This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When running kvm-autotest, fputc() is often the second highest (sometimes #1)
function showing up in a profile. This is due to fputc() locking the file
for every byte written.
Optimize by buffering a line's worth of pixels and writing that out in a
single call.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This warning is new in gcc 4.6.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests. The device is necessary for PV on HVM drivers to work.
Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Compared to the last version I only added a comment to the code.
- remove i440FX-xen and i440fx_write_config_xen
we don't need to intercept pci config writes to i440FX anymore;
- introduce PIIX3-xen and piix3_write_config_xen
we do need to intercept pci config write to the PCI-ISA bridge to update
the PCI link routing;
- set the number of PIIX3-xen interrupts line to 128;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If the cirrus_vga PCI BAR is unmapped than we should not only reset
map_addr but also lfb_addr, otherwise we'll keep trying to map
the old lfb_addr in map_linear_vram.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This function will be used to support sync dirty bitmap.
This come with a check against every Xen release, and special
implementation for Xen version that doesn't have this specific call.
This function will not be usable with Xen 3.3 because the behavior is
different.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
As pci id initialization is moved to common layer,
some initialization function can be empty.
So don't call init method if NULL.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Register the smc91c111 reset function as a qdev reset function.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.
Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).
For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.
The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ccid_initfn() allocates CCIDBus dynamically, but there is no exit
callback to free it.
Fix by getting rid of the allocation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When qemu gets compiled without support of vhost-net, any attempt
to use it fails with a very clear error message:
qemu-system-x86_64: -netdev ...,vhost=on: vhost-net requested but could not be initialized
there's absolutely no reason given _why_ it coult not be
initialized, and even strace'ing the process in question
does not reveal any errors. So print a message telling
what's going on.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
expire_time must be initialited when the guest activates the
usb scheduler, not at device creation time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.
(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This causes an "Error: tried to detach unattached usb device " to be printed,
this can happen when deleting ie a usb host qdev, which did not
get attached (because a device matching the filter never got plugged in).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page. Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory. Also the transfer length updates for outgoing transfers wasn't
correct.
While being at it DPRINTFs have been replaced by tracepoints.
The isoch_pause logic has been disabled. Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds. Even when no xfer happens we have to clear the active bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB tablet advertises that it supports the "boot" protocol.
However, its reports aren't "boot" protocol compatible. So, it
shouldn't claim that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QEMU USB mouse claims to support the "boot" protocol
(bInterfaceSubClass is 1). However, the mouse rejects the
Set_Protocol command.
The qemu mouse does support the "boot" protocol specification, so a
simple fix is to enable the Set_Protocol request.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The state machine doesn't stop in EXECUTING state any more when async
packets are in flight, so the checks are not needed any more and can
be dropped.
Also kick out the check for the frame timer. As we don't stop & sleep
any more on async packets this is obsolete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed. The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set the correct bits for nodev, stall and babble errors.
Raise errint irq. Fix state transition from WRITEBACK
to the next state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two bugs at once:
First the mask is backwards, so the it used to keeps the offset and
clears the page address, which is not what we need when we update the
offset.
Second the offset calculation is wrong in case head isn't page aligned.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for keeping multiple queues going at the same
time. One slow device will not affect other devices any more.
The patch adds code to manage EHCIQueue structs. It also does a number
of changes to the state machine:
* The state machine will never ever stop in EXECUTING any more.
Instead it will continue with the next queue (aka HORIZONTALQH) when
the usb device returns USB_RET_ASYNC.
* The state machine will stop processing when it figures it walks in
circles (easy to figure now that we have a EHCIQueue struct for each
QH we've processed). The bailout logic should not be needed any
more. For now it is still in, but will assert() in case it triggers.
* The state machine will just skip queues with a async USBPacket in
flight.
* The state machine will resume processing as soon as the async
USBPacket is finished.
The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.
It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them. This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add EHCIQueue struct, move the fields needed to track the queue state
into that struct. Pass the new struct instead of ehci state down to
functions which handle the queue state. Lot of variable references have
changed due to that without an actual functional change.
Replace fetch_addr with two variables, one for async and one for
periodic schedule. Add functions to get and set the fetch address.
Use EHCIQueue->usb_status (old name: EHCIState->exec_status) directly in
ehci_execute_complete instead of passing around the status using a
parameters and the return value.
ehci_state_fetchqh returns a EHCIQueue struct now.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
