We're about to add a new section to gdb.rst. In
preparation, add some more headings so it isn't just
one huge run-on section.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210325175023.13838-2-peter.maydell@linaro.org>
Message-Id: <20210401102530.12030-9-alex.bennee@linaro.org>
Depending on the version of gdb we may not execute the first line of
SHA1Init when executing the first "next" command - instead just
stepping over the preamble. As we don't actually care about the
position of the PC after the steps and want to be sure the
context->state[] has been loaded before we inspect it do a double next
at the start.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-8-alex.bennee@linaro.org>
The containerised compiler defaults to no-pie anyway but if we are
relying on the users installed cross compiler we need to check it
works for building 16 bit code first.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210401102530.12030-7-alex.bennee@linaro.org>
Newer compilers might end up putting some data in .data.rel.local
which was getting skipped resulting in hilarious confusion on some
tests. Fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-6-alex.bennee@linaro.org>
While it's hard to find cross compilers packaged for arches other than
x86_64 the same cannot be said for the x86_64 compiler which is
available on Debians i386, arm64 and ppc64el release architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-5-alex.bennee@linaro.org>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Currently our gitlab registry is x86_64 only so attempting to pull an
image from it on something else will end in tears.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-3-alex.bennee@linaro.org>
You don't usually notice this is broken on developer system on x86 as
we use the normal host compiler. However on other systems the -pc was
extraneous. Also for 32 bit only i686 packages exist now so we should
use those when available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401102530.12030-2-alex.bennee@linaro.org>
The check for `n->namespace.blkconf.blk` always fails because
this is in the initialization function.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch handles icount mode for timer read/write instructions,
because it is required to call gen_io_start in such cases.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <161700373035.1135822.16451510827008616793.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The addrl used to compare with SoftTLB entry should be sign-extended
in common case, and it will cause constant failing in SoftTLB
comparisons for the addrl whose address is over 0x80000000 on the
emulation of 32-bit guest on 64-bit host.
This is an important performance bug fix. Spec2000 gzip rate increase
from ~45 to ~140 on Loongson 3A4000 (MIPS compatible platform).
Signed-off-by: Kele Huang <kele.hwang@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401100457.191458-1-kele.hwang@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The description was originally removed in commit 578d914b26
("hw/block/nvme: align zoned.zasl with mdts") together with the removal
of the zoned.append_size_limit parameter itself.
However, it was (most likely accidentally), re-added in commit
f7dcd31885 ("hw/block/nvme: add non-mdts command size limit for verify").
Remove the description again, since the parameter it describes,
zoned.append_size_limit, no longer exists.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
xtensa_modules variable defined in each xtensa-modules.c.inc is only
used locally by the including file. Make it static.
Reported-by: Yury Gribov <tetra2005@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
import_core.sh tries to change Makefile.objs when importing new xtensa
core, but that file no longer exists. Rewrite meson.build rule to pick
up all source files that match core-*.c pattern and drop commands that
change Makefile.objs.
Cc: qemu-stable@nongnu.org # v5.2.0
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Some small documentation updates
* Some small misc fixes
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmBlvO8RHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbVwEBAAj2t78g5aGHITdV1y7c+frYF/nctKzYyj
OmYegJPCl8JoIdekdhADcDqSLGJ7EabirzGdmksmj1i1eAeRC5ASi06r4zJEc50Q
VE+sw2nWVPXcAQsRwpAIZ1Isq5zvfaRCOWbNU2/D1QR7XEQ0PZrhiW43zErnyhM/
pt0iZ0BSAc7VE7OsXIBLfOYJwpkTIgikX3B/Mrwo6Yjr/17pjnfz+zCzOo/9JeUq
rf6toiVc4LUIc/D62qWptSmrVYNSMJGbEWZmbmO30YDP4PSLI1c61KyXjLomia/V
6dGFFuQBIY6jIKPWCNsZ9khVxZX/fK4Er2X9tbj4zr+WH9sM87IGCMml+VKmua3C
U5r8n8zucdgtEBa0u+akOG8N3exRrgg4UNO5/uTLN3dBJONfYan+/hkitJfp7Oe0
5G6QM+d9CyOw1nzCf0DAzenhgvMjtREYBrw3fRHtXf5pl6hdpqJqUhfszIGburES
yyWAJKnnlBGTgqILLUX8ycsCLhDKkk7FvCyyifo7fieeFDuSQHUIrKaPQiVm0ter
Jo5wWdZh5LX5UUcg9Wyss3t6Xnr3qPTKtLAAcSROQFrSGaR7T2TAPW3wp3hpcEgo
NqisC7XbtwJTt1IEdNrnqgSpXuaus+on/NLTp5Nm9XgNTQY7aJeKmDjhMvv23H0j
DfW4QIxSdXY=
=nOMd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-04-01' into staging
* Updates for the MAINTAINERS file
* Some small documentation updates
* Some small misc fixes
# gpg: Signature made Thu 01 Apr 2021 13:30:39 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-04-01:
device-crash-test: Ignore errors about a bus not being available
docs: Fix typo in the default name of the qemu-system-x86_64 binary
docs: Remove obsolete paragraph about config-target.mak
util/compatfd.c: Fixed style issues
qom: Fix default values in help
MAINTAINERS: Mark SH-4 hardware emulation orphan
MAINTAINERS: Mark RX hardware emulation orphan
MAINTAINERS: add virtio-fs mailing list
MAINTAINERS: Drop the line with Xiang Zheng
MAINTAINERS: replace Huawei's email to personal one
MAINTAINERS: Drop the lines with Sarah Harris
MAINTAINERS: add/replace backups for some s390 areas
MAINTAINERS: Fix tests/migration maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a device model
(a) doesn't set the value to a correct interrupt number and then
(b) triggers an interrupt for itself,
it's device model bug. Add assert on interrupt pin number to catch
this kind of bug more obviously.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <9cf8ac3b17e162daac0971d7be32deb6a33ae6ec.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
This patch adds reset ACPI PM related registers on vt82c686 reset time
and de-assert sci.
via_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <0a3fe998525552860919a690ce83dab8f663ab99.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
The function was introduced by commit
eaba51c573 (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic)
that forgot to actually call it at piix4 reset time and as result
SCI_EN wasn't set as was expected by 6be8cf56bc in acpi_only mode.
So Windows crashes when it notices that SCI_EN is not set and FADT is
not providing information about how to enable it anymore.
Reproducer:
qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso
Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time.
Occasionally this patch adds reset acpi PM related registers on
piix4 reset time and de-assert sci.
piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset. pm_reset() in ich9.c correctly calls
corresponding reset functions.
Fixes: 6be8cf56bc (acpi/core: always set SCI_EN when SMM isn't supported)
Reported-by: Reinoud Zandijk <reinoud@NetBSD.org>
Co-developed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value is assigned later in this procedure.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1743098
This commit completes the solution of segfault in hot unplug flow
(by commit ccec7e9603).
Added missing check for vdev in virtio_pci_isr_read.
Typical stack of crash:
virtio_pci_isr_read ../hw/virtio/virtio-pci.c:1365 with proxy-vdev = 0
memory_region_read_accessor at ../softmmu/memory.c:442
access_with_adjusted_size at ../softmmu/memory.c:552
memory_region_dispatch_read1 at ../softmmu/memory.c:1420
memory_region_dispatch_read at ../softmmu/memory.c:1449
flatview_read_continue at ../softmmu/physmem.c:2822
flatview_read at ../softmmu/physmem.c:2862
address_space_read_full at ../softmmu/physmem.c:2875
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-2-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been
finalized before the vhost-user-blk.
This happens with char-socket chardev operating in the listening mode (server).
The char-socket chardev emits "close" event at the end of finalizing when
its internal data is destroyed. This calls vhost-user-blk event handler
which in turn tries to manipulate with destroyed chardev by setting an empty
event handler for vhost-user-blk cleanup postponing.
This patch separates the shutdown case from the cleanup postponing removing
the need to set an event handler.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 4bcad76f4c ("vhost-user-blk: delay vhost_user_blk_disconnect")
introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts
because of connection problems with vhost-blk daemon.
However, it introdues a new problem. Now, any communication errors
during execution of vhost_dev_init() called by vhost_user_blk_device_realize()
lead to qemu abort on assert in vhost_dev_get_config().
This happens because vhost_user_blk_disconnect() is postponed but
it should have dropped s->connected flag by the time
vhost_user_blk_device_realize() performs a new connection opening.
On the connection opening, vhost_dev initialization in
vhost_user_blk_connect() relies on s->connection flag and
if it's not dropped, it skips vhost_dev initialization and returns
with success. Then, vhost_user_blk_device_realize()'s execution flow
goes to vhost_dev_get_config() where it's aborted on the assert.
To fix the problem this patch adds immediate cleanup on device
initialization(in vhost_user_blk_device_realize()) using different
event handlers for initialization and operation introduced in the
previous patch.
On initialization (in vhost_user_blk_device_realize()) we fully
control the initialization process. At that point, nobody can use the
device since it isn't initialized and we don't need to postpone any
cleanups, so we can do cleaup right away when there is a communication
problem with the vhost-blk daemon.
On operation we leave it as is, since the disconnect may happen when
the device is in use, so the device users may want to use vhost_dev's data
to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()).
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to use different connect/disconnect event handlers
on device initialization and operation as seen from the further
commit fixing a bug on device initialization.
This patch refactors the code to make use of them: we don't rely any
more on the VM state for choosing how to cleanup the device, instead
we explicitly use the proper event handler depending on whether
the device has been initialized.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recent QEMU versions now sometimes exit cleanly with an error message
that a bus is not available for a specified device. Don't flag those
as an error in the device-crash-test script.
Message-Id: <20210323164718.1393792-1-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's a '-' between 'qemu' and 'system', not a '_'.
Fixes: 324b2298fe ("docs/system: convert Texinfo documentation to rST")
Message-Id: <20210401051829.3169438-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
$TARGET-NAME/config-target.mak has been removed a while ago.
Remove it now from the documentation, too.
Fixes: fdb75aeff7 ("configure: remove target configuration")
Message-Id: <20210316124208.455456-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Output of default values in device help is broken:
$ ./qemu-system-x86_64 -S -display none -monitor stdio
QEMU 5.2.50 monitor - type 'help' for more information
(qemu) device_add pvpanic,help
pvpanic options:
events=<uint8> - (default: (null))
ioport=<uint16> - (default: (null))
pvpanic[0]=<child<qemu:memory-region>>
The "(null)" is glibc printing a null pointer. Other systems crash
instead. Having a help request crash a running VM can really spoil
your day.
Root cause is a botched replacement of qstring_free() by
g_string_free(): to get the string back, we need to pass true to the
former, but false to the latter. Fix the argument.
Fixes: eab3a4678b
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210324084130.3986072-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the SH-4 hardware as orphan to give the possibility
to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Magnus Damm <magnus.damm@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-3-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Yoshinori Sato doesn't have time to manage QEMU reviews.
The code is in good shape and hasn't started to bitrot,
so mark the RX target and hardware as orphan to give the
possibility to any contributor to step in and fill the gap.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210312155513.1849109-2-f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
General discussion and patch reviews take place on this list for both
virtiofsd (tools/virtiofsd/*) and the guest kernel module.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210318154157.1357224-1-ckuehl@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When sending a mail with CC: to zhengxiang9@huawei.com I got a mail
back saying:
Your message couldn't be delivered
The message you sent to zhengxiang9@huawei.com couldn't be delivered due to:
Recipient email address is possibly incorrect.
Further information
5.1.1 <zhengxiang9@huawei.com>: Recipient address rejected: Failed recipient
validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify
from ldap failed (in reply to RCPT TO command)
Looks like this address does not exist anymore, thus drop it from the
MAINTAINERS file.
Message-Id: <20210401065343.3197791-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to conveniently receive email, replace the Huawei
email address with my personal one.
Signed-off-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-Id: <1615462144-10864-1-git-send-email-gengdongjiu1@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a mail to the qemu-devel mailing list, Sarah wrote:
"I was added as a reviewer (in MAINTAINERS) for the AVR target for the
duration of my research work using it.
The funding for my project expires in the middle of April, so I will not be
able to provide time for reviewing patches from that point."
Thus let's remove the corresponding lines in the MAINTAINERS file.
Message-Id: <20210401062426.3192118-1-thuth@redhat.com>
Reviewed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When changing from chardev-socket (which supports yank) to
chardev-socket again, it fails, because the new chardev attempts
to register a new yank instance. This in turn fails, as there
still is the yank instance from the current chardev. Also,
the old chardev shouldn't unregister the yank instance when it
is freed.
To fix this, now the new chardev only registers a yank instance if
the current chardev doesn't support yank and thus hasn't registered
one already. Also, when the old chardev is freed, it now only
unregisters the yank instance if the new chardev doesn't need it.
If the initialization of the new chardev fails, it still has
chr->handover_yank_instance set and won't unregister the yank
instance when it is freed.
s->registered_yank is always true here, as chardev-change only works
on user-visible chardevs and those are guraranteed to register a
yank instance as they are initialized via
chardev_new()
qemu_char_open()
cc->open() (qmp_chardev_open_socket()).
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <9637888d7591d2971975188478bb707299a1dc04.1617127849.git.lukasstraub2@web.de>
Always pass the id to chardev_new, since it is needed to register
the yank instance for the chardev. Also, after checking that
nothing calls chardev_new with id=NULL, assert() that id!=NULL.
This fixes a crash when using chardev-change to change a chardev
to chardev-socket, which attempts to register a yank instance.
This in turn tries to dereference the NULL-pointer.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <3e669b6c160aa7278e37c4d95e0445574f96c7b7.1617127849.git.lukasstraub2@web.de>
Move object_property_try_add_child out of chardev_new into it's
callers. This is a preparation for the next patches to fix yank
with the chardev-change case.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Li Zhang <li.zhang@cloud.ionos.com>
Message-Id: <b2a5092ec681737bc3a21ea16f3c00848b277521.1617127849.git.lukasstraub2@web.de>
Yank now only depends on util and can be always linked in. Also remove
the stubs as they are not needed anymore.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <997aa12a28c555d8a3b7a363b3bda5c3cf1821ba.1616521341.git.lukasstraub2@web.de>
Remove dependency on qiochannel by removing yank_generic_iochannel and
letting migration and chardev use their own yank function for
iochannel.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
Now that we merged into one doc, it makes the nav looks nicer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210323074704.4078381-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This commit fixes an issue where migration is failing in the load phase
because of a false alarm about data unavailability.
Following is the error received when the amount of data to be transferred
exceeds the default buffer size setup by G_BUFFERED_INPUT_STREAM(4KiB),
even when the maximum data size supported by this backend is 1MiB
(DBUS_VMSTATE_SIZE_LIMIT):
dbus_vmstate_post_load: Invalid vmstate size: 4364
qemu-kvm: error while loading state for instance 0x0 of device 'dbus-vmstate/dbus-vmstate'
This commit sets the size of the input stream buffer used during load to
DBUS_VMSTATE_SIZE_LIMIT which is the maximum amount of data a helper can
send during save phase.
Secondly, this commit makes sure that the input stream buffer is loaded before
checking the size of the data available in it, rectifying the false alarm about
data unavailability.
Fixes: 5010cec2bc ("Add dbus-vmstate object")
Signed-off-by: Priyankar Jain <priyankar.jain@nutanix.com>
Message-Id: <cdaad4718e62bf22fd5e93ef3e252de20da5c17c.1612273156.git.priyankar.jain@nutanix.com>
[ Modified printf format for gsize ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
g_hash_table_add always retains ownership of the pointer passed in as
the key. Its return status merely indicates whether the added entry was
new, or replaced an existing entry. Thus key must never be freed after
this method returns.
Spotted by ASAN:
==2407186==ERROR: AddressSanitizer: heap-use-after-free on address 0x6020003ac4f0 at pc 0x7ffff766659c bp 0x7fffffffd1d0 sp 0x7fffffffc980
READ of size 1 at 0x6020003ac4f0 thread T0
#0 0x7ffff766659b (/lib64/libasan.so.6+0x8a59b)
#1 0x7ffff6bfa843 in g_str_equal ../glib/ghash.c:2303
#2 0x7ffff6bf8167 in g_hash_table_lookup_node ../glib/ghash.c:493
#3 0x7ffff6bf9b78 in g_hash_table_insert_internal ../glib/ghash.c:1598
#4 0x7ffff6bf9c32 in g_hash_table_add ../glib/ghash.c:1689
#5 0x5555596caad4 in module_load_one ../util/module.c:233
#6 0x5555596ca949 in module_load_one ../util/module.c:225
#7 0x5555596ca949 in module_load_one ../util/module.c:225
#8 0x5555596cbdf4 in module_load_qom_all ../util/module.c:349
Typical C bug...
Fixes: 90629122d2 ("module: use g_hash_table_add()")
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210316134456.3243102-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
