Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It should be moved to the same context as source, before inserting to the
graph.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The assertion is currently failing. We can't require callers to have
write permissions when all they are doing is a read, so comment it out.
Add a FIXME comment in the code so that the check is re-enabled when
copy on read is refactored into its own filter driver.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
If @bs does not have any parents, the only reference to @mirror_top_bs
will be held by the BlockJob object after the bdrv_unref() following
block_job_create(). However, if block_job_create() fails, this reference
will not exist and @mirror_top_bs will have been deleted when we
goto fail.
The issue comes back at all later entries to the fail label: We delete
the BlockJob object before rolling back our changes to the node graph.
This means that we will delete @mirror_top_bs in the process.
All in all, whenever @bs does not have any parents and we go down the
fail path we will dereference @mirror_top_bs after it has been deleted.
Fix this by invoking bdrv_unref() only when block_job_create() was
successful and by bdrv_ref()'ing @mirror_top_bs in the fail path before
deleting the BlockJob object. Finally, bdrv_unref() it at the end of the
fail path after we actually no longer need it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like in the mirror filter driver, we also need to set the image size for
the commit filter driver. This is less likely to be a problem in
practice than for the mirror because we're not at the active layer here,
but attaching new parents to a node in the middle of the chain is
possible, so the size needs to be correct anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
The filter driver that is inserted by the commit job needs to use the
same AioContext as its parent and child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Change the types of variables in allocate_clusters() to int64_t so we do
not have to worry about potential overflows.
Add an assertion that our accesses to s->bat[] do not result in a buffer
overflow and that the implicit conversion performed when invoking
bat_entry_off() does not result in an integer overflow.
Coverity-id: 1307776
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170331170512.10381-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is a subtle difference between the fast (qcow2v3 with no
extra data) and slow path (qcow2v2 format [aka 0.10], or when a
snapshot is present) of qcow2_make_empty(). The slow path fails
to discard the final (partial) cluster of an unaligned image.
The problem stems from the fact that qcow2_discard_clusters() was
silently ignoring sub-cluster head and tail on unaligned requests.
A quick audit of all callers shows that qcow2_snapshot_create() has
always passed a cluster-aligned request since the call was added
in commit 1ebf561; qcow2_co_pdiscard() has passed a cluster-aligned
request since commit ecdbead taught the block layer about preferred
discard alignment; and qcow2_make_empty() was fixed to pass an
aligned start (but not necessarily end) in commit a3e1505.
Asserting that the start is always aligned also points out that we
now have a dead check: rounding the end offset down can never result
in a value less than the aligned start offset (the check was rendered
dead with commit ecdbead). Meanwhile, we do not want to round the
end cluster down in the one case of the end offset matching the
(unaligned) file size - that final partial cluster should still be
discarded.
With those fixes in place, the fast and slow paths are back in sync
at discarding an entire image; the next patch will update
qemu-iotests to ensure we don't regress.
Note that bdrv_co_pdiscard ignores ALL partial cluster requests,
including the partial cluster at the end of an image; it can be
argued that the partial cluster at the end should be special-cased
so that a guest issuing discard requests at proper alignments
everywhere else can likewise empty the entire image. But that
optimization is left for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-3-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit
d282f34 "sheepdog: Support blockdev-add" have different ideas on how
the QemuOpts parameters for the server address are named. Fix that.
While there, rename BlockdevOptionsSheepdog member addr to server, for
consistency with BlockdevOptionsSsh, BlockdevOptionsGluster,
BlockdevOptionsNbd.
Commit 831acdc's example becomes
--drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly
instead of
--drive driver=sheepdog,host=fido,vdi=dolly
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces, and convert all internal interfaces to
SocketAddressFlat.
BlockdevOptionsNbd is an external interface using SocketAddress. We
already use SocketAddressFlat elsewhere in blockdev-add. Replace it
by SocketAddressFlat while we can (it's new in 2.9) for simplicity and
consistency. For example,
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"data": { "host": "localhost",
"port": "12345" } } } }
becomes
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"host": "localhost", "port": "12345" } } }
Since the internal interfaces still take SocketAddress, this requires
conversion function socket_address_crumple(). It'll go away when I
update the interfaces.
Unfortunately, SocketAddress is also visible in -drive since 2.8:
-drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345
Nobody should be using it, as it's fairly new and has never been
documented, so adding still more compatibility gunk to keep it working
isn't worth the trouble. You now have to use
-drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com
[mreitz: Change iotest 147 accordingly]
Because of this interface change, iotest 147 has to be adapted.
Unfortunately, we cannot just flatten all of the addresses because
nbd-server-start still takes a plain SocketAddress. Therefore, we need
both and this is most easily achieved by writing the SocketAddress into
the code and flattening it where necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170330221243.17333-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu_gluster_glfs_init() and qemu_gluster_parse_json() rely on the
fact that SocketAddressFlatType has only two members
SOCKET_ADDRESS_FLAT_TYPE_INET and SOCKET_ADDRESS_FLAT_TYPE_UNIX.
Correct, but won't stay correct. Make them more robust.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490895797-29094-6-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When TCP connection fails between nbd server and client,
the local var, sioc, memory leak.
This patch fixes the memory leak.
Signed-off-by: yaolujing <yaolujing@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1491005709-29989-1-git-send-email-yaolujing@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IscsiAIOCB.qiov field has been unused since commit
063c3378a9 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}") back in 2013.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170327165005.22038-1-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user has explicitly specified a block driver and thus a protocol,
we have to make sure the URL's protocol prefix matches. Otherwise the
latter will silently override the former which might catch some users by
surprise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331120431.1767-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit c7cacb3 accidentally broke legacy key-value parsing through
pseudo-filename parsing of -drive file=rbd://..., for any key that
contains an escaped ':'. Such a key is surprisingly common, thanks
to mon_host specifying a 'host:port' string. The break happens
because passing things from QDict through QemuOpts back to another
QDict requires that we pack our parsed key/value pairs into a string,
and then reparse that string, but the intermediate string that we
created ("key1=value1:key2=value2") lost the \: escaping that was
present in the original, so that we could no longer see which : were
used as separators vs. those used as part of the original input.
Fix it by collecting the key/value pairs through a QList, and
sending that list on a round trip through a JSON QString (as in
'["key1","value1","key2","value2"]') on its way through QemuOpts,
rather than hand-rolling our own string. Since the string is only
handled internally, this was faster than creating a full-blown
struct of '[{"key1":"value1"},{"key2":"value2"}]', and safer at
guaranteeing order compared to '{"key1":"value1","key2":"value2"}'.
It would be nicer if we didn't have to round-trip through QemuOpts
in the first place, but that's a much bigger task for later.
Reproducer:
./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
-drive 'file=rbd:volumes/volume-ea141b5c-cdb3-4765-910d-e7008b209a70'\
':id=compute:key=AQAVkvxXAAAAABAA9ZxWFYdRmV+DSwKr7BKKXg=='\
':auth_supported=cephx\;none:mon_host=192.168.1.2\:6789'\
',format=raw,if=none,id=drive-virtio-disk0,'\
'serial=ea141b5c-cdb3-4765-910d-e7008b209a70,cache=writeback'
Even without an RBD setup, this serves a test of whether we get
the incorrect parser error of:
qemu-system-x86_64: -drive file=rbd:...cache=writeback: conf option 6789 has no value
or the correct behavior of hanging while trying to connect to
the requested mon_host of 192.168.1.2:6789.
Reported-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170331152730.12514-1-eblake@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
qemu_rbd_open() takes option parameters as a flattened QDict, with
keys of the form server.%d.host, server.%d.port, where %d counts up
from zero.
qemu_rbd_array_opts() extracts these values as follows. First, it
calls qdict_array_entries() to find the list's length. For each list
element, it formats the list's key prefix (e.g. "server.0."), then
creates a new QDict holding the options with that key prefix, then
converts that to a QemuOpts, so it can finally get the member values
from there.
If there's one surefire way to make code using QDict more awkward,
it's creating more of them and mixing in QemuOpts for good measure.
The extraction of keys starting with server.%d into another QDict
makes us ignore parameters like server.0.neither-host-nor-port
silently.
The conversion to QemuOpts abuses runtime_opts, as described a few
commits ago.
Rewrite to simply get the values straight from the options QDict.
Fixes -drive not to crash when server.*.* are present, but
server.*.host is absent.
Fixes -drive to reject invalid server.*.*.
Permits cleaning up runtime_opts. Do that, and fix -drive to reject
bogus parameters host and port instead of silently ignoring them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-11-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This reverts half of commit 0a55679. We're having second thoughts on
the QAPI schema (and thus the external interface), and haven't reached
consensus, yet. Issues include:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure authentication methods with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Further note that this doesn't affect use of key "auth-supported" in
-drive file=rbd:...:key=value.
qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST,
which is silly. This will be cleaned up shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The conversion from QDict to QemuOpts is pointless. Simply get the
stuff straight from the QDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-8-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
runtime_opts is used for three different purposes:
* qemu_rbd_open() uses it to accept options it recognizes, such as
"pool" and "image". Other .bdrv_open() methods do it similarly.
* qemu_rbd_open() accepts additional list-valued options
auth-supported and server, with the help of qemu_rbd_array_opts().
The list elements are again dictionaries. qemu_rbd_array_opts()
uses runtime_opts to accept their members. Thus, runtime_opts
contains recognized sub-sub-options "auth", "host", "port" in
addition to recognized options. No other block driver does that.
* qemu_rbd_create() uses it to convert the QDict produced by
qemu_rbd_parse_filename() to QemuOpts. No other block driver does
that. The keys produced by qemu_rbd_parse_filename() are "pool",
"image", "snapshot", "conf", "user" and "keyvalue-pairs".
qemu_rbd_open() accepts these, so no additional ones here.
This is a confusing mess. Dates back to commit 0f9d252. First step
to clean it up is documenting runtime_opts.desc[]:
* Reorder entries to match the QAPI schema, like we do in other block
drivers.
* Document why the schema's "server" and "auth-supported" aren't in
.desc[].
* Document why "keyvalue-pairs", "host", "port" and "auth" are in
.desc[], but not the schema.
* Delete "filename", because none of the three users actually uses it.
This fixes -drive to reject parameter filename instead of silently
ignoring it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-7-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The way we communicate extra key-value pairs from
qemu_rbd_parse_filename() to qemu_rbd_open() exposes option parameter
"keyvalue-pairs" on the command line. It's not wanted there. Hack:
rename the parameter to "=keyvalue-pairs" to make it inaccessible.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-6-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This code in qemu_rbd_parse_filename()
found_str = qemu_rbd_next_tok(p, '\0', &p);
p = found_str;
has no effect. Drop it, and simplify qemu_rbd_next_tok().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-5-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We laboriously enforce that parameter values are between one and some
arbitrary limit in length. Only RBD_MAX_IMAGE_NAME_SIZE comes from
librbd.h, and I'm not sure it applies. Where the other limits come
from is unclear.
Drop the length checking. The limits librbd actually imposes must be
checked by librbd anyway.
There's one minor complication: BDRVRBDState member name is a
fixed-size array. Depends on the length limit. Make it a pointer to
a dynamically allocated string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-4-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
qemu_rbd_open() neglects to check pool and image are present. Missing
image is caught by rbd_open(), but missing pool crashes. Reproducer:
$ qemu-system-x86_64 -nodefaults -drive driver=rbd,id=rbd,image=i,...
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Aborted (core dumped)
where ... is a working server.0.{host,port} configuration.
Doesn't affect -drive with file=..., because qemu_rbd_parse_filename()
always sets both pool and image.
Doesn't affect -blockdev, because pool and image are mandatory in the
QAPI schema.
Fix by adding the missing checks.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-3-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Parallels driver should not call bdrv_truncate if the image was opened
in the read-only mode. Without the patch
qemu-img check harddisk.hds
asserts with
bdrv_truncate: Assertion `child->perm & BLK_PERM_RESIZE' failed.
Parameters used on the write path are not needed if the image is opened
in the read-only mode.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Edgar Kaziahmedov <edos@virtuozzo.mipt.ru>
Message-id: 1490625488-7980-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On OpenBSD none of the ioctls probe_logical_blocksize() tries
exist, so the variable sector_size is unused. Refactor the
code to avoid this (and reduce the duplicated code).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490279788-12995-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Success for bdrv_flush() means that all previously written data is safe
on disk. For fdatasync(), the best semantics we can hope for on Linux
(without O_DIRECT) is that all data that was written since the last call
was successfully written back. Therefore, and because we can't redo all
writes after a flush failure, we have to give up after a single
fdatasync() failure. After this failure, we would never be able to make
the promise that a successful bdrv_flush() makes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170322210005.16533-1-kwolf@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
After the switch to reading replies in a coroutine, nothing is
reentering pending receive coroutines if the connection hangs.
Move nbd_recv_coroutines_enter_all to the reply read coroutine,
which is the place where hangups are detected. nbd_teardown_connection
can simply wait for the reply read coroutine to detect the hangup
and clean up after itself.
This wouldn't be enough though because nbd_receive_reply returns 0
(rather than -EPIPE or similar) when reading from a hung connection.
Fix the return value check in nbd_read_reply_entry.
This fixes qemu-iotests 083.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170314111157.14464-1-pbonzini@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170327123223.1199-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
block/trace-events lists the parameters for mirror_yield
consistently with other mirror events (cnt just after s, like in
mirror_before_sleep; in_flight last, like in mirror_yield_in_flight).
But the callers were passing parameters in the wrong order, leading
to poor trace messages, including type truncation when there are
more than 4G dirty sectors involved. Broken since its introduction
in commit bd48bde.
While touching this, ensure that all callers use the same type
(uint64_t) for cnt, as a later patch will enable the compiler to do
stricter type-checking.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow block backends to forward drain requests to their devices/users.
The initial intended purpose for this patch is to allow BBs to forward
requests along to BlockJobs, which will want to pause if their associated
BB has entered a drained region.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170316212351.13797-3-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
parallels block driver is completely broken since commit
commit 75cdcd1553
Author: Markus Armbruster <armbru@redhat.com>
Date: Tue Feb 21 21:14:08 2017 +0100
option: Fix checking of sizes for overflow and trailing crap
Right now even simple
qemu-io -c "read 512 64k" 1.hds
ends up with
Unexpected error in parse_option_size() at util/qemu-option.c:188:
Parameter 'prealloc-size' expects a non-negative number below 2^64
Aborted (core dumped)
The cure is simple - we should use 'M' as a suffix in default option value
instead of 'MiB'.
Signed-off-by: Edgar Kaziahmedov <edos@virtuozzo.mipt.ru>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1490002022-22653-1-git-send-email-den@openvz.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
EPROTO is not found in OpenBSD. We usually use EIO when no better
errno is available, do that here too.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170317152412.8472-1-pbonzini@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a leaked fd introduced in commit 9103f1ce.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even if hidden_disk, secondary_disk are backing files, they all need
write permissions in replication scenario. Otherwise we will encouter
below exceptions on secondary side during adding nbd server:
{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk', 'writable': true } }
{"error": {"class": "GenericError", "desc": "Conflicts with use by hidden-qcow2-driver as 'backing', which does not allow 'write' on sec-qcow2-driver-for-nbd"}}
CC: Zhang Hailiang <zhang.zhanghailiang@huawei.com>
CC: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
CC: Wen Congyang <wencongyang2@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following pattern is unsafe:
char buf[32];
ret = read(fd, buf, sizeof(buf));
...
buf[ret] = 0;
If read(2) returns 32 then a byte beyond the end of the buffer is
zeroed.
In practice this buffer overflow does not occur because the sysfs
max_segments file only contains an unsigned short + '\n'. The string is
always shorter than 32 bytes.
Regardless, avoid this pattern because static analysis tools might
complain and it could lead to real buffer overflows if copy-pasted
elsewhere in the codebase.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want query-block to return the right filename, even if a commit job
put a bdrv_commit_top on top of the actual image format driver. Let
bdrv_commit_top.bdrv_refresh_filename get the filename from its backing
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want query-block to return the right filename, even if a mirror job
put a bdrv_mirror_top on top of the actual image format driver. Let
bdrv_mirror_top.bdrv_refresh_filename get the filename from its backing
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases, bdrv_co_get_block_status() is called recursively for the
whole backing chain. The automatically inserted bdrv_commit_top filter
driver must not stop the recursion, so implement a callback that simply
forwards the request to bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This fixes bdrv_co_get_block_status() for the bdrv_mirror_top block
driver, which must fall through to bs->backing instead of bs->file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If bdrv_is_allocated() fails, we should react to that failure.
For 2 of the 3 callers, reporting the error was easy. But in
cluster_was_modified() and its lone caller
get_cluster_count_for_direntry(), it's rather invasive to update
the logic to pass the error back; so there, I went with merely
documenting the issue by changing the return type to bool (in
all likelihood, treating the cluster as modified will then
trigger a read which will also fail, and eventually get to an
error - but given the appalling number of abort() calls in this
code, I'm not making it any worse).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_is_allocated() fails, we should immediately do the backup
error action, rather than attempting backup_do_cow() (although
that will likely fail too).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockLimits.max_transfer can be too high without this fix, guest will
encounter I/O error or even get paused with werror=stop or rerror=stop. The
cause is explained below.
Linux has a separate limit, /sys/block/.../queue/max_segments, which in
the worst case can be more restrictive than the BLKSECTGET which we
already consider (note that they are two different things). So, the
failure scenario before this patch is:
1) host device has max_sectors_kb = 4096 and max_segments = 64;
2) guest learns max_sectors_kb limit from QEMU, but doesn't know
max_segments;
3) guest issues e.g. a 512KB request thinking it's okay, but actually
it's not, because it will be passed through to host device as an
SG_IO req that has niov > 64;
4) host kernel doesn't like the segmenting of the request, and returns
-EINVAL;
This patch checks the max_segments sysfs entry for the host device and
calculates a "conservative" bytes limit using the page size, which is
then merged into the existing max_transfer limit. Guest will discover
this from the usual virtual block device interfaces. (In the case of
scsi-generic, it will be done in the INQUIRY reply interception in
device model.)
The other possibility is to actually propagate it as a separate limit,
but it's not better. On the one hand, there is a big complication: the
limit is per-LUN in QEMU PoV (because we can attach LUNs from different
host HBAs to the same virtio-scsi bus), but the channel to communicate
it in a per-LUN manner is missing down the stack; on the other hand,
two limits versus one doesn't change much about the valid size of I/O
(because guest has no control over host segmenting).
Also, the idea to fall back to bounce buffering in QEMU, upon -EINVAL,
was explored. Unfortunately there is no neat way to ensure the bounce
buffer is less segmented (in terms of DMA addr) than the guest buffer.
Practically, this bug is not very common. It is only reported on a
Emulex (lpfc), so it's okay to get it fixed in the easier way.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently backup to nbd target is broken, as nbd doesn't have
.bdrv_get_info realization.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_backing_hd failure needn't be abort. Since we already have
error parameter, use it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have an errp and bdrv_root_attach_child can fail permission check,
error_abort is not the best choice here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To reproduce, run
$ valgrind qemu-system-x86_64 --nodefaults -S --drive driver=gluster,volume=testvol,path=/a/b/c,server.0.type=xxx
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_gluster_glfs_init() passes the names of QAPI enumeration type
SocketTransport to glfs_set_volfile_server(). Works, because they
were chosen to match. But the coupling is artificial. Use the
appropriate literal strings instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This permits configuration with driver-specific options in addition to
pseudo-filename parsed as URI. For instance,
--drive driver=sheepdog,host=fido,vdi=dolly
instead of
--drive driver=sheepdog,file=sheepdog://fido/dolly
It's also a first step towards supporting blockdev-add.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() builds a string from host and port parts for
inet_connect(). inet_connect() parses it into host, port and options.
Whether this gets exactly the same host, port and no options for all
inputs is not obvious.
Cut out the string middleman and build a SocketAddress for
socket_connect() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors in the pseudo-filename are all reported with the same laconic
"Can't parse filename" message.
Add real error reporting, such as:
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog:///
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog:///: missing file path in URI
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepgod:///vdi
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepgod:///vdi: URI scheme must be 'sheepdog', 'sheepdog+tcp', or 'sheepdog+unix'
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock: unexpected query parameters
The code to translate legacy syntax to URI fails to escape URI
meta-characters. The new error messages are misleading then. Replace
them by the old "Can't parse filename" message. "Internal error"
would be more honest. Anyway, no worse than before. Also add a FIXME
comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() truncates long VDI names silently. Reject them
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() and sd_snapshot_goto() screw up error checking after
strtoul(), and truncate long tag names silently. Fix by replacing
those parts by new sd_parse_snapid_or_tag(), which checks more
carefully.
sd_snapshot_delete() also parses snapshot IDs, but is currently too
broken for me to touch. Mark TODO.
Two calls of strtol() without error checking remain in
parse_redundancy(). Mark them FIXME.
More silent truncation of configuration strings remains elsewhere.
Not marked.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_snapshot_delete() should delete the snapshot whose ID matches
@snapshot_id and whose name matches @name. But that's not what it
does. If @snapshot_id is a valid ID, it deletes the snapshot with
that ID, else it deletes the snapshot with that name. It doesn't use
@name at all. Add suitable FIXME comments, so someone who actually
knows Sheepdog can fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a bdrv_create() method, sd_create() must set an error and return
negative errno on failure. It prints the error instead of setting it
when connect_to_sdog() fails. Fix that.
While there, return the value of connect_to_sdog() like we do
elsewhere, instead of -EIO. No functional change, as
connect_to_sdog() returns no other error code.
Many more suspicious uses of error_report() and error_report_err()
remain in other functions. Left for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a bdrv_snapshot_delete() method, sd_snapshot_delete() must set an
error and return negative errno on failure. It sometimes returns -1,
and sometimes neglects to set an error. It also prints error messages
with error_report(). Fix all that.
Moreover, its handling of an attempt to delete a nonexistent snapshot
is wrong: it error_report()s and succeeds. Fix it to set an error and
return -ENOENT instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_opts_absorb_qdict() fails, sd_open() closes stdin, because
sd->fd is still zero. Fortunately, qemu_opts_absorb_qdict() can't
fail, because:
1. it only fails when qemu_opt_parse() fails, and
2. the only member of runtime_opts.desc[] is a QEMU_OPT_STRING, and
3. qemu_opt_parse() can't fail for QEMU_OPT_STRING.
Defuse this ticking time bomb by jumping behind the file descriptor
cleanup on error.
Also do that for the error paths where sd->fd is still -1. The file
descriptor cleanup happens to do nothing then, but let's not rely on
that here.
While there, rename label out to err, because it's on the error path,
not the normal path out of the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top_bs must be removed from the graph again when creating the
dirty bitmap fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top_bs takes write permissions on its backing file, which can
make it impossible to attach that backing file node to another parent.
However, this is exactly what needs to be done in order to remove
mirror_top_bs from the backing chain. So give up the write permission
first.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'replaces' option of drive-mirror can be used to mirror a Quorum
node to a new image and then let the target image replace one of the
Quorum children. In order for this graph modification to succeed, the
mirror job needs to lift its restrictions on the target node first
before actually replacing the child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Apparently some kind of mismerge happened in commit 8dfba279, which
broke the error handling without any real reason by removing the
assignment of the return value to ret in a blk_insert_bs() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
This adds support for three additional options that may be specified
by QAPI in blockdev-add:
server: host, port
auth method: either 'cephx' or 'none'
The "server" and "auth-supported" QAPI parameters are arrays. To conform
with the rados API, the array items are join as a single string with a ';'
character as a delimiter when setting the configuration values.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Aborting on error in bdrv_append() isn't correct. This patch fixes it
and lets the callers handle failures.
Test case 085 needs a reference output update. This is caused by the
reversed order of bdrv_set_backing_hd() and change_parent_backing_link()
in bdrv_append(): When the backing file of the new node is set, the
parent nodes are still pointing to the old top, so the backing blocker
is now initialised with the node name rather than the BlockBackend name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Not all callers of bdrv_set_backing_hd() know for sure that attaching
the backing file will be allowed by the permission system. Return the
error from the function rather than aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds an assertion that ensures that the necessary resize permission
has been granted before bdrv_truncate() is called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This adds assertions that ensure that the necessary write permissions
have been granted before someone attempts to write to a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is where we want to check the permissions, so we need to have the
BdrvChild around where they are stored.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The HMP command 'qemu-io' is a bit tricky because it wants to work on
the original BlockBackend, but additional permissions could be required.
The details are explained in a comment in the code, but in summary, just
request whatever permissions the current qemu-io command needs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-mirror allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The correct permissions are relatively obvious here (and explained in
code comments). For intermediate streaming, we need to reopen the top
node read-write before creating the job now because the permissions
system catches attempts to get the BLK_PERM_WRITE_UNCHANGED permission
on a read-only node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The mirror block job is mainly used for two different scenarios:
Mirroring to an otherwise unused, independent target node, or for active
commit where the target node is part of the backing chain of the source.
Similarly to the commit block job patch, we need to insert a new filter
node to keep the permissions correct during active commit.
Note that one change this implies is that job->blk points to
mirror_top_bs as its root now, and mirror_top_bs (rather than the actual
source node) contains the bs->job pointer. This requires qemu-img commit
to get the job by name now rather than just taking bs->job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
The backup block job doesn't have very complicated requirements: It
needs to read from the source and write to the target, but it's fine
with either side being changed. The only restriction is that we can't
resize the image because the job uses a cached value.
qemu-iotests 055 needs to be changed because it used a target which was
already attached to a virtio-blk device. The permission system correctly
forbids this (virtio-blk can't accept another writer with its default
share-rw=off).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This is a little simpler than the commit block job because it's
synchronous and only commits into the immediate backing file, but
otherwise doing more or less the same.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This is probably one of the most interesting conversions to the new
op blocker system because a commit block job intentionally leaves some
intermediate block nodes in the backing chain that aren't valid on their
own any more; only the whole chain together results in a valid view.
In order to provide the 'consistent read' permission to the parents of
the 'top' node of the commit job, a new filter block driver is inserted
above 'top' which doesn't require 'consistent read' on its backing
chain. Subsequently, the commit job can block 'consistent read' on all
intermediate nodes without causing a conflict.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block jobs don't actually do I/O through the the reference they create
with block_job_add_bdrv(), but they might want to use the permisssion
system to express what the block job does to intermediate nodes. This
adds permissions to block_job_add_bdrv() to provide the means to request
permissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This functions creates a BlockBackend internally, so the block jobs need
to tell it what they want to do with the BB.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We can figure out the necessary permissions from the flags that the
caller passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
blk_new_open() is a convenience function that processes flags rather
than QDict options as a simple way to just open an image file.
In order to keep it convenient in the future, it must automatically
request the necessary permissions. This can easily be inferred from the
flags for read and write, but we need another flag that tells us whether
to get the resize permission.
We can't just always request it because that means that no block jobs
can run on the resulting BlockBackend (which is something that e.g.
qemu-img commit wants to do), but we also can't request it never because
most of the .bdrv_create() implementations call blk_truncate().
The solution is to introduce another flag that is passed by all users
that want to resize the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The BlockBackend can now store the permissions that its user requires.
This is necessary because nodes can be ejected from or inserted into a
BlockBackend and all of these operations must make sure that the user
still gets what it requested initially.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This makes use of the .bdrv_child_perm() implementation for formats that
we just added. All format drivers expose the permissions they actually
need nows, so that they can be set accordingly and updated when parents
are attached or detached.
The only format not included here is raw, which was already converted
with the other filter drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
All callers will have to request permissions for all of their child
nodes. Block drivers that act as simply filters can use the default
implementation of .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
When attaching a node as a child to a new parent, the required and
shared permissions for this parent are checked against all other parents
of the node now, and an error is returned if there is a conflict.
This allows error returns to a function that previously always
succeeded, and the same is true for quite a few callers and their
callers. Converting all of them within the same patch would be too much,
so for now everyone tells that they don't need any permissions and allow
everyone else to do anything. This way we can use &error_abort initially
and convert caller by caller to pass actual permission requirements and
implement error handling.
All these places are marked with FIXME comments and it will be the job
of the next patches to clean them up again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
It will have to return an error soon, so prepare the callers for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Get rid of qemu_rbd_parsename in favor of bdrv_parse_filename.
This simplifies a lot of the parsing as well, as we can treat everything
a bit simpler since nonexistent options are simply NULL pointers instead
of empty strings.
An important item to note:
Ceph has many extra option values that can be specified as key/value
pairs. This was handled previously in the driver by extracting the
values that the QEMU driver cared about, and then blindly passing all
extra options to rbd after splitting them into key/value pairs, and
cleaning up any special character escaping.
The practice is continued in this patch; there is an option
"keyvalue-pairs" that is populated with all the key/value pairs that the
QEMU driver does not care about. These key/value pairs will override
any settings in the 'conf' configuration file, just as they did before.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This adds all the currently supported runtime opts, which
are the options as parsed from the filename. All of these
options are explicitly checked for during during runtime,
with an exception to the "keyvalue-pairs" option.
This option contains all the key/value pairs that the QEMU rbd
driver merely unescapes, and passes along blindly to rados. This
option is a "legacy" option, and will not be exposed in the QAPI
or available for introspection.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This patch is prep work for parsing options for .bdrv_parse_filename,
and using QDict options.
The function qemu_rbd_next_tok() searched for various key/value pairs,
and copied them into buffers. This will soon be an unnecessary extra
step, so we will now return found strings by reference only, and
offload the responsibility for safely handling/coping these strings to
the caller.
This also cleans up error handling some, as the callers now rely on
the Error object to determine if there is a parse error.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
int64_t is in all likelihood the actual scalar type we want.
Yep, really.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1219541
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect libiscsi calls with a QemuMutex. Callbacks are invoked
using bottom halves, so we don't even have to drop it around
callback invocations.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-4-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect libnfs calls with a QemuMutex. Callbacks are invoked
using bottom halves, so we don't even have to drop it around
callback invocations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-3-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect BDRVCURLState access with a QemuMutex.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYgF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 24 Feb 2017 18:08:26 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
tests: Use opened block node for block job tests
vvfat: Use opened node as backing file
block: Add bdrv_new_open_driver()
block: Factor out bdrv_open_driver()
block: Use BlockBackend for image probing
block: Factor out bdrv_open_child_bs()
block: Attach bs->file only during .bdrv_open()
block: Pass BdrvChild to bdrv_truncate()
mirror: Resize active commit base in mirror_run()
qcow2: Use BB for resizing in qcow2_amend_options()
blockdev: Use BlockBackend to resize in qmp_block_resize()
iotests: Fix another race in 030
qemu-img: Improve documentation for PREALLOC_MODE_FALLOC
qemu-img: Truncate before full preallocation
qemu-img: Add tests for raw image preallocation
qemu-img: Do not truncate before preallocation
qemu-iotests: redirect nbd server stdout to /dev/null
qemu-iotests: add ability to exclude certain protocols from tests
qemu-iotests: Test 137 only supports 'file' protocol
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rbd can do readv and writev directly, so wo do not need to transform
iov to buf or vice versa any more.
Signed-off-by: tianqing <tianqing@unitedstack.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
if the passed qiov contains exactly one iov we can
pass the buffer directly.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1487349541-10201-3-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1487349541-10201-2-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
We should not try to assign a not yet opened node as the backing file,
because as soon as the permission system is added it will fail. The
just added bdrv_new_open_driver() function is the right tool to open a
file with an internal driver, use it.
In case anyone wonders whether that magic fake backing file to trigger a
special action on 'commit' actually works today: No, not for me. One
reason is that we've been adding a raw format driver on top for several
years now and raw doesn't support commit. Other reasons include that the
backing file isn't writable and the driver doesn't support reopen, and
it's also size 0 and the driver doesn't support bdrv_truncate. All of
these are easily fixable, but then 'commit' ended up in an infinite loop
deep in the vvfat code for me, so I thought I'd best leave it alone. I'm
not really sure what it was supposed to do anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is more consistent with the commit block job, and it moves the code
to a place where we already have the necessary BlockBackends to resize
the base image when bdrv_truncate() is changed to require a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to able to convert bdrv_truncate() to take a BdrvChild and
later to correctly check the resize permission here, we need to use a
BlockBackend for resizing the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that we are truncating the file in both PREALLOC_MODE_FULL and
PREALLOC_MODE_OFF, not truncating in PREALLOC_MODE_FALLOC looks odd.
Add a comment explaining why we do not truncate in this case.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In a previous commit (qemu-img: Do not truncate before preallocation) we
moved truncate to the PREALLOC_MODE_OFF branch to avoid slowdown in
posix_fallocate().
However this change is not optimal when using PREALLOC_MODE_FULL, since
knowing the final size from the beginning could allow the file system
driver to do less allocations and possibly avoid fragmentation of the
file.
Now we truncate also before doing full preallocation.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using file system that does not support fallocate() (e.g. NFS <
4.2), truncating the file only when preallocation=OFF speeds up creating
raw file.
Here is example run, tested on Fedora 24 machine, creating raw file on
NFS version 3 server.
$ time ./qemu-img-master create -f raw -o preallocation=falloc mnt/test 1g
Formatting 'mnt/test', fmt=raw size=1073741824 preallocation=falloc
real 0m21.185s
user 0m0.022s
sys 0m0.574s
$ time ./qemu-img-fix create -f raw -o preallocation=falloc mnt/test 1g
Formatting 'mnt/test', fmt=raw size=1073741824 preallocation=falloc
real 0m11.601s
user 0m0.016s
sys 0m0.525s
$ time dd if=/dev/zero of=mnt/test bs=1M count=1024 oflag=direct
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 15.6627 s, 68.6 MB/s
real 0m16.104s
user 0m0.009s
sys 0m0.220s
Running with strace we can see that without this change we do one
pread() and one pwrite() for each block. With this change, we do only
one pwrite() per block.
$ strace ./qemu-img-master create -f raw -o preallocation=falloc mnt/test 8192
...
pread64(9, "\0", 1, 4095) = 1
pwrite64(9, "\0", 1, 4095) = 1
pread64(9, "\0", 1, 8191) = 1
pwrite64(9, "\0", 1, 8191) = 1
$ strace ./qemu-img-fix create -f raw -o preallocation=falloc mnt/test 8192
...
pwrite64(9, "\0", 1, 4095) = 1
pwrite64(9, "\0", 1, 8191) = 1
This happens because posix_fallocate is checking if each block is
allocated before writing a byte to the block, and when truncating the
file before preallocation, all blocks are unallocated.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After a visit of a complex QAPI type FOO
ov = qobject_output_visitor_new(&foo);
visit_type_FOO(ov, NULL, expr, &error_abort);
visit_complete(ov, &foo);
we can safely assume qobject_type(foo) is QTYPE_QDICT. We do in many
places, but occasionally assert qobject_type(obj) == QTYPE_QDICT.
Don't. The appropriate place to check such fundamental properties of
QAPI visitors is the test suite.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487363905-9480-15-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If explicit zeroing out before mirroring is required for the target image,
it moves the block job offset counter to EOF, then offset and len counters
count the image size twice. There is no harm but stats are confusing,
specifically the progress of the operation is always reported as 99% by
management tools.
The patch skips offset increase for the first "technical" pass over the
image. This should not cause any further harm.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1486045515-8009-1-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This adds blockdev-add support for iscsi devices.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
All -iscsi options have a corresponding driver-specific option for the
iscsi block driver now.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This was previously only available with -iscsi. Again, after this patch,
the -iscsi option only takes effect if an URL is given. New users are
supposed to use the new driver-specific option.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This splits the logic in the old parse_chap() function into a part that
parses the -iscsi options into the new driver-specific options, and
another part that actually applies those options (called apply_chap()
now).
Note that this means that username and password specified with -iscsi
only take effect when a URL is provided. This is intentional, -iscsi is
a legacy interface only supported for compatibility, new users should
use the proper driver-specific options.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This introduces a .bdrv_parse_filename handler for iscsi which parses an
URL if given and translates it to individual options.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
All that CoQueue needs in order to become thread-safe is help
from an external mutex. Add this to the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-16-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-13-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qed_aio_start_io and qed_aio_next_io will not have to acquire/release
the AioContext, while qed_aio_next_io_cb will. Split the functionality
and gain a little type-safety in the process.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-11-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Keep the coroutine on the same AioContext. Without this change,
there would be a race between yielding the coroutine and reentering it.
While the race cannot happen now, because the code only runs from a single
AioContext, this will change with multiqueue support in the block layer.
While doing the change, replace custom bottom half with aio_co_schedule.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-10-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the client, read the reply headers from a coroutine, switching the
read side between the "read header" coroutine and the I/O coroutine that
reads the body of the reply.
In the server, if the server can read more requests it will create a new
"read request" coroutine as soon as a request has been read. Otherwise,
the new coroutine is created in nbd_request_put.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-8-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2_create2 calls this. Do not run a nested event loop, as that
breaks when aio_co_wake tries to queue the coroutine on the co_queue_wakeup
list of the currently running one.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-4-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
AioContext is fairly self contained, the only dependency is QEMUTimer but
that in turn doesn't need anything else. So move them out of block-obj-y
to avoid introducing a dependency from io/ to block-obj-y.
main-loop and its dependency iohandler also need to be moved, because
later in this series io/ will call iohandler_get_aio_context.
[Changed copyright "the QEMU team" to "other QEMU contributors" as
suggested by Daniel Berrange and agreed by Paolo.
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The metadata overlap checks introduced in a40f1c2add help detect
corruption in the qcow2 image by verifying that data writes don't
overlap with existing metadata sections.
The 'refcount-block' check in particular iterates over the refcount
table in order to get the addresses of all refcount blocks and check
that none of them overlap with the region where we want to write.
The problem with the refcount table is that since it always occupies
complete clusters its size is usually very big. With the default
values of cluster_size=64KB and refcount_bits=16 this table holds 8192
entries, each one of them enough to map 2GB worth of host clusters.
So unless we're using images with several TB of allocated data this
table is going to be mostly empty, and iterating over it is a waste of
CPU. If the storage backend is fast enough this can have an effect on
I/O performance.
This patch keeps the index of the last used (i.e. non-zero) entry in
the refcount table and updates it every time the table changes. The
refcount-block overlap check then uses that index instead of reading
the whole table.
In my tests with a 4GB qcow2 file stored in RAM this doubles the
amount of write IOPS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170201123828.4815-1-berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
commit 94d6a7a accidentally left the naming of runtime opts and QAPI
scheme inconsistent. As one consequence passing of parameters in the
URI is broken. Sync the naming of the runtime opts to the QAPI
scheme.
Please note that this is technically backwards incompatible with the 2.8
release, but the 2.8 release is the only version that had the wrong naming.
Furthermore release 2.8 suffered from a NULL pointer dereference during
URI parsing.
Fixes: 94d6a7a76e
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1485942829-10756-3-git-send-email-pl@kamp.de
[mreitz: Fixed commit message]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
parse_uint_full wants to put the parsed value into the
variable passed via its second argument which is NULL.
Fixes: 94d6a7a76e
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1485942829-10756-2-git-send-email-pl@kamp.de
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to reduce the execution time, this patch optimize
the qmp_query_blockstats():
Remove the next_query_bds function.
Remove the bdrv_query_stats function.
Remove some judgement sentence.
The original qmp_query_blockstats calls next_query_bds to get
the next objects in each loops. In the next_query_bds, it checks
the query_nodes and blk. It also call bdrv_query_stats to get
the stats, In the bdrv_query_stats, it checks blk and bs each
times. This waste more times, which may stall the main loop a
bit. And if the disk is too many and donot use the dataplane
feature, this may affect the performance in main loop thread.
This patch removes that two functions, and makes the structure
clearly.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-id: 1484467275-27919-3-git-send-email-douly.fnst@cn.fujitsu.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[mreitz: Removed duplicate info->value assignment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The bdrv_query_stats and bdrv_query_bds_stats functions need to call
each other, that increases the coupling. it also makes the program
complicated and makes some unnecessary tests.
Remove the call from bdrv_query_bds_stats to bdrv_query_stats, just
take some recursion to make it clearly.
Avoid testing whether the blk is NULL during querying the bds stats.
It is unnecessary.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-id: 1484467275-27919-2-git-send-email-douly.fnst@cn.fujitsu.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The problem was triggered by qemu-iotests case 055. It failed when it
was comparing the compressed vmdk image with original test.img.
The cause is that buf_len in vmdk_write_extent wasn't converted to
little-endian before it was stored to disk. But later vmdk_read_extent
read it and converted it from little-endian to cpu endian.
If the cpu is big-endian like s390, the problem will happen and
the data length read by vmdk_read_extent will become invalid!
The fix is to add the conversion in vmdk_write_extent, meanwhile,
repair the endianness problem of lba field which shall also be converted
to little-endian before storing to disk.
Cc: qemu-stable@nongnu.org
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20161216052040.53067-2-haoqf@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
@bs doesn't always have a device name, such as when it comes from
"qemu-img info". Report file name instead.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170119130759.28319-2-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
