this will not be possible if any of the
BdrvChild links to them is frozen. Therefore, we need to prevent them
from ever becoming frozen.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch is used in the 'block/stream: introduce a bottom node'
that is following. Instead of the base node, the caller may pass
the node that has the base as its backing image to the function
bdrv_is_allocated_above() with a new parameter include_base = true
and get rid of the dependency on the base that may change during
commit/stream parallel jobs. Now, if the specified base is not
found in the backing image chain, the QEMU will abort.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Squashed in the following as a rebase on conflicting patches:]
Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE. Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().
The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary. No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror and commit block jobs use bdrv_set_aio_context() to move
their filter node into the right AioContext before hooking it up in the
graph. Similarly, bdrv_open_backing_file() explicitly moves the backing
file node into the right AioContext first.
This isn't necessary any more, they get automatically moved into the
right context now when attaching them.
However, in the case of bdrv_open_backing_file() with a node reference,
it's actually not only unnecessary, but even wrong: The unchecked
bdrv_set_aio_context() changes the AioContext of the child node even if
other parents require it to retain the old context. So this is not only
a simplification, but a bug fix, too.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1684342
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block jobs require that all of the nodes the job is using are in the
same AioContext. Therefore all BdrvChild objects of the job propagate
.(can_)set_aio_context to all other job nodes, so that the switch is
checked and performed consistently even if both nodes are in different
subtrees.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter drivers that support .bdrv_co_pwrite_zeroes can safely advertise
BDRV_REQ_NO_FALLBACK because they just forward the request flags to
their child node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
While child_job_drained_begin() calls to job_pause(), the job doesn't
actually transition between states until it runs again and reaches a
pause point. This means bdrv_drained_begin() may return with some jobs
using the node still having 'busy == true'.
As a consequence, block_job_detach_aio_context() may get into a
deadlock, waiting for the job to be actually paused, while the coroutine
servicing the job is yielding and doesn't get the opportunity to get
scheduled again. This situation can be reproduced by issuing a
'block-commit' immediately followed by a 'device_del'.
To ensure bdrv_drained_begin() only returns when the jobs have been
paused, we change mirror_drained_poll() to only confirm it's quiesced
when job->paused == true and there aren't any in-flight requests, except
if we reached that point by a drained section initiated by the
mirror/commit job itself.
The other block jobs shouldn't need any changes, as the default
drained_poll() behavior is to only confirm it's quiesced if the job is
not busy or completed.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_refresh_filename() should invoke itself recursively on all
children, not just on file.
With that change, we can remove the manual invocations in blkverify,
quorum, commit, mirror, and blklogwrites.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The mirror_start_job() function used for the commit-active job blocks
the source, target and all intermediate nodes for the duration of the
job.
target <- intermediate <- source
Since 4ef85a9c23 this function creates a dummy mirror_top_bs that
goes on top of the source node, and it is this dummy node that gets
blocked instead. The source node is never blocked or added to the
job's list of nodes.
target <- intermediate <- source <- mirror_top
At the moment I don't think it is possible to exploit this problem
because any additional job on 'source' would either be forbidden for
other reasons or it would need to involve an additional node that is
blocked, causing an error.
This can be seen in the error messages, however, because they never
refer to the source node being blocked:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-io -c 'write 0 1M' hd0.qcow2
$ $QEMU -drive if=none,file=hd1.qcow2,node-name=hd1
{ "execute": "qmp_capabilities" }
{ "execute": "block-commit", "arguments": {"device": "hd1", "speed": 256}}
{ "execute": "block-stream", "arguments": {"device": "hd1"}}
{ "error": {"class": "GenericError",
"desc": "Node 'hd0' is busy: block device is in use by block job: commit"}}
After this patch the error message refers to 'hd1', as it should.
The expected output of iotest 141 also needs to be updated for the
same reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the moment I don't see how to make this function fail after the
dirty bitmap has been created, but if that was possible then we would
hit the assert(QLIST_EMPTY(&bs->dirty_bitmaps)) in bdrv_close().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_dirty_bitmap_next_dirty_area() instead of
bdrv_dirty_iter_next_area(), because of the following problems of
bdrv_dirty_iter_next_area():
1. Using HBitmap iterators we should carefully handle unaligned offset,
as first call to hbitmap_iter_next() may return a value less than
original offset (actually, it will be original offset rounded down to
bitmap granularity). This handling is not done in
do_sync_target_write().
2. bdrv_dirty_iter_next_area() handles unaligned max_offset
incorrectly:
look at the code:
if (max_offset == iter->bitmap->size) {
/* If max_offset points to the image end, round it up by the
* bitmap granularity */
gran_max_offset = ROUND_UP(max_offset, granularity);
} else {
gran_max_offset = max_offset;
}
ret = hbitmap_iter_next(&iter->hbi, false);
if (ret < 0 || ret + granularity > gran_max_offset) {
return false;
}
and assume that max_offset != iter->bitmap->size but still unaligned.
if 0 < ret < max_offset we found dirty area, but the function can
return false in this case (if ret + granularity > max_offset).
3. bdrv_dirty_iter_next_area() uses inefficient loop to find the end of
the dirty area. Let's use more efficient hbitmap_next_zero instead
(bdrv_dirty_bitmap_next_dirty_area() do so)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marking a function coroutine_fn currently has no effect on the compiler,
but it documents that this function must be called from coroutine
context and it may yield. This is important information for the
programmer.
Also, if we ever transition to a stackless coroutine implementation,
then it's likely that the annotation will become mandatory so the
compiler can use the correct calling convention for coroutine functions.
Cc: Max Reitz <mreitz@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'block-commit' QMP command is implemented internally using two
different drivers. If the source image is the active layer then the
mirror driver is used (commit_active_start()), otherwise the commit
driver is used (commit_start()).
In both cases the destination image must be put temporarily in
read-write mode. This is done correctly in the latter case, but what
commit_active_start() does is copy all flags instead.
This patch replaces the bdrv_reopen() calls in that function with
bdrv_reopen_set_read_only() so that only the read-only status is
changed.
A similar change is made in mirror_exit(), which is also used by the
'drive-mirror' and 'blockdev-mirror' commands.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let start from the beginning:
Commit b9e413dd37 (in 2.9)
"block: explicitly acquire aiocontext in aio callbacks that need it"
added pairs of aio_context_acquire/release to mirror_write_complete and
mirror_read_complete, when they were aio callbacks for blk_aio_* calls.
Then, commit 2e1990b26e (in 3.0) "block/mirror: Convert to coroutines"
dropped these blk_aio_* calls, than mirror_write_complete and
mirror_read_complete are not callbacks more, and don't need additional
aiocontext acquiring. Furthermore, mirror_read_complete calls
blk_co_pwritev inside these pair of aio_context_acquire/release, which
leads to the following dead-lock with mirror:
(gdb) info thr
Id Target Id Frame
3 Thread (LWP 145412) "qemu-system-x86" syscall ()
2 Thread (LWP 145416) "qemu-system-x86" __lll_lock_wait ()
* 1 Thread (LWP 145411) "qemu-system-x86" __lll_lock_wait ()
(gdb) bt
#0 __lll_lock_wait ()
#1 _L_lock_812 ()
#2 __GI___pthread_mutex_lock
#3 qemu_mutex_lock_impl (mutex=0x561032dce420 <qemu_global_mutex>,
file=0x5610327d8654 "util/main-loop.c", line=236) at
util/qemu-thread-posix.c:66
#4 qemu_mutex_lock_iothread_impl
#5 os_host_main_loop_wait (timeout=480116000) at util/main-loop.c:236
#6 main_loop_wait (nonblocking=0) at util/main-loop.c:497
#7 main_loop () at vl.c:1892
#8 main
Printing contents of qemu_global_mutex, I see that "__owner = 145416",
so, thr1 is main loop, and now it wants BQL, which is owned by thr2.
(gdb) thr 2
(gdb) bt
#0 __lll_lock_wait ()
#1 _L_lock_870 ()
#2 __GI___pthread_mutex_lock
#3 qemu_mutex_lock_impl (mutex=0x561034d25dc0, ...
#4 aio_context_acquire (ctx=0x561034d25d60)
#5 dma_blk_cb
#6 dma_blk_io
#7 dma_blk_read
#8 ide_dma_cb
#9 bmdma_cmd_writeb
#10 bmdma_write
#11 memory_region_write_accessor
#12 access_with_adjusted_size
#15 flatview_write
#16 address_space_write
#17 address_space_rw
#18 kvm_handle_io
#19 kvm_cpu_exec
#20 qemu_kvm_cpu_thread_fn
#21 qemu_thread_start
#22 start_thread
#23 clone ()
Printing mutex in fr 2, I see "__owner = 145411", so thr2 wants aio
context mutex, which is owned by thr1. Classic dead-lock.
Then, let's check that aio context is hold by mirror coroutine: just
print coroutine stack of first tracked request in mirror job target:
(gdb) [...]
(gdb) qemu coroutine 0x561035dd0860
#0 qemu_coroutine_switch
#1 qemu_coroutine_yield
#2 qemu_co_mutex_lock_slowpath
#3 qemu_co_mutex_lock
#4 qcow2_co_pwritev
#5 bdrv_driver_pwritev
#6 bdrv_aligned_pwritev
#7 bdrv_co_pwritev
#8 blk_co_pwritev
#9 mirror_read_complete () at block/mirror.c:232
#10 mirror_co_read () at block/mirror.c:370
#11 coroutine_trampoline
#12 __start_context
Yes it is mirror_read_complete calling blk_co_pwritev after acquiring
aio context.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For purposes of minimum code movement, refactor the mirror_exit
callback to use the post-finalization callbacks in a trivial way.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180906130225.5118-7-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Added comment for the mirror_exit() function]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In cases where we abort the block/mirror job, there's no point in
installing the new backing chain before we finish aborting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180906130225.5118-6-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add support for taking and passing forward job creation flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-3-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the manual deferment to mirror_exit into the implicit
callback to job_exit and the mirror_exit callback.
This does change the order of some bdrv_unref calls and job_completed,
but thanks to the new context in which we call .exit, this is safe to
defer the possible flushing of any nodes to the job_finalize_single
cleanup stage.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-6-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs presently use both an Error object in the case of the create job,
and char strings in the case of generic errors elsewhere.
Unify the two paths as just j->err, and remove the extra argument from
job_completed. The integer error code for job_completed is kept for now,
to be removed shortly in a separate patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-3-jsnow@redhat.com
[mreitz: Dropped a superfluous g_strdup()]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Presently we codify the entry point for a job as the "start" callback,
but a more apt name would be "run" to clarify the idea that when this
function returns we consider the job to have "finished," except for
any cleanup which occurs in separate callbacks later.
As part of this clarification, change the signature to include an error
object and a return code. The error ptr is not yet used, and the return
code while captured, will be overwritten by actions in the job_completed
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-2-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
.bdrv_close handler is optional after previous commit, no needs to keep
empty functions more.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.
While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.
So just check for this scenario and error out.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Other I/O functions are already using a BdrvChild pointer in the API, so
make discard do the same. It makes it possible to initiate the same
permission checks before doing I/O, and much easier to share the
helper functions for this, which will be added and used by write,
truncate and copy range paths.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs. Currently, this setting will
remain constant for the duration of the entire block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements active synchronous mirroring. In active mode, the
passive mechanism will still be in place and is used to copy all
initially dirty clusters off the source disk; but every write request
will write data both to the source and the target disk, so the source
cannot be dirtied faster than data is mirrored to the target. Also,
once the block job has converged (BLOCK_JOB_READY sent), source and
target are guaranteed to stay in sync (unless an error occurs).
Active mode is completely optional and currently disabled at runtime. A
later patch will add a way for users to enable it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to access the block job data when the mirror block
driver becomes more complex.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With this, the mirror_top_bs is no longer just a technically required
node in the BDS graph but actually represents the block job operation.
Also, drop MirrorBlockJob.source, as we can reach it through
mirror_top_bs->backing.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch makes the mirror code differentiate between simply waiting
for any operation to complete (mirror_wait_for_free_in_flight_slot())
and specifically waiting for all operations touching a certain range of
the virtual disk to complete (mirror_wait_on_conflicts()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Attach a CoQueue to each in-flight operation so if we need to wait for
any we can use it to wait instead of just blindly yielding and hoping
for some operation to wake us.
A later patch will use this infrastructure to allow requests accessing
the same area of the virtual disk to specifically wait for each other.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to talk to the source BDS (and maybe in the future to the
target BDS as well) directly, we need to convert our existing AIO
requests into coroutine I/O requests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When converting mirror's I/O to coroutines, we are going to need a point
where these coroutines are created. mirror_perform() is going to be
that point.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So far we relied on job->ret and strerror() to produce an error message
for failed jobs. Not surprisingly, this tends to result in completely
useless messages.
This adds a Job.error field that can contain an error string for a
failing job, and a parameter to job_completed() that sets the field. As
a default, if NULL is passed, we continue to use strerror(job->ret).
All existing callers are changed to pass NULL. They can be improved in
separate patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.
This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The transition to the READY state was still performed in the BlockJob
layer, in the same function that sent the BLOCK_JOB_READY QMP event.
This patch brings the state transition to the Job layer and implements
the QMP event using a notifier called from the Job layer, like we
already do for other events related to state transitions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_drain() contains a blk_drain() call which cannot be moved to
Job, so add a new JobDriver callback JobDriver.drain which has a common
implementation for all BlockJobs. In addition to this we keep the
existing BlockJobDriver.drain callback that is called by the common
drain implementation for all block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_cancel_async() did two things that were still block job
specific:
* Setting job->force. This field makes sense on the Job level, so we can
just move it. While at it, rename it to job->force_cancel to make its
purpose more obvious.
* Resetting the I/O status. This can't be moved because generic Jobs
don't have an I/O status. What the function really implements is a
user resume, except without entering the coroutine. Consequently, it
makes sense to call the .user_resume driver callback here which
already resets the I/O status.
The old block_job_cancel_async() has two separate if statements that
check job->iostatus != BLOCK_DEVICE_IO_STATUS_OK and job->user_paused.
However, the former condition always implies the latter (as is
asserted in block_job_iostatus_reset()), so changing the explicit call
of block_job_iostatus_reset() on the former condition with the
.user_resume callback on the latter condition is equivalent and
doesn't need to access any BlockJob specific state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the finalisation of a single job from BlockJob to Job.
Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
There is nothing block layer specific about block_job_sleep_ns(), so
move the function to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move the defer_to_main_loop functionality from BlockJob to Job.
The code can be simplified because we can use job->aio_context in
job_defer_to_main_loop_bh() now, instead of having to access the
BlockDriverState.
Probably taking the data->aio_context lock in addition was already
unnecessary in the old code because we didn't actually make use of
anything protected by the old AioContext except getting the new
AioContext, in case it changed between scheduling the BH and running it.
But it's certainly unnecessary now that the BDS isn't accessed at all
any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We cannot yet move the whole logic around job cancelling to Job because
it depends on quite a few other things that are still only in BlockJob,
but we can move the cancelled field at least.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves reference counting from BlockJob to Job.
In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves the job_type field from BlockJobDriver to JobDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This is the first step towards creating an infrastructure for generic
background jobs that aren't tied to a block device. For now, Job only
stores its ID and JobDriver, the rest stays in BlockJob.
The following patches will move over more parts of BlockJob to Job if
they are meaningful outside the context of a block job.
BlockJob.driver is now redundant, but this patch leaves it around to
avoid unnecessary churn. The next patches will get rid of almost all of
its uses anyway so that it can be removed later with much less churn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Update the rest of the filter drivers to support
BDRV_REQ_WRITE_UNCHANGED. They already forward write request flags to
their children, so we just have to announce support for it.
This patch does not cover the replication driver because that currently
does not support flags at all, and because it just grabs the WRITE
permission for its children when it can, so we should be fine just
submitting the incoming WRITE_UNCHANGED requests as normal writes.
It also does not cover format drivers for similar reasons. They all use
bdrv_format_default_perms() as their .bdrv_child_perm() implementation
so they just always grab the WRITE permission for their file children
whenever possible. In addition, it often would be difficult to
ascertain whether incoming unchanging writes end up as unchanging writes
in their files. So we just leave them as normal potentially changing
writes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-7-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This gets us rid of more direct accesses to BlockJob fields from the
job drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
All block job drivers support .set_speed and all of them duplicate the
same code to implement it. Move that code to blockjob.c and remove the
now useless callback.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Every block job has a RateLimit, and they all do the exact same thing
with it, so it should be common infrastructure. Move the struct field
for a start.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Block job drivers are not expected to mess with the internals of the
BlockJob object, so provide wrapper functions for one of the cases where
they still do it: Updating the progress counter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit b76e4458b1 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.
Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY. Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
model all independent jobs as single job transactions.
It's one less case we have to worry about when we add more states to the
transition machine. This way, we can just treat all job lifetimes exactly
the same. This helps tighten assertions of the STM graph and removes some
conditionals that would have been needed in the coming commits adding a
more explicit job lifetime management API.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the generic helpers, and all passthrough clients
(blkdebug, commit, mirror, throttle) accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers are using QEMU_CLOCK_REALTIME, and it will not be possible to
support more than one clock when block_job_sleep_ns switches to a single
timer stored in the BlockJob struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Tested-By: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated. Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter. For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface. But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors. Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring). Fix a neighboring assertion to
use is_power_of_2 while there.
For ease of review, bdrv_get_block_status() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the process of converting sector-based interfaces to bytes,
I'm finding it easier to represent a byte count as a 64-bit
integer at the block layer (even if we are internally capped
by SIZE_MAX or even INT_MAX for individual transactions, it's
still nicer to not have to worry about truncation/overflow
issues on as many variables). Update the signature of
bdrv_round_to_clusters() to uniformly use int64_t, matching
the signature already chosen for bdrv_is_allocated and the
fact that off_t is also a signed type, then adjust clients
according to the required fallout (even where the result could
now exceed 32 bits, no client is directly assigning the result
into a 32-bit value without breaking things into a loop first).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not all callers care about which BDS owns the mapping for a given
range of the file. This patch merely simplifies the callers by
consolidating the logic in the common call point, while guaranteeing
a non-NULL file to all the driver callbacks, for no semantic change.
The only caller that does not care about pnum is bdrv_is_allocated,
as invoked by vvfat; we can likewise add assertions that the rest
of the stack does not have to worry about a NULL pnum.
Furthermore, this will also set the stage for a future cleanup: when
a caller does not care about which BDS owns an offset, it would be
nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALID in the first place. In the case of fragmented
allocation (for example, it's fairly easy to create a qcow2 image
where consecutive guest addresses are not at consecutive host
addresses), the current contract requires bdrv_get_block_status()
to clamp *pnum to the limit where host addresses are no longer
consecutive, but allowing a NULL file means that *pnum could be
set to the full length of known-allocated data.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Backing may be zero after failed bdrv_append in mirror_start_job,
which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170929152255.5431-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Backing may be zero after failed bdrv_attach_child in
bdrv_set_backing_hd, which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170928120300.58164-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we have adjusted the majority of the calls this function
makes to be byte-based, it is easier to read the code if it makes
passes over the image using bytes rather than sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, most callers were scaling a return value
of sectors into bytes (the exception, in qcow2-bitmap, will be
converted to byte-based iteration later). Update the interface to
do the scaling internally instead.
In qcow2-bitmap, the code was specifically checking for an error
return of -1. To avoid a regression, we either have to make sure
we continue to return -1 (rather than a scaled -512) on error, or
we have to fix the caller to treat all negative values as error
rather than just one magic value. It's easy enough to make both
changes at the same time, even though either one in isolation
would work.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers to bdrv_dirty_iter_new() passed 0 for their initial
starting point, drop that parameter.
Most callers to bdrv_set_dirty_iter() were scaling a byte offset to
a sector number; the exception qcow2-bitmap will be converted later
to use byte rather than sector iteration. Move the scaling to occur
internally to dirty bitmap code instead, so that callers now pass
in bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated(). But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.
For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of mirroring to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are both sector-aligned and multiples of the granularity). Drop
the now-unused mirror_clip_sectors().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function, preserving all existing semantics, and adding one more
assertion that things are still sector-aligned (so that conversions
to sectors in mirror_read_complete don't need to round).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change), and add mirror_clip_bytes() as a
counterpart to mirror_clip_sectors(). Some of the conversion is
a bit tricky, requiring temporaries to convert between units; it
will be cleared up in a following patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than having a void function that modifies its input
in-place as the output, change the signature to reduce a layer
of indirection and return the result.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting an
internal structure (no semantic change), and all references to the
buffer size.
Add an assertion that our use of s->granularity >> BDRV_SECTOR_BITS
(necessary for interaction with sector-based dirty bitmaps, until
a later patch converts those to be byte-based) does not suffer from
truncation problems.
[checkpatch has a false positive on use of MIN() in this patch]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upcoming patches are going to switch to byte-based interfaces
instead of sector-based. Even worse, trace_backup_do_cow_enter()
had a weird mix of cluster and sector indices.
The trace interface is low enough that there are no stability
guarantees, and therefore nothing wrong with changing our units,
even in cases like trace_backup_do_cow_skip() where we are not
changing the trace output. So make the tracing uniformly use
bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The user interface specifies job rate limits in bytes/second.
It's pointless to have our internal representation track things
in sectors/second, particularly since we want to move away from
sector-based interfaces.
Fix up a doc typo found while verifying that the ratelimit
code handles the scaling difference.
Repetition of expressions like 'n * BDRV_SECTOR_SIZE' will be
cleaned up later when functions are converted to iterate over
images by bytes rather than by sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The lone caller that cares about a return of BDRV_BLOCK_RAW
(namely, io.c:bdrv_co_get_block_status) completely replaces the
return value, so there is no point in passing BDRV_BLOCK_DATA.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
