This will enable support for 'dumpdtb' QMP/HMP command for the
virtex_ml507 machine.
Setting machine->fdt requires a MachineState pointer to be used inside
xilinx_load_device_tree(). Let's change the function to receive this
pointer from the caller. kernel_cmdline' can be retrieved directly from
the 'machine' pointer. 'ramsize' wasn't being used so can be removed.
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-11-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sam460ex
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
sam460ex_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-10-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for the bamboo
machine.
Setting machine->fdt requires a MachineState pointer to be used inside
bamboo_load_device_tree(). Let's change the function to receive this
pointer from the caller. 'ramsize' and 'kernel_cmdline' can be retrieved
directly from the 'machine' pointer.
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-9-danielhb413@gmail.com>
This will enable support for 'dumpdtb' QMP/HMP command for all nios2
machines that uses nios2_load_dtb().
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-7-danielhb413@gmail.com>
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
In spapr_phb_children_reset() we call device_legacy_reset() to reset any
QOM children of the SPAPR PCI host bridge device. This will not reset
any qbus such a child might own. Switch to device_cold_reset(), which will
reset both the device and its buses. (If the child has no qbuses then
there will be no change in behaviour.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221014142841.2092784-1-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Vector instructions in general are not supposed to change the FI bit.
However, xvcmp* instructions are calling gen_helper_float_check_status,
which is leading to a cleared FI flag where it should be kept
unchanged.
As helper_float_check_status only affects inexact, overflow and
underflow, and the xvcmp* instructions don't change these flags, this
issue can be fixed by removing the call to helper_float_check_status.
By doing this, the FI bit in FPSCR will be preserved as expected.
Fixes: 00084a25ad ("target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221005121551.27957-1-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that the MPC8544DS board also has a platform bus, the if statement
is always true.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-8-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Models the real device more closely.
Address and size values are taken from mpc8544.dts from the linux-5.17.7
tree. The IRQ range is taken from e500plat.c.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-7-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-6-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PlatformBusDevice has an mmio attribute which gets aliased to
SysBusDevice::mmio[0]. So PlatformbusDevice::mmio can be used directly,
avoiding the sysbus API.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221003203142.24355-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The sudden change of topics is slightly confusing and makes the
networking information less visible. So separate the networking chapter
to improve comprehensibility.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-4-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Having a dedicated config switch makes dependency handling cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-3-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Gives users more fine-grained control over what should be compiled into
QEMU.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221003203142.24355-2-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are used by both the SDRAM controller model and system DCRs. In
preparation to move SDRAM controller in its own file move these macros
to the ppc4xx.h header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <74d9bf4891e2ccceb52bb6ca6b54fd3f37a9fb04.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc440_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr2. This is mostly
modelling the DDR2 SDRAM controller found in the 460EX (used on the
sam460ex board). Newer SoCs (regardless of their PPC core, e.g. 405EX)
may have this controller but we only emulate enough of it for the
sam460ex u-boot firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3e82ae575c7c41e464a0082d55ecb4ebcc4d4329.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the check for valid memory sizes from board to sdram controller
init. This adds the missing valid memory sizes of 16 and 8 MiB to the
DoC and the board now only checks for additional restrictions imposed
by its firmware then sdram init checks for valid sizes for SoC.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <41da3797392acaacc7963b79512c8af8005fa4b0.1664021647.git.balaton@eik.bme.hu>
[danielhb: avoid 4*GiB size due to 32 bit build problems]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename functions to avoid name clashes when moving the DDR2 controller
model currently called ppc440_sdram to ppc4xx_devs. This also more
clearly shows which function belongs to which model.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <9c09d10fbf36940ebbe30d7038d69cf3f2e58371.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename local sdram variable in ppc440_sdram_init to s for readability.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <7351b80fa321c32a6229e685dfdc940232f8b788.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To allow removing the do_init hack we need to improve the DDR2 SDRAM
controller model to handle the enable/disable bit that it ignored so
far.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <f8900aadb1a4426a6444741e6876c898b3b77f7b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Constants that are written zero padded for no good reason are hard to
read, it's easier to see what is meant if it's just 0 or 1 instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <93974622c3d398c7d3a3488b678b74c3807849de.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc4xx_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly
modelling the DDR SDRAM controller found in the 440EP (used on the
bamboo board) but also backward compatible with the older DDR
controllers on some 405 SoCs so we also use it for those now. This
likely does not cause problems for guests we run as the new features
are just not accessed but to model 405 SoC accurately some features
may have to be disabled or the model split between 440 and older.
Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an
updated DDR2 SDRAM controller implemented by the ppc440_sdram model
(only partially, enough for the 460EX on the sam460ex) that is not yet
QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2
when QOM'ified later.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of checking if memory size is valid in board code move this
check to ppc4xx_sdram_init() as this is a restriction imposed by the
SDRAM controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <39e5129dd095b285676a6267c5753786da1bc30d.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change ppc4xx_sdram_banks() to take one Ppc4xxSdramBank array instead
of the separate arrays and adjust ppc4xx_sdram_init() and
ppc440_sdram_init() accordingly as well as machines using these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <e3a1fea51f29779fd6a61be90a29c684f3299544.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The do_init parameter of ppc4xx_sdram_init() is used to map memory
regions that is normally done by the firmware by programming the SDRAM
controller. Do this from board code emulating what firmware would do
when booting a kernel directly from -kernel without a firmware so we
can get rid of this do_init hack.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of storing sdram bank parameters in unrelated arrays put them
in a struct so it's clear they belong to the same bank and simplify
the state struct using this bank type.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5eb82d0424c584b2b9e6f7bc51560f8189ed21bb.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In ppc4xx_sdram_init() the struct is allocated with g_new0() so no
need to clear its elements. In the bamboo machine init memset can be
replaced with array initialiser which is shorter.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <529adc7705fb3e3e777439895bdaa136bacb9403.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This partially reverts commit 9dc20cc37d ("target/ppc: Simplify
powerpc_excp_booke"), which removed DOORI and DOORCI interrupts.
Without this patch, a -cpu e5500 -smp 2 machine booting Linux
crashes with:
qemu: fatal: Invalid PowerPC exception 36. Aborting
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220924114436.1422786-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
I am not active anymore on the PPC maintainership, degrade my self as
standard Reviewer. Also degrade PowerNV and XIVE status since I am not
funded for this work.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929180946.848721-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In ipi_send function, it should not to set irq before
writing data to dest cpu iocsr space, as the irq will
trigger after data writing.
When call this function 'address_space_stl()', it will
trigger loongarch_ipi_writel(), the addr arg is 0x1008
('CORE_SET_OFF'), and qemu_irq_raise will be called in
this case.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220930095139.867115-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Previously the 32-bit version was incorrectly chosen, leading to funny
but incorrect output from e.g. df(1). Simply select the version
corresponding to the 64-bit asm-generic definition.
For reference, this program should produce the same output no matter
natively compiled or not, for loongarch64 or not:
```c
#include <stdio.h>
#include <sys/statfs.h>
int main(int argc, const char *argv[])
{
struct statfs b;
if (statfs(argv[0], &b))
return 1;
printf("f_type = 0x%lx\n", b.f_type);
printf("f_bsize = %ld\n", b.f_bsize);
printf("f_blocks = %ld\n", b.f_blocks);
printf("f_bfree = %ld\n", b.f_bfree);
printf("f_bavail = %ld\n", b.f_bavail);
return 0;
}
// Example output on my amd64 box, with the test binary residing on a
// btrfs partition.
// Native and emulated output after the fix:
//
// f_type = 0x9123683e
// f_bsize = 4096
// f_blocks = 268435456
// f_bfree = 168406890
// f_bavail = 168355058
// Output before the fix, note the messed layout:
//
// f_type = 0x10009123683e
// f_bsize = 723302085239504896
// f_blocks = 168355058
// f_bfree = 2250817541779750912
// f_bavail = 1099229433104
```
Fixes: 1f63019632 ("linux-user: Add LoongArch syscall support")
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006100710.427252-1-xen0n@gentoo.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
logB(0) should raise divideByZero exception from IEEE 754-2008 spec 7.3
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220930024510.800005-4-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220930024510.800005-3-gaosong@loongson.cn>
use gen_bstrins/gen_bstrpic to replace gen_rr_ms_ls.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220930024510.800005-2-gaosong@loongson.cn>
Since commit 4047368938 "accel/tcg: Introduce tlb_set_page_full" we
have been seeing this assert
../accel/tcg/cputlb.c:1294: tlb_set_page_with_attrs: Assertion `is_power_of_2(size)' failed.
When running Tock on the OpenTitan machine.
The issue is that pmp_get_tlb_size() would return a TLB size that wasn't
a power of 2. The size was also smaller then TARGET_PAGE_SIZE.
This patch ensures that any TLB size less then TARGET_PAGE_SIZE is
rounded down to 1 to ensure it's a valid size.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221012011449.506928-1-alistair.francis@opensource.wdc.com
Message-Id: <20221012011449.506928-1-alistair.francis@opensource.wdc.com>
PLIC spec [1] requires interrupt source priority registers are WARL
field and the number of supported priority is power-of-2 to simplify SW
discovery.
Existing QEMU RISC-V machine (e.g. shakti_c) don't strictly follow PLIC
spec, whose number of supported priority is not power-of-2. Just change
each bit of interrupt priority register to WARL field when the number of
supported priority is power-of-2.
[1] https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-priorities
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The maximum priority level is hard-coded when writing to interrupt
priority register. However, when writing to priority threshold register,
the maximum priority level is from num_priorities Property which is
configured by platform.
Also change interrupt priority register to use num_priorities Property
in maximum priority level.
Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-2-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tested with https://github.com/ksco/rvv-decoder-tests
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: braces {} are necessary for all arms of this statement
Signed-off-by: Yang Liu <liuyang22@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220928051842.16207-1-liuyang22@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To enable both -kernel and -pflash options, the fw_cfg needs to be
created prior to loading the kernel.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the `rw1c` functionality to the respective
registers. The status fields are cleared when the respective
field is set.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220930033241.206581-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch addresses the coverity issues specified in [1],
as suggested, `FIELD_DP32()`/`FIELD_EX32()` macros have been
implemented to clean up the code.
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg887713.html
Fixes: Coverity CID 1488107
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220930033241.206581-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 4211fc5532 ("roms/opensbi: Remove ELF images"), the
comment for qtest check in riscv_find_firmware() is out of date.
Update it to reflect the latest status.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <BN7PR08MB435525C92550BAC5467BE672BF219@BN7PR08MB4355.namprd08.prod.outlook.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
